This Solicitation opportunity from Department Of Defense was posted on May 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HINGE, FAIRING, TRANS

Closed

SPE4A5-26-T-110UFederal

Submission Closed05/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

DIBBS

PIN, QUICK RELEASEThe contract involves the procurement of five units of a quick release pin identified by the National Stock Number 5315-00-883-2968. This solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 15, 2026, with a response deadline of June 23, 2026. The contract type is a solicitation, and there is no specified set-aside or NAICS code associated with it. The contract details indicate a federal organization as the issuer, but specific location information for both the office address and place of performance is not provided. While there is no contact information listed, further details and access to the solicitation can be obtained through the Defense Logistics Agency’s bidding platform. This contract seeks to fulfill a straightforward acquisition for the Department of Defense’s supply requirements.

Defense Logistics Agency

POSTED

DEADLINE

NUTThe contract pertains to the procurement of 14 units of a item identified as "NUT" with NSN/Part Number 5310-01-248-1076. The solicitation, numbered SPE4A6-26-T-92S3, was posted by the Defense Logistics Agency under the Department of Defense on June 15, 2026. Interested parties were required to respond by June 23, 2026. This procurement is categorized as a solicitation and does not specify any set-aside type or NAICS code. The contract is managed by a federal organization, with performance details and specific office location information not disclosed. The solicitation can be accessed through the Defense Logistics Agency's bid board system.

Defense Logistics Agency

POSTED

DEADLINE

CHAIN, WELDLESSThe contract involves the procurement of 370 units of weldless chains identified by NSN/Part Number 4010-00-042-7913. It is a solicitation issued by the Defense Logistics Agency under the Department of Defense with the solicitation number SPE4A5-26-T-239P. The solicitation was posted on June 15, 2026, and the deadline for response is June 23, 2026. The contract does not specify any set-aside type or particular small business category restrictions and lacks details on the NAICS code. The place of performance and specific office address details were not provided. Interested parties can access additional information and submit their responses through the Defense Logistics Agency’s bidding system website.

Defense Logistics Agency

POSTED

DEADLINE

LEAF, BUTT HINGEThe contract pertains to the procurement of a leaf butt hinge with the National Stock Number 5340-00-192-4090. A total quantity of five units has been requested under purchase request number 7016088362. This solicitation, identified by the number SPE7L1-26-T-706R, was issued by the Defense Logistics Agency, which operates under the Department of Defense. The solicitation was posted on June 15, 2026, and the deadline for responses is June 26, 2026. The contract is categorized as a federal solicitation with no specific set-aside type indicated. The place of performance and detailed office address information are not provided. The solicitation is accessible through the Defense Logistics Agency's procurement platform, ensuring that vendors can review and submit their responses within the specified timeframe. This contract reflects routine acquisition activity to support DoD operational requirements.

Defense Logistics Agency

POSTED

DEADLINE

CLAMP, LOOPThe contract pertains to the procurement of 20 units of a product identified as "CLAMP, LOOP" with the National Stock Number 5340-01-721-0178. The solicitation, numbered SPE7L1-26-T-707D, was posted on June 15, 2026, with a response deadline set for June 26, 2026. This solicitation was issued by the Defense Logistics Agency, a component of the Department of Defense, and is classified as a federal acquisition. While specific details such as set-aside status, NAICS code, and exact performance location are not provided, the contract is intended to support federal government operations. The official solicitation and submission processes are managed through the specified online procurement portal. This contract facilitates the timely acquisition of essential hardware components within established federal procurement guidelines.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The contract pertains to the procurement of five units of a commercial off-the-shelf item identified as HINGE, FAIRING, TRANSMISSION, with the National Stock Number 5340-00-471-4483 and part number 212-060-815-4. The solicitation number is SPE4A5-26-T-110U, issued by the Department of Defense's ASC Supplier OEM Division. The contract incorporates specific technical and quality requirements as outlined in the Defense Logistics Agency (DLA) Master List of Technical and Quality Requirements, including adherence to sampling plans per MIL-STD-1916 or equivalent, and compliance with packaging and marking standards such as MIL-STD-129 and ASTM D3951 unless overridden by DLA-specific guidelines. The item is not subject to Item Unique Identification but must meet tailored higher-level contract quality requirements. Delivery is scheduled with a need date of November 1, 2026, and a final required delivery date of December 24, 2028, with a delivery timeframe of 171 days from the order. The delivery and inspection points are at the destination, specifically DLA Distribution Cherry Point in North Carolina. Packaging must accommodate either hazardous or non-hazardous material standards per FED-STD-313 and DLA packaging requirements, with palletization conforming to contract stipulations. Transportation instructions reference DLAD procedural notes for shipping. The contract also includes provisions for removal of government identification from non-accepted supplies and specifies that all packaging and marking must comply with military specifications to ensure proper identification and handling. The primary contract point of contact is Kay Bates at the DLA.

General Info

Procurement of five HINGE, FAIRING, TRANSMISSION units; strict military packaging and quality compliance.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-110U.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 5

Solicitation

Response DeadlineMay 13

Deadline has passed

Submission Closed

05/13/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

Kay Bates

contact@example.gov

+1 (555) 000-0000

Full Description

HINGE,FAIRING,TRANS
HINGE,FAIRING,TRANSMISSION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
BELL TEXTRON INC 97499 P/N 212-060-815-4
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-110U
SECTION B
PR: 7016646202 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016646202 0001 EA 5.000
NSN/MATERIAL:5340004714483
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:11/01/2026 Original Required Delivery Date:12/24/2028
SPE4A5-26-T-110U NSN/Part Number: 5340-00-471-4483 Quantity: 5 EA Purchase Request: 7016646202QTY: 5 Delivery: 171 days ADO