Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from North Carolina was posted on April 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

HUB Participation and Small Business Subcontracting

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312
New
ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)
Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf
Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.
Parsons Corporation

POSTED

about 7 hours ago

DEADLINE

in 4 days
NAICS: 332312
New
DIBBS
Marine Metal Door Manufacturer/SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the fabrication or procurement of seven marine-grade metal doors, identified as NSN 2040014437111. The supplier must utilize corrosion-resistant materials and ensure all units strictly adhere to MIL-STD-129 military marking standards and domestic material restrictions. The final products are to be packaged for FOB Origin shipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312, with performance taking place in New Cumberland. Interested parties must submit their responses by November 9, 2026. This contract serves prime contractors who are fulfilling broader DLA supply obligations.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Ballistic and Critical Welding for M88E1 Hatch Door
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Manufacturing of Mending Plates (NSN 5340-01-732-9372)This subcontract, issued by the DLA Weapons Support Land Supply Chain, requires the manufacture of 84 precision mending plates under NSN 5340-01-732-9372. The contractor must fabricate the units according to RBC Transport Dynamics Corp part number 180004 specifications and DLA technical requirements. All production must utilize Berry Amendment compliant materials and processes free of ozone-depleting chemicals. Deliverables must be packaged in accordance with MIL-STD-129 and ASTM D3951 standards. The opportunity is a total small business set-aside under NAICS code 332312, with performance located in New Cumberland. To be eligible, the contractor must provide a CMMC Level 2 self-assessment and obtain engineering source approval. The response deadline for this requirement is November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Fabrication of Side Rail Assembly, Soft Top (Left Hand)
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

in 15 days
NAICS: 332312
New
DIBBS
Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
Manufacturing of Vehicular Joint Companion Flanges (NSN 2520-21-879-0986)
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

in 15 days
NAICS: 332312
New
DIBBS
Supply of Vehicular Component Brackets (NSN 2590016091130)This subcontract involves the manufacture or sourcing of 30 specialized vehicular component brackets for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The components must strictly adhere to Part Piece Number 12504326-010 and NSN 2590016091130 as specified in the technical drawings. Performance will take place in Tracy, California, under NAICS code 332312. Critical compliance mandates include strict adherence to Berry Amendment domestic sourcing requirements to ensure materials are produced within the United States. Additionally, the use of additive manufacturing is prohibited unless explicit authorization is granted. The response deadline for this requirement is November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Fabrication of Small Arms Storage Racks
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Precision Tube Fabrication (NSN 1730-01-303-9285)This subcontract, issued by the Department of Defense under a Service-Disabled Veteran-Owned Small Business set-aside, requires the fabrication of 15 structural dolly tubes. The work must be performed in New Cumberland and adhere strictly to NSN 1730-01-303-9285 and MIL-STD-100G technical specifications. The contractor is expected to utilize precision tube cutting, bending, and welding equipment to deliver the completed units for prime contractors on DLA supply contracts. Compliance and security are critical components of this agreement. The selected provider must maintain CMMC Level 2 certification and ensure full adherence to DFARS 252.204-7012 as well as ITAR and EAR regulations. Interested parties must respond by November 9, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Supplier of Structural Channels (NSN 9540-01-474-4371)This subcontract involves the supply of structural channels to prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals contracts. The selected supplier is responsible for manufacturing or sourcing materials that strictly adhere to the technical specifications of NSN 9540-01-474-4371. The scope of work includes rigorous quality control and palletization processes conducted in accordance with RP001 DLA Packaging Requirements for Procurement. The supplier is tasked with the final delivery of these palletized structural channels to a designated destination, with performance centered in the 10567-5000 zip code area.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
Supply of Internal Wrenching Bolts (NSN 5306015955093)This subcontract involves the supply of 13 specialized internal wrenching bolts meeting NSN 5306015955093 specifications for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing these components without the use of additive manufacturing, ensuring strict adherence to the domestic material restrictions mandated by the Berry Amendment and the Buy American Act. The project falls under NAICS code 332312 and is managed by the Department of Defense. Performance for this contract is designated for New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 4, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The North Carolina Department of Transportation is seeking HUB-certified firms, including Disadvantaged Business Enterprises, Minority Business Enterprises, and Women Business Enterprises, for subcontracting opportunities. Eligible participants may provide services in fabrication, coating, or logistics, provided they have obtained prior state approval. Interested parties must submit their responses by April 28, 2026. This opportunity falls under NAICS code 332312 and is specifically designed to increase small business and HUB participation within state transportation projects.

General Info

Agency

North Carolina → Department of Transportation

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 54-DM-33513.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Invitation for Bid #: 54-DM-33513

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNorth Carolina → Department of Transportation
ContactsNo contacts available
OfficeN/A
Organization / AgencyNorth Carolina → Department of Transportation
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Opportunity for HUB-certified firms (DBE, MBE, WBE) to participate in fabrication, coating, or logistics with prior state approval.

More opportunities from North Carolina → Department of Transportation

Same awarding agency

NAICS: 562111
SLED
Litter and Debris Removal ServicesThis subcontract for Litter and Debris Removal Services involves the pickup, removal, and recycling of non-organic trash for prime contractors working on North Carolina Department of Transportation Division 9 projects. The scope of work requires the collection of debris from fence line to fence line, including medians and ramps, ensuring that all right-of-way areas are left free of accumulated litter. All materials must be disposed of in state-approved landfills and single-stream recycling facilities. To be eligible, contractors must be NCDOT pre-qualified and strictly adhere to the January 2024 Standard Specifications for Roads and Structures. The solicitation was posted on October 21, 2026, with a response deadline of November 18, 2026. This opportunity falls under NAICS code 562111 and is managed by the North Carolina Department of Transportation.
Solid Waste Collection

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 561730
SLED
Routine and Cleanup Mowing ServicesThis subcontract for Routine and Cleanup Mowing Services involves performing vegetation mowing for prime contractors on NCDOT Division 9 projects located within Davie, Forsyth, and Stokes Counties. The scope of work includes mowing right-of-way lines, interchanges, and sight distance areas to a height of 6 inches. All work must be completed using commercial mowing and trimming equipment in accordance with NCDOT typical sections and the January 2024 Standard Specifications for Roads and Structures. Eligible contractors must be NCDOT pre-qualified to deliver mown vegetation across designated shoulder miles and acres. The solicitation was posted on October 21, 2026, with a response deadline of November 18, 2026. This opportunity falls under NAICS code 561730 and is managed by the North Carolina Department of Transportation.
Landscaping Services

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 562111
SLED
Roadside Litter and Debris Removal ServicesThis subcontract opportunity with the North Carolina Department of Transportation involves providing roadside litter and debris removal services for prime contractors. The selected provider will be responsible for the continuous collection of litter and the removal of trash bags from the right-of-way using appropriate hauling vehicles and collection tools to ensure roadways are left clean and free of debris. The project falls under NAICS code 562111 and requires the contractor to coordinate all completion notifications directly with the prime contractor. Interested parties must submit their responses by the deadline of November 18, 2026.
Solid Waste Collection

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 561990
SLED
Traffic Control and Signage ProviderThis subcontract opportunity with the North Carolina Department of Transportation seeks a provider to implement traffic control devices and signage for prime contractors. The scope of work includes the deployment of portable work zone sign stands and the installation of W10-10A signage specifically for litter pickup and mowing operations. The ultimate goal is the delivery of a fully deployed traffic control zone that meets all safety and operational requirements. To be eligible, the provider must be traffic qualified by the NCDOT Traffic Control Section and ensure strict compliance with SSRS 1089, SSRS 1110, and RSD1110 specifications. Interested parties must submit their responses by November 18, 2026.
All Other Support Services

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 561730
SLED
Roadside and Median Mowing SubcontractorThis subcontract opportunity is for a qualified provider to perform routine and cleanup mowing of vegetation for prime contractors on North Carolina Department of Transportation projects located in Surry and Yadkin Counties. The scope of work includes executing routine mowing using the Swath typical section, median mowing, and cleanup mowing extending to the right-of-way or tree line. All vegetation must be maintained according to specific NCDOT height and pattern specifications. Eligible candidates must be pre-qualified under NCDOT work codes for mowing and possess commercial mowing equipment capable of performing Swath patterns. Interested parties should note that the response deadline for this solicitation is November 18, 2026.
Landscaping Services

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 339999
SLED
Mower Equipment and Safety Signage SupplyThis subcontract for the North Carolina Department of Transportation involves the supply of specialized machinery and certified safety signage for prime contractors working on highway maintenance projects. The scope of work includes providing W10-10A signs and stands that adhere to NCHRP Report 350 Category II and SSRS1089 material specifications, as well as tractors and mowers capable of performing swath and ditch patterns. The contractor is responsible for the delivery of all certified equipment and materials directly to the project site. This opportunity was posted on October 21, 2026, with a response deadline of November 18, 2026, and is categorized under NAICS code 339999.
All Other Miscellaneous Manufacturing

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 561990
SLED
Highway Work Zone Traffic ControlThis subcontract opportunity with the North Carolina Department of Transportation focuses on providing temporary traffic control and signage for prime contractors working on highway projects. The selected provider will be responsible for the installation and removal of W10-10A signs and portable stands that adhere to NCHRP Report 350 Category II standards. To ensure the safety of both motorists and crews, the contractor must deploy qualified work zone installers to establish compliant environments according to NCDOT specifications. The solicitation is listed under NAICS code 561990 and was posted on October 21, 2026. Interested parties must submit their responses by the deadline of November 18, 2026. This contract is designed to ensure that all highway work zones are managed safely and meet all necessary regulatory requirements for state transportation projects.
All Other Support Services

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 561730
SLED
Highway Shoulder and Median MowingThis subcontract for Highway Shoulder and Median Mowing involves providing routine and cleanup mowing services for prime contractors on NCDOT highway projects located in Alleghany County, North Carolina. The scope of work includes executing swath typical section mowing, cleanup mowing extending to the right-of-way or tree line, and slope mowing on cut sections flatter than 2:1. All work must be performed using tractors and mowers that adhere to SSRS1110 and RSD1110 specifications to ensure highway shoulders and medians are delivered according to specified patterns. Managed by the North Carolina Department of Transportation under NAICS code 561730, the solicitation was posted on October 21, 2026. Interested parties must submit their responses by the deadline of November 18, 2026.
Landscaping Services

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 561990
SLED
Traffic Control Device (TCD) Installation and ManagementThis subcontract agreement focuses on the installation and management of Traffic Control Devices for prime contractors operating on North Carolina Department of Transportation District 1 projects. The scope of work involves deploying essential safety equipment, including Truck Mounted Attenuators, cones, signage, and safety barriers, specifically within narrow medians and areas adjacent to median guardrails to ensure the protection of maintenance crews. All operations must strictly adhere to MUTCD standards to maintain safe work zones. Interested parties should note that the solicitation was posted on October 21, 2026, with a response deadline of November 18, 2026. The project falls under NAICS code 561990 and is managed by the North Carolina Department of Transportation.
All Other Support Services

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 562111
SLED
Roadside Litter and Debris RemovalThis subcontract opportunity with the North Carolina Department of Transportation involves the removal of trash, litter, and debris for prime contractors operating on NCDOT District 1 projects. The selected provider will be responsible for general and on-call debris removal from roadways and right-of-way areas, utilizing litter pickup trucks and waste disposal containers to ensure all roadside areas are left debris-free. All work must be performed in strict adherence to NCDOT Standard Specifications. The solicitation is categorized under NAICS code 562111 and was posted on October 21, 2026. Interested parties must submit their responses by the deadline of November 18, 2026.
Solid Waste Collection

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 561730
SLED
Specialized Vegetation RemovalThis subcontract for Specialized Vegetation Removal involves performing targeted clearing services for prime contractors on North Carolina Department of Transportation District 1 projects. The scope of work focuses on removing vegetation from stationary road assets, such as guardrails and signs, as well as providing on-call clearing services. All work must be executed using brush cutters, chainsaws, and other specialized equipment in strict accordance with NCDOT Standard Specifications. The opportunity is categorized under NAICS code 561730 and was posted on October 21, 2026. Interested parties must submit their responses by the deadline of November 18, 2026. The contract ensures that road assets and designated areas are kept clear of obstructive vegetation to maintain safety and visibility within the specified district.
Landscaping Services

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 561730
SLED
Roadside Mowing and CleanupThis subcontract for the North Carolina Department of Transportation involves providing roadside mowing and cleanup services for prime contractors operating within District 1. The scope of work encompasses the maintenance of Interstate right-of-ways, as well as primary divided and undivided roads and secondary paved and unpaved roads. To ensure proper execution, the contractor must utilize commercial mowing equipment and specialized slope mowers for embankments while delivering results based on specified quantities. Strict adherence to safety standards is required, specifically compliance with NCDOT SSRS and MUTCD regulations for traffic safety. Interested parties should note that the solicitation was posted on October 21, 2026, with a response deadline of November 18, 2026. The project falls under NAICS code 561730 for landscaping services.
Landscaping Services

POSTED

7 days ago

DEADLINE

in 21 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332312
Closed
SLED
Fabrication of Structural Steel Beams
Department of Transportation

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 332312
Closed
SLED
Structural Steel Fabrication and Erection
Greenville-Spartanburg Airport District

POSTED

7 months ago

CLOSED

5 months ago
View Details
NAICS: 332312
Closed
SLED
Structural Steel Fabrication and Delivery
BRAZORIA COUNTY

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 332312
Closed
SLED
Hydraulic Bucket Attachment Supply
Fiscal/administration

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 332312
Closed
SLED
Playground Structural Steel Fabrication and Installation
St. Tammany Parish Government

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 332312
Closed
SLED
Fastener and Hardware Supply (ASTM A153-Coated)
Columbus State Community College

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 332312
SLED
Galvanized Steel Cleat and Hardware Supply
Office of Land Management

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 332312
Closed
SLED
Metal Building Supply (Prefabricated Kit)
Habersham County Board of Commissioners

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 332312
Closed
SLED
Reinforcing Steel (Rebar) Installation
West Virginia Department of Transportation

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 332312
Closed
SLED
Steel H-Pile Supply
West Virginia Department of Transportation

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 332312
Closed
SLED
Material Supply – Steel Studs and Tracks with Markings
California Military Department

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 332312
Closed
SLED
Bollard Supply and Installation
State of Rhode Island

POSTED

7 months ago

CLOSED

6 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS