Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 19, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hydraulic Power Unit Industry Day

Closed
W91237-24-SB-0002Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333613
New
SLED
Marine Mechanical Rigging and Steering ContractorThe Marine Mechanical Rigging and Steering Contractor subcontract involves the physical removal of existing propulsion and the installation of new engines for boat repower projects managed by the Confederated Tribes of the Colville Reservation. The scope of work includes decommissioning Honda BF250A engines, mounting new engines with marine stainless steel hardware and sealant, and interfacing the propulsion systems with SeaStar PA1315-2 Marine Hydraulic PRO Power Assist Steering Units. Qualified contractors must hold a marine mechanical certification to deliver fully installed propulsion and steering systems. This opportunity was posted on October 20, 2026, with a response deadline of November 13, 2026. The project falls under NAICS code 333613 and is intended for those capable of supporting prime contractors on these specific marine upgrades.
Confederated Tribes of the Colville Reservation

POSTED

about 10 hours ago

DEADLINE

in 23 days
NAICS: 333613
New
Federal
30--GEARSHAFT,MULTIPLE GEA
Solicitation # SPE7LX27U0267
DLA Weapons Support

POSTED

about 14 hours ago

DEADLINE

in 14 days
NAICS: 333613
New
Federal
30--CONNECTING LINK,RIG
Solicitation # SPE7L127T1835
DLA Weapons Support

POSTED

about 14 hours ago

DEADLINE

in 12 days
NAICS: 333613
New
Federal
30--GEAR,SPUR
Solicitation # SPE7L127T1837
DLA Weapons Support

POSTED

about 14 hours ago

DEADLINE

in 12 days
NAICS: 333613
New
Federal
30--SHAFT ASSEMBLY,SHOULDE
Solicitation # SPE7L127Q0082
DLA Weapons Support

POSTED

about 14 hours ago

DEADLINE

in 8 days
NAICS: 333613
New
Federal
25--DRIVE SHAFT ASSEMBLY,C
Solicitation # SPE7LX27U0285
DLA Weapons Support

POSTED

about 14 hours ago

DEADLINE

in 14 days
NAICS: 333613
New
DIBBS
MIL-SPEC Packaging and Palletization ServicesThis subcontract for the Defense Logistics Agency involves providing specialized military packaging, marking, and palletization services for power supply units. The contractor is responsible for ensuring all items are processed according to RP001 and MIL-STD-2073-1E standards, with container marking adhering to MIL-STD-129 and MIL-STD-130N. All deliverables must utilize MIL-SPEC materials and DLA-approved pallets to ensure they are ready for final agency acceptance. The opportunity is categorized under NAICS code 333613 and was posted on October 19, 2026, with a response deadline of October 30, 2026. The scope of work focuses on supporting prime contractors to meet strict Department of Defense requirements for the transport and storage of critical military components.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 333613
New
DIBBS
Supply of Groove PulleysThis subcontract involves the supply of six groove pulleys for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The provider is responsible for manufacturing or sourcing pulleys that strictly meet NSN specifications, ensuring all items are delivered to Chambersburg, Pennsylvania. Compliance is a critical component of this agreement, requiring adherence to the Buy American Act and DFARS cybersecurity reporting standards. Additionally, all shipments must follow RP001 palletization guidelines and MIL-STD-129 labeling requirements to ensure proper identification and handling within the Department of Defense supply chain.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 333613
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors delivering aerospace components to the Department of Defense. The scope of work involves specialized military packaging and marking in strict accordance with MIL-STD-2073-1E and MIL-STD-129, ensuring all items include necessary National Stock Numbers, contract details, lot numbers, and CAGE codes. Additionally, the provider must execute palletization per RP001 and apply Hazard Warning Labels as required by 29 CFR 1910.1200. The final deliverables are marked and packaged components prepared for FOB Origin shipment to DLA Distribution Jacksonville. This requirement falls under NAICS code 333613 and is managed by the DLA Weapons Support Land Supplier Opns Vehicle SPT. The response deadline for this opportunity is October 30, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 333613
New
DIBBS
Manufacture of Rigid Connecting Links (CSI)This subcontract involves the manufacture of Rigid Connecting Links for prime contractors supporting US Air Force projects under the Department of Defense. The selected provider must fabricate parts in strict accordance with specific technical drawings, including NR 76823 I0Y201 (Rev AG), 76823 2-73226 (Rev F), and 16236 EI-007093694. Due to the nature of the components, the contractor must adhere to Critical Safety Item quality controls and utilize precision machining equipment. Key deliverables include the finished links and the successful execution and certification of a First Article Test as specified in CLIN 0002. The contractor is required to maintain compliance with 29 CFR 1910.1200 safety standards. Performance for this contract will take place in New Cumberland, Pennsylvania, with a response deadline set for October 30, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 333613
New
DIBBS
Piston Ring Supply (NSN 3040015878720)This subcontract involves the supply of precision-manufactured piston rings for prime contractors supporting the Department of Defense, specifically under the DLA Weapons Support Land Supply Chain ESOC Buys. The contractor is responsible for manufacturing or sourcing rings that strictly adhere to the DLA Master List of Technical and Quality Requirements, with a specific focus on standards RA001 and RQ011. All deliverables must meet the exact metallurgy and tolerance specifications required for NSN 3040015878720. The performance of this contract is centered in Chambersburg, Pennsylvania, under NAICS code 333613. Interested parties must adhere to the timeline established by the posting date of October 19, 2026, with a final response deadline of October 30, 2026. Delivery of the piston rings is required as specified by the designated part number and National Stock Number.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 333613
New
DIBBS
Supply of Shoulder Pump Shafts for Bomb Lift EquipmentThis subcontract involves the fabrication or sourcing of two shoulder pump shafts, part number 3102211, for use in Air Force Type AS32MK3 Bomb Lift equipment. The project is managed under the DLA Weapons Support Land Supply Chain for prime contractors and strictly prohibits the use of additive manufacturing in the production process. The contractor must ensure all items are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Additionally, the provider is required to maintain NIST SP 800-171 compliance and adhere to the Buy American Act. The solicitation was posted on October 19, 2026, with a response deadline of October 30, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days

General Info

Agency

Department Of Defense → W072 Endist Huntington

NAICS

333613 - Mechanical Power Transmission Equipment Manufacturing

Place of Performance

Newport, OH, 45768, USA

Set-Aside

NONE

Documents

1

Security Information Sheet - Hydraulic Power Unit Industry Day

PDF, Low priorityindustry-day
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates
PhaseClosed
Posted

event

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W072 Endist Huntington
Contacts1 person available
OfficeHUNTINGTON, WV, 25701-5000, USA
Organization / AgencyDepartment Of Defense → W072 Endist Huntington
Office AddressHUNTINGTON, WV, 25701-5000, USA
Contacts
Eileen S. Hodges
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPECIAL NOTICE: INDUSTRY DAY FOR HYDRAULIC POWER UNIT CUSTOM MANUFACTURERS AND CONSTRUCTION (INSTALLATION) The US Army Corps of Engineers, Huntington District in combination with Pittsburgh District, is hosting an Industry Day on 13 August 2024 at its Willow Island Locks and Dam, Newport, OH, concerning upcoming opportunities associated with upgrades to the Hydraulic Operating Systems at several Ohio River Lock and Dam Projects. An overview of the recently replaced original and newly installed replacement equipment will be provided. A brief tour of the lock and demonstration/discussion regarding its operation will also be provided. This Industry Day will be an excellent opportunity for contractors with NAICS codes 237990, 238990, 333613, 333995, and 333996, to learn more about this upcoming work and meet the design team. There will also be discussion where the Government will be seeking feedback on various aspects of the manufacturing of custom hydraulic power units and installation techniques. Virtual, private one-on-one sessions, with individual contractors will also be available on Wednesday, August 14th for those firms interested. During these sessions, each party can ask specific questions about the work. Please contact Eileen Hodges to confirm your attendance on Tuesday and to reserve time with the design team on Wednesday: Eileen.S.Hodges@usace.army.mil or 304-399-5632. This is a market research effort to assist the Corps in developing plans and specifications for the design and manufacturing of custom hydraulic power units to modern industry standards and potential methods for construction/installation of the units. Some of the units we are aware of needing upgrades include but are not limited to: * Hannibal 4-corners FY25 award anticipated - Pittsburgh District * Braddock 4-corners FY25 award anticipated - Pittsburgh District * New Cumberland Aux. Chamber only 4-corners FY26 award anticipated - Pittsburgh * Dashields 4-corners FY26 award anticipated - Pittsburgh District * Huntington District projects are to be determined *All are subject to change without notice. Additional Information: All visitors to U.S. Army Corps of Engineers properties are required to complete the Security Information Form. Please complete the attachment and save with a password protection, submit the form to the security personnel listed on the bottom in one email and then send a separate email with the password so that they can open and process the request. If attendee is not a U.S. Citizen, additional requirements apply. In your email, please include the following information: Name of Company: Name of Corps Project/Property contract is for: Willow Island Locks and Dam, Newport, OH Contract number & Task Order (if applicable): N/A Name of USACE Contracting Officer(s)/POC's you are working with: Joseph Fuhr and Eileen Hodges

More opportunities from Department Of Defense → W072 Endist Huntington

Same awarding agency

NAICS: 237990
New
Federal
Winfield Locks and Dam Major Rehab Industry Day
Solicitation # W91237-27-SN-0001
The Winfield Locks and Dam Major Rehabilitation Project, managed by the U.S. Army Corps of Engineers Huntington District, is a comprehensive infrastructure modernization effort designed to extend the facility's operational life by 50 years. The scope of work includes the full replacement of five standard roller gates and one specialized flap gate, along with the rehabilitation of 1930s-era electro-mechanical drive systems. Critical structural repairs involve replacing the post-tensioned Tainter Gate anchorage system due to stress corrosion cracking and proactively replacing the Main Lock Miter Gate anchorages. Additionally, the project encompasses the replacement of the Dam Service Bridge, modernization of electrical service distribution and SCADA systems, and the replacement of worn components within the Main Lock Emergency Gate Machinery. To facilitate this effort, an Industry Day event is scheduled for November 02, 2026, featuring a presentation at the Winfield Community Center and a site walkthrough at the Winfield Locks and Dam. Interested prime contractors and subcontractors must register by November 01, 2026, at 12:00 PM Noon. The event includes opportunities for in-person one-on-one meetings for prime contractors on the day of the event, with virtual sessions available for all partners starting November 03, 2026. Technical requirements for the project include strict adherence to ASTM A578 for ultrasonic inspections of plates and AWS D1.5 for reinforcing fillet welds, with specific performance testing required for bar anchor installations.
Other Heavy and Civil Engineering Construction

POSTED

5 days ago

DEADLINE

in 12 days
View Details
NAICS: 237990
Federal
Fishtrap Lake Intake Structure and Dam Rehabilitation; W91237-26-R-A020
Solicitation # W9123726RA020
Solicitation W9123726RA020 is a new acquisition issued by the Department of Defense, specifically the W072 Endist Huntington, for the rehabilitation of the intake structure and dam at Fishtrap Lake in Shelibiana, Kentucky. The project requires contractors to perform work according to provided plans and specifications, and offerors are strongly encouraged to conduct a site inspection at the project location. The response deadline has been extended via amendment to November 6, 2026, with an additional site visit scheduled for October 22, 2026. Proposals must be submitted electronically through the PIEE Solicitation Module in searchable Adobe PDF format and are divided into three volumes: Past Performance, Small Business Participation Plan, and Cost/Price. The government will evaluate submissions based on the relevance and quality of past performance, the detail of the small business participation plan, and the reasonableness and completeness of the proposed pricing. Required documentation includes Standard Form 1442, representations and certifications, and a valid registration in the System for Award Management.
Other Heavy and Civil Engineering Construction

POSTED

12 days ago

DEADLINE

in 17 days
View Details
NAICS: 541330
Federal
SCADA and Electrical Controls ModernizationThis subcontract opportunity involves the modernization of electrical controls and SCADA systems for prime contractors working on USACE dam projects under the Department of Defense, specifically the W072 Endist Huntington. The scope of work requires the design, programming, and installation of SCADA software, PLC hardware, and electrical control panels utilizing industrial networking gear to deliver a fully integrated and operational system. The project is categorized under NAICS code 541330 and will be performed in Red House, zip code 25168. Interested parties should note that the solicitation was posted on October 8, 2026, with a response deadline set for November 1, 2026, at 4:00 PM.
Engineering Services

POSTED

13 days ago

DEADLINE

in 12 days
View Details
NAICS: 237310
Federal
Dam Service Bridge ReplacementThis subcontract opportunity involves the fabrication and installation of a new Dam Service Bridge to support prime contractors on USACE dam projects. The scope of work includes site preparation, structural steel fabrication, and the installation of bridge decking and steel beams. The final objective is to deliver a completed and certified bridge that will facilitate the construction of roller gates. The project is managed under the Department of Defense through the W072 Endist Huntington agency and will be performed in Red House, zip code 25168. Classified under NAICS code 237310, the solicitation was posted on October 8, 2026, with a response deadline set for November 1, 2026.
Highway, Street, and Bridge Construction

POSTED

13 days ago

DEADLINE

in 12 days
View Details
NAICS: 811310
Federal
Emergency Gate Machinery OverhaulThe Emergency Gate Machinery Overhaul is a subcontract opportunity under the Department of Defense, specifically for the W072 Endist Huntington agency. The project focuses on the restoration of main lock emergency gate machinery for prime contractors working on USACE dam projects in Red House, zip code 25168. The scope of work involves the removal of degraded components, specifically worn wire ropes and delaminating sheaves, and the installation of new high-strength wire ropes and industrial sheaves to ensure the machinery is fully restored. This opportunity is categorized under NAICS code 811310 and was posted on October 8, 2026. Interested parties must submit their responses by the deadline of November 1, 2026, at 4:00 PM.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

13 days ago

DEADLINE

in 12 days
View Details
NAICS: 238990
Federal
Miter Gate Anchorage ReplacementThis subcontract opportunity involves the proactive replacement of main lock miter gate anchorage systems for prime contractors working on USACE dam projects. The scope of work requires the removal of existing anchorage and the installation of new systems utilizing heavy-duty marine anchorage hardware to deliver a fully functional miter gate anchorage system. The project is managed under the Department of Defense through the W072 Endist Huntington agency and will be performed in Red House, zip code 25168. Interested parties must respond by November 1, 2026, for this effort categorized under NAICS code 238990.
All Other Specialty Trade Contractors

POSTED

13 days ago

DEADLINE

in 12 days
View Details
NAICS: 238990
Federal
Post-Tensioned Anchorage System ReplacementThis subcontract involves the full replacement of post-tensioned anchorage systems for Tainter gates on USACE dam projects managed by the Department of Defense, specifically through the W072 Endist Huntington. The primary objective is to remediate Stress Corrosion Cracking by removing failing anchors and installing new, corrosion-resistant hardware using specialized post-tensioning equipment to ensure a fully functional and tensioned system. The work is located in Red House, zip code 25168, and falls under NAICS code 238990. Interested parties must note that the solicitation was posted on October 8, 2026, with a response deadline of November 1, 2026.
All Other Specialty Trade Contractors

POSTED

13 days ago

DEADLINE

in 12 days
View Details
NAICS: 238210
Federal
Electrical Service Distribution UpgradeThe Electrical Service Distribution Upgrade is a subcontract opportunity under the Department of Defense, specifically managed by the W072 Endist Huntington. The project focuses on the modernization of electrical service distribution systems for prime contractors working on USACE dam projects located in Red House, ZIP code 25168. The scope of work involves the installation of new primary power feeders, distribution panels, and associated electrical infrastructure, utilizing industrial distribution switchgear and high-voltage power feeders. Classified under NAICS code 238210, this project aims to deliver a fully modernized electrical service distribution system. The solicitation was posted on October 8, 2026, with a response deadline set for November 1, 2026, at 4:00 PM.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

13 days ago

DEADLINE

in 12 days
View Details
NAICS: 811310
Federal
Hoist Machinery Mechanical and Electrical RehabilitationThis subcontract opportunity involves the mechanical and electrical rehabilitation of hoist machinery for USACE dam projects managed by the Department of Defense, specifically through the W072 Endist Huntington. The scope of work focuses on the dismantling of 1930s-era legacy machinery and the subsequent refurbishment or replacement of drive motors, gears, and mechanical linkages. The objective is to utilize modern industrial drive components to deliver fully operational roller gate hoist machinery. The project will be performed in Red House, zip code 25168, under NAICS code 811310. Interested parties must submit their responses by the deadline of November 1, 2026. This effort is designed to support prime contractors in upgrading critical infrastructure to ensure the continued reliability and functionality of dam operations.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

13 days ago

DEADLINE

in 12 days
View Details
NAICS: 332323
Federal
Dam Roller Gate Fabrication and InstallationThis subcontract involves the engineering, fabrication, and installation of heavy marine-grade steel water-control gates for USACE dam rehabilitation projects managed by the Department of Defense, specifically the W072 Endist Huntington. The scope of work requires the delivery of five standard roller gates and one specialized flap gate, including a custom design specifically for Gate 6. The project will be performed in Red House, zip code 25168, under NAICS code 332323. Interested parties must note the response deadline of November 1, 2026, for this specialized infrastructure effort.
Ornamental and Architectural Metal Work Manufacturing

POSTED

13 days ago

DEADLINE

in 12 days
View Details
NAICS: 332710
Federal
Vehicle Recompete: FABRICATION AND PARTS REHABILITATION IDIQ NTE $5M. BASE YEAR PLUS FOUR OPTION… — INDEFINITE DELIVERY / INDEFINITE QUANTITY W9123723Q0003This Indefinite Delivery / Indefinite Quantity contract for the Department of the Army focuses on fabrication and parts rehabilitation services. The vehicle has a total ceiling of 5 million dollars and is structured with a base year followed by four option years, with an ordering period extending through March 31, 2028. There are currently two awardees under this solicitation, with a medium confidence level that the contract will be recompete. To date, there are 12 active task orders totaling 2,423,018.61 dollars. Moran Iron Works Inc is the primary contractor, holding 10 orders valued at 2,354,727.61 dollars, including significant projects for culvert valve bulkheads and dewatering structures at the Meldahl Locks and Dam. Custom Fabrication & Coatings Inc holds the remaining two orders valued at 68,291 dollars.
Machine Shops

POSTED

20 days ago

DEADLINE

N/A
View Details
NAICS: 237990
Federal
Pre-Solicitation Notice for Indefinite Delivery Contract (IDC) for Regional Dredge Multiple Award Task Order Contract (MATOC) - USACE Huntington District - W91237-26-R-A024
Solicitation # W9123726RA024
This contract is a pre-solicitation for maintenance dredging, clearing, and snagging services for Ohio River Government lock facilities and open channel areas. The work covers the geographical boundaries of the Nashville, Louisville, Huntington, and Pittsburgh districts, including any navigable tributaries of the Ohio River system. The U.S. Army Corps of Engineers intends to award three Firm Fixed Price Indefinite Delivery, Indefinite Quantity Multiple Award Task Order Contracts (IDIQ-MATOC) with a shared total capacity not to exceed 80 million dollars. The agreement consists of a one-year base period with four optional one-year extensions. The procurement is open to all businesses under NAICS code 237990, though large businesses must comply with specific small business subcontracting plans. Selection will be based on past performance, the quality of the small business participation plan, and price reasonableness. All proposals must be submitted electronically via the PIEE Solicitation Module, and firms must be registered in the System for Award Management to be eligible for an award. Solicitation documents are expected to be available around October 2, 2026.
Other Heavy and Civil Engineering Construction

POSTED

about 1 month ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS