Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOUSING, FUEL PUMP

Active
SPE4A5-26-T-321PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a fuel pump housing identified by NSN 2910-00-492-9426 and part number 75094-9, with a quantity of 14 units to be delivered FOB origin within 171 days, targeting a final delivery date of March 18, 2027. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must conform to MIL-STD-129 and DLA Packaging Requirements (RP001), with palletization adhering to specified guidelines. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under the approved sampling methodology, which defaults to MIL-STD-1916 or a comparable zero-based plan unless otherwise directed. Unit identification is not required per service customer directive, and government markings must be removed from non-accepted supplies. The item is classified as a critical application, and only approved suppliers—Honeywell International Inc. and Boeing Distribution Services X, Inc.—are eligible. Delivery is directed to Hill AFB, Utah, with specific transportation instructions governed by DLAD procedural notes. The solicitation number is SPE4A5-26-T-321P, issued under a federal acquisition framework with a response deadline of August 12, 2026, and the primary point of contact is Dominique Howard of the Department of Defense.

General Info

14 fuel pump housings NSN 2910-00-492-9426 to Hill AFB by March 18, 2027, approved suppliers only, zero tolerance, MIL-STD compliant.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

333618 - Other Engine Equipment ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-321P.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
DOMINIQUE HOWARD
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOUSING,FUEL PUMP
HOUSING, FUEL PUMP.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC. 99193 P/N 75094-9
BOEING DISTRIBUTION SERVICES X, INC. 2N935 P/N 75094-9
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A5-26-T-321P
SECTION B
PR: 7017741446 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741446 0001 EA 14.000
NSN/MATERIAL:2910004929426
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:01/31/2027 Original Required Delivery Date:03/18/2027
SPE4A5-26-T-321P NSN/Part Number: 2910-00-492-9426 Quantity: 14 EA Purchase Request: 7017741446QTY: 14 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333618
New
DIBBS
FILTER ELEMENT, INTA
Solicitation # SPE7LX-26-U-9232
The contract is for the procurement of a filter element, intake, identified by NSN 2940-01-566-5009 and part number 87682999, with a quantity of 551 units, each priced at $551.00 for a total value of $303,601.00. The delivery is FOB origin with a 74-day lead time, and the quantity has zero variance tolerance—no overages or underages are permitted. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization adhering strictly to DLA Packaging Requirements. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, including ASTM D3951. The item is classified under a total small business set-aside with NAICS code 333618, and the solicitation is issued under SPE7LX-26-U-9232, with a response deadline of August 19, 2026. The contract emphasizes that the listed quantity is an estimate and may not be fully purchased by the IDC. All documentation and requirements referenced through R and I numbers are incorporated by reference from the DLA Master List, accessible via the official DLA website. The primary point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333618
New
DIBBS
RADIATOR, ENGINE COO
Solicitation # SPE7L1-26-T-915A
This contract is for the procurement of five engine radiator units identified by NSN 2930-01-709-2109 and part number 2604117C92, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 20 days from the date of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the origin point, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special codes. The item must not contain any Class I ozone-depleting chemicals, and mercury or mercury-containing compounds are prohibited unless specifically exempted for approved applications such as certain batteries, lighting, instruments, or chemical reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Substitute chemicals require prior approval unless authorized by the specification. The end user is the Jordan Armed Forces, with freight shipping directed through Serra International Inc. in Newark, New Jersey, and the order is managed under the Defense Logistics Agency using the unit of issue EA. The solicitation number is SPE7L1-26-T-915A, with a required delivery date of August 4, 2026, and the contract falls under NAICS code 333618 for heating equipment manufacturing.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-910R
The contract is for the procurement of two O-rings, part number RM-0121-16 with NSN 5331-01-451-1731, supplied by HMT INTERNATIONAL LTD under solicitation SPE7L1-26-T-910R. Delivery is required within 20 days of contract award to the Government of Israel, Ministry of Defense, at Chel Hayam Chimush, with FOB origin terms and strict zero variance in quantity. All items must comply with DLA Packaging Requirements, including packaging per MIL-DTL-117 Type II Class C Style 1 using opaque, waterproof, greaseproof material to protect against UV degradation, and marking per MIL-STD-129. The items are excluded from the First Destination Packaging Program and are not eligible for standard commercial packaging. Mercury and mercury-containing compounds are strictly prohibited unless functionally necessary in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and portable mercury-containing devices must have shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. Packaging must also conform to MIL-STD-2073-1E with preservation methods, cushioning, and unit container specifications identified. The contract references the DLA Master List of Technical and Quality Requirements for applicable R and I numbers, with compliance determined by the revision in effect on the solicitation issue date. The point of contact is Kristina Derry, and the solicitation response deadline is August 17, 2026, with an original required delivery date of August 6, 2026.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
HOUSING, FLYWHEEL
Solicitation # SPE7L1-26-T-911K
The contract is for the procurement of one unit of a housing, flywheel with NSN 2815-01-600-3917 under solicitation SPE7L1-26-T-911K, issued by the Department of Defense’s Land Supply Chain. The item must be delivered within five days of contract award to Fort Carson, Colorado, with FOB origin terms and no tolerance for quantity variance. Acceptance and inspection occur at the destination, and packaging must strictly comply with ASTM D3951 and MIL-STD-129, with all requirements from the DLA Master List of Technical and Quality Requirements taking precedence. The unit of issue is each, with a sole quantity of one, and the purchase request number is 7017727199. The delivery must be shipped via traceable means, excluding parcel post, to the specified military receiving point with designated marking and freight details including TCN W80BTZ62120344. All packaging and labeling must adhere to DLA packaging guidelines, including palletization per RP001, and government identification must be removed from any non-accepted supplies. The original required delivery date is August 5, 2026, and the solicitation was posted August 4, 2026, with responses due by August 17, 2026. Point of contact is Kristina Derry, and the NAICS code is 333618 for industrial machinery manufacturing.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7L3-26-T-146N
This contract specifies the procurement of a single filter element, part number 2940-12-409-0982, under solicitation SPE7L3-26-T-146N, with a required delivery in 20 days FOB origin. The item must be supplied in strict compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and must not contain any Class I ozone-depleting chemicals, regardless of any conflicting specification provisions. The filter element is to be delivered to a designated military logistics center in Little Falls, Minnesota, and inspection and acceptance occur at the destination point. The contract permits no variance in quantity, with a fixed order of one unit at a price of one dollar, and requires shipment via the fastest traceable means excluding parcel post. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revision control tied to the solicitation issue date. The supplier must adhere to prescribed packaging codes, unit packaging methods, and palletization guidelines under RP001, with no special marking required. All documentation and delivery logistics are tied to government use codes and internal tracking identifiers, including an RDD of 777 and project code TP 3, with point of contact Amber Rohly through DLA for inquiries.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, INTAKE
Solicitation # SPE7L1-26-T-915C
This contract specifies the procurement of four intake air filter elements with the NSN 2940-01-655-1979 under solicitation SPE7L1-26-T-915C, with a delivery deadline of 20 days after order. The filter element is a restricted-source item requiring government engineering approval, and the specified material must be sourced exclusively from SOLBERG MANUFACTURING, INC. using part number FS-04-038 as defined in drawing 17-3-4137. Compliance with DLA master technical and quality requirements, packaging standards, and the removal of government identification from non-accepted supplies is mandatory. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by the specification. Export control restrictions apply to technical data associated with this item under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and formal authorization may access the controlled data. The contract also mandates cybersecurity maturity model certification level 2 compliance for third-party assessors and requires formal configuration change management procedures for materials related to the Edgewood Chemical Biological Center. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and the place of performance is identified as Queensbury, NY, 12804.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
SENSOR, MANIFOLD ABS
Solicitation # SPE7L1-26-T-912C
The contract specifies the procurement of one unit of a SENSOR, MANIFOLD ABS with NSN 2990-01-681-5046 and part number 04215784 from DEUTZ CORPORATION, under solicitation SPE7L1-26-T-912C. Delivery is required within five days of award, FOB origin, with no allowance for quantity variance. Inspection and acceptance occur at the destination, which is the Logistics Supply Warehouse at Fort Hood, Texas. The item must be packaged in accordance with ASTM D3951 but governed entirely by the DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Palletization must comply with DLA’s procurement packaging requirements, and the unit of issue is a single unit. Shipping must be via the fastest traceable means, explicitly excluding parcel post. The government delivery point, freight address, and mark-for instructions all align with the Fort Hood warehouse location, with the required delivery date set for August 3, 2026, and the item tagged for use under project GB4 TP 1. All technical and quality specifications referenced are controlled by the DLA Master List version in effect at the solicitation issuance date.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
Federal
STARTER, AIR
Solicitation # SPRMM126QMH53
This contract pertains to the procurement of a STARTER, AIR under solicitation number SPRMM126QMH53, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with a response deadline of August 24, 2026. The requirement mandates manufacturing in strict compliance with specified military standards, including MIL-STD-130 Rev N for item marking and MIL-STD-2073 for packaging, and requires full adherence to the Cage Code 72582 and reference number EX56917300063. Contractors must be authorized distributors of the original equipment manufacturer, with proof of authorization submitted with their offer. All deliveries must be accompanied by electronic submission of invoices and receiving reports via the Wide Area Workflow (WAWF) system, and inspections will occur at the source as outlined in DLA Procurement Note E06. The contract explicitly prohibits changes to design, material, servicing, or part number without written approval from the NAVICP-MECH Contracting Officer, with exceptions classified under specific codes that dictate interchangeability and documentation requirements. Quality assurance responsibilities rest entirely with the contractor, who must maintain comprehensive inspection records for at least 365 days after final delivery and ensure all items meet contractual specifications, regardless of any inspection clauses. The contractor may use their own inspection facilities unless disapproved by the government, which retains full rights to conduct independent inspections. Packaging, preservation, and marking must strictly follow the referenced standards, and any changes to the production facility require prior written approval from the Contracting Officer, contingent on no disruption to small business performance, delivery timelines, or F.O.B. point, along with a mandatory $250 administrative cost reduction. All documentation must comply with distribution statements as defined by OPNAVINST 5510.1, with NOFORN and Official Use Only documents requiring formal certification. Contractors are directed to register on the PIEE-EDA portal to access orders and modifications, and to enroll with NAVSUP WSS Mechanicsburg for automated notifications. The contract incorporates multiple mandatory clauses including the Federal Acquisition Supply Chain Security Act, Security Prohibitions, and mandatory use of WFP Mod Assist, and requires that all proposals include a valid email for communications and disclose the OEM if not the manufacturer, with EDI submissions needing explicit documentation of any deviations from solicitation terms.
SPRMM1 DLA Mechanicsburg

POSTED

about 9 hours ago

DEADLINE

in 20 days
View Details
NAICS: 333618
New
Federal
USNS NEWPORT (T-EPF 12) - Engine Parts
Solicitation # N3220526Q7224
The U.S. Navy’s Military Sealift Command is seeking to procure engine parts from Fincantieri Marine Systems for installation onboard the USNS NEWPORT (T-EPF 12), a high-speed transport vessel operated by the Department of Defense. The solicitation, identified as N3220526Q7224, was posted on August 4, 2026, with a response deadline of August 13, 2026, at 2:00 PM Eastern Time. This is a combined solicitation with no set-aside classification, meaning all eligible contractors may compete without restrictions based on business size or type. The North American Industry Classification System code 333618 applies, indicating the requirement falls under other engine equipment manufacturing. The contracting office is located in Norfolk, Virginia, under the Navy’s Mschq Norfolk command, and all performance is expected to support the vessel’s operational readiness. Primary point of contact for inquiries is Richard Bell, reachable via email or phone, and all submissions must be processed through the official SAM.gov portal linked in the solicitation.
Mschq Norfolk

POSTED

about 9 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333618
New
SLED
Standby Generator Supply and DeliveryA 25kW standby generator unit is being procured for delivery to the Menlo Lift Station jobsite under a subcontract agreement, with title transferring to the buyer upon FOB jobsite delivery. The generator must fully comply with California Air Resources Board emissions standards and Cal/OSHA safety regulations, ensuring environmental and operational suitability for the location. The solicitation was posted on August 3, 2026, with responses due by August 24, 2026, under NAICS code 333618 for Electrical Equipment and Supplu Manufacturing. The procurement is managed by the Eastern Municipal Water District in California, and all delivery and compliance obligations must be fulfilled by the vendor to meet the specific requirements of the jobsite.
Eastern Municipal Water District

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 333618
New
SLED
Standby Generator Supply and DeliveryThe contract entails the procurement and delivery of an 80 kW standby generator to the Perris, CA location, with all logistics required to be completed during designated business hours. The supplier is responsible for ensuring the unit meets all technical and operational specifications, and for arranging safe and timely transportation to the site without disruption to normal operations. Delivery must occur within the agreed schedule, and the generator must be fully functional upon arrival, ready for installation and commissioning. This subcontract, posted on August 3, 2026, under NAICS code 333618, is managed by the Eastern Municipal Water District in California and requires proposals to be submitted by August 24, 2026, at 11:00 PM. The opportunity is open to qualified contractors without specific set-aside designations, and all responses must align with the requirements outlined in the solicitation linked through BonfireHub. The supplier must be prepared to comply with all site-specific conditions and delivery constraints, including timing and handling procedures, to ensure seamless integration of the backup power system.
Eastern Municipal Water District

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 333618
New
DIBBS
High-Volume Ejector Assembly Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details