Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Hose Assembly Supply

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of four commercial off-the-shelf hose assemblies with precisely defined part numbers and National Stock Numbers, ensuring full compliance with military specifications. The requirement is issued as a subcontract under the NAICS code 336399, and the place of performance is designated as Cherry Point, North Carolina, with a zip code of 28533-0021. The solicitation was posted on July 21, 2026, and responses must be submitted by July 24, 2026, indicating a tight turnaround window. The awarding entity is the DLA Fleet Readiness Center under the Department of Defense, which implies the assemblies are destined for critical defense or naval operations requiring reliable, standardized fluid transfer components. No set-aside provisions are specified, meaning this opportunity is open to all qualified vendors without preference for small, disadvantaged, or other categorized businesses.

General Info

Supply four COTS hose assemblies to Cherry Point, NC, for DoD, with bids due July 24, 2026.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

336399 - All Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → DLA FLEET READINESS CENTER DLA PSC
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of 4 units of a commercial off-the-shelf (COTS) hose assembly with exact part and NSN specifications.

Similar Contracts

Same NAICS industry code

NAICS: 336399
New
DIBBS
Supply of Non-NSN Defense Equipment Under Delivery OrdersThe contract involves the supply of non-National Stock Number defense-related equipment through Delivery Orders issued by the Defense Logistics Agency under the Department of Defense. It is structured as a subcontract and requires strict adherence to military logistics standards to ensure proper handling, labeling, documentation, and delivery of items not covered by standard NSN classifications. All deliveries must meet DLA’s operational requirements, including compliance with packaging, traceability, and reporting protocols aligned with defense supply chain protocols. The work is performed under the NAICS code 336399, which covers other transportation equipment manufacturing, indicating the specialized nature of the hardware being furnished. The contract is active under delivery order SPE7LX26FB04B, linked to the master contract SPE7LX21D0087, and is posted as of July 20, 2026, with no set-aside classification applied. The place of performance and office address details are unspecified, implying nationwide or global execution flexibility based on DLA’s operational needs. The equipment delivered supports U.S. defense readiness, and fulfillment is governed by DLA’s procurement and logistics framework, with performance monitored through delivery order directives and regulatory compliance checkpoints. The primary point of contact information is not provided, suggesting coordination occurs through DLA’s centralized systems and automated procurement channels.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 336399
New
DIBBS
Supply of Timing Chain and Lever Switch (NSN: 3020014485150)The contract pertains to the supply and delivery of a timing chain and lever switch component designated by NSN 3020014485150, intended for use in military vehicle or engine systems. This is a subcontract under the Department of Defense, specifically managed by LSO COMBAT VEHICLES AND ARMAMENT, with a NAICS code of 336399 indicating it falls under other transportation equipment manufacturing. The component must meet exacting military specifications to ensure reliability and performance in high-stress operational environments. The place of performance is tied to FPO with ZIP code 96694-2900, suggesting delivery to a military forward operating or logistical hub, potentially overseas. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, indicating a tight turnaround for potential suppliers to prepare and submit proposals. The contract does not specify a set-aside category, meaning it is open to all eligible contractors without preference for small businesses or other designated groups. Bidders must be prepared to comply with all defense supply chain requirements, including quality assurance, documentation, and delivery timelines aligned with military readiness standards. The contract is accessible through the DIBBS portal with the reference number SPE7L426T5706, and successful bidders will be expected to ensure full traceability and compliance for military-grade components.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

NAICS: 488190
New
DIBBS
BRACKET, HEATER BLOWERThe contract pertains to the procurement of one unit of a bracket assembly for a heater blower, identified by part number 65511-09014-043 and NSN 1560-LL-NCB-3678, supplied by SIKORSKY AIRCRAFT CORPORATION. This is a critical application item subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I identifiers, which supersede all other standards unless otherwise stated. The item must be manufactured and inspected in accordance with MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan, with critical attributes requiring a verification level of VII or an AQL of 0.1, major attributes at IV or 1.0, and minor at II or 4.0; unspecified attributes are deemed major. Acceptance is strictly zero non-conformances unless otherwise specified, and the manufacturer may choose between attribute or variable inspection under MIL-STD-1916. The item has no shelf life requirement and does not require Unique Item Identification per DFARS 252.211-7003(c)(1)(i). Packaging must comply with ASTM D3951 while adhering to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements. Delivery is FOB destination, with a required delivery date of December 9, 2026, and must occur within 74 days of award. The quantity is fixed at one unit with zero variance permitted, and inspection and acceptance occur at the destination. The delivery address is the Fleet Readiness Center DLA at Cherry Point, North Carolina, with parcel post and freight shipping instructions provided. The solicitation was posted July 21, 2026, with a response deadline of July 29, 2026, under contract number SPEFA5-26-T-0933.
Other Support Activities for Air Transportation

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
HOSE ASSEMBLYThe contract involves the procurement of four hose assemblies identified by part number AE3663163G0094 and NSN 4710-LL-NC0-1366, with a total value of $4.00, delivered under a firm-fixed-price arrangement. Delivery is required at the Fleet Readiness Center in Cherry Point, North Carolina, within 16 calendar days of award, with FOB destination terms placing full transportation risk and cost responsibility on the contractor. All items must be packaged in accordance with ASTM D3951, but the DLA Master List of Technical and Quality Requirements takes precedence over this standard. Packaging and labeling must strictly follow MIL-STD-129, including barcoding and unit identification, and palletization must adhere to DLA’s RP001 packaging requirements. The item is designated as a critical application with no shelf life, and acceptance occurs at the destination point by government personnel. Inspection and sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, employing zero-defect acceptance unless otherwise stated, with specification-critical attributes assigned verification levels or AQLs. The contractor must ensure compliance with all applicable quality assurance systems such as SAE AS9003 or ISO 9001, and provide safety data sheets for any hazardous materials prior to award, with immediate notification of composition changes required. All hazardous materials must be labeled per OSHA’s Hazard Communication Standard, and radioactive materials exceeding specified thresholds must be marked under MIL-STD-129. Electronic invoicing and receiving reports must be submitted via WAWF, and the contractor must comply with numerous DFARS and FAR clauses covering cybersecurity, trafficking in persons, employment eligibility, sustainable products, export control, and whistleblower protections. The contractor is required to have an active UEI and CAGE code, and must represent its small business status and any socioeconomic qualifications, with specific disclosures mandated if involved in joint ventures or if providing covered defense telecommunications equipment. The solicitation closes via DIBBS with no options, extensions, or modification provisions identified, and all technical specifications are derived from the DLA Master List, which governs over any conflicting commercial standards.
Other Support Activities for Air Transportation

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
DIBBS
PLATE, IDThe contract specifies the procurement of 15 identification plates with part number 5001684 and NSN 7690-LL-NC1-7276, supplied by Goodyear Tire and Rubber Company. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The plates must be marked per MIL-STD-130N dated November 16, 2012, and inspections must follow zero-based sampling methods in accordance with MIL-STD-1916 or ASQ H1331 Table 1, with acceptance criteria requiring zero non-conformances unless otherwise stated. Attributes are assigned verification levels or AQLs of VII/0.1 for critical, IV/1.0 for major, and II/4.0 for minor, with unspecified attributes treated as major. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must meet DLA’s RP001 requirements, with all DLA requirements taking precedence over ASTM standards. The material has no shelf life restriction. Delivery is required FOB destination within 15 days of the contract award, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the unit of issue is each, with a total price of $225.00. The items must be shipped to the freight address at Cherry Point, North Carolina, or delivered via parcel post to the PSC address provided. The original required delivery date is September 5, 2026, and the solicitation was issued on July 21, 2026, with responses due by July 29, 2026. The procurement is under contract SPEFA5-26-T-0937, managed by the DLA Fleet Readiness Center, with primary point of contact Larry Kemp. All packaging, labeling, and unit of issue specifications must be strictly adhered to as defined in the contract and related DLA directives.
Other Support Activities for Air Transportation

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SCEW, ADJUSTINGThe contract pertains to the procurement of one adjusting screw with NSN 5305-LN-003-4670 and part number 20007-4 from Triumph Actuation Systems, ordered under solicitation SPEFA5-26-T-0935. Delivery is required within 31 days of the award, with a required delivery date of July 21, 2026, and shipment must be delivered FOB destination with zero variance allowed in quantity. Inspection and acceptance occur at the destination, where the item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which supersede any other standards. Packaging and marking must adhere to MIL-STD-129 and ASTM D3951, with palletization following DLA-specific packaging directives, and all containers must be properly labeled per the designated Unit of Issue and Quantity per Unit Pack as specified. Sampling inspections must follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise stated, with attributes classified per established verification levels or AQLs. The item has no shelf life restriction. The shipping point is the Fleet Readiness Center DLA in Cherry Point, North Carolina, with specific parcel and freight addresses provided for delivery coordination. The unit of issue is each (EA), priced at $1.00 per unit, total price $1.00, and the contract references the DoD-authorized unit of issue through the official DLA link. The primary point of contact is Larry Kemp, reachable via phone and email provided.
Other Support Activities for Air Transportation

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SHIPPING COVER, RPA, PThe contract pertains to the procurement of a SHIPPING COVER, RPA, PLATE with NSN 1730-LN-003-5253 and part number 41009846, with a quantity of 10 units to be delivered within 84 days under contract number SPEFA5-26-T-0936. Delivery is FOB destination, with inspection and acceptance also occurring at the destination location. All items must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede other standards. Packaging must meet ASTM D3951 unless overridden by DLA requirements, and all packaging and labeling must adhere to MIL-STD-129. Palletization must follow DLA Packaging Requirements for Procurement (RP001), and the Unit of Issue and Quantity per Unit Pack are strictly defined. Sampling inspections shall use MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. There is no shelf life requirement. The item is to be delivered to the Fleet Readiness Center DLA at Cherry Point, NC, with parcel post and freight shipping addresses provided. The unit price is $10.00 per unit, totaling $100.00, with no variance allowed in quantity. The original required delivery date is July 21, 2026, and the point of contact is Larry Kemp at DLA Fleet Readiness Center.
Other Support Activities for Air Transportation

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
FLEX DUCT ASSEMBLYThe contract is for the procurement of 25 units of a flex duct assembly with part number 126657-914 under solicitation SPEFA5-26-T-0903, issued by the Defense Logistics Agency Fleet Readiness Center in Cherry Point, North Carolina. This is a total small business set-aside under NAICS code 488190 with a unit price of $25.000 per unit, resulting in a total contract value of $25.000. Delivery is FOB destination to the specified facility at Cherry Point, NC with a required delivery date of July 9, 2026, and a delivery window of 132 days. The quantity is fixed with zero variance allowed. Inspection and acceptance occur at the destination, and payment must be processed through WAWF. Packaging must conform to ASTM D3951 but is superseded by the DLA Master List of Technical and Quality Requirements, and all items must be marked and labeled per MIL-STD-129 and MIL-STD-130N(1) for unique item identification. Palletization follows RP001 DLA Packaging Requirements. Sampling for quality assurance uses MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified. The contract incorporates numerous far and dfars clauses including those related to cybersecurity, human trafficking, employment eligibility, hazardous materials, prohibited equipment, whistleblower protections, and small business subcontractor payments. Offerors must provide a UEI and CAGE code and represent their small business status, with submissions required exclusively through the DIBBS portal by the deadline of July 24, 2026. No radioactive or hazardous materials are specified in the item description, but if present, strict labeling, MSDS reporting, and compliance with OSHA and federal statutes are mandated. The item has no shelf life requirement and is governed by technical and quality standards referenced from the DLA Master List accessible online.
Other Support Activities for Air Transportation

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488190
New
DIBBS
RH ANGLEThis contract, issued by the Defense Logistics Agency under solicitation SPEFA5-26-T-0934, pertains to the procurement of three units of RH ANGLE with NSN 1560-LL-NCB-4204 and Bell Textron Inc part number 205-030-712-39, at a unit price of $3.00 for a total value of $9.00. Delivery is required FOB destination within 129 days of the contract award, with strict zero variance tolerance on quantity and inspection and acceptance to occur at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any conflicting standards. Packaging must comply with ASTM D3951, but only if not overridden by higher-priority DLA standards; markings and labeling must adhere to MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement. Sampling and inspection are to be conducted under MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item has no shelf life requirement. The delivery address for parcel post is PSC 8021, Cherry Point NC 28533-0021, while freight shipments must be sent to Building 148, Bay C, Beachey Road, Cherry Point NC 28533-5040. The required delivery date is February 16, 2027, and the contract mandates compliance with the DoD authorized unit of issue as defined by official tables. All packaging must reflect the correct Unit of Issue and Quantity per Unit Pack as listed in the contract, and the manufacturer retains the option to choose attribute or variable inspection methods under MIL-STD-1916 unless otherwise directed. The contracting office is the DLA Fleet Readiness Center, with primary point of contact Larry Kemp, and the solicitation was posted on July 21, 2026, with responses due by July 29, 2026. The National Aerospace and Defense Contractors Accreditation Program (
Other Support Activities for Air Transportation

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details