HOSE ASSEMBLY, NONME

HOSE ASSEMBLY,NONME
HOSE ASSEMBLY,NONMETALLIC
IAW DETAIL SPECIFICATION TITLED "HOSE ASSEMBLIES, RUBBER, FUEL AND
NONPOTABLE WATER, WITH REATTACHABLE COUPLINGS, LOW TEMPERATURE, GENERAL
SPECIFICATION FOR"
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
RD002, COVERED DEFENSE INFORMATION APPLIES
FULL AND OPEN COMPETITION APPLY
SPE7M4-26-T-182A
SECTION B
Shelf-life Additional Requirements
RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item.
SHELF LIFE MARKINGS REQUIRED PER 5.2.1 OF
MIL-STD-129: SHELF-LIFE MARKINGS SHALL BE SHOWN AS
PART OF THE ITEM IDENTIFICATION DATA ON UNIT PACKS<(>,<)>
INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND
UNPACKED ITEMS. SHELF-LIFE MARKINGS SHALL INCLUDE
THE MANUFACTURED, CURED, ASSEMBLED, OR PACKED DATE
(APPLY ONE DATE), AND THE EXPIRATION OR INSPECT/TEST
DATE, AS APPROPRIATE.
IAW BASIC NON GOVT STD SAE AS38404
REVISION NR DTD 10/07/2006
PART PIECE NUMBER: 1, CLASS 1
IAW REFERENCE SPEC NR MIL-DTL-6615J
REVISION NR J DTD 11/28/2022
PART PIECE NUMBER: P/N: M6615-I-C5000N
IAW REFERENCE QAP 16236 SQAP008423905
REVISION NR DTD 02/06/2009
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017127094 0001 EA 7.000
NSN/MATERIAL:4720008423905
DELIVERY (IN DAYS):0140
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7M4-26-T-182A
SECTION B
PR: 7017127094 PRLI: 0001 CONT’D
BULK BREAK POINT:
M62613
DISTRIBUTION MANAGEMENT OFFICE
BLDG 1710
M/F: M62613 SUPPLY OFFICER
IWAKUNI 740-0025
JP
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
M02209
DISTRIBUTION MANAGEMENT OFFICE
BLDG 1710
M/F: M02209 MCAS IWAKUNI
IWAKUNI 740-0025
JP
MARKFOR
M02209
DISTRIBUTION MANAGEMENT OFFICE
BLDG 1710
M/F: M02209 MCAS IWAKUNI
IWAKUNI 740-0025
JP
M/F: (TCN) M0220961540011
RDD: 214
PROJ: TP 3
SUPP ADD: YFU SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A31 DIST: ADV: 2A FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:06/09/2026
CONTRACTOR FIRST ARTICLE TEST THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
SPE7M4-26-T-182A
SECTION B
PR: PRLI: CONT’D
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0090
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE7M4-26-T-182A NSN/Part Number: 4720-00-842-3905 Quantity: 7 EA Purchase Request: 7017127094QTY: 7 Delivery: 140 days ADO