This Solicitation opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HUB, NETWORK

Closed

SPE8EN-26-T-3079Federal

Submission Closed09/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPRMM127QKA51

This solicitation, issued by DLA Mechanicsburg on October 29, 2026, is a Request for Quotation for the manufacture and delivery of four units of the SERVER, AUTOMATIC DA (NSN 7HH 7035-01-718-6394). The procurement is governed by the Lowest Price Technically Acceptable (LPTA) criteria, with award based on the lowest priced offer that meets all technical requirements and complies with the instructions in Section L. The delivery period is specified as 30 days with FOB Destination terms. Key technical requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD-2073 for preservation and packaging. The material must be new, unused, and completely free of metallic mercury contamination, as it is intended for use on submarines or surface ships. Inspection and acceptance will occur at the origin, specifically at the contractor's or subcontractor's plant. Contractors are required to maintain all inspection records for 365 days following final delivery. Administrative requirements mandate the use of PIEE-WAWF for the electronic submission of combined Invoice and Receiving Reports. Offerors who are not the original manufacturer must provide the Original Equipment Manufacturer's name, CAGE code, and part number. Additionally, the contract requires CMMC Level 1 self-certification and compliance with various FAR and DFARS clauses, including the Buy American program and cybersecurity safeguarding requirements.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

ALIGNMENT TOOL,ELEC — 5120013977998 — SPRPA127QYA31

Solicitation # SPRPA127QYA31

Solicitation SPRPA127QYA31, issued by the Department of the Navy via DLA Aviation at Philadelphia, is for the procurement of one newly manufactured Electrical Alignment Tool, identified by NSN 5120-01-397-7998. The government will make a single award to a government-approved source that is determined to be technically acceptable and most advantageous, with past performance weighted as more important than price. Only newly manufactured spares are acceptable; refurbished, remanufactured, or repaired materials are strictly prohibited. Offerors must submit quotes via email to the designated point of contact, and distributors must provide an authorized distributor letter on the source's letterhead. The contract mandates strict adherence to quality and packaging standards, including compliance with ISO 9001 or SAE AS9100 quality management systems and calibration standards such as NCSL Z540.3 or ISO 10012. Packaging must follow MIL-STD-2073 and MIL-STD-147, with marking compliant with MIL-STD-129 and Unique Item Identifier requirements per ISO/IEC 16022. Inspection and acceptance will occur at the origin. Administrative requirements include reporting end items through Wide Area WorkFlow and adhering to DFARS clauses regarding critical safety items, safeguarding covered defense information, and the Buy American program.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

INDICATOR, FAULT LOCATI

Solicitation # SPE7M1-27-U-0960

Solicitation SPE7M1-27-U-0960 is a small business set-aside issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain for the acquisition of five fault locating indicators, identified by NSN 6625012723597. This procurement is structured as an Indefinite Delivery Contract under the First Destination Transportation program, with delivery required within 384 days after order. The items are designated as critical application items, with specific part numbers associated with Symetrics Industries and Lockheed Martin Corporation. Shipping is established as FOB Origin, while both inspection and acceptance will occur at the destination within the continental United States. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 for non-hazardous commercial packaging. Hazardous materials must comply with FED-STD-313 and TQ requirement IP025, and all packaging must be marked according to MIL-STD-129 and RP001. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including cybersecurity reporting under 252.204-7012 and prohibitions on certain telecommunications equipment. Evaluation for award is based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1752

This procurement, issued by the DLA Weapons Support Maritime Supply Chain under solicitation SPE7M1-27-T-1752, is for the acquisition of one Regulation and Relief Valve, identified by NSN 6625-01-581-5369. The item is to be delivered FOB Origin to the Naval Air Warfare Center Air Division in Patuxent River, Maryland, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after order. Shipping must be conducted via traceable means, and parcel post is strictly prohibited. Inspection and acceptance will take place at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to environmental and material standards, prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various federal regulations, including the Buy American Act, NIST SP 800-171 for cybersecurity, and DFARS requirements regarding covered defense telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1744

Solicitation SPE7M1-27-T-1744 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of nine instrument shunts, identified by NSN 6625-01-492-7560. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery timeline is 97 days after receipt of order, with a need ship date of September 3, 2024, and an original required delivery date of September 14, 2024. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements, including DLA packaging requirements (RP001), MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking. Specific restrictions are in place prohibiting the intentional addition of mercury and the use of additive manufacturing processes unless explicitly authorized. Offerors must comply with the Buy American Act, the Berry Amendment, and other domestic material restrictions. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and all quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Accelerometer Part Number 631M24This subcontract involves the procurement and delivery of accelerometer part number 631M24 to support prime contractors operating at the Puget Sound Naval Shipyard and Intermediate Maintenance Facility. The selected provider is responsible for sourcing and delivering the physical hardware components in strict accordance with the original manufacturer specifications. Managed under the Department of Defense for the Puget Sound Naval Shipyard IMF, the work will be performed in Bremerton, Washington. The opportunity is categorized under NAICS code 334515, with a response deadline set for November 6, 2026.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

High-Speed COTS Lock-In Amplifier with Oscilloscope CapabilityThis subcontract, issued by the Department of Defense under the Air Force Life Cycle Management Center, seeks the procurement of one commercial off-the-shelf high-speed lock-in amplifier with oscilloscope capability. The required device must support DC to 600 MHz demodulation and sampling rates between 1 and 25 GSa/s to facilitate quantum optics experiments. The delivery includes the hardware unit along with a PC software interface, API documentation, and compatibility with Python or MATLAB. Performance will take place at Wright Patterson AFB. To be eligible for the award, contractors must maintain an active SAM registration and have completed a CMMC Level 1 assessment. Responses to this solicitation are due by November 11, 2026.

POSTED

DEADLINE

CMC 500 Essential package

Solicitation # PR504231

Oak Ridge National Laboratory, managed by UT-Battelle, LLC for the Department of Energy, is soliciting firm fixed price quotes for the procurement of two CMC 500 Essential packages and associated components from Omicron Electronics Corporation. The required equipment includes software modules for overcurrent, differential, and pulse ramping, wiring accessory packages, wireless adapters with antennas, transport cases, and three-phase generator cables. This is a combined procurement under NAICS code 334515, and the award will be granted to the lowest priced, technically acceptable proposal. To be eligible, the seller must be an authorized reseller of the products. Proposals are due by November 4, 2026, at 5:00 PM EST and must be submitted via email to the procurement officer. The submission must include a firm fixed price quote, a proposed delivery schedule, and completed abbreviated representations and certifications. The contract incorporates various Federal Acquisition Regulation clauses, including Brand Name or Equal and the Buy American Act. Compliance with cybersecurity standards derived from DOE OERL 205 I D and NIST SP 800-161 is required. Additionally, any personnel delivering items to the Oak Ridge, Tennessee site must be United States citizens or foreign nationals registered in the Foreign Access Central Tracking System.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

4 Series Mixed Signal Oscilloscope (MSO44B)

Solicitation # 80NSSC27941006Q

NASA/NSSC is seeking capability statements for the acquisition of a Tektronix MSO44B 4 Series Mixed Signal Oscilloscope and associated accessories to support embedded hardware bring-up, board-level debug, and signal integrity analysis at the NASA Ames Research Center in California. The required equipment must feature four analog input channels, 1 GHz bandwidth, a minimum record length of 31.25 M points per channel, and a perpetual, node-locked ultimate software bundle for advanced analysis. Additional requirements include an 8-channel logic probe, various specialized voltage and current probes using a common interface, a hard transit case, and a five-year calibration service with traceable certification. The government intends to issue a sole source contract to Tektronix under FAR 12.102(a), as they have been determined to be the sole provider of this specific oscilloscope. This procurement is being conducted as an acquisition of commercial items under FAR Part 12, and NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman is applicable. Interested vendors must submit written capability statements by October 30, 2026, referencing the notice ID. These statements will be used solely to determine if the procurement will be conducted on a competitive basis; formal quotes will not be evaluated at this stage.

National Aeronautics And Space Administration

POSTED

DEADLINE

UH-60L/M Operational Test Program Sets

Solicitation # W912LA27QA002

The California Army National Guard Medical Readiness Detachment is issuing a Sources Sought notice under solicitation number W912LA27QA002 to identify potential vendors capable of providing Military UH-60L/M Black Hawk specific Operational Test Program Sets. This action is a request for information and not a formal solicitation. The primary objective is to procure equipment to test various aircraft electrical components and systems, which is critical for ensuring flight safety and maximizing aircraft readiness. The required items include four specific test program sets: P/N 991-000-00139-02 for Right-Hand Relay Panels, P/N 991-OTP-00014-02 for Blade De-Ice Distributors, P/N 991-OTP-00119-01 for BDI system control panels, and P/N 991-OTP-00120-01 for Left-Hand relay panels. Each set must include test program software on CD-ROM, test adapter cables in storage bags within rugged cases, and applicable test interface assemblies. The place of delivery for these items is 5168 E Dakota Ave, Fresno, California. Interested sources must submit their response, including vendor name, business size, unique entity ID, and a capability statement, to Mr. Manuel Jimenez via email by November 10, 2026. The procurement falls under NAICS code 334515 and currently has no designated set-aside. Because this is a market research effort, specific evaluation factors, contract values, and formal award criteria have not yet been established.

W7MX Uspfo Activity Ca Arng

POSTED

DEADLINE

AFIT Lock in Amplifier

Solicitation # FA860127Q0010

Solicitation FA860127Q0010 is a combined synopsis and request for quotation for the procurement of one commercial off-the-shelf lock-in amplifier to support research at the Air Force Institute of Technology. The device must feature demodulation capabilities for DC up to 600 MHz or higher reference signals, a minimum input data sampling rate of 1-25 GSa/s, and integrated oscilloscope capability. The contract is a firm fixed price award with a delivery requirement of 60 days after receipt of order to Wright Patterson AFB, Ohio. A one year warranty from the date of acceptance is required. The award will be made based on the Lowest Price Technically Acceptable (LPTA) basis to the lowest priced offeror that is technically acceptable and conforms to all solicitation requirements. Offerors must be registered in the System for Award Management (SAM) and meet the mandatory minimum requirement of a CMMC Level 1 assessment. Quotes are due by November 11, 2026, at 4:00 PM EST and must be submitted electronically to the designated contract specialist and contracting officer. Submissions must include a completed Required Information Sheet and a detailed description of the supply to be considered.

POSTED

DEADLINE

Solicitation # N4523A-27-Q-4002

The Naval Sea Systems Command Contracting Department intends to procure Accelerometer Part Number 631M24 for the Puget Sound Naval Shipyard and Intermediate Maintenance Facility located in Bremerton, Washington. This requirement, identified by solicitation number N4523A-27-Q-4002, is intended to be awarded on a sole source basis to PCB Piezotronics under FAR 6.302. The procurement will be conducted as a commercial, firm fixed-price supply contract following the acquisition procedures for commercial services outlined in FAR Part 12. The solicitation is scheduled to be posted to sam.gov on or about November 2, 2026, with a response deadline of November 6, 2026. While the government intends to sole source this requirement, interested parties may submit proposals to demonstrate their capability, which the government will use to determine if a competitive procurement is necessary. This action falls under NAICS code 334515 and is managed by the Department of Defense.

Puget Sound Naval Shipyard IMF

POSTED

1 day ago

DEADLINE

in 8 days

AI Contract Overview

Solicitation SPE8EN-26-T-3079 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of three network hubs, identified by NSN 7035016278718. The requirement falls under NAICS 334515 and is managed by the Construction and Equipment T & IFO EQ office. The delivery period is specified as 167 days after order, with an original required delivery date of December 1, 2026, and a need ship date of March 1, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract incorporates stringent technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129, and palletization must adhere to RP001. Special prohibitions are in place regarding the intentional addition of mercury and the use of additive manufacturing unless specifically authorized. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

General Info

DoD buys three Teledyne FLIR network hubs for delivery by December 1, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

SPE8EN-26-T-3079 Request for Quotations

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 2

Solicitation

Response DeadlineSep 14

Deadline has passed

Submission Closed

09/14/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

Office AddressUSA

Contacts

Jennifer Esworthy

contact@example.gov

+1 (555) 000-0000

Full Description

HUB,NETWORK
HUB, NETWORK
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TELEDYNE FLIR DEFENSE, LLC 4ZCA0 P/N 101082
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018160541 0001 EA 3.000
NSN/MATERIAL:7035016278718
SPE8EN-26-T-3079
SECTION B
PR: 7018160541 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/01/2027 Original Required Delivery Date:12/01/2026
SPE8EN-26-T-3079 NSN/Part Number: 7035-01-627-8718 Quantity: 3 EA Purchase Request: 7018160541QTY: 3 Delivery: 167 days ADO