HOSE ASSEMBLY, NONME

HOSE ASSEMBLY,NONME
HOSE ASSEMBLY, NONMETALLIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
SHELF LIFE MARKINGS REQUIRED PER 5.10.1 OF MIL-STD-129: SHELF-LIFE
MARKINGS SHALL BE SHOWN AS PART OF THE ITEM IDENTIFICATION DATA ON UNIT
PACKS, INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND UNPACKED ITEMS.
SHELF-LIFE MARKINGS SHALL INCLUDE THE CURED DATE AND THE EXPIRATION
DATE. THE EXPIRATION DATE SHALL BE CALCULATED FROM THE CURE DATE OF THE
RUBBER/ELASTOMER.
SPE7M0-26-T-062X
SECTION B
POWER DYNAMICS INNOVATIONS LLC 0T082 P/N 1600911-3 FIND 5
PARKER-HANNIFIN CORPORATION 87373 P/N 8010606060606-24
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017274497 0001 EA 1.000
NSN/MATERIAL:4720015454869
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ UNIT CONTAINER:
1. HOSE ASSEMBLY SHALL BE SECURELY PLACED ON A REEL, ROLL, OR SPOOL WHEN LENGTH OF HOSE REQUIRES THIS TYPE OF PACKAGING AND IT FACILITATES SAFE HANDLING THROUGHOUT THE SUPPLY CHAIN.
2. HOSE ON REEL, ROLL, OR SPOOL SHALL BE PLACED IN WATERPROOF BARRIER BAG FOR CLEANINESS.
3. PACKAGED AND MARKED HOSE SHALL BE PLACED INSIDE SUPPLEMENTAL UNIT CONTAINER (CODE: ED - ASTM-D5118, Type CF, weather-resistant fiberboard container) TO PROTECT HOSE DURING HANDLING, TRANSPORTATION, AND STORAGE.
ZZZ INTERMEDIATE CONTAINER QUANTITY: REFER
TO MIL-STD-2073-1, APPENDIX B, TABLE B.I. TO
DETERMINE ACTUAL QUANTITY PER CONTAINER.
If Product First Article Testing (FAT) is required and a Packaging FAT is included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there
SPE7M0-26-T-062X
SECTION B
PR: 7017274497 PRLI: 0001 CONT’D
is no Product FAT, no Packaging FAT is required.
PARCEL POST ADDRESS:
MMV104
COMMANDING OFFICER
BICMD NAV-P NSE W66 (MMV104)
6200 FLAGSHIP CIRCLE BLOUNT ISLAND
JACKSONVILLE FL 32226-3404
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
MMV104
DISTRIBUTION MANAGEMENT OFFICE
6200 FLAGSHIP CIRCLE BLOUNT ISLAND
M/F: MMV104 BICMD NAV-P NSE W66
JACKSONVILLE FL 32226-3404
US
M/F: (TCN) MMV10461612225
RDD: 168
PROJ: 9GP TP 1
SUPP ADD: YNSE0F SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: 9B ADV: 23 FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:06/24/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018016155 0001 EA 1.000
NSN/MATERIAL:4720015454869
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M0-26-T-062X
SECTION B
PR: 7018016155 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ UNIT CONTAINER:
1. HOSE ASSEMBLY SHALL BE SECURELY PLACED ON A REEL, ROLL, OR SPOOL WHEN LENGTH OF HOSE REQUIRES THIS TYPE OF PACKAGING AND IT FACILITATES SAFE HANDLING THROUGHOUT THE SUPPLY CHAIN.
2. HOSE ON REEL, ROLL, OR SPOOL SHALL BE PLACED IN WATERPROOF BARRIER BAG FOR CLEANINESS.
3. PACKAGED AND MARKED HOSE SHALL BE PLACED INSIDE SUPPLEMENTAL UNIT CONTAINER (CODE: ED - ASTM-D5118, Type CF, weather-resistant fiberboard container) TO PROTECT HOSE DURING HANDLING, TRANSPORTATION, AND STORAGE.
ZZZ INTERMEDIATE CONTAINER QUANTITY: REFER
TO MIL-STD-2073-1, APPENDIX B, TABLE B.I. TO
DETERMINE ACTUAL QUANTITY PER CONTAINER.
If Product First Article Testing (FAT) is required and a Packaging FAT is included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there is no Product FAT, no Packaging FAT is required.
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:D3 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:ZZZ PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ UNIT CONTAINER:
1. HOSE ASSEMBLY SHALL BE SECURELY PLACED ON A REEL, ROLL, OR SPOOL WHEN LENGTH OF HOSE REQUIRES THIS TYPE OF PACKAGING AND IT FACILITATES SAFE HANDLING THROUGHOUT THE SUPPLY CHAIN.
2. HOSE ON REEL, ROLL, OR SPOOL SHALL BE PLACED IN WATERPROOF BARRIER BAG FOR CLEANINESS.
3. PACKAGED AND MARKED HOSE SHALL BE PLACED INSIDE SUPPLEMENTAL UNIT CONTAINER (CODE: ED - ASTM-D5118, Type CF, weather-resistant fiberboard container) TO PROTECT HOSE DURING HANDLING, TRANSPORTATION, AND STORAGE.
SPE7M0-26-T-062X
SECTION B
PR: 7018016155 PRLI: 0001 CONT’D
ZZZ INTERMEDIATE CONTAINER QUANTITY: REFER
TO MIL-STD-2073-1, APPENDIX B, TABLE B.I. TO
DETERMINE ACTUAL QUANTITY PER CONTAINER.
If Product First Article Testing (FAT) is required and a Packaging FAT is included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there is no Product FAT, no Packaging FAT is required.
PARCEL POST ADDRESS:
MMV104
COMMANDING OFFICER
BICMD NAV-P NSE W66 (MMV104)
6200 FLAGSHIP CIRCLE BLOUNT ISLAND
JACKSONVILLE FL 32226-3404
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
MMV104
DISTRIBUTION MANAGEMENT OFFICE
6200 FLAGSHIP CIRCLE BLOUNT ISLAND
M/F: MMV104 BICMD NAV-P NSE W66
JACKSONVILLE FL 32226-3404
US
M/F: (TCN) MMV10462252369
RDD: 240
PROJ: 9GP TP 1
SUPP ADD: YNSE0C SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: 9B ADV: 23 FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:08/21/2026
SPE7M0-26-T-062X NSN/Part Number: 4720-01-545-4869 Quantity: 1 EA Purchase Request: 7018016155QTY: 1 Delivery: 5 days ADO