Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

HOSE ASSEMBLY, NONMETAL

Active

SPE7M4-26-T-097JFederal

Response Deadline07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

An 8-piece lot of nonmetallic hose assemblies is being procured under solicitation SPE7M4-26-T-097J, with each unit featuring a 1.375 inch inside diameter and an overall length of 25.00 inches. The contract, issued by the Fluid Handling Division of the Department of Defense, is classified under NAICS code 332999 and targets a federal procurement need. Deliveries are scheduled for 87 days after award, with performance designated to occur in San Diego, California, 92136-3581. The purchase request number is 7015606490, and the NSN is 4720-01-290-3507. The solicitation was posted on July 21, 2026, with responses due by July 24, 2026, and primary point of contact is Blake Tushar, reachable via email and phone number provided.

General Info

8-piece nonmetallic hose assemblies, 1.375 inch ID, 25 inches long, delivered in 87 days to San Diego.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

SPE7M4-26-T-097J.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedJul 21

Solicitation

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressUS

Contacts

Blake Tushar

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

HOSE ASSEMBLY,NONMETALLIC
HOSE ASSEMBLY, NONMETALLIC.
1.375 IN. INSIDE DIAMETER, 25.00 IN. OVERALL LENGTH.
ADEQUATE DATA FOR THE NSN/Part Number: 4720-01-290-3507 Quantity: 8 EA Purchase Request: 7015606490QTY: 8 Delivery: 87 days ADO

Similar Contracts

Same NAICS industry code

Military-Compliant Packaging, Labeling & Preservation ServicesThe contract requires the provision of military-compliant packaging, labeling, and preservation services for defense shipments, adhering strictly to MIL-STD-129 and DLA RP001 standards. All materials and processes must ensure corrosion protection and full regulatory compliance for use in military logistics, with an emphasis on durability, traceability, and environmental resilience under operational conditions. The work involves end-to-end preparation of items for shipment, including proper identification, marking, and preservation techniques to safeguard equipment and supplies from degradation during storage and transit. This subcontract opportunity is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and a posting date of July 21, 2026. The NAICS code 332999 indicates it falls under other miscellaneous fabricated metal product manufacturing, suggesting the work may involve custom packaging solutions or specialized container fabrication. The place of performance and specific delivery locations are not detailed, but fulfillment is expected to support military supply chain operations globally. Interested parties must submit proposals before the deadline to be considered for award under this unspecified set-aside solicitation.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

HOSE, NONMETALLICThe contract specifies the procurement of one nonmetallic hose with NSN 4720-01-471-4870 and part number 5E-9746, supplied by CATERPILLAR INC, under solicitation SPE7M0-26-T-015B. The item must be delivered within five days to Fort Leonard Wood, Missouri, under FOB origin terms, with no tolerance for quantity variance. All packaging must comply with ASTM D3951 and MIL-STD-129 for labeling and marking, with DLA Master List of Technical and Quality Requirements taking precedence over any other standard. The hose must be palletized according to DLA packaging requirements and shipped via traceable freight methods, excluding parcel post. The shipment is designated as RDD3 with no NMCS requirement, and the delivery address is the US Army Engineer School. The required delivery date is July 22, 2026, and the contract includes strict government-specific identifiers and logistics codes for tracking and accountability. The point of contact for inquiries is Abaigael Masterson, and the procurement is managed by the Department of Defense’s Maritime Supply Chain ESOc Buys.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

TREAD, METALLIC, NONSKIDThe contract is for the procurement of two units of metallic nonskid tread with the NSN 2540-01-593-9652 under solicitation SPE7LX-26-U-8910, designated as a Total Small Business Set-Aside. Delivery is required within 109 days after award, and responses must be submitted by August 5, 2026. The item is governed by DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions including tailored higher-level quality standards, configuration change management, inspection and acceptance at origin, and strict controls on government identification removal from non-accepted supplies. Only qualified manufacturers listed on approved QPLs or QMLs may supply components, and the contract enforces compliance with MIL-STD-1916 or comparable zero-based sampling plans, assigning verification levels and AQLs according to criticality of attributes. Ozone-depleting chemicals are strictly prohibited, and substitute chemicals require prior approval unless explicitly permitted by specification. Technical data is subject to export controls under ITAR or EAR, restricted to contractors with approved JCP certification, completed DLA training, and authorized access. The contract mandates CMMC Level 2 certification for third-party assessors and requires phosphate coating suppliers to meet specific certification standards. The approved source of supply has been updated from Devcon Corp to ITW Polymers Adhesives North America for part numbers PK9500-3/2 and PK9500-3/2-7. The contracting office is the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek as the primary point of contact.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

SWIVEL, LINK AND JAWThe contract covers the procurement of 379 units of a swivel, link, and jaw component identified by NSN 4030-00-169-0816, with a delivery requirement of 474 days from contract award. The item is manufactured using a forging process requiring specific tooling, and sourcing questions must be directed to DLA’s Aviation and Land & Maritime Supply Chains teams. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted per MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. Critical attributes are verified at Level VII with an AQL of 0.1, while unspecified attributes are treated as major. The item is designated as a critical application and must comply with TDP Rev A Gen 1 per specification RR-C-271H Revision H and reference drawing 98752 200415485 Revision E. Mercury and mercury compounds are strictly prohibited in materials, packaging, and processing except for specific functional uses approved by NAVSEA, with additional containment requirements for permitted items. Item unique identification is not required per customer request and DFARS 252.211-7003(c)(1)(i) applies, and the item has no shelf life restriction. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes, and palletization adheres to DLA packaging standards. Delivery is FOB origin, with inspection and acceptance occurring at the manufacturer’s facility. An additional line item for one first article test unit is included, with no separate charge assumed unless specified, and the test requirement quantity is defined in FAR 52.209-4. The contract is issued under solicitation SPE4A5-26-T-299J, with the delivery destination being the DLA Distribution facility in New Cumberland, Pennsylvania, and a required ship date of March 21, 2027.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

SHACKLEThis contract, identified as SPE4A5-26-T-301G, governs the procurement of a shackle with NSN 4030-01-369-7612, quantity 835 units, delivered FOB origin with a delivery window of 158 days from contract award. All technical and quality requirements are controlled by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions tied to the solicitation issue date or amendment dates for large acquisitions. The item is classified as a critical application requiring strict adherence to drawing 12381884 Rev D dated 04/24/1991 and associated QAP 13873, with specific exceptions permitting the use of ASME B18.2.1-1996 and a permanent ink stamp for marking in lieu of electric arc pencil. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Manufacturers must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129, using Preservative 19 on bare metal surfaces and Unit Package Code U, with palletization aligned to RP001. No shelf life applies and Item Unique Identification is waived per DFARS 252.211-7003. Quality conformance is verified through the Certificate of Quality Compliance (CoQC) and Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015), supported by CDRLs including RT001 and RQ006. Casting and forging may be involved in production, and suppliers must engage DLA via the Casting and Forging Assistance Request portal if special tooling or materials are required. Delivery is to DLA Distribution San Joaquin in Tracy, CA, with the original required delivery date set for May 1, 2027 and a need ship date of May 22, 2025. The contract is a total small business set-aside under NAICS 332999, with technical inquiries directed to Hien-Van Trinh at DLA.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

