Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HUB AND SHEAVE ASSY

Active
SPE8E6-26-T-4025Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of a HUB AND SHEAVE ASSY with NSN 3415-01-436-6633 and part number 23V1060SK & SK1 3/8 5/16, supplied by Emerson Electric Co Browning Mfg. The quantity required is 13 units, each priced at $13.00, for a total value of $169.00. Delivery must be made FOB origin within 167 days from the contract date, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, cushioning, and unit containerization. Marking must adhere to MIL-STD-129 with no special marking codes, and palletization follows DLA guidelines. The delivery address is the DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and shipping must follow DLAD Proc Note C19 and C20 for transportation logistics. The contract prohibits the intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for specific functional uses approved by NAVSEA such as in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents. Portable devices containing mercury must be shock-proof and equipped with a secondary containment barrier per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue or award date depending on acquisition size. The procurement action is under solicitation SPE8E6-26-T-4025, which was posted on August 5, 2026, with responses due by August 17, 2026, classified under NAICS code 333517 and administered by the Department of Defense through the DDSP New Cumberland Facility. The original required delivery date was November 20, 2026, with the need ship date set for February 1, 2027.

General Info

13 HUB AND SHEAVE ASSY units at $13 each, FOB origin, DLA packaging and marking, delivered to New Cumberland, PA.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333517 - Machine Tool ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E6-26-T-4025 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Jennifer Roome
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HUB AND SHEAVE ASSY
HUB AND SHEAVE ASSY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
EMERSON ELECTRIC CO BROWNING MFG 71176 P/N 23V1060SK & SK1 3/8 5/16
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017758094 0001 EA 13.000
NSN/MATERIAL:3415014366633
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE8E6-26-T-4025
SECTION B
PR: 7017758094 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:11/20/2026
SPE8E6-26-T-4025 NSN/Part Number: 3415-01-436-6633 Quantity: 13 EA Purchase Request: 7017758094QTY: 13 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333517
New
DIBBS
EXPANDER, TUBE
Solicitation # SPE8E9-26-T-3301
This contract is for the procurement of 18 units of an adjustable tube expander with roller mechanism, specified as a one-piece round head mandrel with power operation, featuring a minimum inner diameter of 0.319 inches, a maximum tube sheet thickness of 0.750 inches, and three tapered rollers each 1.000 inch in length, without a flexible tip. The item is classified as a critical application item and must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, specifically under R and I identifiers. Mercury or mercury-containing compounds are strictly prohibited in or in direct contact with the hardware except for functional uses in batteries, fluorescent lamps, specific instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, and any portable fluorescent lamps or instruments containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The product must conform to MIL-E-15809D Technical Data Package Revision A General 1 and meet all applicable packaging, marking, and handling standards including MIL-STD-2073-1E for preparation and MIL-STD-129 for labeling, with no special marking required. Packaging must follow DLA procurement guidelines, with unit containment type D3, no cushioning or dunnage specified, and palletization in accordance with RP001 requirements. Delivery is required FOB origin within 167 days, with inspection and acceptance occurring at the destination, and no variance to quantity is permitted. The item is identified by NSN 3456-00-250-8752 and purchase request number 7017757341, priced at $18.00 per unit for a total of $324.00. The contract is issued under solicitation SPE8E9-26-T-3301, with a response deadline of August 17, 2026, and the original required delivery date set for October 19, 2028. The shipment must be addressed to DLA Distribution at the New Cumberland, PA facility, with transportation details governed by DLAD Proc Notes C19 and C20. The item falls under NAICS code 333517 and is procured by the Department of Defense’s Construction & Equipment MRO SVC I office, with Matthew
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333517
New
DIBBS
GRINDING AND BUFFING M
Solicitation # SPE8E6-26-T-4011
The contract is for the procurement of seven grinding and buffing machines, utility model, under NSN 3415-01-268-7146 and purchase request 7017758465, with a total quantity of seven units to be delivered within 167 days. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and containment standards, and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements. The machine must not contain intentionally added mercury or mercury compounds, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and any portable devices containing mercury must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced from the DLA Master List, and for simplified acquisitions, the revision in effect on the solicitation issue date governs. Delivery is directed to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with the required ship date set for February 1, 2027, though the original delivery date was December 13, 2026. The solicitation was issued under contract SPE8E6-26-T-4011 with a response deadline of August 17, 2026, and is governed by NAICS code 333517 under the Department of Defense.
SAN DIEGO

