Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOSE ASSEMBLY, NONME

Active
SPE7M4-26-T-328SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a nonmetallic hose assembly identified by NSN 4720-01-482-7562, with a requirement for eight units to be delivered within 101 days to the designated receiving warehouse in Tracy, California. The product must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, specifically incorporating technical identifiers R and I, and adhere strictly to DLA packaging guidelines as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking and packaging. The hose assembly is governed by SAE AS117K and SAE AS1339K standards and is listed on a Qualified Products List or Qualified Manufacturers List, requiring sourcing only from qualified suppliers. Use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the referenced specifications. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans with zero non-conformances required unless otherwise stated, and attributes are evaluated using defined verification levels or AQLs. The item is designated as a critical application component, and delivery is FOB origin with no variance allowed in quantity. The contract mandates adherence to DLA freight and transportation procedures, with a firm delivery deadline of April 23, 2027, though an earlier ship date of December 1, 2026, is requested. No shelf life restrictions apply to this material.

General Info

Eight NSN 4720-01-482-7562 hoses, compliant with SAE and DLA standards, deliverable to Tracy, CA by April 23, 2027.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

326220 - Rubber and Plastics Hoses and Belting ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-328S for DLA Land and Maritime Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOSE ASSEMBLY,NONME
HOSE ASSEMBLY,NONMETALLIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
,,
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SPE7M4-26-T-328S
SECTION B
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AS117K REVISION NR K DTD 05/01/2021 PART PIECE NUMBER: AS117-16H0306
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AS1339K REVISION NR K DTD 05/01/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017047392 0001 EA 8.000
NSN/MATERIAL:4720014827562
DELIVERY (IN DAYS):0101
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE7M4-26-T-328S
SECTION B
PR: 7017047392 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:12/01/2026 Original Required Delivery Date:04/23/2027
SPE7M4-26-T-328S NSN/Part Number: 4720-01-482-7562 Quantity: 8 EA Purchase Request: 7017047392QTY: 8 Delivery: 101 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326220
New
DIBBS
HOSE ASSEMBLY SET, N
Solicitation # SPE7M0-26-T-036E
The contract pertains to the procurement of one hose assembly set, identified by NSN 4720015795653 and part number 2464432, with a unit price of $1.00 and a total value of $1.00, requiring delivery within five days of order issuance. All items must be shipped FOB origin with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but any conflicting requirements in the DLA Master List of Technical and Quality Requirements take precedence. Labels and markings must follow MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging standards. The item must be shipped via traceable freight methods, excluding parcel post, to the designated delivery point at Fort Knox, Kentucky. The shipment must be identified with the military freight designation W90N15 and the military freight control number W90N1562160026, with project code TP1 and supplier addendum W809JG. The required delivery date is August 7, 2026, and the solicitation was issued under contract number SPE7M0-26-T-036E, with response deadline August 21, 2026. The contracting office is the Department of Defense, Maritime Supply Chain ESOC Buys, and the point of contact is Abaigael Masterson.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M0-26-T-036B
This contract is for the procurement of two hose assemblies, nonmetallic, identified by NSN 4720-01-580-2654 and part number 1677640 from Caterpillar Inc, under solicitation SPE7M0-26-T-036B. The total quantity is two units, each to be delivered FOB origin within five days of award, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 as supplemented by the DLA Master List of Technical and Quality Requirements, which takes precedence. Packaging and labeling must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. The unit of issue is each, and the required delivery date is August 7, 2026. Delivery is to be made to Fort Buchanan, Puerto Rico, with a designated shipping address and mark-for point under the DLA Logistics Command. Transportation instructions reference DLAD Proc Notes C19 and C20, and the shipment requires a RDD/NMCS protocol. The contract specifies that government identification must be removed from non-accepted supplies, and all documentation aligns with DLA’s authorized unit of issue guidelines. The primary point of contact is Abaigael Masterson, and the solicitation response deadline is August 21, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
BELT, V
Solicitation # SPE7L3-26-T-170Q
The contract is for one V-belt with NSN 3030-01-303-1267 and part number 25-060620, sourced under solicitation SPE7L3-26-T-170Q, with a required delivery date of August 7, 2026, and a 20-day delivery window from the award date. The item must be supplied by one of three approved vendors: NAPA Automotive Parts Co, Contitech USA Inc, or Carlisle Power Transmission, each with specified part numbers. The unit of issue is each (EA), with no quantity variance permitted, and delivery is FOB origin. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking required. The item must be shipped using traceable freight methods, not parcel post, to the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia, with the freight address and point of contact details provided. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, applicable based on acquisition type and applicable revision dates. Packaging includes a BV unit container, E5 intermediate container, and preservative method 33 with clean/dry conditions. The contract specifies a purchase request number, project code ZH9 TP 2, and government-only identifiers for tracking and logistics. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, under NAICS code 326220, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office, with Lee Miller listed as the primary point of contact. All terms are binding under DLA procurement policies and require strict adherence to standards outlined in referenced military specifications.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7L5-26-T-4925
