Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HYD PWR CNTRL ASY — 1680015700298 — SPRPA126QZC08

Active
SPRPA126QZC08

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of the Navy via DLA Aviation at Philadelphia, concerns the procurement of a Hydraulic Power Control Assembly. The material is designated as Critical because it is used in shipboard systems for aircraft launch and recovery, where failure could lead to serious personnel injury, loss of life, or loss of vital aircraft and shipboard systems. Consequently, special control procedures are required to ensure the receipt of correct material. The contractor is responsible for manufacturing, testing, and inspecting articles according to the NAWCAD LKE drawing package and specified drawing numbers. All necessary manufacturing aids, including fixtures, jigs, and test equipment, are the sole responsibility of the contractor. Compliance with IPC/EIAJ-STD-001C is expected if MIL-STD-454 is referenced, and packaging must adhere to MIL-STD 2073.

General Info

Navy procurement for critical Hydraulic Power Control Assemblies requiring strict manufacturing and testing compliance.

Agency

Department Of The Navy → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

PHILADELPHIA, PA, 19111-5098, USA

Set-Aside

NONE

Documents

(1)

SPRPA126QZC08.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Navy → Pa DLA Aviation At Philadelphia
ContactsNo contacts available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of The Navy → Pa DLA Aviation At Philadelphia
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
ContactsNo contact information available

Full Description

Show more
TECHNICAL DATA PACKAGE
Description
TDP VERSION NUMBER 001 1. SCOPE 1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system enabling the launch and/or recovery of aircraft. The use of incorrect or defective material would create a high probability of failure resulting in a serious personnel injury, loss of life, loss of vital shipboard systems or loss of aircraft. Therefore,the material has been designated as Critical material and special control procedures are invoked to ensure receipt of correct material. 1.2 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;2056AS0311-1; drawing number ( ;30003; ) ;LATEST REVISION.; , Revision ;NAWCAD LKE DRAWING PACKAGE.; and all details and specifications referenced therein. 1.3 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.4 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C. 2. APPLICABLE DOCUMENTS DRAWING DATA=2056AS0105 |30003| M| |D| | | | DRAWING DATA=2056AS0106 |30003| A| |D| | | | DRAWING DATA=2056AS0311-1 |30003| N| |D| | | | DRAWING DATA=2056AS0313 |30003| B| |D| | | | DRAWING DATA=2056AS0314 |30003| A| |D| | | | DRAWING DATA=2056AS0316 |30003| B| |D| | | | DRAWING DATA=2056AS0317 |30003| D| |D| | | | DRAWING DATA=2056AS0321 |30003| C| |D| | | | DRAWING DATA=2056AS0330 |30003| B| |D| | | | DRAWING DATA=2056AS0331 |30003| B| |D| | | | DRAWING DATA=2056AS0333 |30003| B| |D| | | | DRAWING DATA=2056AS0337 |30003| A| |D| | | | DRAWING DATA=2056AS0339 |30003| B| |D| | | | DRAWING DATA=2056AS0340 |30003| | |D| | | | DRAWING DATA=2056AS0341 |30003| C| |D| | | | DRAWING DATA=2056AS0342 |30003| C| |D| | | | DRAWING DATA=2056AS0343 |30003| C| |D| | | | DRAWING DATA=2056AS0344 |30003| | |D| | | | DRAWING DATA=2056AS0350 |30003| | |D| | | | DRAWING DATA=2056AS0360 |30003| A| |D| | | | DRAWING DATA=2056AS0361 |30003| A| |D| | | | DRAWING DATA=2056AS0363 |30003| A| |D| | | | DRAWING DATA=2056AS0388 |30003| B| |D| | | | DRAWING DATA=2056AS0389 |30003| B| |D| | | | DRAWING DATA=2056AS0398 |30003| B| |D| | | | DRAWING DATA=2056AS0503 |30003| B| |D| | | | DRAWING DATA=2056AS1501 |30003| K| |D| | | | 3. REQUIREMENTS - NOT APPLICABLE 4. QUALITY ASSURANCE PROVISIONS - NOT APPLICABLE. 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES - NOT APPLICABLE
REMARKS APPLY TO ITEM 0001 THIS IS AN ALRE NON CRITCAL ITEM. NAVSUP REFERENCE ONLY: FTB (24-10102): REPAIR (18-10118). REI 26-22056 STATES (04804) IS THE ONLY VALID SOURCE OF SUPPLY. \

Similar Contracts

Same NAICS industry code

NAICS: 332913
New
Federal
Plumbing Fixtures and Steel Grating Supply
US Embassy Tegucigalpa

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332913
New
DIBBS
Supply of Garbage Disposal Parts KitsThis subcontract involves the supply of 29 specialized garbage disposal parts kits, identified by NSN 4540012735778, to support prime contractors fulfilling Department of Defense supply contracts. The performance of this contract is centered at the DDSP New Cumberland Facility, with all deliverables required to strictly adhere to the RP001 DLA Packaging Requirements for Procurement and the RA001 DLA Master List of Technical and Quality Requirements. The procurement falls under NAICS code 332913 and was posted on September 2, 2026, with a response deadline of September 14, 2026. The selected provider is responsible for ensuring that all units are packaged and delivered according to specific DLA standards to ensure compliance with federal procurement guidelines.
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
URINAL, STATIONARY
Solicitation # SPE86-26-T-5522
Solicitation SPE8E8-26-T-5522 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of eight stationary urinals, identified as critical application items under NSN 4510-00-885-7570. Approved parts include P/N 2835U from Anchor Fabricators Inc, P/N 4392 from Midstar Inc, and P/N 8001 from Mag Aerospace Industries, LLC. The delivery is required within 167 days after receipt of order, with a need ship date of March 1, 2027, and a final required delivery date of March 12, 2027. Shipping is designated as FOB Origin under the First Destination Transportation program, with the delivery destination being DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-1. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges to account for demand volatility. The procurement incorporates various federal and defense regulations, including the Buy American Act, Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment and invoicing must be processed electronically through the Wide Area Workflow system.
WARNER ROBINS

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
EYE, FACE WASH
Solicitation # SPE8E8-26-T-5414
Solicitation SPE8E8-26-T-5414 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 13 units of eye and face wash, identified by NSN 4510-01-053-5374. The requirement is under NAICS code 332913 and specifies a delivery timeline of 167 days after the award, with a designated shipping destination of DLA Dist San Joaquin in Tracy, California. The contract is issued under the First Destination Transportation program with FOB Origin terms. Compliance requirements include adherence to DLA packaging requirements RP001, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for shipment marking. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplies. Administrative requirements mandate the use of the Wide Area Workflow system for electronic invoicing and payment. Offerors must comply with the Buy American Act and other domestic material restrictions, and submit their quotations via the DIBBS portal.
DLA DIST SAN JOAQUIN

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
PARTS KIT, GARBAGE DISP
Solicitation # SPE8E8-26-T-5431
Solicitation SPE8E8-26-T-5431 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 29 garbage disposal parts kits, identified by NSN 4540-01-273-5778. The contract is categorized under NAICS code 332913 and requires delivery within 29 days after the order is placed. Items are to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania, with both inspection and acceptance occurring at the destination. Quotations are due by September 14, 2026, and must be submitted via DIBBS or to the issuing office in Philadelphia. The procurement is subject to several technical and regulatory requirements, including DLA packaging requirements (RP001), MIL-STD-2073-1E for preservation, and MIL-STD-129 for marking. Special restrictions are in place regarding the use of mercury and the prohibition of hexavalent chromium. Contractors must comply with the Buy American and Balance of Payments Program and the Berry Amendment for domestic material preferences. Additionally, the contract mandates the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Security and safety compliance include safeguarding covered defense information per DFARS 252.204-7012 and adhering to the Hazard Communication Standard for any hazardous materials delivered.
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
CURTAIN FLAP, RUBBER
Solicitation # SPE8E8-26-T-5427
Solicitation SPE8E8-26-T-5427 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of 58 rubber curtain flaps, identified as part number 89715 from Somat Company 04863. This item is designated as a critical application item. The required delivery date is January 6, 2027, with a need ship date of August 13, 2026. Delivery is set as FOB Destination, with the shipping address located at DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination point in accordance with FAR 52.246-1. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Palletization must comply with DLA packaging requirements RP001. Special material restrictions are in place, specifically prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware. The procurement is subject to the Buy American and Balance of Payments Program and requires the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. All quotes must be submitted through the DLA Internet Bid Board System.
DLA DIST SAN JOAQUIN

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
FAUCET CPRSN
Solicitation # SPE86-26-T-5501
Solicitation SPE8E8-26-T-5501 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 42 units of FAUCET CPRSN, identified by NSN 4510-01-631-1460. The procurement is managed by the DDSP New Cumberland Facility, with a required delivery date of February 19, 2027, and a need ship date of March 1, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, although the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 requirements. Administrative requirements include the use of Wide Area WorkFlow for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and prohibitions on covered defense telecommunications equipment. Quotations were due by September 14, 2026, and should be directed to the point of contact, Alexis Selby.
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
CURTAIN, PULPER
Solicitation # SPE8E8-26-T-5496
Solicitation SPE8E8-26-T-5496 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 70 units of Pulper Curtains, identified by NSN 4540-01-651-7310. The requirement specifies a delivery timeline of 71 days after the order is placed, with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is governed by NAICS code 332913 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions. Technical compliance requires adherence to basic drawing 53711 6960328 Revision J. Quality assurance is managed through sampling methods defined by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances when using MIL-STD-105/ASQ Z1.4. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Offerors must comply with the Buy American Act and the Berry Amendment, and are prohibited from using additive manufacturing unless authorized. Price evaluation preferences are available for certified HUBZone small businesses, and all invoicing must be processed electronically via Wide Area WorkFlow.
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
HEATING BLANKET, ELECTR
Solicitation # SPE8E8-26-T-5511
Solicitation SPE8E8-26-T-5511, issued by the Department of Defense agency DLA Dist San Joaquin, is a request for quotations for two electrical heating blankets under NSN 4540-01-526-3477. The procurement is conducted as a fully competitive acquisition in accordance with military and federal specifications, with a delivery requirement of 167 days after the order is placed. The place of performance is located in Tracy, California, and the response deadline for quotes is September 14, 2026. The contract is governed by the DLA Master Solicitation Revision 105 and includes specific technical and quality requirements identified by R and I numbers. Key compliance mandates include DLA packaging requirements, the removal of government identification from non-accepted supplies, and adherence to covered defense information protocols. The solicitation is categorized under NAICS code 332913 and incorporates standard federal clauses regarding the Buy American Act, HUBZone preferences, and nonmanufacturer rules.
DLA DIST SAN JOAQUIN

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-5446
Solicitation SPE8E8-26-T-5446 is a fixed-price request for quotation issued by DLA Troop Support Construction and Equipment for the procurement of one electrical immersion type heating element, identified by NSN 4520-01-236-4363. The requirement falls under NAICS code 332913 and is designated as a small business set-aside. Delivery is required within 167 days after order receipt, with the place of performance and delivery located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The terms are FOB Origin, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as specific packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is required. Quotes must be submitted via the DLA Internet Bid Board System by the specified deadline.
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
DRAIN, FLOOR
Solicitation # SPE8E8-26-T-5393
Solicitation SPE8E8-26-T-5393 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of two floor drains. The required items are 70/30 copper nickel alloy Type D 2 inch deck drains, each equipped with a 2 inch trap and a steel ring, identified by NSN 4510-01-519-7830 and part number DDAV2CN7D2TSR. Delivery is required within 20 days after receipt of the order, with the destination and inspection point located at DLA Distribution Norfolk, Virginia. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following RP001 requirements. Special technical constraints include a prohibition on the intentional addition of mercury, requiring compliance with NAVSEA 5100-003D for any functional mercury components. Offers must be submitted via the DIBBS portal, and any proposed alternate parts require a complete data package for evaluation. Notably, items produced via additive manufacturing are ineligible for award. Payment and invoicing must be processed through the Wide Area WorkFlow system.
NORFOLK

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
Federal
45--URINAL,STATIONARY
Solicitation # SPE8E826T5410
DLA Troop Support is soliciting quotes for the procurement of 55 stationary urinals under solicitation number SPE8E826T5410. This requirement is designated as a total small business set aside under NAICS code 332913. The approved source for this item is 47WD8 7250150, and delivery is required to DLA Distribution within 336 days after receipt of order. Interested parties must submit their quotes electronically by the deadline of September 14, 2026. The solicitation is available exclusively online, and no hard copies or separate technical drawings are provided. All inquiries should be directed to the buyer via the DIBBS portal or the provided email contact.
DLA Troop Support

POSTED

3 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of The Navy → Pa DLA Aviation At Philadelphia

Same awarding agency

NAICS: 332710
New
DRAWER ASSEMBLY,AIR — 1680016616785 — SPRPA126QZB94
Solicitation # SPRPA126QZB94
The Department of the Navy, through the DLA Aviation office in Philadelphia, has issued solicitation SPRPA126QZB94 for the procurement of air drawer assemblies. This request was posted on September 4, 2026, with a response deadline set for September 14, 2026. The contract requires a specific vendor part number format where the CAGE code occupies positions 1 through 6 and the part number occupies positions 7 through 40. Performance of the contract is designated for Philadelphia, Pennsylvania.
Machine Shops

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
FUEL FEED CELL,AIRC — 1680015293697 — SPRPA126RWB77
Solicitation # SPRPA126RWB77
This solicitation, identified as SPRPA126RWB77, is for the procurement of 77 aircraft fuel feed cells under NSN 7R-1680-015293697-V2. The delivery terms are FOB Origin. Due to the flight-critical nature of the item and the lack of available government technical data or data rights, the part must be acquired from sources specified on a source control or selected item drawing per DoD-STD-100. The government intends to negotiate with a single source under FAR 6.302-1, although other responsible sources may express interest or submit proposals. Because the item is flight critical, any provider not already approved must submit detailed documentation via the NAVSUP Weapon Systems Support Source Approval Information Brochures to be considered for award. Proposals must be submitted by October 5, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334290
New
INTERFACE UNIT,COMM — 5895016897762 — SPRPA126QZB99
Solicitation # SPRPA126QZB99
The Department of the Navy, through the DLA Aviation office in Philadelphia, has issued solicitation SPRPA126QZB99 for the procurement of an interface unit for communication. The request was posted on September 4, 2026, with a response deadline set for September 14, 2026. The contract requires a specific vendor part number format where the CAGE code occupies positions 1 through 6 and the part number occupies positions 7 through 40. Performance and delivery are centered in Philadelphia, Pennsylvania.
Other Communications Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333413
New
FAN,VANEAXIAL — 4140014119952 — SPRPA126QUB57
Solicitation # SPRPA126QUB57
This presolicitation notice, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of one axial vane fan under NSN 7R-4140-014119952-P8 and reference number 4101054. The item is classified as a commercial, nondevelopmental, or off-the-shelf product with delivery terms set as FOB Origin. The government intends to solicit and negotiate with a single source under the authority of FAR 6.302-1, though it is inviting all responsible sources to submit capability statements or proposals to determine if a competitive procurement is warranted. Interested parties must respond by September 14, 2026, or within 45 days of publication. While the government is not currently utilizing FAR Part 12 policies for this acquisition, vendors may notify the contracting officer of their ability to satisfy the requirement with a commercial item within 15 days of the notice. Technical specifications and standardized documents can be obtained through the DODSSP or the ASSIST-Online portal.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
CYLINDER,ACTUATING — 3040016709427 — SPRPA126QZB83
Solicitation # SPRPA126QZB83
The Department of the Navy, through the Pa DLA Aviation At Philadelphia, has issued solicitation SPRPA126QZB83 for the procurement of actuating cylinders. This request was posted on September 4, 2026, with a response deadline set for September 14, 2026. The contract requires a specific vendor part number format where the first six positions represent the CAGE code and positions seven through forty represent the part number. Performance for this requirement is located in Philadelphia, Pennsylvania.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
New
PWR DRIVE UNIT — 1680015991114 — SPRPA126QZB97
Solicitation # SPRPA126QZB97
The Department of the Navy, through the DLA Aviation office in Philadelphia, has issued solicitation SPRPA126QZB97 for the procurement of a Power Drive Unit. The request specifies a unique vendor part number format where the first six positions are reserved for the CAGE code and positions seven through forty are designated for the part number. The solicitation was posted on September 4, 2026, with a response deadline of September 14, 2026. Performance and delivery are centered in Philadelphia, Pennsylvania, and interested parties can find further details via the Navy's electronic commerce portal.

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
VALVE,RELIEF,FUEL — 2915012016004 — SPRPA126QZB95
Solicitation # SPRPA126QZB95
The Department of the Navy, through the DLA Aviation office in Philadelphia, has issued solicitation SPRPA126QZB95 for the procurement of fuel relief valves. The request specifies a unique part number format where the CAGE code occupies positions 1 through 6 and the part number occupies positions 7 through 40. This solicitation was posted on September 4, 2026, with a response deadline of September 14, 2026. The place of performance is located in Philadelphia, Pennsylvania.
Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 928110
New
RECEIVER,COUNTERMEA — 5865017083360 — SPRPA126QZB77
Solicitation # SPRPA126QZB77
The Department of the Navy, through the DLA Aviation office in Philadelphia, has issued solicitation SPRPA126QZB77 for a receiver countermeasure. The procurement requires a specific vendor part number format where the CAGE code occupies positions 1 through 6 and the part number occupies positions 7 through 40. This solicitation was posted on September 4, 2026, with a response deadline of September 14, 2026. The place of performance is located in Philadelphia, Pennsylvania, 19111-5098.
National Security

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334111
New
COMPUTER SUBASSEMBL — 7050145761858 — SPRPA126RRB12
Solicitation # SPRPA126RRB12
This contract is for the procurement of four units of a computer subassembly under NSN 7R-7050-145761858-BL, with delivery terms set as FOB Origin. Because the item is flight critical and requires specific engineering source approval to maintain quality, the government intends to solicit and negotiate with a single source under FAR 6.302-1. The approved sources hold essential technical data and manufacturing knowledge that are not economically available to the government, making their expertise necessary for the acquisition. Prospective bidders who are not currently approved sources must submit detailed information via the NAVSUP Weapon Systems Support Source Approval brochures to be considered for award. While the government is currently pursuing a single-source negotiation, other responsible sources may submit capability statements or proposals within the specified timeframe. The procurement is managed by the DLA Aviation office in Philadelphia and does not follow FAR Part 12 commercial item policies.
Electronic Computer Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 333996
New
PUMP,RECIPROCATING — 4320011820200 — SPRPA126QYD35
Solicitation # SPRPA126QYD35
This solicitation, issued by the Department of the Navy via the DLA Aviation office in Philadelphia, is for the procurement of a reciprocating pump under solicitation number SPRPA126QYD35. The contract specifies that the material is designated as critical because it is used in shipboard systems for aircraft launch and recovery, where failure could lead to serious injury or loss of life. Consequently, strict control procedures are required to ensure the delivery of correct and non-defective materials. The contractor is responsible for manufacturing, testing, and inspecting the items according to NAWCAD Lakehurst drawing 6532D326 and associated specifications. All necessary manufacturing aids, including fixtures, jigs, and test equipment, are the sole responsibility of the contractor. Markings must comply with MIL-STD-130, packaging must follow MIL-STD-2073, and compliance with IPC/EIAJ-STD-001C is expected if MIL-STD-454 is referenced. The response deadline for this solicitation is October 5, 2026.
Fluid Power Pump and Motor Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
GENERATOR,AIRCRAFT — 1680015920028 — SPRPA126QVC54
Solicitation # SPRPA126QVC54
This Technical Data Package for aircraft generators under solicitation SPRPA126QVC54 establishes rigorous quality control and inspection standards for the contractor. The contractor must maintain a quality system compliant with ISO 9000, 9001, 9002, or equivalent military standards and provide detailed quality control documentation, test procedures, and a Repair Quality Plan for government approval. Markings must adhere to MIL-STD-130, and packaging must follow MIL-STD 2073. The contractor is responsible for all inspection requirements, including the control of purchased materials and the maintenance of detailed inspection reports for at least twelve months following acceptance. While the contractor has Internal Review Board authority for minor non-conformances and rework, the government retains formal Material Review Board authority for as-is dispositions. Additionally, the contractor must maintain comprehensive historical record files for each serial number and submit all failure analysis and corrective action reports to the government.
Aircraft Engine and Engine Parts Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
DOME,SONAR — 5845145887069 — SPRPA126RRB06
Solicitation # SPRPA126RRB06
This contract, identified by NSN 7R-5845-145887069-CB and reference number 44035965AK, is for the procurement of four sonar domes. The delivery terms are set as FOB Origin. Due to the flight critical nature of the item and the fact that essential technical data and manufacturing knowledge are held by specific sources, the government requires engineering source approval from the design control activity to maintain part quality. The government intends to negotiate with a single source under FAR 6.302-1, though other responsible sources may submit capability statements or proposals within the specified timeframe. Any entity not previously approved must submit detailed information via the NAVSUP Weapon Systems Support Source Approval brochures to be considered for award. This solicitation does not follow FAR Part 12 commercial item policies, and the government retains full discretion on whether to conduct a competitive procurement based on the responses received.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details