Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HORN, LOUDSPEAKER

Active
SPE7M5-26-T-305KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 45 units of a horn loudspeaker with NSN 5965-01-723-7771, issued under solicitation number SPE7M5-26-T-305K by the Department of Defense’s Active Devices Division. The requirement is governed by DLA packaging and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect on the solicitation issue date. Items must strictly conform to the source-controlled drawing referenced in the solicitation, and only manufacturers with authorized access to the limited rights data specified in the documentation are eligible to quote. The government does not provide this data, and vendors must already possess it to respond. The solicitation emphasizes that even approved sources listed on the drawing must meet all technical specifications, and potential new suppliers seeking future qualification must contact the cognizant design activity named on the drawing. Performance is required at New Cumberland, PA with a delivery deadline of 105 days after order, and responses must be submitted by July 23, 2026. The NAICS code 334310 applies, and the point of contact for inquiries is Matthew Stanko, reachable via email and phone provided in the contract data.

General Info

DoD seeks 45 horn loudspeakers via DLA, solicitation open until July 20, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334310 - Audio and Video Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-305K for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Matthew Stanko
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HORN,LOUDSPEAKER
HORN,LOUDSPEAKER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
CITED DRAWING. OFFERORS WHO ARE INTERESTED
IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF
FUTURE ACQUISITION MUST CONTACT THE
COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE
SOURCE CONTROLLED DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
THIS TIME.
THIS ITEM MUST BE MANUFACTURED IN ACCORDANCE
WITH THE LIMITED RIGHTS DATA LISTED. THE
GOVERNMENT CANNOT PROVIDE THE DATA. ONLY THOSE
VENDORS WHO HAVE ACCESS TO THE DATA SHOULD
QUOTE.
THE PROCUREMENT AGENCY HAS DATA ADEQUATE FOR NSN/Part Number: 5965-01-723-7771 Quantity: 45 EA Purchase Request: 7017227268QTY: 45 Delivery: 105 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334310
New
SLED
Universal Shielded Balun SupplyThe contract involves the supply of Z-Balun Universal Free Hanging Shielded Baluns to support signal transmission infrastructure at DFW International Airport, specifically designated as a subcontract under NAICS code 334310, which corresponds to communications equipment manufacturing. The solicitation was posted on July 20, 2026, with a tight response deadline of July 23, 2026, indicating an urgent procurement timeline. The baluns are critical components for maintaining signal integrity in aviation communication and radar systems, requiring shielded, free-hanging designs to ensure electromagnetic compatibility and operational reliability in a high-interference environment. The effort is being managed by DFW International Airport in Texas, with no explicit set-aside provisions or point of contact provided, suggesting a competitive open bidding process among qualified vendors capable of delivering certified, mission-critical equipment to airport standards.
Dfw International Airport

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334310
New
DIBBS
Electrical Connector Supply (NSN: 5935010458083)The contract involves the supply and delivery of 69 units of a military-spec electrical connector identified by NSN 593501083, manufactured to meet MIL-DTL-55330 and other applicable defense standards. The delivery destination is Tinker Air Force Base in Oklahoma, ensuring the components are positioned for immediate integration into defense systems requiring certified interconnect solutions. The product must adhere strictly to military specifications to guarantee operational reliability under demanding environmental and performance conditions. Issued as a subcontract under the Defense Logistics Agency, the contract falls under NAICS code 334310, indicating its classification within the electronic component manufacturing sector. The solicitation is dated July 20, 2026, and the award is managed through the DLA’s procurement system with the contract identifier SPE7M126V050P. While no set-aside designation or point of contact is specified, the agreement underscores the Department of Defense’s ongoing requirement for standardized, high-integrity electrical connectors to support critical military infrastructure and equipment readiness.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

N/A
View Details
NAICS: 334310
New
DIBBS
Television Camera Supply and IntegrationThe contract calls for the supply of six military-spec television cameras under a small business set-aside program, reserved exclusively for small businesses as defined by the SBA. The equipment must meet stringent military standards for performance and durability, and all units must comply with specific packaging, labeling, and cybersecurity requirements to ensure operational security and logistics integrity. The work is to be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000, and the North American Industry Classification System code is 334310, indicating manufacturing of audio and video equipment. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the contracting entity is the Nuclear Reactor Program under the Department of Defense, operating as a subcontract opportunity through the DLA BSM system.
NUCLEAR REACTOR PROGRAM

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334310
New
SLED
Supply of 8-Port Video Hub (1U Rack Mount)The contract pertains to the supply and delivery of an 8-port 1U video hub model ZBT0100322, specifically designed for MATV signal distribution with operation at 54-SG0MHz and integrated AGC diagnostics to ensure signal integrity and performance monitoring. The equipment is configured for rack-mount installation and must meet precise technical specifications to support reliable video signal routing across large-scale distribution networks. Solicited as a subcontract under NAICS code 334310, the opportunity is issued by DFW International Airport under the Texas organizational structure, with a narrow response window closing just three days after posting on July 23, 2026. The delivery must occur to the airport’s specified location, with all units expected to be fully compliant with operational and diagnostic requirements without deviation.
Dfw International Airport

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334310
New
SLED
Supply of Shielded Baluns for MATV SystemsThe contract is for the supply and delivery of Z-Balun Universal Free Hanging Shielded Baluns, Model ZBT0010461, equipped with RS232 and IR control functionality, intended for integration into MATV systems. These devices are critical for signal distribution and interference mitigation in multi-dwelling or distributed antenna environments, ensuring reliable television and data transmission. The baluns must meet specific shielding and performance standards to operate effectively within the operational demands of the airport’s broadcast infrastructure. This is a subcontract opportunity posted by DFW International Airport under NAICS code 334310, which pertains to communications equipment manufacturing. The solicitation was released on July 20, 2026, with a firm response deadline of July 23, 2026, indicating a tight turnaround for proposals. While the place of performance and point of contact details are not specified, the procurement is managed through the DFW Airport’s Texas-based operations and must be fulfilled in accordance with the technical and logistical requirements of the MATV system upgrade. Bidders must ensure compliance with technical specifications and delivery timelines to qualify.
Dfw International Airport

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334310
New
DIBBS
High-Reliability Cable Assembly SupplyThe contract entails the supply of 20 units of a military-spec cable assembly identified by part number 7348822G7 and CAGE code 03538, with strict compliance to MIL-STD-130N for unique item identification marking and full traceability throughout the supply chain. All units must meet rigorous defense standards for reliability and documentation, ensuring each assembly is properly labeled and trackable from manufacture to delivery. The contract is classified as a subcontract under NAICS code 334310 and is issued by the Defense Logistics Agency, a component of the Department of Defense, with a posted date of July 20, 2026. Although no specific delivery location or point of contact is provided, the performance is expected to align with federal defense procurement protocols, and the associated award is accessible via the DIBBS portal under contract number SPE4A526P6813.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

