HINGE HALF, FUS SIDE

The contract pertains to the procurement of 10 units of Hinge Half, FUS Side, identified by NSN 1620-01-577-5213 and part number 74A428052-1018, supplied by Boeing and Northrop Grumman under solicitations issued by the Defense Logistics Agency under contract number SPE4A7-26-Q-0520. Delivery is required within 200 days after order and is subject to firm fixed pricing with zero variance allowed. Inspection and acceptance both occur at the origin, and FOB terms are set at origin, meaning risk and responsibility transfer to the government upon shipment from the contractor’s facility. The item is designated as a critical application item and requires full compliance with Item Unique Identification (IUID) standards per MIL-STD-130 and DFARS 252.211-7003, including accurate electronic reporting of enterprise identifier, serial number, and CAGE code. All packaging and marking must strictly follow MIL-STD-129 and ASTM D3951, with DLA Master List of Technical and Quality Requirements superseding any conflicting requirements. Palletization must adhere to RP001: DLA Packaging Requirements for Procurement, and all shipments must be directed to DLA Distribution Jacksonville, FL, with transportation governed by DLAD Proc Notes C19 and C20. Technical compliance is governed by multiple DLA Master List requirements including RD002 for Covered Defense Information, RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification and bare item marking. Sampling and verification must comply with MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances mandated in the sample lot unless otherwise specified, and attributes are to be classified as Critical (VII/AQL 0.1), Major (IV/AQL 1.0), or Minor (II/AQL 4.0) based on drawing or quality assurance provisions. Cybersecurity requirements mandate adherence to CMMC Level 2 self-assessment, and measuring and test equipment must be calibrated and traceable. Documentation for source approval requests is required under RC001, and all materials are subject to inspection under FAR 52.246-2 and higher-level quality