This Solicitation opportunity from Department Of Defense was posted on August 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HOSE ASSEMBLY, NONME

Closed

SPE7L4-26-U-1155Federal

Submission Closed09/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326220

New

SLED

ITB #27-04 LARGE DIAMETER FIRE HOSE

Solicitation # ITB #27-04

The Butts County Board of Commissioners and Butts County Fire and Emergency Services are soliciting sealed bids under ITB #27-04 for the procurement of seventy-five new sections of 5-inch Large Diameter Hose, totaling 7,500 linear feet. Each 100-foot section must be equipped with factory-installed Storz-type couplings and be resistant to abrasion, moisture, mildew, and ozone. The equipment is intended for municipal fire service operations, including water supply, hydrant operations, and relay pumping. All products must be new, unused, and current production, meeting or exceeding current fire-service hose standards and federal, state, and local requirements. Delivery is required F.O.B. destination to a designated location within Butts County, Georgia, with the successful bidder responsible for coordinating shipment and replacing any non-conforming or defective products at no additional cost. Bids must be submitted in a sealed envelope to the Butts County Administration Office by 3:00 p.m. local time on December 15, 2026. Required submission documents include a pricing sheet covering all freight and delivery charges, detailed product literature, warranty information, a delivery schedule, at least three references, a W-9, and a bid bond on AIA Document A310-2010. The award will be granted to the lowest responsive and responsible bidder based on an evaluation of specifications compliance, total cost, delivery timeline, manufacturer reputation, and warranty support. The successful offeror must provide performance and payment bonds equal to 100 percent of the contract amount on AIA Document A312-2010 and maintain general liability insurance with a combined single limit of 1,000,000 dollars per occurrence. Compliance with the Buy America Act, OSHA standards, and the Georgia Security and Immigration Compliance Act is mandatory.

Butts County Board of Commissioners

POSTED

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the manufacture or procurement of one nonmetallic hose assembly for prime contractors supporting the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The supplier must ensure the assembly conforms strictly to NSN 4720016957749 and provide all necessary Safety Data Sheets for hazardous materials in compliance with 29 CFR 1910.1200(g). The project falls under NAICS code 326220, with the final product delivered via FOB Destination to a performance location in FPO 96306-0001. Interested parties must submit their responses by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Nonmetallic Hose Assembly Manufacturer/SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the manufacture or sourcing of 39 nonmetallic hose assemblies. The assemblies must strictly adhere to NSN 4720123746179 specifications, with marking and labeling performed according to MIL-STD 129 and packaging completed per RP001 DLA Packaging Requirements. Additionally, the supplier must ensure full compliance with the Buy American Act as outlined in DFARS 252.225-7001. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326220, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Nonmetallic Tubing Assembly FabricationThis subcontract involves the manufacture and assembly of 11 nonmetallic tubing assembly sets for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for fabricating assemblies for NSN 4720016916720 in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 326220. Critical compliance mandates include adherence to DFARS 252.204-7012 cybersecurity standards and a strict prohibition on additive manufacturing unless specific authorization is granted. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Nonmetallic Hose (NSN 4720-01-425-2902)This subcontract involves the supply of nonmetallic hose for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing 300 inches of hose that strictly adheres to NSN 4720-01-425-2902 and the DLA Master List RA001. All materials must comply with the Buy American Act, and the use of additive manufacturing is explicitly prohibited. The final products must meet all specified technical requirements and be delivered to Fort Bliss, Texas. This procurement falls under NAICS code 326220, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Hose (NSN 4720-01-611-6586)This subcontract involves the manufacture or sourcing of 4,000 nonmetallic hoses, identified by NSN 4720-01-611-6586, for prime contractors supporting DLA supply contracts. All deliverables must strictly adhere to the technical and quality requirements specified in the DLA Master List. The contract is managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain ESOC Buys. Logistics for the order will be handled through the First Destination Transportation program using Government-Arranged Transportation. The place of performance is located in Jacksonville, and the procurement falls under NAICS code 326220. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Non-Metallic Hose Assemblies (NSN 4720-00-860-8598)This subcontract involves the manufacture or procurement of 23 non-metallic hose assemblies under NSN 4720-00-860-8598 for the DLA Weapons Support Fluid Handling Division. The components must strictly adhere to Air Force Critical Safety Item standards to ensure operational reliability. Final delivery of the units is designated for DLA Dist San Joaquin in Tracy, California. The contractor is required to maintain compliance with specific federal regulations, including DFARS 252.223-7001 for proper hazard labeling and DFARS 252.204-7012 regarding cybersecurity protections. This effort supports prime contractors in fulfilling essential fluid handling requirements for the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Specialized O-Rings (NSN 5331016880596)This subcontract involves the supply of specialized asbestos-free O-rings under NSN 5331016880596 for prime contractors supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The contractor is responsible for delivering two labeled O-rings on an FOB Origin basis, ensuring full supply chain traceability in accordance with DLAD Procurement Notes C03. Strict adherence to packaging and material standards is required, specifically utilizing medium-duty, waterproof, greaseproof, and opaque bags that comply with MIL-DTL-117, Type II, Class C, Style 1 and MIL-STD-2073-1E. The opportunity falls under NAICS code 326220, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720991591994)This subcontract involves the supply of two nonmetallic hose assemblies, specifically NSN 4720991591994, for prime contractors working on DLA Weapons Support Fluid Handling Division projects for the USS ZUMWALT DDG 1000. The contractor is responsible for manufacturing or sourcing these assemblies, ensuring they are free of Class I ozone-depleting chemicals and that all packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129 standards. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with DFARS 252.204-7012. The project falls under NAICS code 326220 and is managed by the Department of Defense. Responses are due by November 16, 2026, for performance located at FPO 96693.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing of NSN 5331013517600 Rubber ComponentsThis subcontract involves the manufacture and supply of 108 units of NSN 5331013517600 rubber components for prime contractors supporting DLA supply contracts. The work is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle SPT, with performance taking place in Tracy, California. All items must be produced using standard rubber manufacturing equipment according to the technical specifications of the NSN, and the use of additive manufacturing or 3D printing is strictly prohibited unless specific authorization is granted. The opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026. It falls under NAICS code 326220, focusing on the production of the specified rubber end items to ensure compliance with military supply requirements.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacturer of Air Duct Hoses (NSN 4720-01-138-9005)This subcontract involves the manufacture and supply of six air duct hoses for prime contractors supporting the Department of Defense Fluid Handling Division. The hoses must be produced according to NSN 4720-01-138-9005 and RA001 specifications using non-additive manufacturing processes. Final products must be packaged in accordance with ASTM D3951 and MIL-STD-129 standards for delivery to Barstow, California. To qualify, manufacturers must maintain SAE AS9003 or ISO 9001 inspection systems and hold certification through the US/Canada Joint Certification Program to ensure ITAR and EAR compliance. The project falls under NAICS code 326220, with a response deadline set for November 6, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Tubing (NSN 4720-01-656-8296)This subcontract involves the supply of three units of nonmetallic tubing for prime contractors supporting DLA supply contracts. The tubing must be of domestic origin and strictly adhere to NSN 4720-01-656-8296 specifications. All items must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards, while maintaining TYPE I (CODE S) shelf-life compliance of 60 months as per RS023/RS001. Managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain ESOC Buys, the contract falls under NAICS code 326220. The place of performance is located in Tobyhanna, Pennsylvania. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 12 days

AI Contract Overview

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L4-26-U-1155 for the procurement of 198 nonmetallic hose assemblies. These components are identified by NSN/Part Number 4720-20-001-5653 and are requested under purchase request 1000240696. The solicitation was posted on August 25, 2026, with a response deadline set for September 9, 2026. This federal requirement is managed through the DLA's procurement system to ensure the acquisition of the specified quantity of hose assemblies for agency operations.