MOTOR, WINDSHIELD WIPERThe contract pertains to the procurement of one electric windshield wiper motor, identified by NSN 2540-01-662-1910 and part number 14009A0983, supplied by OSHKOSH DEFENSE LLC under solicitation SPE7L4-26-T-5732. This is a critical application item with strict compliance requirements, including adherence to the DLA Master List of Technical and Quality Requirements, which supersedes any other standards such as ASTM D3951. The item must be packaged according to DLA Packaging Requirements, labeled per MIL-STD-129, and palletized accordingly, with hazardous material handling governed by TQ requirement IP025 if applicable. Delivery is required within 20 days from the contract award, FOB origin, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The designated delivery point is the Distribution Management Office at Camp Lejeune, NC, and the item must be shipped via traceable freight, explicitly prohibiting parcel post. The required delivery date is July 16, 2026, and the contract includes specific government-only identifiers and operational codes for logistics tracking. The point of contact for inquiries is Anna-Rachelle Betts, with all correspondence routed through the DLA procurement system.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

HOSE ASSEMBLY, NONMEThis contract is for a nonmetallic hose assembly compliant with the technical specification titled "Hose Assemblies Rubber, Fuel and Water, with Reattachable Couplings, Low Temperature," and must adhere to MIL-DTL-6615J as the governing basic specification. The item is identified by NSN 4720-00-202-9618 and part number M6615-I-A5000P, with a total quantity of two units required. The hose assembly is subject to stringent quality and technical requirements incorporated via the DLA Master List of Technical and Quality Requirements, including prohibitions on Class I ozone-depleting chemicals, mandatory configuration change management, and tailored higher-level quality provisions for both manufacturers and non-manufacturers. Full and open competition applies, and the item must be marked in accordance with MIL-STD-130N and MIL-STD-129, including specific shelf-life labeling indicating the manufactured, cured, assembled, or packed date and the expiration date, as it is classified as a Type I (Code W) item with a non-extendable 120-month shelf life. The delivery is FOB origin with a required delivery window of 125 days, and inspection and acceptance are to occur at the point of origin. Packaging must meet MIL-STD-2073-1E standards, including unit packaging, protective methods, and palletization per DLA requirements, with no special marking codes applied. A separate line item for First Article Testing is included with a quantity of one unit, and pricing for this item must be submitted—failure to quote will result in no separate charge being assumed by the government, and the requirement may be waived. The contractor must comply with all sampling protocols, using zero-defect acceptance criteria under MIL-STD-1916 or equivalent zero-based plans for critical, major, and minor attributes. Transportation and shipping instructions are detailed with specific delivery addresses in Honduras, and DLA procurement and logistics notes govern freight and shipping procedures. The contract was issued under solicitation SPE7M0-26-T-014G with a response deadline in August 2026 and an original required delivery date of July 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

HOSE ASSEMBLY SET, METAThis contract is for the procurement of two hose assembly sets, both metallic and nonmetallic, intended for use in the coolant system of the MK 16 Phalanx gun system. The specification references technical and quality requirements from the DLA Master List, with compliance tied to the version in effect on the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, and all items must strictly avoid Class I ozone-depleting chemicals, regardless of any conflicting specification language, with any alternative substances requiring prior approval. The contract mandates strict control over technical data subject to ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons, including foreign nationals within the U.S., with DFARS 252.225-7048 governing such data. Access to export-controlled technical data is limited to contractors with approved JCP certification, completed DOD training, and formal DLA authorization. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance occur at the point of origin. Government identification must be removed from non-accepted supplies, and the contractor must hold CMMC Level 2 certification as a C3PAO to meet cybersecurity requirements. The delivery timeline is 154 days from order, with the contract awarded under solicitation SPE7M4-26-T-272Q and NSN 4720-01-352-1825, with performance to be conducted in Tracy, California.

FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

SPACER, SLEEVEThe contract pertains to the procurement of 182 units of a spacer sleeve with NSN 5365-00-893-5622 and part number S6130-62029-001, supplied by SIKORSKY CORPORATION under solicitation SPE4A7-26-T-587U. Delivery is required FOB origin with no quantity variance permitted, and acceptance occurs at the destination after a 171-day delivery window, with an original required delivery date of July 26, 2027. The item is classified as a critical application component and must comply with DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers, which override all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must conform to DLA’s packaging requirements. Sampling follows an approved alternate plan by SIKORSKY CORPORATION based on ASQ H1331 or MIL-STD-1916, and no unit identification is required per customer request. The delivered units must be packaged per QUP 001 and shipped to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The unit price is $182.00 per each, with total contract value determined by the listed quantity. Transportation logistics are governed by DLAD Proc Notes C19 and C20, and the required ship date is January 17, 2027.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETALThe contract is for 13 nonmetallic hose assemblies with part number 4720-00-883-2232, under solicitation SPE7M4-26-T-272N, with a delivery deadline 237 days after award. Each assembly must be packaged together with its unattached compression sleeve as a single unit, and separate packaging of hoses and sleeves is prohibited. The overall length tolerance for dimension A allows a plus or minus 0.25 inch deviation instead of the standard 0.06 inch. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Ozone depleting chemicals are strictly prohibited in any component or packaging, and any substitute chemicals require prior approval unless explicitly authorized by specifications. Suppliers must provide a Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and submit an electronic copy via the iRAPT system upon delivery. For government inspection at source, the COQC must be available for review during acceptance, and timely upload to iRAPT is mandatory for payment processing. The contract is managed by the Department of Defense’s Fluid Handling Division, with primary point of contact Blake Tushar, and performance is designated for New Cumberland, PA, 17070-5002.

FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

HOSE ASSEMBLY, NONMEThis contract is for the procurement of a nonmetallic hose assembly with a ballistic-resistant sleeve, designated by NSN 4720-01-322-9784 and part numbers AE1008055K0200 and 2Z2517 from Eaton Aeroquip LLC and Eaton Aerospace LLC respectively. The item is classified as a critical application product with a non-extendable shelf life of 120 months, requiring compliance with MIL-STD-129 for shelf-life markings that include the manufactured, cured, assembled, or packed date and the expiration or inspect/test date. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by specifications. All packaging must meet MIL-STD-2073-1E and DLA packaging requirements, with marking conforming strictly to MIL-STD-129 and no special marking codes applied. The item is to be delivered FOB origin in a quantity of six units, with a required delivery date 63 days after contract award and a firm delivery deadline of March 20, 2027. Inspection and acceptance occur at the origin point, with no variance permitted in quantity. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow DLA procedural notes C19 and C20. The contract references technical and quality requirements from the DLA Master List and mandates compliance with source approval documentation per RC001, removal of government identification from non-accepted items per RQ011, and bare item marking per RQ017. The solicitation number is SPE7M4-26-T-272P, issued by the Department of Defense’s Fluid Handling Division, with a response deadline of August 3, 2026, and a unit price of $0.000 with a total contract value of $6.000.

FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

HOSE ASSEMBLY, NONMEThe contract is for a hose assembly, nonmetallic, identified by NSN 4720-01-611-3119, with a quantity of 88 units, each priced at $88.00, for a total value of $7,744.00. Delivery is required within 119 days from contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all items must be marked and labeled per MIL-STD-129. Palletization is governed by DLA Packaging Requirements for Procurement, and no variance in quantity is permitted. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, with the same address provided for freight shipping. The unit of issue is each (EA), and the contract references applicable DLA procedures for transportation and logistics. The solicitation number is SPE7M4-26-T-272T, issued by the Department of Defense’s Fluid Handling Division, with a response deadline of August 3, 2026, and a posted date of July 21, 2026. The NAICS code is 326220, indicating the contract falls under rubber and plastic product manufacturing. The contract mandates strict compliance with DLA’s Master List of Technical and Quality Requirements, which incorporate technical and quality standards identified by R or I numbers. The removal of government identification from non-accepted supplies is explicitly addressed, and the contracting officer for inquiries is William Cooley. The original required delivery date was October 29, 2026, but the need ship date is now December 1, 2026, reflecting potential flexibility in scheduling while maintaining full compliance with all packaging, labeling, and delivery protocols.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

TUBING ASSEMBLY, NONThe contract pertains to the procurement of a non-tubing assembly with NSN 4720-01-556-6162 and part number Q367PTCX8886 from Parker-Hannifin Corp, with a total quantity of 227 units at a unit price of $227.00, resulting in a total price of $51,529. Delivery is required within 91 days from the contract award, with shipment terms set at FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s packaging requirements, with all technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. The item is to be delivered to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, and the original required delivery date is January 10, 2027, with a need ship date of November 3, 2026. No quantity variance is permitted, and government identification must be removed from non-accepted supplies. The contract is issued under solicitation SPE7M4-26-T-272R, with NAICS code 326220, managed by the Department of Defense’s Fluid Handling Division, and all transport logistics are subject to DLAD procedural notes C19 and C20.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

HOSE ASSEMBLY, NONMEThis contract calls for one nonmetallic hose assembly with part number 202527-601 and NSN 4720017253969, quantity of sixteen units, under solicitation SPE7M4-26-T-272J. The item is designated as a critical application for hydraulics and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, preservation, marking, and traceability. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and the item must conform to FAA airworthiness standards, prohibiting the use of Class I ozone-depleting chemicals without prior approval. All packaging and labeling shall adhere to MIL-STD-2073-1E and MIL-STD-129, requiring shelf-life markings that include the manufactured or packed date and the expiration or inspect/test date. The item must be marked in accordance with FAA bare item marking requirements and federal shipping standards, with no special markings required. Delivery is required within seventy-nine days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and inspection and acceptance occurring at destination. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical attributes requiring a verification level of VII or AQL 0.1, major attributes level IV or AQL 1.0, and minor attributes level II or AQL 4.0; any unspecified attributes are treated as major. Acceptance criteria mandate zero non-conformances unless otherwise specified. The contract is a total small business set-aside under NAICS code 326220, with a unit price of $16.00 per unit and a total contract value of $256. The delivery window is firm with no quantity variance permitted, and the original required delivery date is April 8, 2026. Transportation logistics are governed by DLA Procurement Notes C19 and C20, and the point of contact is William Cooley of the Fluid Handling Division, Department of Defense.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

FOOTREST, CHAIR, HELMThe contract pertains to the procurement of three units of a footrest, chair, and helm assembly identified by NSN 2090-01-648-0816 and part number 580-1-010 from STIDD SYSTEMS, INC. Delivery is required within 238 days of contract award, with a firm delivery deadline of March 30, 2027, and all items must be shipped FOB origin with zero variance in quantity. All supplies must comply strictly with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes. The items must be packed in unit containers D3, with intermediate containers labeled E5 and packed under preservation method 10 using dry, non-corrosive materials. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be approved unless explicitly authorized by the specification. Inspection and acceptance occur at the destination facility, and the delivery address is the DLA Distribution center at New Cumberland, Pennsylvania. The contract is issued under solicitation SPE7M4-26-T-272G, with technical and quality requirements governed by the DLA Master List, and the governing revision is determined by the solicitation issue date. Pricing is fixed at $3.00 per unit, totaling $9.00 for the three units, and the point of contact for inquiries is Rory O’Reilly of the Fluid Handling Division within the Department of Defense.

Other Marine Fishing

POSTED

about 17 hours ago

DEADLINE

DISK, VALVEThe contract pertains to the procurement of two poppet screw valves made of brass per specification QQ-B-637, identified by NSN 4810-01-109-2358 and part number 188729-0013 from MAROTTA CONTROLS INC. The items are classified as a critical application component and must be delivered within 168 days of award, with delivery occurring FOB origin under strict quantity control with zero variance permitted. Packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containerization, with all labeling and marking conforming to MIL-STD-129 and no special marking required. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is January 5, 2027, with an original required delivery date of November 3, 2026. The contract enforces stringent material and quality controls, explicitly prohibiting the intentional addition of mercury or mercury-containing compounds in or on the supplied hardware, except for specified exceptions such as functional uses in batteries, fluorescent lights, instruments, sensors, weapon systems, or naval chemical reagents, with portable mercury-containing devices requiring secondary containment per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the governing revision determined by the solicitation or award date depending on acquisition size. The contract also includes guidance for correcting historical data errors in system records related to NSN entries and references transportation protocols via DLAD Proc Notes C19 and C20. The solicitation was issued under contract number SPE7M4-26-T-244D with a response deadline of July 20, 2026, and is managed by the Department of Defense’s Fluid Handling Division.

Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

SWIVEL JOINT, TUBE

POSTED

about 17 hours ago

DEADLINE

HOSE ASSEMBLY, METALThis contract is for the procurement of six metallic hose assemblies, specifically designed as vibration eliminators or absorbers for use in air conditioning systems on the E/I E-2C aircraft. The requirement is part of a solicitation issued by the Defense Logistics Agency’s Fluid Handling Division under contract number SPE7M4-26-T-272U, with a response deadline of August 3, 2026, and a delivery requirement of five days after delivery order issuance. The item is identified by NSN 4720-00-135-8886 and falls under NAICS code 326220. Suppliers must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the contract incorporates cybersecurity requirements under CMMC Level 2, applicable only to third-party assessment organizations. The product is subject to strict export control regulations under ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce, and only DLA contractors with approved JCP certification, completed export control training, and specific DLA approval may access this data. The use of Class I ozone-depleting chemicals is prohibited in any part of the assembly, regardless of specification allowances, and approved substitutes must be submitted for review. Inspection and acceptance occur at origin, and government identifiers must be removed from non-accepted items. The assembly has no shelf life limitation, and all packaging must adhere to DLA procurement standards. The point of contact for inquiries is William Cooley, reachable via phone or email provided.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

LINER, SEAL, PROPELLEThe contract specifies the procurement of liner, seal, propeller components under NSN 2010015158037, with a requirement for one unit per line item across five separate delivery points, all due within 20 days of contract award. Deliveries are FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the final delivery location. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, unit and intermediate container specifications, and marking per MIL-STD-129 without special codes. Palletization must follow DLA packaging requirements, and shipping must avoid parcel post, using only traceable freight methods. Mercury and mercury-containing compounds are strictly prohibited unless used in approved functional applications such as batteries or instrument controls, with additional containment requirements for portable devices. Each shipment is directed to a specific U.S. Navy vessel—USS BOXER, USS TRIPOLI, USS IWO JIMA, USS ESSEX, and USS MAKIN ISLAND—with unique freight and contact details provided for each. The contract is governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to solicitation issue or amendment dates. The solicitation number is SPE7M4-26-T-272B, with a response deadline of August 3, 2026, and an original required delivery date of July 16 to July 20, 2026, depending on the line item.

Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

MANIFOLD ASSEMBLY, H

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

FLANGE, PIPEThe contract specifies the procurement of carbon steel slip-on pipe flanges rated at Class 150, with a nominal pipe size of 1-1/2 inches and bolt holes, manufactured in accordance with ASME B16.5 standards and conforming to the American Society of Mechanical Engineers specifications. The item must be produced using a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains teams. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. The flanges must be free of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance unless otherwise stated, and unspecified attributes are treated as major. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization per DLA packaging requirements, and the item must be marked and labeled accordingly. The contract calls for two units to be delivered within 20 days FOB origin to the Navy Nuclear Power Training Unit in Goose Creek, South Carolina, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and shipment must use traceable freight methods—parcel post is prohibited. The NSN is 4730-00-822-4038, the purchase request number is 7017219152, and the solicitation number is SPE7M3-26-T-6986, with a response deadline of July 24, 2026 and an original required delivery date of June 16, 2026. Full and open competition applies, and all government specifications take precedence over commercial standards.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

TUBE, AIR HORN INTAKE

Other Motor Vehicle Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE