Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

HINGE, DOOR, AIRCRAFT

Active
SPE4A7-26-T-603KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of two aircraft door hinges identified by NSN 1560-01-453-6678, with delivery due in 763 days after order. The item is subject to stringent export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within the United States, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and authorized access may receive the technical data. The solicitation is a total small business set-aside under NAICS code 336413, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance required at Robins Air Force Base, Georgia. The solicitation number is SPE4A7-26-T-603K, posted on July 30, 2026, with responses due by August 7, 2026. The primary point of contact is Jahaida Hall Hudson, reachable via email and phone provided. The procurement is governed by additional requirements including CMMC Level 2 certification for third-party assessors and DLA packaging standards.

General Info

Procure two ITAR/EAR-controlled aircraft door hinges for Robins AFB with small business set-aside and strict export compliance.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts

Full Description

Show more
HINGE,DOOR,AIRCRAFT
HINGE,DOOR,AIRCRAFT
68A413403-2004
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1560-01-453-6678 Quantity: 2 EA Purchase Request: 7017696918QTY: 2 Delivery: 763 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
SEAL, DRAIN
Solicitation # SPE4A7-26-T-326Y
The contract pertains to the procurement of 32 units of a SEAL, DRAIN with part number 3-70254-7 and NSN 1560-00-563-7344, under solicitation SPE4A7-26-T-326Y. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions controlled based on the acquisition type and solicitation timeline. The item is subject to stringent documentation and compliance protocols including Source Approval Request procedures, Cybersecurity Maturity Model Certification Level 2 requirements, and DLA packaging standards. Configuration changes must be managed through formal Engineering Change Proposals, and any deviations or waivers require formal request and approval. Inspection and acceptance occur at the manufacturer’s origin, and non-accepted supplies must have all government identification removed. Physical identification of the bare item is required, though Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies. Compliance requires that contractors hold approved US/Canada Joint Certification Program status, complete mandatory DOD export control training, and pass the DLA Export-Controlled Technical Data Questionnaire. Delivery is required within 113 days of award, with the place of performance specified as New Cumberland, PA, 17070-5002. The solicitation was posted on July 30, 2026, with responses due by August 4, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. Primary point of contact is Sara Duran Campos, reachable via email and phone provided in the contract data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
MANIKIN, RESUSCITATION
Solicitation # SPE2DH-26-T-5674
The contract specifies the procurement of a single set of an adult CPR training manikin designed for resuscitation instruction, featuring a medium skin tone and gender-neutral appearance. The manikin is equipped with an integrated CPR rate monitor that uses LED lights to indicate when chest compressions are delivered at the recommended rate of 100 to 120 per minute and produces an audible clicking sound to confirm proper compression depth. It operates on two AA batteries and includes ten face shield/lung bag assemblies along with a durable nylon carry case for storage and transport. The unit of issue is defined as a set, and the item is identified by NSN 6910-01-708-0577 under purchase request 7017681778. The solicitation is issued under SPE2DH-26-T-5674 with a response deadline of August 6, 2026, and requires delivery within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced under RP001 and RA001, with compliance determined by the applicable revision date based on solicitation or award timing. The contract falls under NAICS code 336413 and is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact. The place of performance is listed as FPO with zip code 96691, and government identification must be removed from any non-accepted supplies under RQ011.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
HOISTING UNIT, AIRCRAFT
Solicitation # SPE4A5-26-T-316Q
The contract is for the procurement of four hoisting units, aircraft component, identified by part number A27024-55 and NSN 1730-01-632-9291, under solicitation SPE4A5-26-T-316Q. Delivery is required in 473 days, with a firm delivery date of November 24, 2027, and all units must be shipped FOB origin with zero variance in quantity. Inspection and acceptance occur at the destination, specifically the DLA Distribution facility in New Cumberland, Pennsylvania. The units must comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951, and packaging must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements. Unit of issue is each, with a total value of $4, confirmed by the purchase request 7017695580. The item is designated as a critical application item, subject to stringent quality controls including ISO 9001:2015 requirements, CMMC Level 2 self-assessment, and configuration change management via engineering change proposals. Sampling must follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No unit identification is required per customer request, and all documentation must reflect required compliance with defense information protocols, measuring equipment standards, and DLA-specific procedural notes for transportation and shipping.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-591P
The contract specifies the procurement of 430 units of a spacer sleeve with NSN 5365-01-051-6671 under solicitation SPE4A7-26-T-591P, issued as a total small business set-aside with NAICS code 332510. Delivery is due within 241 days of award, FOB origin, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including preservative method 33, drying, preservative material 49, and wrapping with GB material, all packaged in unit container E5 with OPI marking and intermediate container E5, labeled with pack code U. Marking follows MIL-STD-129 with no special codes required. All packaging and palletization adhere to DLA’s RP001 requirements, and the shipment must be sent to the designated delivery address at Hill Air Force Base, Utah. The component is identified as a critical application item with approved part numbers from Rolls-Royce Solutions America Inc and Federal-Mogul Corporation. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional applications like batteries, fluorescent lights, sensors, weapon systems, and chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in samples unless otherwise stated, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation issue date for simplified acquisitions. The contract includes transportation guidelines from DLAD Proc Notes C19 and C20 and is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Richard Ellery as the primary point of contact.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION B
Solicitation # SPE4A7-26-T-590V
The contract pertains to the procurement of 159 units of a Commercial Off-the-Shelf (COTS) Terminal Junction Block, Sectional, with NSN 5940-01-185-5550 and part number 592840-1, manufactured by TE Connectivity Corporation. Delivery is required within 37 days of award, with an original required delivery date of July 9, 2026, and a need ship date of September 6, 2026. The item is to be delivered FOB Origin to DLA Distribution Jacksonville at Bldg 175 Swan Road, Jacksonville, FL 32212-0103, where government inspection and acceptance will occur. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including specific palletization requirements under RP001 and mandatory marking and labeling per MIL-STD-129, consistent with the Unit of Issue and Quantity per Unit Pack specified. Bar-coding is required as part of MIL-STD-129 compliance, and all packaging must be free of government identification if non-accepted. The solicitation number is SPE4A7-26-T-590V, issued under the DLA Master Solicitation for Automated Simplified Acquisitions, Revision 105, and is restricted to Women-Owned Small Businesses under the WOSB program with a NAICS code of 335999. Pricing is not explicitly stated but the contract is structured as a fixed-price arrangement under simplified acquisition procedures. All contractual obligations are governed by a comprehensive set of FAR and DFARS clauses including cybersecurity requirements under 252.204-7012, safeguarding of covered defense information, prohibitions on certain equipment and services, whistleblower protections, and electronic invoicing via WAWF. Offerors must validate their size status and socioeconomic certifications, particularly for WOSB eligibility, and disclose any covered defense telecommunications equipment or services using their Unique Entity ID and CAGE code. Technical compliance must align with the referenced Technical Data Package Revision A, and all submissions must be electronically filed through the DIBBS portal by July 30, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details