Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Award Notice opportunity from Department Of Defense was posted on February 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

HOSE ASSEMBLY

Awarded
SPMYM126Q4016Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7LX-27-U-1452
Solicitation SPE7LX-27-U-1452 is an indefinite-quantity contract issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of nonmetallic hose assemblies, identified by NSN 4720015138773 and Oshkosh Defense LLC part number 3369860. The contract specifies an estimated quantity of 18 units with a delivery requirement of 81 days after order. The maximum order limitation for a single item is set at 350,000.00 USD, and the government maintains a minimum delivery order quantity of 9 units. Inspection and acceptance are both designated at the destination, with shipping terms established as FOB Destination Other. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 for general packaging and MIL-STD-129 for marking and labeling, while ensuring that DLA Master List of Technical and Quality Requirements take precedence. Palletization must follow RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The contract also incorporates various FAR and DFARS clauses, including mandates for cybersecurity safeguarding under NIST SP 800-171, hazardous material identification, and compliance with domestic material restrictions such as the Berry Amendment and Buy American Act.
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days

AI Contract Overview

Show more

Solicitation SPMYM126Q4016 is a firm fixed price award notice issued by DLA Maritime - Norfolk for the procurement of ten 50-foot layflat water discharge hose assemblies. These assemblies must feature a 6 inch nominal inner diameter, a 200 psi working pressure rating, and a multi-layer construction consisting of an SBR/EPDM rubber inner tube, at least four high-tensile tire cord plies, and an EPDM rubber outer cover. Each unit must include a male heavy camlock fitting and be capable of operating in temperatures ranging from -40 to 180 degrees Fahrenheit. The contract is a total small business set-aside under NAICS code 326220. The contract stipulates a delivery period of 14 weeks from the date of award, with shipping terms set as FOB Destination to the Norfolk Naval Shipyard in Portsmouth, Virginia. Packaging must adhere to ASTM D-3951, and any shipments exceeding 40 lbs must be palletized. Quality assurance requires that assemblies withstand 30 minutes of testing with zero leaks, weeps, or bulges. Award selection is based on the Lowest Price-Technically Acceptable (LPTA) methodology, evaluating technical capability on a pass/fail basis before considering price and past performance. Invoicing is mandated through the Wide Area WorkFlow (WAWF) system.

General Info

Contract Value

$29,550

NAICS

326220 - Rubber and Plastics Hoses and Belting Manufacturing

Place of Performance

VA, 23709, USA

Set-Aside

SBA

Award Issued Date

Documents

2
PDF, High priority: read this first2 pages · amendment
High
PDF, High priority: read this first54 pages · rfq
High

Read all 2 documents

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Supply of Nonmetallic Special Shaped Section Seals (NSN 5330-01-622-2472)Open now, due in 13 days
  • O-Ring Set Supplier (NSN 5331-01-714-7124)Open now, due in 15 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseAwarded
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Awarded

Contract was awarded

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Norfolk
Contacts1 person available
OfficePORTSMOUTH, VA, 23709-5000, USA
Office AddressPORTSMOUTH, VA, 23709-5000, USA

Full Description

Show more

The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract with Lowest Price Technically Acceptable (LPTA) Evaluation Factors for the item listed below. The required item is for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice.


The Contract Line Items (CLINs) are as follows:


0001    6” HOSE ASSEMBLY, “LAYFLAT” WATER DISCHARGE HOSE     QTY: 10      U/I:AY



  • 6” I.D. NOMINAL X 6-1/2” O.D.
  • 2.50 LB MAXIMUM PER FOOT WEIGHT (WITHOUT END FITTINGS)
  • 200 LBS WORKING PRESSURE
  • SHALL HAVE A TEMPERATURE RATING OF -40 DEGREES (F) TO 180 DEGREES (F)
  • SHALL BE ABRASION, OXIDATION, AND MOISTURE RESISTANT
  • SHALL BE SUPPLIED IN 50 FOOT LENGTH (+/- 12”)
  • SHALL HAVE A SBR/EPDM RUBBER INNER TUBE
  • SHALL HAVE A HIGH TENSILE TIRE CORD PLIES (MINIMUM OF FOUR (4) FOR REINFORCEMENT.
  • SHALL HAVE AN EPDM RUBBER OUTER COVER
  • EACH HOSE ASSY MUST HAVE A MALE HEAVY CAMLOCK WITH A HOSE SHANK (EQUAL OR EQUIVALENT TO PT COUPLING P/N 60EHD (ITEM NUMBER 1200560H) ON ONE END AND A FEMALE HEAVY DUTY CAMLOCK WITH A HOSE SHANK (EQUAL OR EQUIVALENT TO PT COUPLING P/N 60CHD (ITEM NUMBER 1200360H) ON THE OTHER END. FITTINGS MUST BE RED BRASS ALLOY C84400 OR EQUIVALENT.

NOTE: EACH COUPLING SHALL BE PERMANENTLY/MECHANICALLY ATTACHED BY EXTERNAL CRIMPING, UTILIZING A STAINLESS STEEL CRIMP FERRULE IN ACCORDANCE WITH COUPLING MANUFACTURER’S RECOMMENDATION.


  • EACH ASSEMBLY SHALL HAVE A CAM AND GROOVE CAP AND PLUG INSTALLED FOR CLEANLINESS.

NOTE: MATERIAL FOR CAP AND PLUG TO BE OTHER THAN STEEL OR ALUMINUM. PLASTIC CAP ARE ACCEPTABLE.


  • EACH HOSE ASSEMBLY SHALL HAVE, AT A MINIMUM, THE MFG’S NAME, CONTRACT NUMBER AND PRESSURE RATING ON LAYLINE IN PERMANENT INK OR MOLDED INTO COVERING.
  • SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND FITTING) HAVE BEEN HYDROSTATICALLY TESTED AT 225 PSIG WITH CLEAN, FRESH WATER FOR 30 MINUTES WITH ZERO LEAKS, WEEPS, END FITTING SLIPPAGE AND/OR BULGES.
  • A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING 276, AND A COPY IS TO BE SENT TO CODE 532 TO BE FILED WITH CONTRACT.
  • HOSE SHALL BE TEXCEL-FLO 4HD OR EQUIVALENT.
  • AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS DURING EVALUATION PROCESS.
  • HOSE MUST BE PALLETIZED
  • CODE 269 SHALL REVIEW OFFEROR’S SPECIFICAITON PRIOR TO AWARD.
  • NSN  4720-LL-L24-0014
  • Shelf-Life - UU


The requirement will be solicited as a total small business set aside; The NAICS code applicable to this procurement is 326220, Rubber and Plastics Hoses and Belting Manufacturing with a size standard of 800 employees. The Product Service Code is 4720.


The anticipated delivery date for this acquisition is 14 weeks after contract award. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only. THE SOLICITATION IS NOT YET AVAILABLE.


The solicitation number is SPMYM126Q4016 and it is expected to be available on or about     20 January 2026 and posted to SAM.gov, https://sam.gov/ Quotes will be due by 3:00 PM EST on 23 January 2026. Responses to the solicitation notice shall be emailed to the attention of Monica Richardson as Sign up to see this detail  Please make sure that the solicitation number (SPMYM126Q4016) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues.


Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. Prospective Offeror's should also register on the interested vendor list under SPMYM126Q4016. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed.


All responsible sources may submit a proposal which may be considered by the Government. By submitting a quote, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling Sign up to see this detail, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates and procedures. Please direct all questions regarding this requirement to Monica Richardson at Sign up to see this detail.

More opportunities from Department Of Defense → DLA Maritime - Norfolk

Same awarding agency

NAICS: 333991
New
Federal
PPG-SEMCO Application Guns, Accessories, and Repair Kit -Brand Name Only
Solicitation # SPMYM127Q4011
Solicitation SPMYM127Q4011 is a Firm-Fixed-Price purchase order issued by DLA Maritime Norfolk for the acquisition of new, genuine PPG-SEMCO brand-name application guns, accessories, and repair kits for the Norfolk Naval Shipyard. This requirement is a 100% Small Business Set-Aside and strictly prohibits the use of alternate brands, refurbished, or remanufactured products. The scope includes seven specific CLINs, featuring 20.0oz and 12.0oz retainer sealant tools with handles, Hansen hose assemblies, gun end B-nut assemblies, metal swivel assemblies, valve body assemblies, and sealant gun repair kits. Award will be granted to the responsible quoter who provides the lowest total evaluated price for all seven CLINs and is determined to be technically acceptable. Technical acceptability requires confirmation that all items are new, genuine PPG-SEMCO products, with provided documentation establishing OEM traceability, such as a certificate of conformance or an authorized distributor letter. Delivery is required by April 30, 2027, on an FOB Destination basis to the Norfolk Naval Shipyard in Portsmouth, Virginia. All shipments exceeding 40 lbs must be palletized, and delivery drivers must present two forms of identification, including a REAL ID-compliant license. Payment will be processed via Wide Area Workflow (WAWF).
Power-Driven Handtool Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332912
New
Federal
PIPE FITTINGS - FITTING ASSY
Solicitation # SPMYM127Q0003
The Defense Logistics Agency Maritime Norfolk is soliciting a Firm Fixed Price, single award contract for new marine pipe fittings and components to support the Norfolk Naval Shipyard. This total small business set-aside procurement, under NAICS 332912, utilizes Simplified Acquisition Procedures for commercial items. The requirement consists of nine contract line items, including fitting assemblies, 3 inch dog legs, and 3 inch internal support coils. All items must be new, with a strict prohibition on grey market, refurbished, or used materials. Technical specifications require fitting assemblies to be made of bronze and support coils to be made of Monel to ensure durability in corrosive seawater environments, with all components compatible with MIL-H-24135/4-48 hoses. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) method, evaluating technical capability, delivery, and price reasonableness. Offerors must submit a detailed unpriced capabilities statement and a separate pricing breakdown. The anticipated delivery date is 14 days after receipt of order, with shipping terms as FOB Destination. Invoicing and payment must be processed electronically through the Wide Area Workflow (WAWF) system. Following amendment P0002, the response deadline has been extended to 2:00 PM EST on November 19, 2026.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS