This Solicitation opportunity from Department Of Defense was posted on September 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HOSE ASSEMBLY, NONME

Closed

SPE7M4-26-T-430WFederal

Submission Closed10/05/2026, 01:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332999

New

SLED

Conversion Coated Aluminum Blank SupplyThis subcontract for the City of Greensboro involves the supply of pre-treated .080 gauge aluminum blanks intended for prime contractors. The scope of work requires the application of a chemical conversion coating to the surfaces of the blanks to ensure corrosion prevention and proper sheeting adhesion. All materials and processes must strictly adhere to ASTM B-921 or ASTM B-449 standards, with the final coated blanks delivered directly to the fabricator. The opportunity was posted on November 10, 2026, with a response deadline of November 13, 2026. Classified under NAICS code 332999, this procurement supports infrastructure or municipal projects within North Carolina. Interested parties must coordinate delivery and technical compliance according to the specified industry standards to meet the project requirements.

POSTED

DEADLINE

Manufacturing of TEE, PIPE TO BOSS (NSN 4730014851708)This subcontract involves the manufacture of 22 pipe-to-boss tee fittings under NSN 4730014851708 for the DLA Weapons Support Maritime Supply Chain. The selected contractor is responsible for fabricating the units in strict accordance with provided technical data and specifications, ensuring all finished components are fully inspected prior to delivery. To qualify, the manufacturer must maintain a quality management system compliant with either SAE AS9003 or ISO 9001 standards and adhere to all Buy American regulations. The project falls under NAICS code 332999, with the place of performance located in Tracy, California.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Fluid Pressure Filter Parts Kit SupplierThis subcontract opportunity is for the supply of 74 Fluid Pressure Filter Parts Kits under NSN 4330-01-218-5891 to support prime contractors for the Department of Defense DLA Weapons Support Maritime Supply Chain. The selected supplier is responsible for manufacturing or sourcing all components in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. The contract is designated as a Total Small Business Set-Aside under NAICS code 332999. Compliance requirements are stringent, necessitating US/Canada Joint Certification Program approval, adherence to ITAR and EAR regulations, and the implementation of CMMC Level 2 and NIST SP 800-171 cybersecurity standards. Responses are due by November 20, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Specialized Pin Stock/AlloyThis subcontract involves the supply of specialized pin stock and alloy for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the sourcing and delivery of wire, rod, or bar stock that adheres to the specific chemical and physical properties outlined in the DLA Master List for NSN 5315-01-242-0898. To maintain strict aerospace and defense standards, the provider must supply Mill Test Reports and deliver certified raw material stock directly to the manufacturer. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract is categorized under NAICS code 332999. The place of performance is located in Anniston, Alabama. Interested parties must adhere to the timeline established by the posting date of November 10, 2026, with a response deadline set for November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Reed Valve Manufacturer/Supplier (NSN 4310-01-456-2989)This subcontract involves the manufacture or procurement of 73 Reed Valves for the DLA Weapons Support Maritime Supply Chain. All units must strictly adhere to NSN 4310-01-456-2989 specifications and be produced without the intentional use of mercury. To ensure regulatory compliance, all materials used must be compliant with the Buy American Act. The contractor is responsible for packaging, marking, and palletization in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Once processed, the 73 units must be delivered to DLA Distribution DDSP New Cumberland. This requirement falls under NAICS code 332999 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Valve Component ManufacturingThis subcontract for Precision Valve Component Manufacturing involves the production of precision-machined valve components for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer must produce components that strictly adhere to Parker Hannifin P/N 1475-574524 specifications for Critical Application Items, with quality inspections conducted according to MIL-STD-105/ASQ Z1.4. Deliverables consist of individual components intended for kitting, with performance taking place in New Cumberland. To qualify, the provider must maintain ISO 9001:2015 certification and have completed a CMMC Level 2 self-assessment to ensure the secure handling of Covered Defense Information. This opportunity falls under NAICS code 332999 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacture of Helical Compression Spring RetainersThis subcontract involves the precision manufacture of five helical compression spring retainers for the DLA Weapons Support Land Supply Chain. The project requires the fabrication of components to NSN 5340-01-479-3915 technical and quality specifications using CNC lathes and mills. All work must strictly adhere to dimensional tolerances and the DLA Master List of Technical and Quality requirements, with a specific prohibition on the use of mercury. The contract is categorized under NAICS code 332999 and is managed by the Department of Defense. Performance of the work is designated for New Cumberland, Pennsylvania. Interested parties must respond by November 20, 2026, to meet the established deadline for this procurement effort.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Spring ManufactureThis subcontract involves the manufacture of precision springs for prime contractors supporting DLA land vehicle projects. The work requires the fabrication of springs according to Drawing 8379626, with a specific modification requiring a total compression of .380 inches rather than the 5/16 inch specified in the drawing. Due to the technical nature of the components, the contractor must utilize specialized spring winding and heat-treating equipment to ensure all finished products meet the required specifications. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 20, 2026, for this requirement categorized under NAICS code 332999.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Metal Casting/Forging for Crank AssemblyThis subcontract involves the metal casting or forging of crank assembly components to support DLA land vehicle projects. The selected provider will manufacture rough or semi-finished parts using 4340 Casting per MIL-S-22141, adhering strictly to TDP Rev A Gen 1 and Reference Drawing NR 19207 8376604 Revision G. Responsibilities include the creation and management of all necessary casting tooling. Eligible contractors must hold SAE AS9003 or ISO 9001 certification and maintain full ITAR and EAR compliance. The work is associated with the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance located in New Cumberland. Responses are due by November 20, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Cam Locks (NSN 5342-01-004-9379)This subcontract involves the supply of 10 cam locks, identified by NSN 5342-01-004-9379, for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The provider is responsible for manufacturing or sourcing the locks in strict accordance with the DLA Master List technical requirements. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331, while packaging and labeling must adhere to ASTM D3951, RP001, and MIL-STD-129 standards. Execution of this contract requires the use of precision metal fabrication equipment and mandatory compliance with NIST SP 800-171 security standards. The place of performance is located in Yakima, Washington. Interested parties must respond by November 17, 2026, under NAICS code 332999.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturer of Straight Tube-to-Hose AdaptersThis subcontract involves the manufacture and supply of 474 steel straight tube-to-hose adapters for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The adapters must be fabricated in strict accordance with SAE J516-2021 Revision D and TDP Rev B Gen 2 to ensure full compatibility with SAE 100R5 hoses. Quality assurance must meet MIL-STD-1916 or ASQ H1331 standards, and the manufacturing process is strictly prohibited from using Class I ozone-depleting chemicals. The project is managed under the Department of Defense with performance taking place in Albany. Interested parties should note the response deadline of November 20, 2026. The contract falls under NAICS code 332999, focusing on specialized fabrication to meet rigorous military and industrial fluid handling specifications.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Floor Drain Units (NSN 4510-014398922)This subcontract involves the supply of specialized floor drain units matching NSN 4510-014398922 for prime contractors working on Defense Logistics Agency Troop Support projects. The contractor is responsible for manufacturing or sourcing two units that are mercury-free and strictly adhere to the Buy American Act and Berry Amendment. All deliverables must meet RP001 packaging requirements and comply with MIL-STD-129 and MIL-STD-2073-1E marking standards. The final products are to be delivered to the USNS Miguel Keith located in San Diego, California. This procurement falls under NAICS code 332999 and is managed through the Department of Defense. Interested parties should note the response deadline of November 13, 2026.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

in 3 days

AI Contract Overview

Solicitation SPE7M4-26-T-430W is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for one 6-inch nonmetallic hose assembly. The required item is a rubber, smooth bore, lightweight buoyant type, longitudinally reinforced hose designed for oil and gasoline discharge, identified by NSN 4720-01-396-5194. The contract mandates strict adherence to technical specifications including MIL-DTL-28693B and prohibits the use of Class I ozone-depleting chemicals and intentionally added mercury. The item is designated as a Type I (Code W) with a non-extendable shelf life of 120 months, requiring specific markings per MIL-STD-129. A critical requirement of this contract is the Contractor First Article Test (FAT) per SQAP013965194. The contractor must test five units and submit a comprehensive test report, material certifications, process operation sheets, and manufacturing drawings within 120 days of the contract date. Government fit verification for form, fit, and function will be conducted on the next higher assembly. Delivery for the primary item is required within 155 days, while the FAT delivery is required within 120 days, both shipped FOB Origin to Jacksonville, Florida. Inspection and acceptance will occur at the origin. Invoicing must be processed electronically through the Wide Area WorkFlow system.

General Info

Fixed-price contract for one 6-inch nonmetallic hose assembly delivered to Jacksonville, Florida.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

6200 FLAGSHIP CIRCLE BLOUNT ISLAND, JACKSONVILLE, FL, 32226-3404, USA

Set-Aside

NONE

Documents

20 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedSep 22

Solicitation

Notice updatedSep 22

The notice title changed. The notice description changed.

Response DeadlineOct 5

Deadline has passed

Submission Closed

10/05/2026, 01:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressUSA

Contacts

Blake Tushar

contact@example.gov

+1 (555) 000-0000

Full Description

HOSE ASSEMBLY,NONME
HOSE ASSEMBLY, NONMETALLIC.
HOSE, RUBBER, OIL AND GASOLINE DISCHARGE, SMOOTH BORE, LIGHTWEIGHT
BUOYANT TYPE, LONGITUDINALLY REINFORCED, 6 INCH.
CONTRACTOR FAT REQUIRED IAW SQAP013965194.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Shelf-life Additional Requirements
SHELF-LIFE MARKINGS REQUIRED PER 5.2.1 OF
MIL-STD-129: SHELF-LIFE MARKINGS SHALL BE SHOWN AS
PART OF THE ITEM IDENTIFICATION DATA ON UNIT PACKS<(>,<)>
INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND
UNPACKED ITEMS. SHELF-LIFE MARKINGS SHALL INCLUDE
THE MANUFACTURED, CURED, ASSEMBLED, OR PACKED DATE
(APPLY ONE DATE), AND THE EXPIRATION OR INSPECT/TEST
DATE, AS APPROPRIATE.
FULL AND OPEN COMPETITION APPLY
QUALITY ASSURANCE PROVISION
"ANY ITEM PREVIOUSLY TESTED BY A VENDOR
IN ACCORDANCE WITH QUALIFICATION
REQUIREMENTS (FOR EXAMPLE: FAT, HIGH
SHOCK AND/OR VIBRATION TEST), STATED ON
DWG, SPECIFICATION, OR STANDARD MAY NOT
REQUIRE FURTHER TESTING BY THE SAME VENDOR
SPE7M4-26-T-430W
SECTION B
EXCEPT FOR A LATER CHANGE IN DESIGN,
MANUFACTURING PROCEDURES, OR TESTING
REQUIREMENTS. A CERTIFICATION OF
CONFORMANCE WITH PREVIOUS TEST RESULTS
ATTESTING APPLICABILITY SHALL BE
SUBMITTED FOR ITEMS PREVIOUSLY TESTED."
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
This contract includes a requirement for Government fit verification testing, which consists of testing the First Article unit(s) on the next higher assembly for form, fit, and function. The contractor shall prepare and submit the following: (a) first article exhibits (b) test report showing actual results in accordance with data item description DI-NDTI-80809B, entitled, "Test/ Inspection Report;" (c) material certifications (d) process operations sheets (e) copies of drawings used during manufacturing The Government form, fit and function test time are included within the First Article test time parameters. Vendor is advised that manufacture of production quantity prior to receiving Contracting Officer's acceptance of test samples is not advised and is solely at the risk of the vendor.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-28693B NOT 1 REVISION NR B DTD 12/09/2022 PART PIECE NUMBER: M28693-100
TDP Rev A Gen 1 IAW REFERENCE QAP 16236 SQAP013965194 REVISION NR DTD 12/07/2004 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER: TYPE I SHELF LIFE, 120 MONTHS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE7M4-26-T-430W
SECTION B
PR: 7011553700 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7011553700 0001 EA 1.000
NSN/MATERIAL:4720013965194
DELIVERY (IN DAYS):0155
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
MMV104
COMMANDING OFFICER
BICMD NAV-P NSE W66 (MMV104)
6200 FLAGSHIP CIRCLE BLOUNT ISLAND
JACKSONVILLE FL 32226-3404
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
MMV104
DISTRIBUTION MANAGEMENT OFFICE
6200 FLAGSHIP CIRCLE BLOUNT ISLAND
M/F: MMV104 BICMD NAV-P NSE W66
JACKSONVILLE FL 32226-3404
US
M/F: (TCN) MMV10450790009
RDD: 085
PROJ: 9GP TP 1
SUPP ADD: YNSE10 SIG: A
SPE7M4-26-T-430W
SECTION B
PR: 7011553700 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: ADV: 23 FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:03/25/2025
CONTRACTOR FIRST ARTICLE TEST THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0120
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE7M4-26-T-430W NSN/Part Number: 4720-01-396-5194 Quantity: 1 EA Purchase Request: 7011553700QTY: 1 Delivery: 155 days ADO