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333517
New
DIBBS
PUNCH, METAL PUNCHING M
Solicitation # SPE8E5-26-T-3802
The contract specifies the procurement of seven metal punching machines under NSN 3456-01-137-3128, with a unit price of $7.00 per unit and a total contract value of $49.00. The item is to be delivered FOB origin within 167 days, with delivery required by October 21, 2026, though the need ship date is set for February 1, 2027. Packaging must comply with MIL-STD-2073-1E and ASTM-D-3951, using new and unused containers, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization follows DLA’s packaging requirements, and shipping is directed to DDSP New Cumberland Facility in New Cumberland, PA. Inspection and acceptance occur at destination, with zero variance allowed in quantity. Mercury and mercury-containing compounds are strictly prohibited unless exempted for specific functional components like batteries, lights, sensors, or weapons as defined by NAVSEA, and all portable devices containing mercury must include a secondary containment and be shock-proof per NAVSEA 5100-003D. The contract incorporates technical and quality standards listed in the DLA Master List, with revisions controlled based on solicitation or award dates. Transportation logistics are governed by DLAD Proc Notes C19 and C20, and the purchasing unit aligns with DoD authorized standards. The contracting office is the Department of Defense, with Khue Nguyen listed as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333517
New
Federal
Mill Turn Machine for the Watervliet Arsenal
Solicitation # W911PT26QA084-Solicitation
This contract is a sole-source procurement issued by the Department of Defense through the Watervliet Arsenal in New York for the acquisition of one Mill Turn Machine, with an optional second unit, to support the arsenal’s cannon manufacturing process. The machine must be fully configured and installed in strict compliance with the Watervliet Arsenal Manufacturing Engineering Work Group Specification #01-26-3416 dated January 29, 2026. Although designated as sole-source, all responsible proposals are eligible for consideration, allowing qualified vendors to respond. The solicitation falls under NAICS code 333517 and carries no set-aside requirements, making it open to all eligible contractors. The procurement is managed by the W6QK Acc Wva office, with the primary point of contact being Coby Brickner, reachable by phone or email, and Lauren Scripps as the secondary contact. Proposals must be submitted by 8:00 PM Eastern Time on August 12, 2026, and the machine is to be delivered and installed at the Watervliet Arsenal location in New York with a ZIP code of 12189.
W6QK Acc Wva

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333517
New
Federal
13 AMU Laser Engraver
Solicitation # FA520526QB127
The solicitation seeks a single Laser Engraver to be delivered to Misawa Air Base in Japan, with the equipment required to fully comply with the salient characteristics of the Epilog Fusion Pro 36 Dual, though equivalent alternatives are acceptable. The contractor must supply all necessary hardware, accessories, documentation, and standard components to ensure the device is fully operational and capable of performing all specified tasks. This is a brand name or equal procurement under FAR part 12, and no separate written solicitation will be issued—the announcement serves as the complete request for offers. All submission deadlines and timelines referenced are in Japan Standard Time. Funds are not currently available for this contract, and the government's obligation is contingent upon future appropriation of funds; no legal liability is incurred until the Contracting Officer confirms in writing that payment funds are available. The NAICS code for this procurement is 333517, and there is no set-aside designation. The solicitation number is FA520526QB127, posted on August 5, 2026, with responses due by August 10, 2026, at 01:00 JST. The contracting office is located in APO, AP, and the point of contact is Alexander Holliday, with Rebecca Rohrs available for secondary inquiries. The place of performance is Misawa-shi, Aomori-ken, Japan.
FA5205 35 Cons Pk

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333517
New
Federal
SOURCES SOUGHT NOTICE | Rotary Parts Finishing Machine
Solicitation # 36C24426Q0850
The U.S. Department of Veterans Affairs, through the 244-NETWORK Contract Office 4 located in Pittsburgh, Pennsylvania, has issued a Sources Sought Notice for a Rotary Parts Finishing Machine, identified by solicitation number 36C24426Q0850. This notice seeks industry input to determine the availability of capable small businesses and to assess market interest for the procurement of equipment under the NAICS code 333517, which pertains to machine shop, tools, and die making machinery manufacturing. The response deadline is Monday, August 17th, 2026, at 4:00 PM Eastern Standard Time, and responses must be submitted prior to this time to be considered. No set-aside is currently designated for this solicitation, indicating that all eligible contractors may respond. The contract is not yet awarded and is in the exploratory phase to gather market data, ensuring the government’s requirements are feasible and competitively sourced. The place of performance is in Pittsburgh, Pennsylvania, with a zip code of 15206, and all communications should be directed to the primary point of contact, Tyler Kraft, at tyler.kraft@va.gov, or the secondary contact, Andrea Aultman-Smith, at andrea.aultman-smith@va.gov. Additional details regarding technical specifications and submission requirements are contained in the attached documentation referenced in the notice. The full solicitation and related information can be accessed via the SAM.gov link provided.
244-NETWORK Contract Office 4 (36C244)

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333517
New
Federal
Specimen Surface Laser Marking Device-Forest Products Laboratory
Solicitation # 12444526Q0066
The USDA Forest Service is soliciting a sole-source order for a 3-axis, air-cooled, 7W UV laser marking system operating at 355 nm, intended for high-contrast, cold patterning on wood specimens at the Forest Products Laboratory in Madison, Wisconsin. The system must feature an IP64-rated enclosure, a 30 μm spot size, automatic contour tracking with ±20 mm range, and repeatability of ±10 μm to ensure precise, non-destructive surface marking for material research without thermal damage. While the solicitation is issued as a sole-source under FAR 13.501(a) for Keyence Corporation of America (UEI: L66VDJVM3VP6), other responsible sources are permitted to submit quotes. The acquisition is conducted under FAR Subpart 12.6 as a commercial items procurement using a firm-fixed-price contract structure, adhering to FAR 52.212-4 and its Alternate I. The required delivery date is August 30, 2026, with FOB Destination terms placing all transportation risks and costs on the contractor until formal acceptance at the receiving dock. All offers must be submitted via email to Michael.Wheelock@usda.gov no later than August 7, 2026, at 9:00 A.M. EST, using the Standard Form 1449, supplemented by a Certificate of Conformance (FAR 52.246-15) that ensures full traceability to the original equipment manufacturer. Payment is mandatory through the Treasury’s Invoice Processing Platform (IPP.gov) per FAR 52.232-33, with no other invoicing methods accepted. Evaluation will be based on technical acceptability, past performance, and price reasonableness in a best-value trade-off, not a lowest-price technically acceptable process. Technical compliance is non-negotiable, requiring adherence to specific salient characteristics such as laser wavelength, power, resolution, and environmental protection. The contract includes comprehensive compliance clauses covering whistleblower rights, anti-trafficking, equal opportunity, Buy American and Trade Agreements, cybersecurity safeguarding, privacy training, and DEI compliance under newly issued provisions. The estimated contract value ranges from $85,265 to $95,265, encompassing the base equipment and potential long-term maintenance support. Acceptance will occur at the delivery location, with the government responsible
Csa East 6 Usda-Fs

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 333517
New
DIBBS
ENGRAVING MACHINE, P
Solicitation # SPE8E5-26-T-3756
The contract is for the procurement of one Gravograph-New Hermes engraving machine, model P/N 29-043-0TM or V7200, identified by NSN 3417-01-466-0285, under solicitation SPE8E5-26-T-3756. Delivery is required within twenty days of award, FOB destination, with no variance allowed in quantity. The item must comply with all DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specified packaging methods, materials, and unit containment, and must be marked in accordance with MIL-STD-129 with no special marking codes. Mercury or mercury-containing compounds are strictly prohibited unless part of approved functional components such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices as defined by NAVSEA 5100-003D. The machine must be shipped via the fastest traceable means, not parcel post, to the US shipping address for USS ANCHORAGE LPD 23 at FPO AP 96666, using the VSM system and referencing RDD 777. The required delivery date is July 20, 2026, and the contract enforces full adherence to technical and quality standards from the DLA Master List, with compliance governed by the revision in effect on the solicitation issue date. The point of contact for the Defense Logistics Agency is Don Trachtman, and the acquisition falls under NAICS code 333517 for industrial machinery manufacturing.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333517
New
Federal
Industrial Laser Cutting System Supply
FA4418 628 Cons Pk

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 333517
New
Federal
DESKTOP LATHE AND MILL
Solicitation # SPMYM226Q7799
This solicitation, numbered SPMYM26Q7799, seeks quoted bids for a DESKTOP LATHE AND MILL from contractors responding to the U.S. Department of Defense through DLA Maritime - Puget Sound. All solicitation details and amendments will be posted exclusively on SAM.gov, and electronic quote submissions are required through the same platform. Bids must be submitted via email to diana.baldwin@dla.mil by Wednesday, August 5, 2026, at 10 a.m. PST, and must include a fully completed and signed solicitation form to be deemed responsive. The contract requires quotes to be furnished FOB Destination Silverdale, WA, with clear lead times or delivery dates provided. Contractors must supply complete information including their CAGE code, point of contact, manufacturer details, country of origin, and compliance with applicable FAR clauses such as 52.204-24 and 52.212-3. Contractors subject to NIST SP 800-171 cybersecurity requirements must have a current assessment on file, no more than three years old, unless otherwise specified. However, items classified as Commercial Off The Shelf (COTS) are exempt from this requirement, and bidders must explicitly identify and provide documentation for any COTS items during submission. All mandatory fields must be completed on the solicitation form, including Section K for manufacturer data and Section F for delivery timelines. Failure to sign boxes 30a, 30b, and 30c on page one, or to accurately complete any designated section, will render the bid non-responsive. The deadline for response is August 6, 2026, at 5 a.m. PST, and the NAICS code for this procurement is 333517, indicating the procurement falls under precision instrument and equipment manufacturing.
DLA Maritime - Puget Sound

POSTED

2 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 333517
New
Federal
Tools
Solicitation # W911S226U3903
The contract solicitation titled Tools under solicitation number W911S226U3903 is a combined solicitation issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is designated as a Small Business Set Aside with full set-aside status, meaning only small businesses as defined by the Small Business Administration are eligible to compete. The North American Industry Classification System code 333517 corresponds to the manufacturing of industrial machinery, indicating the requirement is for tools likely used in industrial or military maintenance and repair operations. Responses are due by August 12, 2026, at 4:55 AM Eastern Time, with the solicitation posted on August 3, 2026. The primary point of contact is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or phone at 703-614-0476. The place of performance is listed with a zip code of 22211, suggesting delivery or service may be required primarily in the Arlington, Virginia area, despite the issuing office being based in New York. All interested parties must review the full listing of required tools provided in the attachment to ensure compliance with technical specifications.
W6QM Micc-Ft Drum

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333517
New
Federal
WATERJET MACHINING CENTER (SOLE SOURCE)
Solicitation # SPMYM226Q7742
The solicitation for a WATERJET MACHINING CENTER is a sole source opportunity issued by DLA Maritime - Puget Sound under solicitation number SPMYM26Q7742, with a posting date of August 3, 2026, and a firm response deadline of August 7, 2026, at 5:00 PM Eastern Time. Bids must be submitted via email to TRICIA.WINTERSTEEN@DLA.MIL and must include a completed and signed solicitation, manufacturer information, country of origin, and lead time for delivery quoted FOB destination. Items classified as Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 compliance requirements, but bidders must clearly identify and provide supporting documentation to the contracting officer during the solicitation period. For non-COTS items, contractors must have a current, valid assessment under DFARS 252.204-7019, not older than three years, unless a shorter period is specified. The place of performance is in Silverdale, Washington, with the contracting office located in Bremerton, WA. This procurement does not utilize any set-aside provisions and falls under NAICS code 333517. All details and amendments will be publicly accessible via the SAM.gov website.
DLA Maritime - Puget Sound

POSTED

2 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details