This Solicitation opportunity from Department Of Defense was posted on August 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
HINGE, BUTT
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract specifies the procurement of a 72-inch butt hinge identified by NSN 5340-00-664-8118 and part number MS20001P6-7200, manufactured in strict compliance with the current revision of the military part standard MS20001P and Technical Data Package Rev A Gen 1. The item is classified as a critical application component and must be produced to meet all applicable technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which supersedes any commercial standards such as ASTM D3951. Full and open competition is permitted under a Women-Owned Small Business Set-Aside, with solicitation responses due by August 6, 2026, and award intended to be automated based on compliance and pricing. Delivery is required 168 days after order date, with a firm delivery date of April 20, 2027, and goods must be shipped FOB Origin to the DLA Distribution Depot in Tinker AFB, Oklahoma. Inspection and acceptance occur at the origin, and the contractor is responsible for ensuring all items meet the exacting standards of MIL-STD-130N for identification marking, including mandatory Data Matrix barcodes, and MIL-STD-129 for labeling and packaging. Packaging must adhere to RP001 DLA requirements and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials as defined by FED-STD-313, with all containers clearly marked. The contract mandates compliance with comprehensive cybersecurity protections under DFARS 252.204-7012 and NIST SP 800-171, requires electronic invoicing and receiving reports via WAWF, and prohibits the use of foreign-flag vessels for ocean shipments unless prior authorization is obtained. All subcontractors must flow down hazardous materials labeling and ocean transport restrictions. Offerors must be certified in SAM.gov as Women-Owned Small Businesses, maintain active UEI and CAGE codes, and submit accurate representations regarding size status and socioeconomic eligibility. The contract incorporates multiple FAR and DFARS clauses governing equal opportunity, combating trafficking, employment eligibility, sustainable products, and unauthorized obligations, with deviations applied to changes and subcontract provisions. No unit pricing or total contract value is provided, and the award is expected to be based on technical acceptability and lowest price under a
General Info
Agency
NAICS
Place of Performance
3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
HINGE, BUTT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD DEFINING THIS ITEM IS ACCEPTABLE. HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT, REVISION OF THE STANDARD IS ACCEPTABLE. ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD, SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE PART STANDARD IN QUESTION.
FULL AND OPEN COMPETITION APPLY
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
,,
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
NSN requires the hinge to be 72 inches long
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MS20001P NOT 2 REVISION NR P DTD 11/24/2021 PART PIECE NUMBER: MS20001P6-7200
SPE7M4-26-T-285E
SECTION B
PR: 7017602128 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017602128 0001 EA 412.000
NSN/MATERIAL:5340006648118
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/19/2027
SPE7M4-26-T-285E
SECTION B
PR: 7017602128 PRLI: 0001 CONT’D
Original Required Delivery Date:04/20/2027
SPE7M4-26-T-285E NSN/Part Number: 5340-00-664-8118 Quantity: 412 EA Purchase Request: 7017602128QTY: 412 Delivery: 168 days ADO
More opportunities from Department Of Defense → FLUID HANDLING DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS