Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOSE ASSEMBLY, NONME

Active
SPE4A0-26-T-4222Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for a single non-mechanical hose assembly identified by NSN 4720-01-713-7766 and part number AE2464689H0264, sourced from Sikorsky Aircraft Corporation with CAGE code 78286. The item must comply with a comprehensive set of technical, quality, and packaging requirements mandated by the Defense Logistics Agency, including adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Note C03 from August 2016, and while item unique identification is not required, the contractor must follow strict configuration control and variance procedures. The product is classified as a Type I shelf-life item with a fixed 120-month (10-year) expiration date, marked with special code 32, and must meet non-tailored quality requirements based on ISO 9001:2015. All manufacturing and inspection activities must follow approved sampling standards—either MIL-STD-1916 or ASQ H1331—with zero non-conformances allowed in the sample unless otherwise specified. Measuring and test equipment used must be calibrated and verified, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with marking and palletization following DLA-specific guidelines; the item is not to be shipped via parcel post and must be delivered using the fastest traceable means. Delivery is required within five days of award, FOB origin, to a designated receiving location at Naval Air Station Fallon, Nevada, with no tolerance for quantity variance. The contract was issued under solicitation SPE4A0-26-T-4222 and is governed by Federal acquisition rules with full accountability for compliance across technical, quality, cybersecurity, and logistics dimensions.

General Info

Single hose assembly NSN 4720-01-713-7766, 10-year shelf life, DLA quality and packaging rules, CMMC Level 2, delivery in 5 days.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

326220 - Rubber and Plastics Hoses and Belting ManufacturingView NAICS

Place of Performance

NAVAL AIR STATION BLDG 24, FALLON, NV, 89496-0001, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A0-26-T-4222 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOSE ASSEMBLY,NONME
HOSE ASSEMBLY,NONME
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
SIKORSKY CORPORATION, CAGE 78286 ALTERNATE SAMPLING PLAN QAP 1201
PROCEDURE, "ATTRIBUTE SINGLE STATISTICAL ACCEPTANCE SAMPLING" IS
ACCEPTABLE. SIKORSKY CORPORATION'S ALTERNATE PLAN MUST MEET OR EXCEED
THE REQUIREMENTS OF ASQ H1331 OR MIL-STD-1916.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
SPE4A0-26-T-4222
SECTION B
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment SHELF LIFE TYPE I 120MONTHS (10YEARS) CODE W RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item.
SIKORSKY AIRCRAFT CORPORATION 78286 P/N AE2464689H0264
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017746303 0001 EA 1.000
NSN/MATERIAL:4720017137766
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N44317
FRC WEST DET FALLON QA CTPL
4755 PASTURE RD
NAVAL AIR STATION BLDG 24
FALLON NV 89496-0001
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE4A0-26-T-4222
SECTION B
PR: 7017746303 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
N44317
RECEIVING OFFICER/SECTION
4755 PASTURE ROAD BLDG 25
FALLON NV 89496
US
M/F: (TCN) N443175219G204
RDD: 999
PROJ: AK0 TP 1
SUPP ADD: Y SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A4A DIST: 9B ADV: FC: JE
Need Ship Date:00/00/0000 Original Required Delivery Date:08/14/2025
SPE4A0-26-T-4222 NSN/Part Number: 4720-01-713-7766 Quantity: 1 EA Purchase Request: 7017746303QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326220
New
DIBBS
Rubber Seals and Gaskets SupplyThe contract is for the supply of nonmetallic special-shaped rubber sections intended for defense or industrial applications, requiring full manufacturing capabilities along with proper packaging and FOB Origin shipping in strict compliance with military specifications. The components, described as rubber seals and gaskets, must be produced to exacting standards to ensure performance in demanding operational environments. The work is subcontracted under NAICS code 326220, which classifies rubber product manufacturing, and is managed by the Department of Defense through its DDSP New Cumberland Facility, with performance required at the 17070-5002 location in New Cumberland. All deliveries must meet defined military criteria and be shipped from the manufacturer’s facility, placing responsibility for logistics and quality control squarely on the contractor. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is part of a broader procurement effort to support critical defense and industrial infrastructure needs.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
Manufacturing of Special-Shaped Nonmetallic Rubber SectionsThe contract is for the manufacturing of custom nonmetallic rubber components that must comply with military specifications, ensuring strict adherence to performance, durability, and environmental standards required for Department of Defense applications. The work includes full lifecycle compliance such as shelf-life management, specialized packaging, and accurate labeling to meet DOD regulatory requirements. The components are described as special-shaped, indicating unique geometries or tailored designs for specific military systems or equipment use cases. The solicitation is issued under NAICS code 326220 for rubber product manufacturing and is classified as a subcontract opportunity with a response deadline of August 20, 2026. Performance is required at the New Cumberland facility with ZIP code 17070-5002, operated by the DDSP New Cumberland Facility under the Department of Defense. While no specific point of contact or set-aside details are provided, the posting date of August 9, 2026, indicates an upcoming procurement window for qualified vendors capable of fulfilling complex military-grade rubber component requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
Internal Seals and Elastomer Component SupplyThe contract calls for the supply of Buna-N and fluorocarbon rubber seals, including O-rings and gaskets, specifically designed for integration into a pressure regulating valve. All components must strictly comply with the military specifications MIL-P-25732 and MIL-R-83248, ensuring dimensional accuracy, material integrity, and performance under demanding environmental and operational conditions. The seals are critical to maintaining pressure integrity and system reliability within defense applications, requiring adherence to high-standard manufacturing and quality control protocols. This is a total small business set-aside subcontract under the SBA program, assigned the NAICS code 326220 for rubber product manufacturing. The opportunity was posted on August 9, 2026, with responses due by August 20, 2026, and the place of performance is designated as Bremerton, Washington, with a zip code of 98314-6001. The contracting activity is under the U.S. Department of Defense through the Puget Sound office, and the solicitation is accessible via the DIBBS platform for eligible small businesses to submit proposals.
PUGET SOUND

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
O-RING
Solicitation # SPE7L3-26-T-170E
The contract is for the procurement of 884 O-rings, part number 20315AF, supplied by Falls Filtration Technologies Inc. from Stow, Ohio, under the national stock number 5331-01-079-0875. It is designated as a critical application item and classified as a commercial item, subject to strict compliance with DLA packaging and technical requirements. The O-rings must be free of asbestos as defined in FED-STD-313 and must not contain or come into direct contact with mercury or mercury-containing compounds, except for specific exempted functional uses such as in batteries, fluorescent lights, instrumentation, weapon systems, or chemical reagents authorized by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. All items must be packaged in accordance with MIL-STD-2073-1E and sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the item to ultraviolet light exposure. Marking and palletization must follow MIL-STD-129 and DLA packaging standards respectively. Delivery is FOB origin with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. The required delivery date is 54 days from contract award, with a need ship date of June 13, 2026, and an original required delivery date of June 17, 2026. The shipment must be sent to the DLA Distribution Albany facility at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, as specified in the freight shipping and parcel post addresses. The contract is issued under solicitation SPE7L3-26-T-170E, with a unit price of $0.00 per unit and a total contract value determined by the quantity. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, and adherence to the applicable revision of that master document controls compliance, depending on the acquisition size and timeline. The point of contact is Karen McCarley, with procurement handled under NAICS code 326220 by the Department of
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M0-26-T-034L
This contract is for a single unit of a non-metric hose assembly identified by NSN 4720-01-656-3692 and part number F387TCJSJ9060606-225 from Parker-Hannifin Corporation, under solicitation SPE7M0-26-T-034L. The item must be delivered within five days to Hurlbert Field, Florida, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless superseded by DLA’s Master List of Technical and Quality Requirements, which takes precedence. All packaging must be marked and labeled per MIL-STD-129 and palletized according to DLA’s packaging guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Shipping must be done via the fastest traceable means; parcel post is forbidden. The purchase request number is 7017784019, with a required delivery date of August 6, 2026, and the contract is governed by DoD unit of issue standards. Government use identifiers and shipping controls are included for internal tracking, with primary point of contact being Abaigael Masterson at DLA.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-326Y
The contract is for the procurement of two units of hose, air duct with NSN 4720-01-556-7157 and part number MRP12016, supplied by approved vendors including Mack Trucks, Inc., AMZ Alabama Inc., and BAE Systems Tactical Vehicle Systems LP. Delivery is required within 20 days from the order date under FOB origin terms with no tolerance for quantity variance. The items must be packaged and marked in strict accordance with DLA Packaging Requirements and MIL-STD-129, with packaging standards overriding ASTM D3951 where applicable. The products are designated for delivery to the Navy Expeditionary Logistics Support Group at Williamsburg, VA, with a required ship date of August 6, 2026, and must be shipped by the fastest traceable means, explicitly excluding parcel post. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standards. The contract is issued under solicitation SPE7M4-26-T-326Y, with a unit price of $2.00 per unit, totaling a contract value of $4.00, and requires compliance with federal procurement protocols including standardized unit of issue and labeling. Government use codes and shipping identifiers are specified for internal tracking and logistics management.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-327B
The contract specifies the procurement of six nonmetallic hoses identified by NSN 4720-01-581-3730 under solicitation SPE7M4-26-T-327B, with a required delivery within 165 days of award and a delivery point of origin FOB. The item must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence over ASTM standards. Packaging and palletization must comply with DLA’s RP001 requirements, and no variance is permitted in quantity—exactly six units must be delivered. Inspection and acceptance occur at the destination, and the goods must be shipped to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The unit of issue is each, with a total contract value of $6.00 per unit, totaling $36.00. The original required delivery date is March 13, 2027, with a need ship date of February 2, 2027. Transportation requirements are governed by DLAD Proc Notes C19 and C20. The contract incorporates all applicable technical and quality specifications listed in the DLA Master List, and any government identification on non-accepted supplies must be removed per RQ011. The solicitation was posted August 9, 2026, with responses due by August 20, 2026, under NAICS code 326220, and is managed by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M0-26-T-034D
This contract specifies the procurement of a nonmetallic hose assembly with the NSN 4720-01-488-9388 and part number 54001321, supplied by ACS Industries, Inc. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The product is strictly prohibited from containing any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly authorized by the specification. Shelf-life requirements mandate clear marking per MIL-STD-129, including the manufactured, cured, assembled, or packed date alongside the expiration date, given this is a Type I (Code H) item with a non-extendable 12-month shelf life. Packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, with unit packaging using code Q at packing level B, and palletization conforming to RP001; all markings must follow MIL-STD-129, including the special marking code 32 for Type I shelf-life identification. The contract requires delivery of one unit within five days of award, with FOB origin delivery and both inspection and acceptance occurring at the origin. The quantity is fixed with zero variance allowed. The item must be shipped to the Distribution Management Office at Camp Kinser, Okinawa, Japan, via a RDD 999/NMCS shipment with transportation governed by DLAD Proc Note C19 and first destination transfer per C20. It shall be marked for M00172, MWSS 172, with the military freight designation M2022062160034. The required delivery date is August 6, 2026, and the solicitation issued on August 9, 2026, with responses due by August 20, 2026. The item falls under NAICS code 326220 and is procured under the Department of Defense via the Maritime Supply Chain ESOC Buys office, with primary point of contact listed as Abigael Masterson.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
BELT, V
Solicitation # SPE7L5-26-T-4918
The contract pertains to the procurement of a BELT, V with NSN 3030-01-416-1542, requiring a quantity of 29 units at a unit price of $29.00, for a total price of $841.00. The item must be delivered within 135 days from the contract award, FOB origin, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, prioritizing DLA’s Master List of Technical and Quality Requirements, and palletization must adhere to RP001 standards. The part must be marked per MIL-STD-130N and sourced under critical item source inspection requirements. Technical specifications are governed by TDP Rev A Gen 3 referencing drawing number 19207 12375797 with a revision date of June 17, 2026, despite earlier revisions listed. The delivery address is the DLA Distribution facility in New Cumberland, PA, with a required ship date of January 3, 2027. The solicitation number is SPE7L5-26-T-4918, issued under NAICS code 326220, with Randy Ith as the primary point of contact. Unit of issue is each (EA), and all packaging and labeling must align with specified DLA and DoD standards.
LAND SUPPLIER OPNS ENGINES

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-946E
This contract pertains to the procurement of six O-rings identified by NSN 5331-00-469-6840, with a delivery deadline of 165 days after award and a response deadline of August 20, 2026. The solicitation, issued under number SPE7L1-26-T-946E by the Department of Defense’s Land Supply Chain, mandates strict adherence to technical and quality requirements referenced from the DLA Master List, with applicable revisions determined by the solicitation or award date. All items must comply with DLA Packaging Requirements and the Contractor Retention of Supply Chain Traceability Documentation directive from August 2016, requiring the contractor to maintain full traceability records throughout the supply chain. The use of ozone-depleting chemicals is strictly prohibited and supersedes any conflicting specification requirements, and all products must be free of asbestos; any alternatives require formal approval per Clause L30 and Provision 4 Conditions. Documentation for source approval requests and removal of government identification from non-accepted supplies must also be followed. The place of performance is specified as New Cumberland, Pennsylvania, 17070-5002, and primary point of contact is Robert Warne, reachable via email and phone.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-326J
The contract specifies the procurement of 19 units of hose, air duct with NSN 4720-01-429-6846 and part numbers AD778-02A17 and L0C102804006806 from HBD Industries, Inc and Flexfab LLC respectively, under solicitation SPE7M4-26-T-326J. The item is to be delivered FOB origin within 71 days, with no tolerance for quantity variance, and inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and all DLA Master List of Technical and Quality Requirements, which take precedence, and all containers must be marked and labeled per MIL-STD-129 with unit of issue as EA and quantity per unit pack as specified. Palletization must adhere to DLA packaging requirements for procurement. The delivery address is DLA Distribution Depot Hill at Hill AFB, Utah, with transportation requirements governed by DLAD Proc Notes C19 and C20. The original required delivery date is February 2, 2027, though a need ship date is set for August 6, 2026. The contract is issued under DoD authority with NAICS code 326220 and is managed by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, METALLIC
Solicitation # SPE7M4-26-T-326B
The contract is for one metallic hose assembly with NSN 4720015891869 and part number B47860-3, procured under solicitation SPE7M4-26-T-326B by the Department of Defense’s Fluid Handling Division. The item must be delivered in 20 days FOB origin with no variance in quantity, inspected and accepted at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all requirements governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any standard. Palletization and packaging are subject to RP001 DLA Packaging Requirements. The delivery is directed to a U.S. military installation in Kaiserslautern, Germany, identified by the address and SSA code WK4GBW, with shipment logistics referencing DLAD PROC NOTES C19 and C20. The unit of issue is each, priced at $1.00, with a total value of $1.00. All labeling and identification must adhere to government standards, and government identification on non-accepted supplies must be removed. The contract includes specific technical and quality conditions defined by R and I numbers referenced from the DLA Master List, and the original required delivery date is August 5, 2026. The point of contact for the solicitation is Blake Tushar, and the purchase request number is 7017784267.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A0-26-T-4215
The contract is for the procurement of two socket head cap screws with part number 23-10572-275 and NSN 5305-01-336-6837, sourced from Daimler Truck North America LLC in Portland, OR. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA packaging standards, and item identification marking is required under RQ017, though unique identification is waived per the service customer’s request. Sampling follows MIL-STD-1916 or an equivalent zero-based plan, with acceptance strictly requiring zero non-conformances unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. There is no shelf life requirement for the material. Delivery is due within five days of contract award, FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The shipment must be sent via traceable means, excluding parcel post, to the designated delivery point at Fort Bragg, NC, with the freight and mark-for addresses matching. The item must be labeled and documented per the specified requirements, including the contract number SPE4A0-26-T-4215, purchase request 7017722270, and government-specific identifiers. The required delivery date is August 4, 2026, with a solicitation posting date of August 9, 2026, and response deadline of August 17, 2026. The contracting office is under the Department of Defense’s Aviation Supply Chain ESOc Buys, with Danita Davis as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A0-26-T-4211
The contract pertains to SUPPORT, STRUCTURAL items with NSN/Part Number 1560-01-650-4509, for a quantity of four units, under Purchase Request 7017745999, with delivery required within five days after delivery order. The solicitation, numbered SPE4A0-26-T-4211, was posted on August 9, 2026, and responses are due by August 17, 2026. The work is classified under NAICS code 336413 and is managed by the Department of Defense’s Aviation Supply Chain ESOC Buys office, with performance to occur at FPO, ZIP 96632. The contract is subject to stringent export control regulations under ITAR or EAR, meaning technical data associated with the item cannot be disclosed to any foreign person, whether inside or outside the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with valid US/Canada Joint Certification Program certification, completed training on DOD export-controlled data, and approved access via the DLA questionnaire may receive the technical information. The primary point of contact for this solicitation is Danita Davis, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, TAPE
Solicitation # SPE4A0-26-T-4223
The contract is for the procurement of one tapered roller bearing, part number LM603049 902B3, with NSN 3110016496082, supplied by The Timken Corporation. Delivery is required within five days from the origin, FOB origin, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129. Preservation methods are determined by bearing type and closure per detailed specifications in MIL-DTL-197M, including application of protective lubricants and adherence to process controls outlined in paragraphs 3.3.4 through 3.9. Packaging must meet DLA’s RP001 requirements, and all items must be palletized accordingly. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is identified under purchase request 7017719867, and the solicitation number is SPE4A0-26-T-4223, with a response deadline of August 17, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A0-26-T-4225
The contract is for a single plain stud with NSN 5307-01-626-8290, quantity one, under solicitation SPE4A0-26-T-4225, with a response deadline of August 17, 2026, and delivery required within five days of award. The item is issued by the Department of Defense through the Aviation Supply Chain ESOC Buys office, with performance required at Miramar, Florida, 33025-7971. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked per bare item marking requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless the contract specifies otherwise. The point of contact is Danita Davis, reachable via email and phone provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE4A0-26-T-4217
The contract pertains to the procurement of a GEAR CLUSTER item with NSN 3020-00-916-3550 and part number 75331-2, supplied by HONEYWELL INTERNATIONAL INC., under solicitation SPE4A0-26-T-4217. Three units are required at a unit price of $3.00, for a total price of $9.00, with delivery due within five days FOB origin. Inspection and acceptance occur at the origin, and the quantity variance is strictly zero percent, meaning no overruns or underruns are permitted. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific preservation methods, packaging materials, and coding specified, and palletization must adhere to DLA packaging requirements. Marking is to follow standard guidelines without special codes. The item is designated as a critical application item with no shelf life requirement, and item unique identification is not mandated per customer request, with DFARS 252.211-7003(c)(1)(i) applying. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling protocols aligned to MIL-STD-1916 or ASQ H1331 Table 1, or comparable zero-based plans, where critical, major, and minor attributes are assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. Documentation for source approval, cybersecurity compliance at CMMC Level 2, and removal of government identification from non-accepted supplies are required. Delivery is to be shipped to the Tainan Branch Warehouse in Taiwan, with freight details and forwarding instructions governed by DLAD procedural notices. The contract includes specific government-use codes and reference identifiers, and the required delivery date is set for September 11, 2024, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026, under the NAICS code 333613 for mechanical power transmission equipment manufacturing.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE4A0-26-T-4220
The contract specifies the procurement of one unit of a spring tension clip with NSN 5340-01-588-4798 and part number 56-1209 from Goodrich Corporation, under solicitation SPE4A0-26-T-4220. Delivery is required within five days of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, overriding any other standards such as ASTM D3951. Non-hazardous items must be commercially packaged per ASTM D3951, while hazardous items must follow Fed-Std-313 and TQ requirement IP025, with all packaging labeled per MIL-STD-129 and palletized according to RP001. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval. The item must be shipped via traceable means, excluding parcel post, to the designated military destination at Fort Hood, Texas, with a required delivery date of August 4, 2026, and no need ship date provided. The contract incorporates all referenced DLA technical and quality requirements, which take precedence over other specifications, and the unit of issue is each.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE4A0-26-T-4218
This contract pertains to the procurement of a gear cluster identified by part number 75331-2 and NSN 3020-00-916-3550, with a single unit requirement to be delivered within five days from the origin. The item is designated as a critical application item with no shelf life requirement, and item unique identification is not mandated per the service customer’s request, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined, including dry preservation and designated unit and intermediate containers. Palletization follows DLA packaging standards and no special marking is required. Inspection and acceptance occur at origin, with zero nonconformances required in sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise defined, and unspecified attributes are treated as major. The contract includes cybersecurity compliance obligations under CMMC Level 2 self-assessment and covered defense information directives. Delivery is to Tainan, Taiwan, via the Parts-Attach General Depot, with freight forwarding managed under DLA procedural notes. The contract is issued under solicitation SPE4A0-26-T-4218, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Aviation Supply Chain ESOc Buys office.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, TAPERED
Solicitation # SPE4A0-26-T-4224
The contract is for one tapered bushing with NSN 5365-01-500-5183 and part number 117174, supplied by Reliance Electric Company DBA 71956, under solicitation SPE4A0-26-T-4224. Delivery is required within five days of contract award, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containment, with marking adhering strictly to MIL-STD-129 and no special markings required. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated government delivery address in Jacksonville, Florida, with freight shipping directed to the Distribution Management Office. Quality and verification are governed by technical and quality requirements referenced from the DLA Master List, including sampling protocols based on MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Acceptance requires zero non-conformances unless otherwise specified. Physical identification of the item must meet RQ017 requirements, and all packaging and labeling must align with DLA standards. The unit of issue is each, priced at $1.00, with a total contract value of $1.00. The required delivery date is August 5, 2026, and the item is classified under NAICS code 332510 for federal procurement by the Department of Defense, Aviation Supply Chain ESO Buys.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A0-26-T-4213
The contract is for one machine thread plug, part number 941279 with NSN 5365015772669, supplied by Parker Hannifin Corporation, required to be delivered within five days to Fort Bliss, Texas, under solicitation SPE4A0-26-T-4213. The item must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over all other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with palletization specified under RP001. Inspection and acceptance occur at the destination, with zero non-conformances required under sampling protocols derived from MIL-STD-1916 or ASQ H1331, treating unspecified attributes as major and enforcing strict AQL levels for critical, major, and minor characteristics. The unit of issue is each, with no variance permitted in quantity, and shipment must be transported via traceable, non-parcel post means under a RDD/_NMCS designation with the ship-to, mark-for, and freight address all matching the same Fort Bliss military unit. Delivery is required by July 23, 2026, and all labeling, marking, and identification must follow RQ017 specifications, including removal of government identifiers from non-accepted supplies, while measuring and testing equipment must meet RT001 standards. The contract is under the Department of Defense, administered by the Aviation Supply Chain ESOC, with Danita Davis as the point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A0-26-T-4212
The contract is for the procurement of 3 units of a spacer, sleeve with NSN 5365-01-398-3676 and part number 7993-L-800 from Milwaukee Valve Co., Inc., under solicitation SPE4A0-26-T-4212. Delivery is required within five days of the contract award, with goods to be shipped FOB origin and accepted at the destination. The purchase quantity is fixed with no variance allowed, and inspection and acceptance occur upon arrival at the delivery point. Compliance is mandatory with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The material has no shelf life restriction. The shipment is to be sent using a traceable freight method, excluding parcel post, to the specified delivery address in Augusta, Georgia, with all packaging labeled per the contract’s unit of issue and quantity per unit pack. The required delivery date is July 30, 2026, and the point of contact for inquiries is Danita Davis of the Department of Defense’s Aviation Supply Chain ESOC Buys.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325120
New
DIBBS
CALIBRATING GAS MIXTUR
Solicitation # SPE4A0-26-T-4214
The contract specifies the procurement of a single unit of a 5 ppm nitrogen dioxide (NO2) calibration gas mixture balanced with nitrogen, packaged in a 33 cubic foot cylinder containing 58 liters, under NSN 6830-01-609-2980 and manufacturer part number 600-0055-000 from Honeywell International Inc. The item is classified as a commercial off-the-shelf (COTS) product with a non-extendable shelf life of three months (Type I, Code C), requiring strict adherence to DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129R for marking and labeling. The gas is identified as a hazardous material under UN1956, Hazard Class 2.2, and must be shipped in compliance with applicable hazmat regulations, with cylinders that cannot fit into UN-certified 4G fiberboard boxes required to be palletized as Load Type IX per MIL-STD-147. The item must be shipped FOB destination within five days of award, with zero tolerance for quantity variance, and cannot be delivered via parcel post—only traceable freight methods are permitted. The delivery address is the Naval Medical Readiness and Logistics Command at Cheatham Annex in Williamsburg, Virginia, and inspection and acceptance occur at the destination. The contract mandates that all shipping documentation and hazardous communication comply with OSHA and SDS regulations, requiring prior review and approval of safety data sheets and hazard labels by technical personnel, with copies submitted to the DLA Aviation HMIRS office. Mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional components like sensors or laboratory reagents specified by NAVSEA, and portable fluorescent lamps or instruments containing mercury must include a secondary containment barrier. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively.
Industrial Gas Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
MOUNTING BASE, ELECT
Solicitation # SPE4A0-26-T-4221
This contract specifies the procurement of a Mounting Base, Electrical with NSN 5975-01-160-6275 and part number 2041442-0102, for a single unit to be delivered in five days FOB origin. The item is classified as a Critical Application Item and must be supplied by one of three approved vendors: Honeywell International Inc DBA, Ontic Engineering & Manufacturing Inc, or Super Tek Electronics Inc. Delivery is required to Point Mugu, CA, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA Packaging Requirements. Special markings are not required, and hazardous material packaging guidelines apply. The shipment must be sent via the fastest traceable means, excluding parcel post, and is designated as RDD 999/NMCS. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated, and attributes must be verified at specified levels. The contract incorporates a comprehensive set of technical and quality requirements from the DLA Master List, including cybersecurity compliance at CMMC Level 2, removal of government identification from non-accepted items, and tailored higher-level quality requirements for manufacturers and non-manufacturers. The purchase request number is 7017395882, the contract number is SPE4A0-26-T-4221, with a required delivery date of July 6, 2026, and the point of contact for inquiries is Danita Davis.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details