Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HUB, BODY

Active
SPE7L1-26-Q-1377Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified by solicitation number SPE7L1-26-Q-1377, requires the delivery of 18 units of HUB, BODY with NSN 3040-00-938-2983 to Hill AFB, Utah, with a delivery deadline 348 days after award. Full and open competition applies, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling for this simplified acquisition. The contract mandates compliance with MIL-STD-130N for identification marking of U.S. military property, prohibits the use of Class I ozone-depleting chemicals in any supplied items, and requires approval for any substitute chemicals not explicitly authorized. Export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The contract also enforces DLA packaging standards, requires CMMC Level 2 certification for third-party assessors, includes tailored quality requirements for both manufacturers and non-manufacturers, mandates inspection and acceptance at origin, enforces configuration change management through engineering change proposals and variance requests, and imposes requirements for measuring and test equipment. All parties must comply with the removal of government identification from non-accepted supplies and adhere to covered defense information protections.

General Info

Deliver 18 HUB BODY units to Hill AFB in 348 days under strict DLA, MIL-STD-130N, ITAR/EAR, and CMMC Level 2 requirements.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE7L126Q1377.PDF

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Troy Timmerman
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HUB<(>,<)> BODY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
FULL AND OPEN COMPETITION APPLY
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RT001: MEASURING AND TEST EQUIPMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United
SPE7L1-26-Q-1377
SECTION B
SUPPLY/SERVICE: 3040-00-938-2983 CONT'D
States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3040-00-938-2983 Quantity: 18 EA Delivery: 348 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
SHAFT, SHOULDEREDThe contract is for the procurement of a SHAFT, SHOULDERED with NSN 3040-00-200-1392 and part number 195533, supplied by AERO INTERNATIONAL, LLC, under solicitation SPE7LX-26-U-9041. It is a Total Small Business Set-Aside with a NAICS code of 333613 and includes a requirement for Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. The item is classified as a Critical Application Item and must comply with DLA packaging standards per RP001 and MIL-STD-2073-1E, with specific packaging codes and marking per MIL-STD-129. Delivery is to be FOB origin within 151 days, with inspection and acceptance occurring at the destination. The quantity is strictly fixed at 15 units with no variance allowed and is estimated, meaning the IDC may not purchase all units. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances unless otherwise specified, and attributes must be verified at assigned levels or AQLs. Item Unique Identification is not required per the Service customer's request. Measurement and test equipment must meet applicable standards, and all technical and quality requirements are governed by the DLA Master List. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
HEAD, LINEAR ACTUATINGThe contract specifies the procurement of eight units of a head linear actuating cylinder with NSN 3040-01-214-3924 and part number 6-701-000210, under solicitation SPE7L0-26-T-0385. Delivery is required within five days of award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. All items must be packaged in compliance with ASTM D3951 and marked in accordance with MIL-STD-129, with packaging requirements governed by the DLA Master List of Technical and Quality Requirements, which take precedence. Palletization must follow DLA packaging standards, and shipment must be sent by the fastest traceable means, excluding parcel post. The delivery address is DLA LMP Zone 1, Building 552 North, 7th Street Avenue, Texarkana, TX 75507-5000, and the required delivery date is July 29, 2026. The unit price is $8.00 per item, resulting in a total contract value of $64.00. The item is classified under NAICS code 333613 and is being procured by the Department of Defense through the Land Supply Chain ESOC Buys office, with Jeffrey Bloom listed as the primary point of contact. Government-specific identifiers including the shipping control number W45G18, project code TP 1, and distribution codes are included for internal tracking and logistics purposes.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
MODULATOR, TRANSMISSThis contract pertains to the procurement of one unit of a MODULATOR, TRANSMISS with NSN 2520-01-677-5095, issued under solicitation SPE7L1-26-T-884L by the Department of Defense through the Land Supply Chain. The requirement is for delivery within five days of contract award, with FOB origin terms and zero tolerance for quantity variance. The item must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA Packaging Requirements. Hazardous materials handling is governed by IP025, and ozone-depleting chemicals are strictly prohibited, with any substituted materials requiring prior approval. The item must be shipped by the fastest traceable means, excluding parcel post, to the designated delivery point at Fort Bragg, North Carolina. Inspection and acceptance occur at destination, and all packaging data, including preservation methods and container specifications, are defined per government standards. The contract enforces compliance with technical and quality requirements referenced in the DLA Master List, and all government identification must be removed from non-accepted supplies. Specific marking codes, shipping addresses, and points of contact are detailed, with a required delivery date of July 27, 2026, and the item is to be delivered under a simplified acquisition framework.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
PLATE, RETAINING, SHAThe contract specifies the procurement of retaining plates for shafts under NSN 3040016798528, with four line items each requiring two units at a unit price of $2.00, totaling $4.00 per line item. All items must be delivered within ten days FOB origin, with no tolerance for quantity variance, and are subject to inspection and acceptance at the destination. The delivery address is Fort Hood, Texas, with detailed shipping and marking instructions referencing MIL-STD-129 and ASTM D3951 packaging standards, though all DLA Master List of Technical and Quality Requirements take precedence. Packaging must comply with RP001 DLA packaging requirements, including palletization, and the use of ozone-depleting chemicals is strictly prohibited. The contract number is SPE7L1-26-T-884W, with an original required delivery date of July 22, 2026, and the item is sourced through the Department of Defense’s Land Supply Chain. The unit of issue is each, and all markings, labeling, and transport logistics follow specified DoD and DLA protocols, including freight and transportation directives.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGThis contract pertains to the procurement of 14 connecting links, rig, identified by NSN 3040-01-091-3844, under solicitation SPE7L1-26-T-882Q, with a delivery timeframe of 641 days ADO. The contractor is required to conduct first article testing on one unit of the specified item and submit a detailed test report within 120 calendar days of contract award, with prior written notification to the contracting officer and quality assurance representative at least 14 days before shipment for government final acceptance testing. The government will issue a written approval, conditional approval, or disapproval of the first article within 120 days of receiving the test report. Production lot testing is mandated following first article approval, requiring the contractor to provide a 14-day advance notice prior to presentation of the production lot for sample selection; one unit will be randomly selected for testing unless otherwise specified in the technical data package. The contractor must bear the cost of samples consumed during testing and ensure all units are shipped via traceable means to the Redstone Technical Test Center with specific labeling and documentation, including signed DD Forms, test results, certifications, drawings, and a prepaid return label for sample restoration. All submissions must comply with MIL STD 129 and the supplemental requirements outlined in Procurement Note H03 and E04. Fast Pay is not applicable, and the contractor must confirm current dealer or distributor certification and accreditation. The contracting office is located at the Department of Defense’s Land Supply Chain in San Diego, with Dillon James as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
ROD, PISTON, LINEAR AThe contract specifies the procurement of one unit of a rod, piston, linear actuating cylinder with NSN 3040-01-545-0450 and part number 590/40154, sourced from JCB INC. The item must be delivered within five days under FOB origin terms, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply strictly with ASTM D3951 and MIL-STD-129 labeling requirements, while prioritizing all DLA Master List of Technical and Quality Requirements over ASTM standards. Palletization must adhere to RP001 DLA Packaging Requirements for Procurement, and the unit of issue is single ea. The shipment must be sent via fastest traceable means, excluding parcel post, to the designated freight shipping address in Fort Worth, Texas. The required delivery date is July 29, 2026, with a project code of TP 1 and a military freight designation RDD 999/NMCS. A government-use-only identifier IPD 03 and DIC A3A are included for internal tracking. The solicitation number is SPE7L1-26-T-883B, issued under a federal acquisition framework with NAICS code 333613. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List effective on the solicitation issue date, and the point of contact is Kristina Derry at DLA.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
COUPLING, SHAFT, FLEXThis contract specifies the procurement of a flexible shaft coupling identified by NSN 3010-00-775-7658, with a quantity of 41 units to be delivered FOB origin within 126 days after order, with a required delivery date of February 28, 2027. The item must be manufactured using a metal casting process and all associated tooling and material sourcing require coordination with designated DLA supply chain teams. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with revised standards effective on the solicitation or award date depending on acquisition size. Strict prohibitions apply against the use of Class I ozone-depleting chemicals, superseding all other specification requirements, and any substitutes must be pre-approved unless explicitly authorized. Components must be sourced from qualified products or manufacturers listed on approved QPL or QML lists, and configuration changes require formal engineering change proposals or variance requests. Inspection and acceptance occur at origin, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, and critical, major, and minor attributes must be verified at corresponding levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking in compliance with MIL-STD-129 and no special marking codes. Palletization follows RP001 guidelines, and all units must be shipped to the designated DLA warehouse in Tracy, California. The contract requires full and open competition, and any data deliverables under CDRL COQC26124 must be included in the unit price without separate line-item pricing. The item is designated as a critical application, subject to stringent quality controls and oversight, with measuring and test equipment requirements strictly enforced.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
ACTUATOR, MECHANICAL, NO
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
PISTON, LINEAR ACTUAThe contract is for one linear actuating cylinder piston, identified by NSN 3040-01-167-9213 and part number 8J0113 from Caterpillar Inc, with a single unit of issue and a total price of $1.00. Delivery is required within 10 days to Fort McCoy, Wisconsin, under FOB origin terms, with no variance allowed in quantity. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including compliance with MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement, and shipments must be delivered via traceable freight methods, excluding parcel post. The shipment is designated as an RDD/ANMCS movement with a reference number and project code TP 2, and must be marked for delivery to the designated government facility. Inspection and acceptance occur at the destination, and the original delivery date is July 23, 2026. The contract is issued under solicitation SPE7L1-26-T-879S, with a response deadline of August 7, 2026, and falls under NAICS code 333613 for industrial machinery manufacturing. All requirements are governed by the DLA Master List, and government use identifiers and control codes are included for internal tracking and logistics purposes.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
RING, PISTONThe contract is for the procurement of 3,604 piston rings with NSN/part number 3040-01-031-7500 under solicitation SPE7L3-26-U-0648, issued by the Department of Defense’s Land Supplier Operations Vehicle Support agency. The solicitation is a total small business set-aside under FAR 19.5 with a NAICS code of 333613, and responses are due by August 11, 2026, with delivery required within 127 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the item is subject to stringent export controls under ITAR or EAR, restricting disclosure of technical data to unauthorized foreign persons, even within the U.S. Contractors must hold a valid US/Canada Joint Certification Program status, complete mandatory DOD export control training, and receive formal DLA authorization to access controlled data. The contract mandates adherence to DLA packaging standards, removal of government identification from non-accepted supplies, configuration change management via engineering change proposals or variance requests, and inspection and acceptance at the manufacturer’s origin. Measuring and test equipment must meet defined standards, and cybersecurity compliance requires CMMC Level 2 certification for any third-party assessors involved. Full and open competition applies, with all requirements enforceable under applicable DFARS clauses including 252.225-7048.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
GEAR, ANTIBACKLASH, SThe contract pertains to the procurement of a stainless steel spur gear with antibacklash features, specified by NSN 3020-01-012-3470 and part number 10138, featuring 120 diametral pitch, 20-degree pressure angle, 0.7166-inch outside diameter, and 0.0901-inch bore diameter. The gear must comply with stringent technical and quality standards referenced from the DLA Master List and adhere to MIL-STD-2073-1E packaging requirements with marking in accordance with MIL-STD-129. No ozone-depleting chemicals are permitted under any circumstances, and any substitute materials must be pre-approved. The item is classified as a critical application part and requires compliance with CMMC Level 2 cybersecurity self-assessment. The contract includes two line items: one for seven standard units, priced at $7.00 each, with delivery due in 305 days to the Tainan Branch Warehouse in Taiwan, and a separate line item for one unit designated for First Article Testing, priced at $1.00 but eligible for waiver if testing is not required. The item must be delivered FOB origin with no quantity variance allowed, inspected and accepted at origin, and packaged per DLA guidelines with no special marking. The contract is issued under solicitation SPE7L1-26-T-881X, with a competition type of full and open, and references a comprehensive set of technical drawings, quality assurance protocols, and defense logistics directives.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDEREDThe contract pertains to the procurement of a SHAFT, SHOULDERED with NSN 3040-01-358-2525 and part number 33032-1111, supplied by KAWASAKI MOTORS MANUFACTURING CORP., for a total quantity of 10 units at a unit price of $10.00, resulting in a total contract value of $100.00. Delivery is required within 20 days from the contract award, FOB origin, with no tolerance for quantity variation—precisely 10 units must be delivered. Inspection and acceptance occur at the destination, specifically at the US Army SSA Bulgaria ASG facility located at Novo Selo Training Area Building 7000, Mokren 8994, Bulgaria. All items must comply with DLA Packaging Requirements for Procurement (RP001), be packaged per ASTM D3951, and marked and labeled according to MIL-STD-129, with palletization aligned to DLA standards. The DLA Master List of Technical and Quality Requirements overrides any conflicting specifications, and the use of Class I ozone-depleting chemicals is strictly prohibited unless specifically authorized by the specification. Packaging and shipping must follow DLA Procurement Notes C19 and C20, and the government’s required delivery date is May 20, 2026. The solicitation number is SPE7L3-26-T-134Y, issued by the Department of Defense’s Land Supplier Operations Vehicle Support, with Lee Miller as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
DISK, SOLID, PLAINThe contract pertains to the procurement of two solid plain disks with NSN 5340-01-005-1903 under solicitation SPE7L1-26-T-882P, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses are due by August 10, 2026. The item falls under NAICS code 332510, and the solicitation is governed by DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, accessible via the provided web link. All technical and quality specifications referenced by R or I numbers are incorporated by reference and must be strictly adhered to. Sampling and inspection protocols must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with the manufacturer allowed to choose attribute or variable inspection methods unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are deemed major. Acceptance criteria require zero non-conformances in the sample lot under MIL-STD-105/ASQ Z1.4 unless the contract specifies otherwise. Government identification must be removed from non-accepted supplies, and all provisions are subject to the revision of the DLA Master List in effect at the relevant solicitation or award date. Contact for inquiries is Michael Nordahl at dla.flbc2prs@dla.mil or 445-737-0596.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
NOZZLE, FUEL INJECTIONThe contract specifies the procurement of a fuel injection nozzle with part number 27910-10 and NSN 2910013183720, quantity of eight units, to be delivered within 20 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and unit containerization, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to the Assault Craft Unit 4 in Virginia Beach, Virginia, with explicit instructions to avoid parcel post and ship via the fastest traceable means. The required delivery date is July 10, 2026, with inspection and acceptance occurring at the destination. The contract includes detailed government-use identifiers, freight shipping information, and a point of contact for inquiries.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESSThe contract pertains to the procurement of one unit of a specific item identified by NSN 5340015750820 and part number AT364985 under solicitation SPE7L1-26-T-885S, with a required delivery within 20 days of award. The item must be delivered FOB origin with zero tolerance for quantity variance, inspected and accepted at the destination, and packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersedes ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 guidelines. If the item is classified as hazardous under FED-STD-313, it must be packed in accordance with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item must be shipped by traceable means, not parcel post, and delivered to the designated military facility at Camp Lejeune, NC, using the specified freight address and contact information. The required delivery date is July 24, 2026, and the contract includes government-only identifiers and logistics codes for internal tracking and distribution. All technical and quality specifications referenced in the DLA Master List are binding and take precedence over any standard commercial practices.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
LIFTING TOOL, HUB ANThe contract solicits 14 units of a Hub and Final Drive Lifting Tool with NSN 4910-01-127-2712, under solicitation number SPE7L1-26-Q-1382, with a required delivery deadline 320 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. The item must comply with DLA packaging requirements and严禁 the use of Class I ozone-depleting chemicals, requiring approval for any alternative substances unless explicitly permitted by specifications. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons anywhere, including U.S.-based subsidiaries or employees, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA export control training, and formal authorization from DLA. The place of performance is specified as Texarkana, Texas, 75507-5000, and the contracting officer is Adam Howell, reachable via email and phone provided. The NAICS code is 333310, and the solicitation was posted on July 28, 2026, with responses due by August 4, 2026.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThe contract pertains to the procurement of one unit of a plain seal identified by NSN 5330-01-584-9181 and purchase request number 7017465423, with a required delivery within 20 days to the destination APO AE 09321, FOB destination. Packaging must comply strictly with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The item is classified under the DoD unit of issue system, and packaging and palletization must adhere to DLA’s official packaging requirements referenced in RP001. The delivery is destined for the Royal Jordanian Air Force at Muwaffaq Salti Air Base in Jordan, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract includes detailed government-use codes and project identifiers, and full technical and quality specifications are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE7L1-26-T-885J, issued under a federal acquisition framework with a response deadline of August 10, 2026, and an original required delivery date of July 15, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
TAPPET, ENGINE POPPEThe contract is for the procurement of six TAPPET, ENGINE POPPE LIFTER, VALVE units with NSN 2815-00-450-9341 and part number 7S3161 supplied by CATERPILLAR INC. Each unit has a fixed price of $6.00, resulting in a total contract value of $36.00, with delivery required within five days of award at FOB origin. The items must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, adhering to the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging must follow RP001 guidelines, with palletization conforming to specified DLA requirements and no parcel post permitted for shipment. Deliveries are to be routed to the government facility at Fort Eustis, Virginia, with a required delivery date of July 27, 2026, and must be sent by the fastest traceable means. The contract enforces zero variance in quantity and mandates inspection and acceptance at destination. Government-specific identifiers and markings are required, and all supplies must be labeled and documented according to DLA protocols, including the use of the provided military freight address, mark for details, and tracking information. The solicitation number is SPE7L1-26-T-883V, issued under the Department of Defense’s Land Supply Chain, with procurement subject to federal acquisition regulations and technical directives.
Other Engine Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RINGThe contract is for one spacer ring identified by NSN 5365-15-120-2240 and part number 60154625 manufactured by IVECO DEFENCE VEHICLES S.P.A., classified as a commercial item under DoD procurement guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, and unit containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and acceptance requires zero non-conformances unless otherwise directed. Delivery is FOB origin within 20 days, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated military destination in Camp Lejeune, North Carolina. The contract is issued under solicitation SPE7L1-26-T-884G with a required delivery date of July 22, 2026, and ties to a purchase request number 7017607337 under a single unit of issue at a fixed price of $1.00. Government-specific data codes and shipping instructions are provided for logistics coordination, with procurement oversight by the Department of Defense’s Land Supply Chain through Katherine Woods as the point of contact.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336350
New
DIBBS
GEAR SUBASSEMBLY, SPThe contract pertains to the procurement of one gear subassembly with NSN 3010-01-570-7423 and part number A88245047, issued under solicitation SPE7L1-26-T-883Q by the Department of Defense’s Land Supply Chain. Delivery is required within five days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence. The item must be palletized per DLA packaging standards and shipped via traceable means, excluding parcel post, to the designated delivery point in Burlington, Kentucky. The unit of issue is each, with a total price of one unit at $1.00, and the required delivery date is July 29, 2026. All markings, labels, and documentation must follow specified government formatting guidelines, including the inclusion of the government procurement request number and designated shipping identifiers.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC STThe contract is for the procurement of 22 units of a nonmetallic strip seal with NSN 5330-01-183-7118, under solicitation SPE7L1-26-T-884U, issued by the Department of Defense’s Land Supply Chain. The item is classified as a commercial off-the-shelf product, and delivery is required within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Sampling and inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. The place of performance is Tinker AFB, OK, with Kristina Derry listed as the primary point of contact and the response deadline set for August 10, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
DIBBS
PARTS KIT, AIR-HYDRAThe contract is for a Parts Kit, Hydraulic Brake Slave Cylinder with NSN 2530-00-204-9906, quantity of 33 units, under Purchase Request 7017385501, with delivery required within 185 days after award. The solicitation number is SPE7L1-26-Q-1381, issued on July 28, 2026, with responses due by August 4, 2026. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent quality controls including tailored higher-level contract quality requirements, configuration change management via engineering change proposals and variance requests, and inspection and acceptance at origin. Export control regulations under ITAR or EAR apply to associated technical data, restricting its disclosure to foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to controlled data is limited to contractors approved by DLA who hold a valid US/Canada Joint Certification Program credential, have completed mandated training, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is Tracy, California, with the contracting office under the Department of Defense’s Land Supply Chain, and the primary point of contact is Adam Howell.
Motor Vehicle Brake System Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
CABLE AND CONDUIT AThe contract pertains to the procurement of one unit of a vehicular cable and conduit assembly identified by NSN 2530015596286 and part number 15300, supplied by SILVER EAGLE MANUFACTURING CO, under solicitation SPE7L1-26-T-885M. Delivery is required within 20 days from the award date with FOB origin terms, and no variance in quantity is permitted. The item must be packaged and preserved in strict compliance with MIL-STD-2073-1E and NEMA-WC26 standards, with marking governed by MIL-STD-129 and special preservation method ZZ as defined in SPE7L1-26-T-885M. The product is to be delivered to the designated government facility at 3920 KIRKWOOD HWY, WILMINGTON DE 19808-5194, with shipment required via the fastest traceable means and parcel post expressly prohibited. Inspection and acceptance occur at destination, and all packaging and shipping of hazardous materials must adhere to IP025 specifications. Preservation, packaging, and packing methods follow the technical requirements referenced in the DLA Master List of Technical and Quality Requirements. The contract includes precise government-only identifiers and logistical codes including TCN M2232061980033, RDD, and project code TP 2, with the original required delivery date set for July 23, 2026. Point of contact for procurement inquiries is Kristina Derry at DLA.
Other Motor Vehicle Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
O-RINGThis contract specifies the procurement of a single O-RING with National Stock Number 5331-01-670-1078 and part number 391 2882 499 from EATON CORP FLUID POWER OPNS, under solicitation SPE7L1-26-T-884B. The item must be delivered within five days of contract award, FOB origin, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-DTL-117, TYPE II, CLASS C, STYLE 1, requiring medium duty, waterproof, greaseproof, and opaque sealing to protect against ultraviolet degradation. Marking shall follow MIL-STD-129, including special instruction “20 -20 Do not bend,” and palletization must meet DLA packaging requirements. The supply is destined for Prince Sultan Air Base, Saudi Arabia, with freight logistics governed by DLAD PROC NOTES C19 and C20. Technical and quality requirements referenced via R and I numbers are defined in the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The unit of issue is each, and the purchase request number is 7017636739. The contract includes federal supply classification data and imposes hazardous materials shipping compliance under IP025. The original required delivery date is July 27, 2026, with a response deadline of August 10, 2026.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details