Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOSE ASSEMBLY

Active
SPEFA5-26-T-0980Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a hose assembly identified by NSN 1560-LL-NCB-5943 and part number M83796/1-J-150A, with a quantity of three units to be delivered within fifteen days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards unless otherwise specified. The product must be marked in accordance with MIL-STD-130N and packaged per ASTM D3951, with labeling and unit packaging strictly aligned with MIL-STD-129 and DLA Packaging Requirements. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample lot unless otherwise directed, and critical attributes are subject to the strictest verification levels. The hose assembly is designated as a critical application item with no shelf life requirement and must be delivered FOB destination, with inspection and acceptance occurring at the delivery point. Packaging must be palletized per DLA guidelines, and each unit must be labeled with the correct Unit of Issue and Quantity per Unit Pack as specified. Delivery is due by October 3, 2026, with the final destination being the Fleet Readiness Center at Cherry Point, North Carolina, and shipments must comply with all federal shipping and marking specifications.

General Info

Three hose assemblies delivered FOB destination by October 3, 2026, per MIL-STD and DLA requirements.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

PSC 8021, CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(1)

RFQ SPEFA5-26-T-0980 DLA Aviation Cherry Point

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA FLEET READINESS CENTER DLA PSC
View Agency Profile
Office AddressUS
Contacts
Larry Kemp
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOSE ASSEMBLY
HOSE ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
MIL-STD-130N(1) DATED 16 NOV 2012.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
BELL TEXTRON INC 97499 P/N M83796/1-J-150A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017764447 0001 EA 3.000
SPEFA5-26-T-0980
SECTION B
PR: 7017764447 PRLI: 0001 CONT’D
NSN/MATERIAL:1560LLNCB5943
DELIVERY (IN DAYS):0015
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
PSC 8021
CHERRY POINT NC 28533-0021
US
FREIGHT SHIPPING ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
BEACHEY ROAD, BUILDING 148, BAY C
CHERRY POINT NC 28533-5040
US
Need Ship Date:00/00/0000 Original Required Delivery Date:10/03/2026
SPEFA5-26-T-0980 NSN/Part Number: 1560-LL-NCB-5943 Quantity: 3 EA Purchase Request: 7017764447QTY: 3 Delivery: 15 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
ANGLE
Solicitation # SPEFA3-26-T-0338
This contract, issued under solicitation SPEFA3-26-T-0338 by the Defense Logistics Agency Fleet Readiness Center Southeast, calls for the delivery of three units of part number 70201-22109-120 with NSN 1560-LN-003-4876, to be delivered FOB destination within 84 days of the contract award, with a required delivery date of August 5, 2026. The quantity is fixed with no variance allowed, and inspection and acceptance occur at the delivery destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and palletization following DLA’s Packaging Requirements for Procurement, and any conflicting requirements from the DLA Master List of Technical and Quality Requirements supersede those of ASTM standards. Unit of Issue is each, and the contract specifies that Item Unique Identification is not required per the Service customer’s request. Sampling shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined unless specified otherwise. Deliveries must be sent to the specified freight and parcel post addresses in Jacksonville, Florida, and the contract is subject to the DLA Master List revisions effective on the solicitation issue date. The contract value is based on a unit price of $3.00 per unit for a total of $9.00.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
WASHER, AIRCRAFT, MAT
Solicitation # SPE4A6-26-T-09ZZ
The contract requires the delivery of 84 aircraft mat washers identified by NSN 5310015622686 under solicitation SPE4A6-26-T-09ZZ, with a 98-day delivery window and FOB origin terms, meaning title and risk transfer to the government upon shipment from the contractor’s facility. The product must conform to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowed unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to MIL-STD-2073-1E using packaging code U, with unit containers as boxes and intermediate containers as envelopes, while marking must comply with MIL-STD-129, including barcoding and no special marking codes. The contractor is prohibited from using mercury or mercury-containing compounds in preservation, packaging, packing, or marking unless functional use in batteries, instruments, sensors, controls, weapon systems, or fluorescent lamps is involved, in which case items must be shock-proof and contain a secondary containment boundary per NAVSEA 5100-003D. All hazardous materials must be labeled and documented according to 29 CFR 1910.1200 and DFARS 252.223-7001, with Safety Data Sheets required to be submitted prior to award. The contract mandates use of U.S.-flag vessels for sea transportation unless a formal waiver is granted 45 days in advance, and this requirement flows down to subcontracts above the simplified acquisition threshold. Inspections and acceptance occur at the destination, managed by the government under FAR 52.246-2, and all payment requests must be submitted through Wide Area WorkFlow (WAWF). The solicitation incorporates multiple Federal Acquisition Regulation clauses including cybersecurity safeguards, whistleblower protections, mercury restrictions, hexavalent chromium prohibitions, export controls, and subcontracting obligations, with deviations applied to certain clauses for updated compliance standards. The contract does not specify unit pricing nor total value, and award is not explicitly based on a Lowest Price Technically Acceptable or best value trade-off evaluation. Offers must be submitted via
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 488190
New
DIBBS
FLEX DUCT ASSEMBLY
Solicitation # SPEFA5-26-T-0976
The contract pertains to the procurement of a Flex Duct Assembly, identified by part number 126657-914 and NSN 2835-LL-NC0-4571, with a quantity of 25 units to be delivered FOB destination within 132 days from the order placement. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards unless explicitly overridden by contract specifications. Verification and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is to be packaged in accordance with ASTM D3951 but must fully comply with the more stringent DLA packaging requirements, including MIL-STD-129 labeling and RP001 palletization standards. Identification marking must adhere to MIL-STD-130N dated November 16, 2012, and the product has no shelf life restriction. The contract is issued under solicitation SPEFA5-26-T-0976 as a Total Small Business Set-Aside under NAICS code 488190, with a fixed unit price of $25 per unit and a total contract value of $625. Delivery is to be made to the Fleet Readiness Center DLA in Cherry Point, North Carolina, with inspection and acceptance occurring at the destination. The original required delivery date is August 4, 2026, and all packaging and marking must reflect the specified unit of issue and quantity per unit pack as outlined in the purchase order.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
ANGLE FAIRING
Solicitation # SPEFA3-26-T-0341
The contract pertains to the procurement of one Angle Fairing, identified by NSN 1650-LN-003-5729 and SIKORSKY AIRCRAFT CORPORATION part number 71309-23008-123, under solicitation SPEFA3-26-T-0341. The item is required in a quantity of one unit to be delivered within five days to the Fleet Readiness Center Southeast in Jacksonville, Florida, with delivery terms set at FOB destination and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA Packaging Requirements, and the use of parcel post is explicitly prohibited. All technical and quality requirements referenced through the DLA Master List take precedence over general standards, and sampling procedures must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stipulated. Attributes on drawings are to be verified at specified levels, and unspecified characteristics are treated as major. The item has no shelf life requirement, and Item Unique Identification is not mandated per DFARS 252.211-7003(c)(1)(i). The contract specifies a fixed quantity with no variance allowed, and the required delivery date is August 7, 2026, with the original solicitation posted on August 5, 2026, and responses due by August 13, 2026. The unit of issue is each, and pricing is listed at one unit with a total price of one. Shipping instructions direct use of the fastest traceable means, with both parcel post and freight addresses provided for delivery coordination. For government use, additional identifiers including IPD, DIC, DIST, ADV, and FC codes are included for logistics tracking. All provisions are governed by DLA’s authorized acquisition framework and technical standards, with the purchasing point of contact being James Green at the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
FILLER CIM,
Solicitation # SPEFA3-26-T-0339
This contract, issued by the DLA Fleet Readiness Center Southeast under solicitation SPEFA3-26-T-0339, specifies the procurement of 16 units of filler component NSN 1680-LN-003-5337 with part number DA538L0897-247, for delivery to Jacksonville, Florida. Delivery is required within 84 days of contract award, with FOB destination terms, zero variance in quantity, and inspection and acceptance occurring upon arrival at the delivery point. The item has no shelf life requirement and does not require Unique Item Identification under DFARS 252.211-7003(c)(1)(i). Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements RP001, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise stipulated, and attribute levels are defined per specified verification levels or AQLs. The unit of issue is each, priced at $16.00 per unit for a total of $256.00. Shipping instructions distinguish between parcel post and freight addresses, both directing delivery to the Naval Air Station in Jacksonville, with an original required delivery date of August 5, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
STUD, CONTINUOUS THREAD
Solicitation # SPE4A6-26-T-13QN
This contract is for the procurement of 511 units of a STUD, CONTINUOUS THREAD, identified by NSN 5307-01-626-3664 and part number NAS1454C6-0913, manufactured in compliance with the current revision of the non-government standard NAS1454 Revision 5 dated 06/30/2014. All hardware must meet the specified technical and quality requirements referenced through DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are classified with corresponding verification levels or AQLs. The item must be packaged according to MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking required, and palletization must adhere to DLA packaging requirements. Delivery is FOB origin with a required delivery date of July 28, 2026, and a lead time of 83 days, with no variance permitted in quantity. Inspection and acceptance occur at destination, and shipment must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania, in accordance with DLA transportation procedures. The solicitation number is SPE4A6-26-T-13QN, with a response deadline of August 13, 2026, and the point of contact is Duane Watkins of the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
TRIGGER GUARD MACHING
Solicitation # SPEFA3-26-T-0340
The contract pertains to the procurement of three Trigger Guard Machining units with NSN 1095-LN-002-0479 and part number 69566-3, supplied by ADAMS RITE AEROSPACE, INC, under solicitation SPEFA3-26-T-0340. The requirement is for delivery FOB destination within 216 days, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. Packaging must comply with ASTM D3951, but is superseded by DLA’s Master List of Technical and Quality Requirements, and all packaging and labeling must adhere to MIL-STD-129. Unit of issue is each, with a total price of $3.00 per unit. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Item Unique Identification is not required per customer request. The material has no shelf life restriction. Delivery is to be made to the Fleet Readiness Center Southeast in Jacksonville, Florida, with freight shipped to DLA Distribution Jacksonville at the same address. The original required delivery date is August 5, 2026, and the solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026. The contract is issued under DLA’s authorized unit of issue framework and is governed by the Department of Defense’s acquisition regulations.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
ELBOW, TUBE TO HOSE
Solicitation # SPEFA5-26-T-0978
The contract is for two units of an elbow fitting designated part number 8891-8D, which connects tube to hose and is identified by NSN 4730-LN-003-5506. The supplier, Eaton Aeroquip LLC, must deliver the items FOB destination within five days of order placement, with no tolerance for quantity variance. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other specifications. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA’s packaging standards. No shelf life applies to this item. Delivery is required to the Fleet Readiness Center East at Cherry Point, North Carolina, and shipment must occur via the fastest traceable means—parcel post is prohibited. The contract references solicitation SPEFA5-26-T-0978, with a required delivery date of August 7, 2026, and a unit price of $2.00 per piece for a total value of $4.00. Government-use identifiers and contact information, including point of contact Larry Kemp, are provided for administrative purposes.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
CAP R/H
Solicitation # SPEFA5-26-T-0979
This contract pertains to the procurement of three units of item NSN 1560-LL-NC0-8715 with part number 212-030-241-16 manufactured by Bell Textron Inc, designated as a critical application item with no shelf life requirement. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards, and include compliance with MIL-STD-130N for identification marking of U.S. military property. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes not explicitly defined are treated as major with corresponding verification levels or AQLs. Packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA requirements, and all units must be marked and labeled in accordance with MIL-STD-129, palletized per RP001, and shipped as a single unit of issue. Delivery is FOB destination with a strict 43-day lead time from the contract award, and final inspection and acceptance occur at the destination site with no tolerance for quantity variance. The shipping address is Building 148, Bay C, Beachey Road, Cherry Point NC 28533-5040, while the parcel post address is PSC 8021, Cherry Point NC 28533-0021. The original required delivery date is October 20, 2026, and the contract unit price is $3.00 per unit for a total value of $9.00. The solicitation number is SPEFA5-26-T-0979, issued by the DLA Fleet Readiness Center with primary point of contact Larry Kemp, and the North American Industry Classification System code is 488190. Compliance with DoD unit of issue standards and accurate labeling per the provided DLA guidelines are mandatory for contract fulfillment.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
FILAMENT, ADDITIVE MANU
Solicitation # SPE8E5-26-T-3834
This contract is for the procurement of 46 units of filament for additive manufacturing printers, identified by NSN 9330-01-696-2752 and part number 355-23101 from Stratasys Inc, under solicitation SPE8E5-26-T-3834. The requirement is a total small business set-aside with a delivery deadline of 167 days from the award date, with a mandatory ship date of February 1, 2027, and an original required delivery date of November 24, 2026. The material must be delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically TQ requirement IP025, and if not hazardous, must meet ASTM D3951 standards—however, DLA requirements supersede ASTM. All packaging and labeling must conform to MIL-STD-129, and palletization must follow DLA Packaging Requirements RP001. The shipment is to be sent to the DLA Distribution Depot in Tinker AFB, Oklahoma, with transportation instructions governed by DLAD Proc Notes C19 and C20. The unit price is $46.00 per unit, with a total contract value of $2,116.00, and the unit of issue is each (EA).
DEPOT OKLAHOMA

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
STAIN STEEL 17-4PH CRS
Solicitation # SPEFA5-26-T-0977
The contract specifies the procurement of 1 foot of 17-4PH stainless steel in cold rolled, condition A condition, with dimensions of 0.100 inch thick by 36 inches wide by 120 inches long, manufactured in strict compliance with AMS5604 Revision J. The material must be accompanied by a Certificate of Quality Conformance and packed in a manner that prevents damage during transit, adhering to DLA packaging standards, including MIL-STD-129 for labeling and ASTM D3951 for general packaging, with DLA Master List requirements taking precedence. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero defects required unless otherwise defined, and attributes must be verified per specified levels. Physical identification and metallurgical certification are mandatory, with CDRL-METALSCERT required and referenced in the Technical Data Package under QAP 13873. The material has no shelf life, and delivery is FOB destination within five days of contract award, with no tolerance for underdelivery but up to ten percent overdelivery permitted. Inspection and acceptance occur at the destination, and shipment must be sent via traceable freight only, not parcel post, to the Fleet Readiness Center East in Cherry Point, NC. The procurement is identified by NSN 9515-LN-003-1701 and purchase request 7017745743, with an original required delivery date of August 7, 2026, and a designated contract officer contact at DLA.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
PIN-RIVET
Solicitation # SPEFA3-26-T-0337
This contract solicits a single critical application item, a PIN-RIVET with NSN 5320-LN-003-4897 and part number HLT109AP6-7 from HI-SHEAR CORPORATION 73197, under solicitation SPEFA3-26-T-0337, issued by the Defense Logistics Agency for delivery to the Fleet Readiness Center Southeast in Jacksonville, Florida. The item is required in a quantity of one unit with a delivery deadline of five days after award, FOB destination, and inspection and acceptance will occur at the delivery point. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA Packaging Requirements RP001, while all DLA Master List of Technical and Quality Requirements take precedence over any general standards. The contract mandates stringent quality controls, including compliance with SAE AS9003 or ISO 9001 tailored to AS9003, and sampling methods aligned with MIL-STD-1916 or ASQ H1331, Table 1, requiring zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The PIN-RIVET is subject to all relevant FAR and DFARS clauses, including safeguarding covered defense information, NIST SP 800-171 compliance under a specific deviation, prohibition of hexavalent chromium, Buy American Act and Berry Amendment thresholds reduced to $150,000, and cybersecurity reporting obligations. The contract is a small business set-aside, incorporates electronic submission via DIBBS with quotes due by August 13, 2026, and requires mandatory Safety Data Sheet submission prior to award; failure to provide it renders the offeror nonresponsible. Payment must be processed through WAWF with an invoice and receiving report required for fixed-price line items, and the vendor cannot use parcel post for shipment, instead shipping by the fastest traceable means. All representations and certifications must be maintained in the System for Award Management, and the contractor must affirm compliance with prohibitions on covered telecommunications equipment and controlled exports.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

NAICS: 332999
New
DIBBS
Manufacture and Supply of CAP R/H (Right-Hand Cap)The contract calls for the manufacture, quality assurance, packaging, and delivery of three right-hand caps designated by NSN 1560LLNC08715, specifically designed for military use and fully compliant with DLA technical standards and MIL-STD-130N(1) marking requirements. Each unit must meet stringent durability, dimensional, and performance specifications to ensure operational readiness and uniformity within defense logistics systems. The work requires rigorous quality controls throughout production, including inspection protocols and documentation to verify adherence to all military standards. Performance of the contract is centered at Cherry Point, North Carolina, with an anticipated delivery timeline tied to the submission deadline of August 13, 2026. The solicitation, issued under the NAICS code 332999 for other fabricated metal product manufacturing, is structured as a subcontract award managed by the Department of Defense through the DLA Fleet Readiness Center DLA PSC. All deliverables must be properly labeled and packaged per federal defense guidelines to enable seamless integration into supply chains and inventory systems. The award will be processed through the DIBBS portal, and successful vendors must demonstrate proven capability in producing defense-grade components with full traceability and compliance.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
Supply of Hose Assembly (NSN: 1560LLNCB5943)The contract requires the manufacture and delivery of three units of a specific hose assembly identified by NSN 1560LLNCB5943, with strict adherence to technical and quality standards set by the Defense Logistics Agency. All assemblies must comply with OSHA hazardous materials labeling requirements to ensure safe handling and transport. The work is to be performed under a subcontract arrangement, with the place of performance located in Cherry Point, North Carolina, at the DLA Fleet Readiness Center. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, leaving a narrow window for proposals. The NAICS code 332994 indicates the work falls under other fabricated metal product manufacturing, emphasizing precision fabrication and compliance with military specifications. Although no set-aside type is specified, the contract is managed by the Department of Defense through its logistics branch, underscoring its critical nature for defense readiness.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488310
New
DIBBS
Sea Transportation of Supplies (International Delivery)
Port and Harbor Operations

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Management
Environmental Consulting Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Labeling Services
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 339920
New
DIBBS
Precision Component Manufacturing & Supply
Sporting and Athletic Goods Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
CUSHION
Solicitation # SPEFA5-26-T-0975
The contract specifies the procurement of 25 units of a cushion identified by NSN 5330-LN-002-7833 and part number SPD65E-1701-055, with a total contract value of $25.00 per unit delivered FOB destination within 48 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and must follow DLA Packaging Requirements for Procurement (RP001) and be palletized accordingly, while the material itself has no shelf life restriction. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical attributes must be verified at Level VII or AQL 0.1, major at Level IV or AQL 1.0, and minor at Level II or AQL 4.0. Inspection and acceptance occur at the destination, with no允许 variance in quantity. Delivery must be sent to the specified freight address at Cherry Point, North Carolina, with a required delivery date of August 4, 2026, and must be prepared for shipment in accordance with the defined unit of issue and packaging protocols.
Other Support Activities for Air Transportation

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
CAP
Solicitation # SPEFA5-26-T-0956
This contract, issued under solicitation number SPEFA5-26-T-0956 by the Defense Logistics Agency Fleet Readiness Center, is a simplified acquisition for a single unit of a military component identified by NSN 1560LLNC08714 and part number 205-030-724-047 from Bell Textron Inc. Delivery is required within 50 days, with an original delivery date of October 29, 2026, and is FOB destination with zero tolerance for quantity variance. The Government will inspect and accept the item at the destination address in Cherry Point, North Carolina, using the freight shipping address provided. All packaging must comply with ASTM D3951, but the DLA Master List of Technical and Quality Requirements takes precedence, and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Marking and labeling must follow MIL-STD-129 for shipment and storage, and unique identification of the item must comply with MIL-STD-130N(1) as mandated for U.S. military property. The material has no shelf life requirement. Quality assurance sampling must follow MIL-STD-1916 or ASQ Z1331, Table 1, or an equivalent zero-based sampling plan, with attributes classified as critical, major, or minor assigned AQLs of 0.1, 1.0, and 4.0 respectively, and corresponding verification levels of VII, IV, and II; unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise specified. The contract is anticipated to be awarded as a firm-fixed-price contract under an automated process, likely using a Lowest Price Technically Acceptable methodology. Multiple FAR and DFARS clauses are incorporated, including inspection requirements under 52.246-2, cybersecurity safeguards under 252.204-7012, prohibitions on covered telecommunications equipment under 252.204-7018, trafficking in persons compliance under 52.222-50, and hazardous material handling restrictions under 252.223-7006. Payment must be submitted via WAWF, and compliance with employment eligibility verification, equal opportunity, and
Other Support Activities for Air Transportation

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 488510
New
DIBBS
Hazardous Material Handling and Transportation SupportThe contract requires comprehensive support for hazardous material handling, packaging, and transportation in strict alignment with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and applicable Department of Transportation regulations. Central to this effort is the provision of Safety Data Sheet documentation to ensure all hazardous materials are properly identified, labeled, and managed throughout the supply chain. The contractor must ensure full compliance with regulatory frameworks governing the safe transport and storage of dangerous goods, including accurate labeling, documentation, and procedural adherence to mitigate risks during handling and transit. Performance of this subcontract is mandated at Cherry Point, North Carolina with a zip code of 28533-0021, and falls under NAICS code 488510, indicating specialized support activities for transportation. The opportunity was posted on August 3, 2026, with responses due by August 11, 2026, and is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC. This subcontract does not specify a set-aside classification, and the point of contact information is not provided, requiring proposers to engage directly through the DIBBS portal using the provided link to access full solicitation details.
Freight Transportation Arrangement

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 541330
New
DIBBS
Third-Party Quality Assurance and Inspection ServicesThe contract requires third-party quality assurance and inspection services to independently verify the conformance of manufactured parts against MIL-STD-1916 sampling plans and the specific requirements outlined in RQ017. This includes rigorous testing of critical attributes at an Acceptable Quality Level of 0.1, ensuring that even minimal defects are detected and documented. All instances of nonconformance must be formally reported with full traceability and documentation to support compliance and corrective actions. The work is scoped under a subcontract arrangement for the Department of Defense, specifically for the DLA Fleet Readiness Center DLA PSC, with performance expected at Cherry Point, North Carolina, ZIP 28533-0021. Interested parties must submit responses by August 11, 2026, following the solicitation issued under the NAICS code 541330 for engineering services.
Engineering Services

POSTED

3 days ago

DEADLINE

in 5 days
View Details