This Government Contract opportunity from Texas was posted on August 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Hybrid Bus Inspection Services

Closed

816199State & Local

Submission Closed09/11/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material (ACM) floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet. All work must be performed by contractors possessing all required State of Illinois licenses and certifications, utilizing accredited laboratories, and adhering to federal, state, OSHA, and EPA regulations. The award will be based on best value, with submissions due by 3:00 PM CT on October 21, 2026. Required documentation includes a completed bid sheet, a supplier packet containing a W-9 and self-certification form, proof of insurance, and three references for projects of similar scope. Subcontractors must acquire a Unique Entity Identification number (UEI) and comply with Service Contract Labor Standards, specifically Wage Determination SCA 2015-5019 Rev 31. The contract incorporates various FAR clauses regarding small business utilization, equal opportunity, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis to MTC.

POSTED

DEADLINE

First Article Testing (FAT) and Quality ComplianceThis subcontract, titled First Article Testing (FAT) and Quality Compliance, involves providing technical testing and reporting services for prime contractors under DLA supply contracts. The scope of work requires the testing of five initial Objective Flip Cover units to ensure full compliance with DLA Master List specifications and source-controlled drawings. These evaluations must be conducted using specialized testing equipment to verify quality and technical standards. The primary deliverable is a formal First Article Test report, which must be generated and submitted within 90 days of the contract award. This project is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located in New Cumberland.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, focuses on First Article Testing and Quality Validation. The selected provider will perform critical quality assurance services for prime contractors on DLA supply contracts, specifically conducting dimensional inspections via CMM metrology and material verification within testing laboratories. Additional responsibilities include the verification of manufacturing process sheets and the provision of quality assurance surveillance for sub-venders. To ensure compliance with aerospace industry requirements, the contractor must adhere to AS9100 or equivalent quality standards. The primary deliverables for this engagement are the First Article Testing Report and a comprehensive Quality Certification package. Performance for this contract is centered at Tinker AFB, and the response deadline for the solicitation is October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test services supports prime contractors under the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The scope of work involves performing First Article Testing to validate initial production units, ensuring they meet strict dimensional requirements of 0.170 thickness, 0.380 height, and 0.435 width. Additionally, the contractor must verify material integrity to ensure no splicing or gluing has occurred, utilizing precision measurement tools and material analysis equipment to confirm compliance. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. The primary deliverables include a comprehensive First Article Test report and a formal certification confirming that all units adhere to the Statement of Work. Interested parties should note the response deadline of October 29, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Quality Inspection and Sampling Services for Critical Aerospace ComponentsThis subcontract for Quality Inspection and Sampling Services for Critical Aerospace Components supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for performing zero-based sampling and quality inspections for prime contractors on aerospace procurements, specifically focusing on turbine engine components. The scope of work includes executing sampling plans according to MIL-STD-1916 or ASQ H1331 to ensure part authenticity and strict compliance with Boeing specifications for critical application items. The service provider will utilize precision measurement tools to verify components and is required to deliver detailed inspection reports and sampling certifications. Performance for this contract takes place in New Cumberland, Pennsylvania. The solicitation was posted on October 18, 2026, with a response deadline of October 26, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

First Article Testing and Validation for Electrical AssembliesThis subcontract involves performing specialized first article testing and validation for electrical assemblies on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work focuses on executing validation tests for NSN 5995-01-676-1147 in accordance with RT001 standards and specific technical data. The selected provider must coordinate closely with Government Quality Assurance Representatives for in-process verification and is required to deliver a formal written First Article Test Report upon completion. To be eligible, contractors must hold JCP certification for handling ITAR and EAR data and maintain certification in either SAE AS9003 or ISO 9001. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties must submit their responses by October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Test (FAT) EvaluationThis subcontract, issued by the Department of Defense via Depot Hill, requires the performance of First Article Testing for a solenoid valve with NSN 4810-01-044-9244. The selected contractor will utilize laboratory equipment to verify the performance and tolerances of the first production unit, ensuring it meets all necessary specifications. This process involves close coordination with the Engineering Support Activity for final approval and culminates in the delivery of a validated sample unit and a comprehensive FAT report. The project is based at Hill AFB and falls under NAICS code 541380. Due to the handling of Controlled Unclassified Information, the contractor must maintain CMMC Level 2 certification. Interested parties must respond by October 29, 2026.

POSTED

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The selected provider will perform quality conformance validation for prime contractors on Defense Logistics Agency supply contracts, specifically focusing on the execution of Production Lot Tests. This work involves using electrical testing equipment, such as signal analyzers and multimeters, to verify NSN part number accuracy, signal integrity, and serial cable continuity in accordance with established DLA quality assurance standards. The scope of work culminates in the delivery of a formal certification of quality conformance or a detailed test report. Performance for this contract is located in Tracy, California, under NAICS code 541380. Interested parties must note the response deadline of October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electrical Component Testing and Certification ServicesThis subcontract for Electrical Component Testing and Certification Services involves performing First Article Testing for prime contractors supporting DLA supply contracts for NSN 016761127. The scope of work requires the testing of two initial production units using signal generators, continuity testers, and multimeters to ensure full performance verification against Engineering Support Activity standards. All technical data handling must strictly comply with DFARS 252.204-7012 regulations. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. The selected provider is required to deliver a formal First Article Test Report within 30 calendar days of testing. This opportunity falls under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing and Quality Assurance ServicesThis subcontract for the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division involves providing First Article Testing and Quality Assurance Services. The selected contractor will perform testing on one unit of NSN 6150006130108 using certified M&TE and sampling plans in accordance with MIL-STD-1916, ASO H1331, or MIL-STD-105/ASQ Z1.4. The primary deliverables for this project are a comprehensive First Article Test Report and one validated test unit. To be eligible, contractors must maintain ISO 9001:2015 and CMMC Level 2 certifications. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties must submit their responses by October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test (FAT) Services supports prime contractors on DLA Weapons Support supply contracts. The selected provider will execute testing under CLIN 0002, utilizing specialized measurement equipment to validate that electrical and physical specifications align with government requirements. A critical component of the scope involves coordinating evaluations with the Engineering Support Activity to ensure compliance, ultimately delivering a formal FAT Report and an approved first article unit. The performance of this contract will take place at Tinker AFB. To be eligible, contractors must maintain ISO 9001 or SAE AS9003 certification. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

First Article Test (FAT) and Shock Extension ReportingThis subcontract, issued by the Department of Defense DLA Weapons Support Active Devices Division, focuses on technical validation and testing for prime contractors delivering DLA supply contracts. The scope of work includes executing Contractor First Article Tests, generating shock extension reporting in accordance with MIL-S-901, and ensuring all manufacturing documentation complies with MIL-T-31000. Key deliverables for the project consist of the FAT Report, the Shock Extension Report, and certified documentation. To qualify, contractors must possess specialized shock testing facilities and RF testing equipment, as well as CMMC Level 2 cybersecurity certification. This opportunity is a total small business set-aside under NAICS code 541380, with performance located in New Cumberland. Interested parties must submit their responses by October 29, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 10 days

AI Contract Overview

The Capital Metropolitan Transportation Authority (CapMetro) is soliciting bids for IFB 816199 to obtain Hybrid Bus Inspection Services for its Gillig hybrid bus build. The selected contractor will provide a team of qualified personnel, including a Resident Inspector, to perform in-plant quality assurance, vehicle build documentation, reporting, and meeting participation. These services are primarily performed on-site at the Gillig manufacturing facility in Livermore, California, for the FY27 and FY29 procurements, with the FY30 location to be determined. The goal is to ensure all vehicles are delivered defect-free, compliant with specifications, and ready for revenue service. Personnel must possess expertise in vehicle production and high-energy electrical storage systems, with a thorough understanding of FMVSS, EPA, FTA, ADA, and specific 49 CFR regulations. This is a firm-fixed-price contract with a total term of five years from the Notice to Proceed. The scope includes a base period for FY27 and two optional periods for FY29 and FY30, with an estimated quantity of 37 buses per period. Award will be granted to the lowest responsive and responsible bidder based on the total pricing submitted in the pricing schedule. Bidders must submit their proposals electronically via PlanetBids by September 11, 2026. The contract requires strict adherence to organizational conflict of interest rules, the Texas Prompt Payment Act for invoicing, and comprehensive insurance coverage, including workers' compensation for all employees.

General Info

CapMetro seeks professional hybrid bus inspection services for Gillig buses by September 11, 2026.

Agency

Texas → Procurement Department of Capital Metropolitan Transportation Authority

NAICS

541380 - Testing Laboratories and Services

Place of Performance

2910 East 5th Street 3rd Floor Austin, Texas 78702, TX, USA

Set-Aside

NONE

Documents

Exhibit B Representations and Certifications for Local Contracts

representations-and-certifications

High

IFB 816199 Hybrid Bus Inspection Services

ifb

High

IFB 816199 Pricing Schedule Exhibit A

pricing-schedule

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 11

Contract opportunity posted

Response DeadlineSep 11

Deadline has passed

Submission Closed

09/11/2026, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas → Procurement Department of Capital Metropolitan Transportation Authority

Contacts1 person available

OfficeTX, USA

Organization / AgencyTexas → Procurement Department of Capital Metropolitan Transportation Authority

Office AddressTX, USA

Contacts

Deborah KnutsonContact

contact@example.gov

+1 (555) 000-0000

Full Description

Scope: CapMetro will be issuing a solicitation package complete with the purchase description, contract terms, and instructions for IFB 816199 Hybrid Bus Inspection Services. CapMetro seeks bids from qualified and experienced firms to provide vehicle build documentation, reporting, meeting participation, and in-plant quality assurance services for CapMetro’s Gillig hybrid bus build.
Contractor shall provide a team of experienced and qualified personnel to perform the services described herein. Personnel qualifications shall include expertise in vehicle maintenance, vehicle production, manufacturing processes, high-energy electrical storage systems, and components associated with hybrid vehicles, battery electric propulsion systems, and production-line bus inspections. Personnel shall also possess a thorough understanding of the requirements set forth in: • Federal Motor Vehicle Safety Standards (FMVSS) • Environmental Protection Agency (EPA) • 49 Code of Federal Regulations (CFR) • 49 CFR Part 663.37 Pre-Award and Post-Delivery Audits of Rolling Stock Purchase • 49 CFR 665 Bus Testing, • 49 CFR Part 38, Accessibility Requirements for Transportation Vehicles
Bid Bond: 0.00%

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS