This Solicitation opportunity from Department Of Defense was posted on June 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HOUSING, AUXILIARY P

Closed

SPE7L3-26-T-069AFederal

Submission Closed06/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336992

New

DIBBS

Supply of Slide Pads for KNDS Defence UK Limited EquipmentThis subcontract involves the procurement of three slide pads, specifically KNDS DEFENCE UK LIMITED K7705 P/N G414/4699 ITEM 15 (NSN 2590997481421), to support prime contractors on Department of Defense DLA and Army projects. Managed by the DLA Weapons Support Land Supply Chain ESOC Buys, the contract requires strict adherence to MIL-STD-129 for shipment and storage marking, as well as FAR 52.223-3 regulations regarding the identification of hazardous materials. The performance of this contract is centered in Texarkana, Texas, under NAICS code 336992. Interested parties must note the response deadline of November 9, 2026, to provide the specified equipment in accordance with the Department of Defense requirements.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2816

Solicitation SPE7L1-27-T-2816 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one rubber cushioning pad, identified by NSN 2590012151844. The requirement specifies a delivery period of 10 days after receipt of order, with an original required delivery date of October 23, 2026. Shipping is designated as FOB Origin, with the final delivery destination being the US Army SSA Lielvarde in Latvia. Inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and quality standards, including MIL-B-117 for bag fabrication and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements RP001. The solicitation incorporates several federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and cyber incident reporting. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. All quotations must be submitted via the DLA Internet Bid Board System by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L0-27-T-0049

Solicitation SPE7L0-27-T-0049 is a request for quotations issued by the DLA Weapons Support Land Supply Chain ESOC Buys for the procurement of three slide pads. The required material is identified by NSN 2590997481421 and corresponds to KNDS Defence UK Limited part number G414/4699 item 15. The original required delivery date is October 28, 2026, with a delivery timeframe of five days after the order. Items are to be shipped via the fastest traceable means, excluding parcel post, to the DLA LMP Zone 1 facility in Texarkana, Texas. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination. The procurement is subject to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must comply with RP001 for palletization and MIL-STD-129 for marking and labeling. Administratively, the contractor must utilize the Wide Area Workflow system for electronic invoicing and payment requests. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act and Berry Amendment. Offerors are encouraged to submit quotes via DIBBS and may provide quantity ranges due to volatile demand.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2815

Solicitation SPE7L1-27-T-2815 is a small business set-aside for the procurement of one vehicle hatch door, identified by NSN 2510-00-809-7114. The item is to be manufactured via a metal casting process in accordance with specific technical drawings and MIL-DTL-11356. The contract includes requirements for a First Article Test and a Production Lot Test, with the latter requiring a detailed report and supporting documentation, including DD Form 1222 and DD Form 250/iRAPT. Delivery is required within 160 days after the order, with the first article test due within 90 days. The place of performance and delivery is Fort Hood, Texas, with FOB terms set to origin. The contractor must adhere to strict quality and security standards, including an inspection system compliant with SAE AS9003 or ISO 9001 and an approved JCP certification for accessing export-controlled data. Technical inspection is required at the actual manufacturing facility, and acceptance is based on a zero non-conformance sampling plan. Packaging and marking must comply with ASTM D3951 and MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, CMMC Level 2 cybersecurity requirements, and prohibitions on covered defense telecommunications equipment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

CONTROL ASSEMBLY, PUSH-

Solicitation # SPE7L1-27-T-2805

Solicitation SPE7L1-27-T-2805 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of two push-pull control assemblies. The required hardware is identified by NSN 2590013189824 and Chrysler Corp Service and Parts P/N 4383267, intended for use on 1988-89 light duty trucks models B-D. The delivery timeline is set for 20 days after order, with an original required delivery date of October 14, 2026. Shipping is FOB Origin, with the destination for inspection and acceptance located in Bangor, Maine. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 for general packaging, MIL-STD-129 for labeling, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on covered defense telecommunications equipment. Quotations are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

MANIFOLD ASSEMBLY, CMDR

Solicitation # SPE7L0-27-T-0048

Solicitation SPE7L0-27-T-0048 is a request for quotations issued by the DLA Weapons Support Land Supply Chain ESOC Buys for the procurement of seven Manifold Assemblies for a commander's seat, identified by NSN 2540-01-577-6288 and Shaw Development part number 136316-01. The requirement specifies a rapid delivery timeline of five days after receipt of order, with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically the W0MC STK REC ACCT DEPOT REDRVR in Texarkana, Texas. The contract mandates strict adherence to DLA packaging and marking standards, requiring compliance with MIL-STD-129 and RP001. Non-hazardous materials must be commercially packaged per ASTM D3951, while hazardous materials must follow FED-STD-313 and TQ requirement IP025. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The procurement is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity reporting standards, and specific prohibitions on covered defense telecommunications equipment. While the solicitation is listed as a total small business set-aside in some metadata, the document text explicitly states it is not a small business set-aside.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7LX-27-U-0351

Solicitation SPE7LX-27-U-0351 is an Indefinite Delivery Contract issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of vehicular handrails, specifically the Side Rail Assembly, Soft Top (Left Hand), under NSN 2590-01-196-1290. The requirement is for an estimated annual quantity of 79 units, with a guaranteed contract minimum of 11 units and a maximum contract value of 350,000 dollars. Delivery is required within 149 days after receipt of order, with shipping terms set as FOB Destination and inspection and acceptance occurring at the origin. The contract mandates strict adherence to technical and security standards, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Packaging must follow ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. Quality assurance requires a manufacturer's inspection system meeting SAE AS9003 or ISO 9001 standards, with sampling conducted per MIL-STD-1916 or ASQ H1331. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This solicitation may be eligible for automated award and includes a price evaluation preference for HUBZone small business concerns.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

RACK, AMMUNITION STOWAG

Solicitation # SPE7L3-27-T-0924

Solicitation SPE7L3-27-T-0924 is a fixed-price request for quotations issued by the Defense Logistics Agency Weapons Support for the procurement of 18 ammunition stowage racks under NSN 2590-01-525-6327. This effort is a total small business set-aside under NAICS code 336992. The required delivery date is September 20, 2027, with a need ship date of April 6, 2027, and delivery to DLA Distribution Anniston. The contract mandates a delivery period of 161 days after order and specifies FOB Origin terms. The contractor must adhere to strict quality and technical standards, including SAE AS9003 or ISO 9001 certification. Inspection and acceptance will occur at the origin, specifically at the actual manufacturing facility, requiring a technical inspection rather than a simple count and condition check. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and Special Packaging Instruction AK15256327. Additionally, the contract incorporates critical security and regulatory requirements, including CMMC Level 2 certification, ITAR/EAR export controls, and compliance with the Buy American Act and Berry Amendment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

ARM ASSEMBLY, LIFT BLAD

Solicitation # SPE7L3-27-T-0829

Solicitation SPE7L3-27-T-0829 is a total small business set-aside issued by the DLA Weapons Support Land Supplier Opns Vehicle SPT for the procurement of two lift blade arm assemblies, identified by NSN 2590-01-474-5871 and John Deere part number AT181453. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of July 12, 2027, and an original required delivery date of October 31, 2027. Shipping terms are FOB Origin, and both inspection and acceptance will occur at the destination per FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Additionally, the solicitation incorporates critical regulatory requirements, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information and cyber incident reporting. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Defense Base Act (DBA) Insurance ProvisionThis subcontract opportunity, managed by the Department of Defense, seeks a qualified provider or broker to supply specialized Defense Base Act insurance for personnel working on US Army overseas contracts in Kampong Speu, Cambodia. The selected vendor must be an approved Department of Labor provider to ensure full compliance with Federal Acquisition Regulation requirements. The scope of work includes providing detailed pricing estimates and policies, culminating in the delivery of the formal DBA Insurance Policy and Certificate of Insurance. Interested parties must submit their responses by November 20, 2026.

0413 Aq Hq Contract Augmented

POSTED

DEADLINE

Solicitation # SPE7L3-27-Q-0053

The Defense Logistics Agency, under the Department of Defense, is soliciting bids for the procurement of 36 vehicular doors identified by NSN 2541-01-608-2980. This combined contract, listed under solicitation number SPE7L3-27-Q-0053 and NAICS code 336992, is managed by the agency office located in Columbus, Ohio. The solicitation was posted on October 27, 2026, with a response deadline set for November 9, 2026. Interested parties should coordinate through the primary point of contact, DibbsBSM, via the provided email address or the official DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

53--DOOR,ACCESS,WEAPON SYS

Solicitation # SPE4A7-27-T-2106

Solicitation SPE4A7-27-T-2106 is a request for quotations from the DLA Weapons Support ASC for the procurement of five access doors for a weapon system, identified by NSN 5342-01-513-9684. The contract is a total small business set-aside with a need ship date of April 6, 2027, and an original required delivery date of July 2, 2028. Delivery is based on FOB Origin, with the freight shipping destination located at DLA Distribution Red River in Texarkana, Texas. The procurement includes stringent quality and security requirements, including ISO 9001:2015 compliance for the manufacturer's inspection system and CMMC Level 2 certification. Inspection and acceptance will occur at the point of origin, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Invoicing and payment will be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

The solicitation seeks a quote for 10 units of NSN 2590012550866, a housing component designated as AUXILIARY P, to be delivered to DLA Distribution Red River within 157 days after order placement. This procurement is conducted via a Request for Quote under solicitation number SPE7L326T069A, which is available exclusively online through the provided SAM.gov link, with no hard copies offered. All responsible vendors may submit electronic quotes prior to the deadline of June 26, 2026, and responses must be received digitally to be considered. The contract falls under NAICS code 336992, targeting miscellaneous transportation equipment manufacturing, and is managed by the DLA Land and Maritime office in Columbus, Ohio, under the Department of Defense. Technical documentation including digitized drawings and military specifications can be accessed or requested electronically. Any questions regarding the solicitation must be directed via email to the point of contact listed in the solicitation document, with additional details available through the DIBBS website using the solicitation number.

General Info

Procurement of 10 auxiliary housing units, delivered to DLA Red River within 157 days, quotes due June 26, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

NAICS

336992 - Military Armored Vehicle, Tank, and Tank Component Manufacturing

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, USA

Set-Aside

NONE

Documents

RFQ SPE7L3-26-T-069A

rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 15

Combined Synopsis

Response DeadlineJun 26

Deadline has passed

Submission Closed

06/26/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Office AddressUSA

Contacts

Matthew Curry

contact@example.gov

+1 (555) 000-0000

Full Description

HOUSING,AUXILIARY P
HOUSING, AUXILIARY POWER UNIT
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) contact@example.gov. RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RD002, COVERED DEFENSE INFORMATION APPLIES
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
A. Data required by this document will be included in the price of the
SPE7L3-26-T-069A
SECTION B
procured item(s).
B. The supplier shall prepare and furnish one (1) copy of the Certificate of Quality Compliance (COQC) for all delivered supplies. If the supplies delivered under this contract are from more than one manufacturing lot, a separate one (1) copy of the COQC shall be prepared and furnished for each manufacturing lot represented by, manufactured or produced under a product specification, original equipment manufacturer (OEM)/manufacturer's part number, commercial, industry or military standard, or drawings, or other technical data. Each Certificate shall be prepared in accordance with the Supplemental Quality Assurance Provision (SQAP).
C. For contracts assigned for Government inspection at source, the supplier shall have the completed Certificate available for review by the Government representative when the material is presented for acceptance by the Government. The Government representative can sign off on the WAWF receiving report so long as the Contractor complied with the COQC and the documentation is uploaded as an attachment to the Production CLIN in iRAPT.
D. An electronic copy of each COQC, for Government records retention, shall be entered into the Invoicing, Receipt, Acceptance and Property Transfer (iRAPT) system by the supplier via the Attachment tab of the Receiving Report (RR). NSN/Part Number: 2590-01-255-0866 Quantity: 10 EA Purchase Request: 7017047767QTY: 10 Delivery: 157 days ADO