The contract specifies the procurement of nonmetallic tubing with NSN 4720016477148 and part number 4100367, quantity of 25 units, at a unit price of $25.00, for a total price of $625.00. Deliveries are required FOB origin with a delivery window of 201 days from the contract award, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, but DLA Master List technical and quality requirements take precedence over ASTM standards. Palletization must adhere to DLA Packaging Requirements for Procurement RP001, and packaging must reflect the specified Unit of Issue and Quantity per Unit Pack as outlined in the contract. The delivery destination is DLA Distribution San Joaquin in Tracy, California, with the same address used for freight shipping. The original required delivery date is March 3, 2027, with a need ship date of August 18, 2026. Transportation logistics follow DLAD Proc Notes C19 and C20. The solicitation number is SPE7L5-26-T-4925, issued on August 10, 2026, with a response deadline of August 21, 2026, under NAICS code 326220. The primary point of contact is Bradley Evans, with contact details provided. The order is subject to DLA's standardized acquisition protocols including the use of authorized units of issue and the referenced DLA Master List of Technical and Quality Requirements.
LAND SUPPLIER OPNS ENGINES

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-329B
This contract specifies the procurement of nonmetallic hoses with a 7-inch inner diameter and 35-foot length, manufactured to meet MIL-DTL-22240G specifications for petroleum-based fuels and water services, discharge only, with smooth bore and lightweight buoyant characteristics. The hoses are classified as a critical application item with a Type I shelf life of 120 months, which is non-extendable, and require clear shelf-life markings including both the cured date and expiration date per MIL-STD-129R. Residual lengths are unacceptable, and the entire quantity of 87 units must be delivered as complete, undamaged, and fully compliant units. Packaging must conform to MIL-STD-2073-1E with special marking code 32, palletization following DLA packaging requirements, and all items must be marked in accordance with MIL-STD-129. The contract mandates government source inspection with a first article test requirement, and failure to meet this test may result in inspection at destination instead. The hose must be free from ozone-depleting chemicals and mercury or mercury-containing compounds unless specifically exempted, such as in functional batteries, fluorescent lamps, or sensor controls, with portable mercury-containing items requiring a secondary containment boundary. All items must be produced under full and open competition, subject to a total small business set-aside, and conform to technical and quality requirements referenced in the DLA Master List. Two delivery lines are identified: one for 87 units to be shipped to San Diego by January 30, 2029, and another for 88 units to be shipped to New Cumberland by July 17, 2028, both with FOB origin terms and zero quantity variance allowed. An additional line item for a single first article test unit is included, with no separate charge assumed unless otherwise cited. Delivery is due within 815 days of award, and all components must be supplied with a certificate of conformance unless overridden by a quality assurance letter of instruction.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M4-26-T-329A
This contract specifies the procurement of an air duct hose with a NSN of 4720016504958 and a separate first article test line item identified by NSN 0001S00000053. The air duct hose must comply with technical and quality requirements referenced from the DLA Master List, including MIL-PRF-32107/3 and QAP 16236, and must meet stringent packaging standards per MIL-STD-2073-1E and MIL-STD-129, including mandatory shelf-life markings that display both the cure date and expiration date. The item is classified as a Type I (Code S) with a non-extendable shelf life of 60 months, and the use of Class I ozone-depleting chemicals is strictly prohibited. Government source inspection with a first article test is required, and the contractor must submit one unit for testing as specified in FAR clause 52.209-3. A copy of the first article test report must be sent to the DLA Maritime FAT Monitor at the designated Columbus, OH address. The contract calls for delivery of 16 units FOB origin with zero variance allowed, inspection and acceptance occurring at destination, and a delivery window of 254 days from the contract award, with a required ship date of February 2, 2027. Packaging must adhere to DLA packaging requirements, include specific marking code 32 for shelf life, and be palletized accordingly, with all parcels addressed to the DLA Distribution facility in New Cumberland, PA. The first article test line item is listed with a quantity of one and no separate charge assumed unless explicitly cited; if the test is waived, no award will be made for this line. The solicitation was issued under SPE7M4-26-T-329A with a response deadline in August 2026, and performance is tied to Federal Acquisition Regulation and Department of Defense procurement directives.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M0-26-T-036S
The contract is for two nonmetallic hoses with NSN 4720-01-607-1258 under solicitation SPE7M0-26-T-036S, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The unit of issue is each, with a total quantity of two units at a unit price of $2.00, totaling $4.00. Delivery is required within five days of contract award to the destination FPO AE 09627-0001, with FOB destination terms, zero variance allowed in quantity, and inspection and acceptance occurring upon arrival. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all technical and quality specifications referenced by R or I numbers in the DLA Master List take precedence over ASTM standards. The required delivery date is July 24, 2026, and the item is designated for shipment to the U.S. Naval Air Station Sigonella in Italy, with detailed logistics instructions provided for parcel post and freight delivery, including transport notes C19 and C20. All items must be marked and labeled per government specifications, and removal of government identification is prohibited from non-accepted supplies. The point of contact for this solicitation is Abaigael Masterson, with a response deadline of August 21, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
COUPLING HALF, QUICK DI
Solicitation # SPE7M0-26-T-035Q
The contract pertains to the procurement of four units of a Coupling Half, Quick Disconnect with NSN 4730-01-130-1894 and part numbers 1001J12A and V1001J012A00, sourced from SAFRAN ELECTRONICS & DEFENSE and AIRLINX AIRCRAFT SERVICES INC. Delivery is required within five days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must be packaged per ASTM D3951 in compliance with MIL-STD-129 marking and labeling, with DLA Master List of Technical and Quality Requirements overriding any conflicting standards. The unit of issue is each, priced at $4.00 per unit, totaling $16.00 for the order. Shipments must avoid parcel post and be sent via the fastest traceable means to the designated freight address in New Orleans, Louisiana, under RDD 777 and project code 880 TP 1. The required delivery date is August 7, 2026, with the solicitation issued under SPE7M0-26-T-035Q, classified under NAICS 326220. The contracting activity falls under the Department of Defense, Maritime Supply Chain ESOC Buys, and packaging must adhere to DLA’s RP001 packaging requirements including palletization specifications. Government-specific identifiers and tracking data, including DIC, ADV, and FC codes, are specified for internal use only.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M0-26-T-036C
This contract is for a single nonmetallic hose assembly with NSN 4720-01-580-4667 and part number 1677642, procured under solicitation SPE7M0-26-T-036C. The item must comply with stringent technical and quality standards dictated by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers embedded in the document. It is subject to a 120-month non-extendable shelf life measured from the cure date of the rubber or elastomer components, with mandatory shelf-life markings including both cure and expiration dates applied per MIL-STD-129 on all packaging levels. Ozone-depleting chemicals are strictly prohibited in the product or manufacturing process, and any substitute materials require formal approval unless explicitly authorized by the specification. Packaging must conform to MIL-STD-2073-1E and DLA Packaging Requirements, using Pack Code U with unit and intermediate containers designated as D3, and all labeling must follow MIL-STD-129 including the special marking code ZZ for unique requirements. The item must be delivered within five days of contract award, FOB origin, with no quantity variance allowed, and inspected and accepted at the destination. The delivery point is Fort Buchanan, Puerto Rico, with specific shipping and marking instructions tied to DLA procedural notes C19 and C20. The contract includes a single unit requirement, with the original required delivery date set for August 7, 2026, and is governed by Federal acquisition rules under the Department of Defense, with point of contact and additional administrative details provided for procurement coordination.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
Federal
HOSE, NONMETALLIC
Solicitation # SPMYM226Q7929
This solicitation seeks quotes for NONMETALLIC HOSE under solicitation number SPMYM226Q7929, issued by the Department of Defense through DLA Maritime - Puget Sound in Bremerton, WA, and is exclusively set aside for SBA Certified Women-Owned Small Businesses under the WOSB Sole Source Program. All submissions must be made electronically via SAM.gov, and contractors must ensure their responses are complete and signed, including detailed information such as contractor name, CAGE code, point of contact, quotation details, manufacturer information with country of origin, lead time, and delivery date, all FOB Destination Bremerton, WA. Compliance with specific sections of the solicitation form is required, including certifications under 52.204-24 and 52.209-11, and signatures on designated boxes, with the completed solicitation returned via email to karl.lindley@dla.mil by Sunday, 28 September 2025 at 7 AM. Contractors must ensure they have a current NIST SP 800-171 security assessment, unless the product qualifies as Commercial Off The Shelf (COTS), in which case they must explicitly identify it and provide supporting documentation during bidding. The solicitation is open for responses through SAM.gov and the deadline for submission is 2026-08-11 at 7:00 PM. The NAICS code associated with this procurement is 326220, indicating the item falls under plastic packaging and containers manufacturing. Only responses that are fully completed, signed, and submitted via the specified email will be considered responsive. All relevant details, including place of performance and point of contact, are centered on the DLA Maritime office in Bremerton, Washington.
DLA Maritime - Puget Sound

POSTED

about 7 hours ago

DEADLINE

in about 24 hours
View Details
NAICS: 326220
New
DIBBS
Rubber Seals and Gaskets SupplyThe contract is for the supply of nonmetallic special-shaped rubber sections intended for defense or industrial applications, requiring full manufacturing capabilities along with proper packaging and FOB Origin shipping in strict compliance with military specifications. The components, described as rubber seals and gaskets, must be produced to exacting standards to ensure performance in demanding operational environments. The work is subcontracted under NAICS code 326220, which classifies rubber product manufacturing, and is managed by the Department of Defense through its DDSP New Cumberland Facility, with performance required at the 17070-5002 location in New Cumberland. All deliveries must meet defined military criteria and be shipped from the manufacturer’s facility, placing responsibility for logistics and quality control squarely on the contractor. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is part of a broader procurement effort to support critical defense and industrial infrastructure needs.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
Nonmetallic Hose Assembly Manufacturing & SupplyThe contract is for the manufacture and delivery of nonmetallic hose assemblies that comply with military specifications, including all associated labeling, packaging, and certification requirements. The products must be delivered to New Cumberland, Pennsylvania, with the NAICS code 326220 indicating the scope aligns with rubber product manufacturing. The work is being procured as a subcontract under the Department of Defense’s Fluid Handling Division, with a response deadline of August 20, 2026, and the solicitation was posted on August 9, 2026. Compliance with all applicable military standards for performance, durability, and documentation is required, and the supplier is responsible for ensuring the assembled products meet the necessary quality and traceability provisions for military use. Deliveries must be coordinated to arrive at the specified location with full certification and proper packaging to meet defense logistics requirements.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332919
New
DIBBS
SEAL, CONICAL, FLARED TU
Solicitation # SPE7M3-26-T-8152
This contract specifies the procurement of conical flared tube seals, identified by part number AS4824A16 and NSN 4730-01-538-3942, manufactured in accordance with SAE AS4824B (R2015) Revision B dated 11/01/2007. Each package contains two seals and is designated as one package (1 PG = 2 EA), with a total quantity of 453 packages required. The item is classified as a critical application and must not contain any ozone-depleting chemicals; substitutes require prior approval unless explicitly authorized by the specification. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific instructions to keep seals enclosed in protective plastic vials during shipping to prevent damage. Marking must follow standard government protocols, with no additional special coding required. The contract mandates delivery within 88 days from the requirement date, with FOB origin terms, inspection and acceptance occurring at origin, and no variance allowed in quantity. The delivery address is DLA Distribution in Corpus Christi, Texas, with a need ship date of August 6, 2026, and an original required delivery date of March 12, 2027. The contract is subject to full and open competition, and the Certificate of Conformance procedure is authorized unless overridden by a quality assurance instruction. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision levels determined by the solicitation or award date. Transportation and shipping logistics must adhere to DLA Procurement Notes C19 and C20, and all unit of issue data aligns with DoD and ANSI X12 standards.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
ORIFICE PLATE ASSEMBLY
Solicitation # SPE7M4-26-T-328Q
The contract specifies the procurement of an orifice plate assembly with part number 5712-2PC and NSN 4820-00-911-1545, for a quantity of 157 units, under solicitation SPE7M4-26-T-328Q. Delivery is required within 164 days, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging materials, and the U pack code. The item is classified as a critical application item with a non-extendable shelf life of 120 months and is subject to DLA’s packaging and quality requirements as defined in their master list of technical and quality standards. Mercury and mercury-containing compounds are strictly prohibited unless part of approved functional components like batteries or sensors, and portable devices containing mercury must have a secondary containment as per NAVSEA 5100-003D. A Certificate of Quality Compliance is mandatory, and removal of government identification from non-accepted supplies is required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is February 2, 2027, with an original delivery due date of December 17, 2026. Unit of issue is each, priced at $157.00 per unit, totaling $24,649.00.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M4-26-T-328T
The contract is for the procurement of a fluid filter element with the NSN 2940-00-741-1081 and part numbers specific to approved vendors including Wheeler Fleet Solutions, Met-Pro Corporation, and Haldex Brake Products Corporation. A total quantity of 234 units is required, each unit priced at $234.00, resulting in a total contract value of $54,756. Delivery is mandated within 24 days from the order placement, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The filter element is designated as a critical application item, and strict compliance is required with DLA packaging standards, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking codes applicable. Packaging must adhere to DLA’s RP001 requirements and be palletized accordingly. Mercury or mercury-containing compounds are prohibited in or in direct contact with the filter element except under specific exceptions for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or Navsea-specified reagents, with portable devices containing mercury required to be shockproof and have a secondary containment boundary consistent with NAVSEA 5100-003D. All supplies must be delivered to the DLA Distribution Depot Hill in Hill AFB, Utah, and transportation logistics are governed by DLAD procedural notes C19 and C20. The solicitation number is SPE7M4-26-T-328T, issued under NAICS code 336390 by the Department of Defense’s Fluid Handling Division, with a response deadline of August 21, 2026, and a required ship date of September 15, 2026, despite an original delivery date of February 3, 2027. The contract enforces full alignment with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the applicable revision is controlled by the solicitation issue date.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
SWIVEL JOINT, HYDRAULIC
Solicitation # SPE7M3-26-T-8155
A hydraulic swivel joint made of steel with a zinc plating and dichromate finish, or alternatively a clear trivalent chromate finish, is being procured under a total small business set-aside solicitation. The part features 3/4-16 37-degree SAE flare connections on both ends and measures 3.06 inches overall in length, with a specific part number assigned by Grove U.S. LLC and Oshkosh Defense LLC as approved sources. This is a critical application item requiring government engineering source approval and is subject to stringent technical and quality requirements referenced from the DLA Master List. The item is identified by NSN 4730-01-199-4583 and must be delivered in full compliance with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The contract calls for 303 units to be delivered FOB origin within 163 days, with zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the shipment must be sent to the designated DLA Distribution facility in New Cumberland, Pennsylvania. The delivery is scheduled for February 1, 2027, with an original required delivery date of February 2, 2027, under solicitation SPE7M3-26-T-8155, and the unit price is $303.00 per each, totaling a contract value of $91,809.00.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M3-26-T-8157
The contract is for 280 units of a 3/8 inch quick disconnect coupling half, specified by NSN 4730-01-412-5272 and referenced to a technical drawing titled "COUPLING HALF, QUICK DISCONNECT." All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Export control restrictions apply to technical data associated with this item under either ITAR or EAR, requiring prior authorization from the Department of State or Commerce for any disclosure to foreign persons, including those within the United States. Access to this controlled data is restricted to DLA contractors with active US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and approval from the DLA controlling authority. The solicitation, issued under number SPE7M3-26-T-8157 on August 10, 2026, with a response deadline of August 21, 2026, is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332996. Performance is required at New Cumberland, Pennsylvania, 17070-5002, with a delivery window of 105 days after award. The primary point of contact is William Cain from the Fluid Handling Division, Department of Defense, reachable via email and phone. The procurement is managed through the DLA’s electronic procurement portal, and all contractors must comply with DFARS 252.225-7048 regarding export control of technical data.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
COUPLING, SHAFT, RIGI
Solicitation # SPE7M4-26-T-329C