N/A
View Details
NAICS: 334310
New
DIBBS
RF Cable Assembly Manufacturing and TestingThe contract requires the manufacture, testing, and delivery of a branched radio frequency cable assembly that must fully comply with military specifications, including stringent requirements for packaging under MIL-STD-129 and proper labeling of hazardous materials in accordance with DFARS. The work involves precise engineering and quality control to ensure the cable assembly meets performance standards for military applications, with all documentation and physical markings adhering to federal defense regulations. The project is scoped as a subcontract under the NAICS code 334310, which pertains to communications equipment manufacturing, and is managed by the ASC Commodities Division of the Department of Defense. Performance of the contract is designated for Virginia Beach, Virginia, with a specific delivery address of 23459-3018. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, leaving a narrow seven-day window for potential vendors to submit proposals. All deliverables must be packaged, labeled, and documented according to the outlined military and defense regulations to ensure compliance and avoid rejection. The contract is part of a broader effort by the Department of Defense to source reliable, standardized RF components for mission-critical systems, and bidders must demonstrate proven capability in producing high-integrity cable assemblies under strict defense quality protocols.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334310
New
DIBBS
Manufacturing and Delivery of Cable Assembly (NSN 6150-01-387-4754)The contract requires the full production and delivery of a military-spec cable assembly identified by NSN 6150-01-387-4754, adhering to all applicable technical specifications and quality standards mandated for defense applications. The deliverable must be completed and furnished by November 17, 2026, with strict compliance expected throughout manufacturing, testing, and shipment phases to ensure operational readiness and interoperability within U.S. military systems. The work is structured as a subcontract under the Department of Defense, with the Defense Logistics Agency as the overseeing entity, and falls under NAICS code 334310, indicating classification within electronic component and product manufacturing. The performance location and point of contact details are not specified, but the contract is administered through the DIBBS system with the unique identifier SPE4A626P5046, and was posted on July 20, 2026. There is no set-aside designation applied, meaning the subcontract is open to any qualified contractor regardless of size or certification status. All work must satisfy the stringent requirements of military-grade cable assemblies, including environmental durability, electrical performance, and documentation traceability, to meet the Department of Defense’s readiness and logistics standards.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

N/A
View Details
NAICS: 334310
New
DIBBS
First Article Test (FAT) for Cable AssemblyThe contract requires the conduct of First Article Testing (FAT) on a cable assembly identified by NSN 6150-01-387-4754 to verify that the initial production sample meets all applicable military technical specifications. This testing is a mandatory step to ensure the product's design, materials, and manufacturing processes are fully compliant before full-scale production proceeds. The work falls under NAICS code 334310, indicating it involves the manufacturing of electronic components and assemblies, and is structured as a subcontract within the broader Defense Logistics Agency procurement framework under the Department of Defense. The testing must validate every critical characteristic and performance requirement as defined by military standards to guarantee reliability and interoperability in defense applications. The solicitation was posted on July 20, 2026, and the performance location is not specified, suggesting flexibility in where the testing is conducted as long as the final deliverable meets all technical and compliance criteria.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

N/A
View Details
NAICS: 334310
New
DIBBS
Commercial Fire Detector Sensing Element SupplyThe contract involves the supply of 12 commercial off-the-shelf fire detector sensing elements identified by NSN 6340006282661, which must meet the original manufacturer’s specifications to ensure compatibility and performance. These components will be delivered FOB origin to Kidde Technologies, Inc. located in Wilson, North Carolina, meaning the buyer assumes responsibility for shipping and associated costs once the goods leave the supplier’s facility. The procurement is categorized as a subcontract under NAICS code 334310, indicating it relates to the manufacturing of search, detection, navigation, guidance, aeronautical, and naval systems. The contract was posted on July 20, 2026, and is managed by the Defense Logistics Agency under the Department of Defense, reflecting its alignment with defense-related supply chain requirements. No set-aside provisions or specific point of contact details are provided, and the place of performance is not further defined beyond the delivery destination.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

N/A
View Details
NAICS: 334310
New
DIBBS
Supply of Headsets and Microphones (Commercial-Off-The-Shelf)The contract pertains to the supply of commercial-off-the-shelf headset-microphone units designated for military aviation and communications applications, identified by specific National Stock Numbers. These units are intended for use by U.S. military personnel in operational environments where reliable audio communication is critical, and the equipment must meet established performance and durability standards without requiring custom development. The procurement is administered by the Defense Logistics Agency under the Department of Defense, with the North American Industry Classification System code 334310 indicating it falls under telecommunications equipment manufacturing. Although the solicitation number and point of contact are not provided, the contract is structured as a subcontract, suggesting it is part of a larger acquisition framework managed by a prime contractor or existing program. The place of performance and organizational details are unspecified, but the equipment will be distributed to defense operations where these headsets are essential for mission-critical communication. The contract was posted on July 20, 2026, and the associated award and delivery details are accessible through the DIBBS system, indicating active management by the Defense Logistics Agency to ensure timely delivery and compliance with military specifications.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

N/A
View Details
NAICS: 334310
New
DIBBS
Supply of Solid-State Relay (NSN: 5945004027738)The contract entails the supply of 16 commercial off-the-shelf solid-state relays identified by NSN 5945004027738 for use in defense systems. These components must be delivered in fully compliant, properly packaged, and correctly labeled military-grade condition with no requirement for integration, installation, or additional assembly. The procurement is classified under NAICS code 334310 and issued as a subcontract under the auspices of the Defense Logistics Agency, a component of the Department of Defense. The solicitation was posted on July 20, 2026, and the items are to be delivered to an unspecified location within the United States, with all requirements focused solely on meeting military specifications for the relays without ancillary services.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
WAWF Invoicing and Payment Processing ServicesThe contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow system in strict adherence to DFARS 252.232-7006, utilizing either the Invoice 2in1 format or the standard electronic formats prescribed by the Department of Defense. All submissions must be accurately structured and timely delivered to ensure compliance and proper payment processing. The work is scoped under a subcontract and is assigned the NAICS code 541512, indicating a focus on computer systems design and related services. Performance is tied to the location of New Cumberland with ZIP code 17070-5002, and the contracting activity falls under the Active Devices Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026, and participation is conducted via the DIBBS portal using the provided solicitation number.
Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging, Marking, and Shipping Compliance ServicesThe contract requires comprehensive packaging, preservation, and marking services fully aligned with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring military-grade compliance for all handled items. Specifically, dry preservation method 10 must be applied to protect equipment from environmental degradation, while unit packaging under Pack Code U ensures items are individually prepared for efficient handling and distribution. All packages must be marked using DoDAAC-based routing protocols to guarantee accurate tracking and delivery through defense logistics networks. The work is tied to a subcontract under the ACTIVE DEVICES DIVISION of the Department of Defense, with performance centered at New Cumberland, Pennsylvania, ZIP 17070-5002. The North American Industry Classification System code 493190 indicates the service falls under Other Support Activities for Transportation, emphasizing logistics and handling specialization rather than manufacturing. Proposals must be submitted by August 4, 2026, with the solicitation open since July 20, 2026, and no set-aside provisions specified for small business or other categories.
Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
Manufacturing of Military-Grade Electrical Connector Body, ReceptacleThe contract requires the manufacture of 18 units of a military-spec electrical connector body, receptacle, identified by Part No. A-A-55463-06 and NSN 5935-01-323-6812, fully compliant with A-A-55463A Revision A, Generation 4, and DLA RA001 specifications. The work must be performed to exacting military standards ensuring reliability and performance under operational conditions, with the finished products destined for use in defense applications. The NAICS code 334417 indicates this falls under the category of Electronic Component and Product Manufacturing, emphasizing precision fabrication and adherence to technical and quality control requirements. The solicitation is classified as a subcontract and was posted on July 20, 2026, with responses due by August 4, 2026. Performance is to occur at the facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is managed by the Active Devices Division under the Department of Defense, which oversees procurement for critical military electronics components. The precise location of performance and the strict compliance requirements indicate that the contractor must have the necessary certifications and capabilities to meet defense-grade production and inspection standards. The contract will be administered through the DLA DIBBS system using the referenced solicitation number SPE7M526Q0741.
Electronic Connector Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting and Accelerated Payments AdministrationThe contract requires comprehensive administration of subcontracting activities designated exclusively for small businesses under a Total Small Business Set-Aside, as defined by FAR 19.5, with the NAICS code 541611 for management consulting services. The performance location is situated in Cherry Point, North Carolina, with all subcontracting obligations governed by the Federal Acquisition Regulation, particularly the requirement to implement accelerated payments as specified in FAR 52.232-40. The contractor must systematically track all small business subcontractors, maintain accurate records, and submit mandatory reports through the Electronic Subcontracting Reporting System to ensure full compliance with federal guidelines. The contract emphasizes strict adherence to payment timelines for small business subcontractors, with the expectation that payments are accelerated in accordance with the specified regulation. The effort is managed under the Department of Defense and administered by the Active Devices Division, with a response deadline of July 31, 2026, following the posting date of July 20, 2026. No solicitation number is listed, reinforcing the focus on the regulatory structure and administrative rigor required to uphold small business participation and payment integrity. The place of performance and the nature of the work indicate a high degree of coordination with government systems and compliance reporting under defense contracting protocols.
Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541511
New
DIBBS
Prohibited Telecommunications Equipment Screening and ReplacementThis contract requires the identification and replacement of prohibited telecommunications equipment sourced from vendors such as Huawei and ZTE across IT assets, in full compliance with DFARS 252.204-7018. The work involves conducting thorough audits to detect any covered telecommunications equipment or services that are deemed a security risk, followed by the timely removal and substitution with approved alternatives to ensure system integrity and regulatory adherence. The project must be executed within the designated place of performance at Cherry Point, North Carolina, with strict attention to timelines and audit accuracy to meet federal defense specifications. The opportunity is structured as a small business set-aside under the SBA’s Total Small Business Set-Aside category, exclusively available to small businesses as defined by FAR 19.5, and is classified under NAICS code 541511 for computer systems design services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and is issued under the Department of Defense through the Active Devices Division. Contractors must be prepared to deliver compliant solutions under subcontract terms and demonstrate established processes for equipment verification, documentation, and secure logistics during the replacement phase.
Custom Computer Programming Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC ImplementationThis contract requires the implementation of NIST SP 800-171 cybersecurity controls to achieve compliance with CMMC Level 2 standards, focused on system hardening, robust access controls, and comprehensive audit logging across all relevant systems and environments. The effort is scoped to ensure the contractor meets the Department of Defense’s cybersecurity requirements for handling controlled unclassified information, with the ultimate goal of passing a formal CMMC Level 2 assessment. Work must be performed at Cherry Point, North Carolina, with all security measures aligned to federal guidelines and tailored to the specific infrastructure and operational context of the Active Devices Division. The contract is structured as a small business set-aside under SBA requirements, exclusively available to businesses classified as total small businesses as defined by FAR 19.5, and falls under NAICS code 541512 for computer systems design services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and all proposals must demonstrate clear expertise in NIST framework application, CMMC readiness, and defense contracting compliance. The successful vendor will be responsible for documenting control implementation, maintaining audit trails, and providing evidence of continuous compliance, all in support of securing sensitive defense-related systems at the specified location.
Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and Safety ComplianceThe contract requires the provision of hazard warning labels and safety data sheets that fully comply with OSHA’s Hazard Communication Standard and DFARS clause 252.223-7001, ensuring proper identification and communication of chemical hazards across military supply chains. All labeling must adhere to MIL-STD-129 specifications for uniformity and durability, and the vendor must implement a robust system for managing and maintaining up-to-date safety data sheets for all hazardous materials. This subcontract is set aside entirely for small businesses as defined by the SBA and is categorized under NAICS code 541690 for other scientific and technical consulting services. The performance location is designated as Cherry Point, North Carolina, with a response deadline of July 31, 2026, and the solicitation is issued by the Department of Defense’s Active Devices Division through the DIBBS platform.
Other Scientific and Technical Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight & Logistics (U.S.-Flag Vessel Requirement)The contract requires the transportation of goods via U.S.-flag vessels for overseas shipments, with a clear mandate to use American-owned and operated vessels for international freight. For domestic logistics, the contractor must coordinate the movement of cargo to DLA Distribution in Columbus, Ohio, ensuring timely and secure delivery to the specified zip code 43213. The scope encompasses end-to-end logistics planning and execution, including handling, scheduling, and compliance with U.S. maritime regulations for overseas segments. All work must align with the North American Industry Classification System code 484220, which pertains to general freight trucking, and is structured as a subcontract under the Department of Defense’s Active Devices Division. Responses are due by July 31, 2026, following a posting date of July 20, 2026, and the solicitation is accessible through the DIBBS platform for potential bidders.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Compliance & Cybersecurity SupportThe contract seeks advisory or audit support to ensure adherence to critical cybersecurity standards including DFARS 252.204-7012, NIST SP 800-171, and CMMC Level 2 requirements. The primary focus is on facilitating a thorough self-assessment process and generating comprehensive documentation to demonstrate compliance with these defense-related cybersecurity frameworks. This support is essential for organizations handling controlled unclassified information and must be delivered with precision to meet federal contractual obligations. The work is classified as a subcontract under NAICS code 541611, with performance centered in Columbus, Ohio, 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under the purview of the Department of Defense’s Active Devices Division. No specific set-aside type is indicated, and the contract aims to secure expert services that will directly contribute to the contractor’s ability to validate and maintain cybersecurity compliance in alignment with Department of Defense mandates.
Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326199
New
DIBBS
ESD/EMI Protective Packaging SupplyThe contract calls for the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet the stringent requirements of MIL-PRF-81705, specifically including Type I and Type III barrier materials. All materials must be sourced exclusively from manufacturers listed on the Qualified Products List QPL-81705 to ensure compliance with military-grade standards for ESD and EMI protection. The packaging is intended for use in sensitive electronic applications where environmental and static control are critical to mission success. This subcontract is issued by the Active Devices Division under the Department of Defense, with performance required at a location in Columbus, Ohio with the zip code 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. The North American Industry Classification System code 326199 indicates the focus is on other rubber product manufacturing, aligning with the specialized nature of the protective packaging materials. There is no set-aside designation specified, and all qualified vendors meeting the technical and sourcing requirements are eligible to respond.
All Other Plastics Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Supply of Linear Microcircuit (NSN: 5962011999837)The contract calls for the procurement and delivery of twenty units of a linear microcircuit identified by National Stock Number 5962011999837, which must fully comply with applicable military specifications. Each unit requires proper packaging and labeling to meet defense logistics standards, ensuring traceability and readiness for military use. The finished product must be shipped to DLA Distribution in Columbus, Ohio, with the delivery address designated by the zip code 43213. This is a subcontract under the Department of Defense’s Active Devices Division, classified under NAICS code 334418 for other semiconductor and related device manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, leaving a narrow window for qualification and proposal submission. While no set-aside designation or point of contact details are provided, the requirement is specific, time-sensitive, and aligned with defense supply chain protocols, emphasizing strict adherence to technical and logistical directives for military-grade electronics.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
Inspection and Quality Assurance Services (MIL-STD-1916 Compliance)The contract requires the execution of final inspection services for capacitors under strict quality standards, specifically employing MIL-STD-1916 or ASQ H1331 sampling plans to ensure zero non-conformances and full compliance with accepted quality levels for critical, major, and minor defects. The work must be performed to exacting military and industry benchmarks, emphasizing the absolute absence of defects in every inspected unit, making precision and rigorous quality control paramount. The inspection process is non-negotiable in its requirements, leaving no room for tolerance in adherence to the specified standards. The contract is a subcontract under the Department of Defense’s Active Devices Division, with performance expected at a designated location in New Cumberland, Pennsylvania, ZIP code 17070-5002. Issued under NAICS code 541330 for Engineering Services, the opportunity is open for response until July 31, 2026, with posting dated July 20, 2026. All submissions must meet the demanding compliance criteria without deviation, and bidders must be fully prepared to deliver flawless inspection outcomes aligned with defense-quality expectations.
Engineering Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details