This Solicitation opportunity from Department Of Defense was posted on July 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HOSE ASSEMBLY, NONME

Closed

SPE7M4-26-T-199UFederal

Submission Closed07/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 313320

New

Federal

47--HOSE ASSEMBLY,NONMEThe contract is for the procurement of 34 units of a nonmetallic hose assembly with NSN 4720015145228, to be delivered to DLA Dist San Joaquin under delivery code W1A8, with a performance deadline of 184 days after award. The approved source for this item is identified as 0EYA6 BMST1037. The solicitation, numbered SPE7M4526T255W, is posted as a request for quote and must be submitted electronically; hard copies are not available. Specifications, plans, or drawings are not provided, and all responsible sources are invited to respond if quotes are received by the deadline. The quote submission window opens on July 12, 2026, and closes on July 23, 2026. The procurement falls under NAICS code 313320 and is managed by the Department of Defense through DLA Land and Maritime, with the contracting office located in Columbus, Ohio. All inquiries must be directed to the designated point of contact via email, as no additional documentation is available beyond what is accessible through the provided SAM.gov link.

DLA Land And Maritime

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETALThis contract specifies the procurement of a nonmetallic hose assembly with the NSN 4720-01-164-5868, identified by part numbers 1C05050GGG0295 from Danfoss Power Solutions II, LLC and 242203-6S25-0295 from Parker Hannifin Corp. The item is classified as a critical application item and requires government engineering source approval. It is subject to strict technical and quality standards incorporated via the DLA Master List of Technical and Quality Requirements, with compliance controls based on the solicitation or award date depending on acquisition size. The assembly must not contain any Class I ozone-depleting chemicals, and any substitute materials must be pre-approved unless explicitly permitted by the specification. Shelf life is fixed at 120 months with no extensions allowed, and all units must be marked with both the cure date and expiration date calculated from the rubber/elastomer cure date, per MIL-STD-129 and special marking code 32. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including palletization and marking in accordance with MIL-STD-130N. The item is restricted source and subject to defense information controls. The contract includes two delivery lines: one for 8 units to be shipped to Albany, Georgia, with a need ship date of October 4, 2027, and another for 96 units to Barstow, California, with a need ship date of July 9, 2026. Both deliveries are FOB origin with zero quantity variance allowed, inspection and acceptance occur at destination, and delivery must be completed within 92 days. All units are to be shipped in single unit packs with no intermediate containers, and the total contract value is based on unit pricing without volume discounts.

FLUID HANDLING DIVISION

POSTED

DEADLINE

BRACKET, TOW HOOKThe contract is for the procurement of 15 BRACKET, TOW HOOK items under solicitation SPE7L4-26-T-5546, with a delivery deadline of 168 days from award. The item is defined by Army drawings and must comply with DCSC Drawing 16236 CS-2300-0001 for paint finishing requirements, which specifies Chemical Agent Resistant Coatings (CARC) and high-temperature coating standards, overriding any conflicting finish requirements in the original Army drawings. The product must not contain or be manufactured using Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. The item includes components subject to Qualified Products Lists or Qualified Manufacturers Lists, requiring adherence to procurement note H02. All manufacturing and quality controls are subject to tailored higher-level contract quality requirements and must meet inspection and acceptance standards at origin, including removal of government identification from non-accepted items. Packaging must comply with DLA requirements, and physical identification of the bare item must be clearly marked. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Suppliers must certify conformance with previous test results if applicable, excluding cases involving design, process, or testing changes. The contract mandates full and open competition and authorizes Certificate of Conformance procedures unless otherwise restricted. Technical data associated with this item is export-controlled under ITAR or EAR, and only DLA contractors with approved JCP certification, completed training, and DLA authorization may access it. The solicitation requires CMMC Level 2 certification for third-party assessors and is governed by the DLA Master List of Technical and Quality Requirements, with revisions as of the solicitation issue date controlling compliance.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

HOSE, NONMETALLICThis contract pertains to the procurement of 293 units of a nonmetallic hose with a part number 3237-0705, manufactured by Gates Corporation, featuring an internal diameter of 0.500 inches and a total length of 29.500 inches, identified by NSN 4720-01-516-3823. The item is classified as a commercial item and a critical application item, requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The hose must not contain or come into direct contact with mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or specific chemical reagents as defined by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Delivery is required within 168 days from contract award, with shipment to be FOB origin, inspected and accepted at the destination, and packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. Packaging must follow DLA-specific requirements, including the use of specified materials and methods with no special marking code applied. The unit of issue is each, with zero tolerance for quantity variance. The delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, California. The contract, issued under solicitation SPE7M4-26-T-241D, was posted on July 9, 2026, with responses due by July 20, 2026, and the original required delivery date was September 28, 2026, with a new ship date specified as January 5, 2027. The procurement falls under NAICS code 313320, with the Department of Defense as the responsible agency and Blake Tushar as the primary point of contact.

FLUID HANDLING DIVISION

POSTED

DEADLINE

SEALThe contract pertains to the procurement of seven units of an item identified by NSN 5330-00-650-9963, with a delivery timeline of 168 days after order. The technical data associated with this item is subject to strict export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure to foreign persons, regardless of location. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory training on handling Department of Defense export-controlled technical data and have been formally approved by the Defense Logistics Agency. DFARS 252.225-7048 governs the handling and dissemination of this information, applying equally to U.S. firms and their foreign subsidiaries. The solicitation number is SPE7L3-26-T-108T, issued by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with a response deadline of July 20, 2026, and a primary point of contact at DLA. Performances will occur at Hill Air Force Base, Utah.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

5 days ago

DEADLINE

in 6 days

AI Contract Overview

A hose assembly, nonmetallic, identified by NSN 4720-01-481-2132, is being procured under solicitation SPE7M4-26-T-199U issued by the Defense Logistics Agency on behalf of the Department of Defense. The request specifies a quantity of one unit and was posted on July 2, 2026, with a response deadline of July 8, 2026. The procurement falls under NAICS code 332996, which pertains to other miscellaneous fabricated metal product manufacturing. The contract is classified as a federal solicitation with no set-aside designation, indicating it is open to all eligible contractors. The place of performance and point of contact details are not specified, and all communications and submissions must be handled through the DIBBS platform via the provided link. The assembly is intended for nonmetallic use, suggesting application in environments where corrosion resistance or electrical insulation is critical.

General Info

Nonmechanical hose assembly, NSN 4720-01-481-2132, single unit solicited by DLA, due July 8, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

313320 - Fabric Coating MillsView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE7M4-26-T-199U.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedJul 2

Solicitation

Amendment 1Jul 2

Contract was updated

Response DeadlineJul 8

Deadline has passed

Submission Closed

07/08/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressUS

Contacts

Blake Tushar

contact@example.gov

+1 (555) 000-0000

Full Description

HOSE ASSEMBLY,NONME
HOSE ASSEMBLY, NONMETALLIC.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR THE NSN/Part Number: 4720-01-481-2132 Quantity: 1 EA Purchase Request: 7017235055QTY: 1 Delivery: 165 days ADO