The contract pertains to the procurement of a rigid shaft coupling, part number 317090, manufactured by Eaton Aerospace LLC with CAGE code 62983, under solicitation SPE7M4-26-T-329C. A total of 30 units are required at a unit price of $30.00, with delivery scheduled for 164 days after award, FOB origin, and acceptance occurring at the destination. The item is classified as a critical application item and must comply with stringent defense procurement standards, including the DLA Master List of Technical and Quality Requirements, which supersede all other specifications. Compliance with MIL-STD-129 for marking and packaging is mandatory, and packaging must align with ASTM D3951 unless overridden by DLA requirements. Palletization must follow RP001 guidelines, and sampling protocols require zero non-conformances under MIL-STD-1916 or equivalent zero-based plans, with verification levels assigned based on attribute criticality. The supplier must hold a CMMC Level 2 self-assessment certification and handle Covered Defense Information as defined by RD002. Delivery is to be made to DLA Distribution Depot Hill at Hill AFB, Utah, with a required ship date of February 2, 2027, and an original delivery deadline of September 12, 2027. No quantity variance is permitted, and all packaging and labeling must strictly adhere to contract-specified unit of issue and quantity per unit pack.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-328Y
The contract specifies the procurement of seamless metallic tubing made from corrosion-resistant steel with a composition of 321, featuring an outer diameter of 0.500 inches and a wall thickness of 0.028 inches, delivered in random lengths between 8 and 16 feet. The tubing must comply with the MIL-T-8606C(2) specification and meet the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including the applicable QAP 13873. The item is classified as a commercial item and a critical application item, requiring full and open competition. All materials must adhere to strict manufacturing and inspection standards, including compliance with MIL-STD-1916 or ASQ Z1.331 for sampling, with zero non-conformances required unless otherwise specified, and must be verified through a Certificate of Quality Compliance as mandated by contract clause 52.246-9000. Metal certification documentation is required and must be submitted as per CDRL-METALSCERT. Packaging and delivery must follow MIL-STD-2073-1E and RP001 DLA Packaging Requirements, with preservation performed in accordance with MIL-S-163 using Type B or C preservatives as applicable. Each master lift is limited to 2000 pounds gross weight, and packaging must not include Class I ozone-depleting chemicals. Marking is required per MIL-STD-129 with no special marking codes. The delivery point is FOB origin with inspection and acceptance also occurring at origin, and the quantity of 1,207 linear feet may vary by plus or minus 10%. The required delivery date is January 12, 2027, with a need ship date of February 2, 2027, and full delivery must be completed within 164 days. The item is identified by NSN 4710-00-540-6722 and purchase request 7017779049, with final delivery directed to DLA Distribution at Robins Air Force Base, Georgia. All documentation and compliance are subject to the latest revisions of referenced standards effective on the solicitation or award date, as applicable.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7M4-26-T-328R
The contract is for the procurement of 2,405 units of a grooved pulley identified by NSN 3020002771123 and part number MS20220-2, designated as a critical application item and classified as a commercial item. The product must comply with stringent technical and quality requirements outlined in MIL-DTL-7034/2B and MIL-DTL-7034F(2), with adherence to TDP Revision B General 2 and reference drawing 200415485. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards unless explicitly overridden by the contract. Sampling and inspection are strictly controlled under MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are assigned predefined verification levels or AQLs. The item is subject to qualification under the Qualified Products List or Qualified Manufacturers List and must be packaged and labeled in compliance with MIL-STD-129 and ASTM D3951, with palletization meeting DLA Packaging Requirements. Delivery is FOB origin with a 164-day lead time and must arrive by February 2, 2027, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the contract is awarded under a HUBZone Set-Aside with a primary point of contact at the Department of Defense’s Fluid Handling Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-328M
The contract specifies the procurement of a synthetic rubber gasket with an outside diameter of 5.063 inches, an inside diameter of 1.875 inches, and a thickness of 0.125 inches, classified as a critical item requiring source inspection and compliance with stringent technical and quality standards. The item is defined by a military or consensus non-government standard, and all units manufactured after the solicitation date must conform to the current revision of that standard, with past revisions accepted only for previously manufactured hardware. The gasket must be free of asbestos as defined in Fed-Std-313 and must not contain intentional mercury or mercury compounds except in specific exempted applications such as batteries or instrument sensors, with additional containment requirements for portable devices. It carries a non-extendable 36-month shelf life under Type I Code Q requirements, and each unit must be permanently marked every three feet with the specification number, revision, type, class, and cure or manufacture date in accordance with MIL-STD-190, including approved colors and environmental resistance. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1 to protect against UV degradation. Palletization follows DLA packaging requirements, and all markings must include the special code 32 indicating Type I shelf life. The item is subject to inspection and acceptance at destination, with a delivery window of 87 days from the contract award and a required delivery date of December 31, 2026. The contractor must certify material compliance, understand bare item marking requirements, and deliver 215 units FOB origin under a firm fixed price of $215.00 each, totaling $46,225.00. The delivery address is the DLA Distribution New Cumberland Facility, and transportation logistics must adhere to DLAD Procurement Notes C19 and C20. The solicitation number is SPE7M4-26-T-328M, with a response deadline of August 21, 2026, and the item falls under Federal Supply Class 5330 with NSN 5330-01-126-8850.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, QUICK DISCONNE
Solicitation # SPE7M3-26-T-8158
This contract pertains to a commercial quick disconnect plug identified by part number 155-39-12D, manufactured by SATAIR A/S and also available from Eaton Aeroquip LLC and Jaidinger Mfg Co Inc, designed for use on F/A-18 Hornet and S-3A Viking aircraft. The item is constructed from aluminum alloy with an external thread and includes a chain, and it is classified as a critical application item with destination inspection and acceptance points. Packaging must comply with MIL-STD-2073-1E, including heat-sealed barrier bags for cleanliness, and marking must adhere to MIL-STD-129 with special marking code 24 indicating open inspection or use. Packaging is subject to DLA’s Reduced Plastic Packaging Initiative, requiring minimal plastic use without compromising protection. The item is procured under solicitation SPE7M3-26-T-8158, a Women-Owned Small Business Set-Aside, with a required delivery of 312 units within 125 days of award, delivered FOB origin. The NSN is 4730-01-394-3297, and the unit of issue is each. Delivery must be made to DLA Distribution Jacksonville at the specified address, with freight details governed by DLA procedures C19 and C20. The original required delivery date is January 4, 2027, with a need ship date of December 25, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and pricing is set at $312.00 per unit for a total contract value of $97,344.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
RETAINER ASSY
Solicitation # SPE7M4-26-T-329D
The retainer assembly, identified by NSN 5330-00-525-6138 and quantity of 126 units, is solicited under contract SPE7M4-26-T-329D with a response deadline of August 21, 2026, and a required delivery date 95 days after award. This item is classified as a commercial item and strictly prohibits the use of asbestos as defined in FED-STD-313. All technical and quality requirements applicable to this procurement are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Government identification must be removed from non-accepted supplies in accordance with RQ011. The procurement is administered by the Department of Defense’s Fluid Handling Division, with performance located at Tinker AFB, Oklahoma, and primary point of contact Rory O’Reilly at dla.mil. The NAICS code 339991 applies, and the solicitation is issued through the DLA eProcurement portal.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-26-T-8154
The contract is for 147 hundred-unit lots of a spring-type hose clamp, nominal effective size of 1-3/8 inches, identified by NSN 4730-00-585-8582 and part number AA52506-E-22, with full and open competition required. The item must comply with the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and all manufacturing and inspection must follow MIL-STD-1916 or an equivalent zero-based sampling plan with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0. The product must not contain or come into direct contact with mercury or mercury-containing compounds except for specific exemptions such as functional uses in batteries, fluorescent lights, sensors, or instrumentations approved by NAVSEA, and any portable fluorescent lamps or instruments containing mercury must be shock-proof with a secondary containment boundary per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and replacements require prior approval unless explicitly authorized. The clamp must conform to SAE J1508-2009 and the DLA-approved specification revision E dated 03/31/2023, with configuration changes requiring formal engineering change proposals or variance requests. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 with the U pack code and no special marking, and palletization must meet DLA procurement requirements. The unit of issue is an HD of 100 units, with delivery due 101 days after award, FOB origin, inspection and acceptance at destination. The full shipment must be delivered to the DDSP New Cumberland Facility in Pennsylvania with a required ship date of December 1, 2026, and an original delivery deadline of December 12, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details