Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Hydro-Mechanical Unit (HMU) Harness Tester

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the design and furnishing of one LTCT31902-1 HMU Harness Tester specifically for the test requirements of Hydro-Mechanical Unit part number 2541347. Managed by the Department of Defense through the W6QK Acc Anad agency in Anniston, Alabama, the current agreement is held by Honeywell International Inc under a firm fixed price arrangement valued at 188,493.75 dollars. The current performance period is expected to end on November 26, 2026. While the original award was not competed, this opportunity is identified as a likely recompete with a medium confidence level. Primary coordination for this requirement is handled by Ellen Bethea and Heather Glover.

General Info

Honeywell will design one HMU Harness Tester for DoD for 188,493.75 dollars.

Agency

Department Of Defense → W6QK Acc Anad

NAICS

335929 - Other Communication and Energy Wire Manufacturing

Place of Performance

AL, 46628, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMay 26

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc Anad

Contacts2 people available

OfficeANNISTON, AL, 36201-4199, USA

Organization / AgencyDepartment Of Defense → W6QK Acc Anad

Office AddressANNISTON, AL, 36201-4199, USA

Contacts

Ellen Bethea

contact@example.gov

+1 (555) 000-0000

Heather Glover

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: W911KF26PA017 Incumbent: HONEYWELL INTERNATIONAL INC Contract Value: $188,493.75 Potential End Date: 2026-11-26T00:00:00.000Z Competition: NOT COMPETED Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 40/100)
Design and furnish one HMU Harness Tester, LTCT31902-1, for test requirements of the Hydro-Mechanical Unit (HMU) part number 2541347.

Similar Contracts

Same NAICS industry code

Custom Branched Wiring Harness FabricationThis subcontract involves the fabrication of custom branched wiring harnesses for prime contractors under Defense Logistics Agency supply contracts. The manufacturer must adhere to Basic Drawing NR 1X4F3 AMSCBDOC Revision DTD 03/07/2007 and Aviation Ground Equipment Corp P/N 7000AG1174-1 to produce the final product, identified as NSN 6150-01-624-6097. All delivered units must be completed, tested, and certified. Quality assurance requires rigorous testing for electrical continuity and insulation resistance in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contractor must maintain compliance with the Buy American Act and complete a CMMC Level 2 self-assessment. The opportunity is categorized under NAICS code 335929 with a response deadline of November 5, 2026.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract opportunity with the Department of Defense DLA Weapons Support ASC Commodities Division involves the manufacture and assembly of special purpose electrical cable assemblies. The selected contractor will fabricate eight completed and tested assemblies, including one unit for First Article Testing, based on limited rights technical data. All deliverables must adhere to MIL-STD-130 for IUID application and be produced in Tracy, California. Eligible bidders must be small businesses and maintain either ISO 9001:2015 or SAE AS9100 certification. Additionally, a CMMC Level 2 self-assessment is required for compliance. Responses to this solicitation are due by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Military-Grade Electrical Power Cable SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Nuclear Reactor Program, requires the supply of 24,000 feet of electrical power cable. The materials must be manufactured or sourced to meet NSN 6145-01-224-8308 specifications. Strict adherence to military standards is required, including preservation and packaging per MIL-DTL-12000, packaging data per MIL-STD-2073-1E, and markings per MIL-STD-129. The contract is designated as a Total Small Business Set-Aside under NAICS code 335929. Delivery of the cable is required FOB Origin to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 15 hours ago

DEADLINE

CABLE, POWER, ELECTRICAL

Solicitation # SPE7M2-27-T-0461

Solicitation SPE7M2-27-T-0461 is a small business set-aside procurement issued by the DLA Weapons Support Nuclear Reactor Program for the supply of 510 feet of electrical power cable, identified by NSN 6145-01-461-7192. The material must adhere to the NEMA-WC27500 technical standard and be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The original required delivery date is June 25, 2027, with a need ship date of April 26, 2027, and a delivery timeframe of 167 days after receipt of order. Shipping terms are specified as FOB Origin, and the contract allows for a quantity variance of plus or minus 5 percent. The contract mandates strict compliance with MIL-STD-129 for marking and RP001 for palletization, with packaging governed by MIL-STD-2073-1E. Special requirements include the prohibition of intentionally added mercury and the requirement to provide material in continuous lengths based on specific advice codes. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The procurement incorporates various FAR and DFARS clauses, including those related to cybersecurity (DFARS 252.204-7012), the Buy American Act, and HUBZone small business price preferences. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 15 hours ago

DEADLINE

CABLE, SPECIAL PURPOSE,

Solicitation # SPE7M1-27-T-1777

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

CABLE, POWER, ELECTRICAL

Solicitation # SPE7M2-27-T-0514

Solicitation SPE7M2-27-T-0514 is a request for 24,000 feet of electrical power cable (NSN 6145012248308) for the DLA Weapons Support Nuclear Reactor Program. The requirement specifies a quantity variance of plus or minus 5% and mandates that the material be provided in continuous lengths, with a minimum length of 250 feet and 500 feet per reel. The procurement is a total small business set-aside under NAICS code 335929, with delivery required within 167 days of award, targeting a need ship date of April 26, 2027, and a final delivery date of June 6, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The contractor must adhere to strict technical and quality standards, including MIL-DTL-24640/16E and MIL-DTL-24640C. Packaging and preservation must comply with MIL-DTL-12000 and MIL-STD-2073-1E, while marking must follow MIL-STD-129. The contract prohibits the use of Class I ozone-depleting substances and the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity and hazardous material reporting requirements is mandatory. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and invoicing is to be processed through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 15 hours ago

DEADLINE

CABLE ASSEMBLY, RADIO FREQUENCY

Solicitation # SPE4A6-27-R-X132

Solicitation SPE4A6-27-R-X132 is an Indefinite Delivery Purchase Order issued by the DLA Weapons Support ASC Commodities Division for the procurement of 67 radio frequency cable assemblies, identified as NSN 5995-01-676-2286 and L3Harris Technologies part number 10511-0730-A015. This critical application item is subject to a firm fixed price and a total contract value of up to 350,000 dollars over a five-year base period. The required delivery timeline is 133 days after the date of order, with inspection and acceptance occurring at the destination. This procurement is designated as a total small business set-aside. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with specific verification levels for critical, major, and minor attributes. Award determination is based on best value, weighing price, quoted delivery, and past performance, with a heavy emphasis on SPRS assessments and historical quality and delivery compliance. Compliance with various FAR and DFARS clauses is required, including safeguarding covered defense information under DFARS 252.204-7012 and adhering to the Buy American and Balance of Payments Program. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Specialized Cable Assembly ManufacturingThis subcontract involves the manufacturing of Special Purpose Cable, part number 6062427-711, for prime contractors working on Department of Defense projects under the Navsup Weapon Systems Support Mech. The scope of work includes the design and assembly of connectors, shielding, and conductors, ensuring all products adhere to NIIN 015533481 specifications and Technical Data Package Version 004. The selected provider must possess the specific capability to manufacture according to Curtiss-Wright Electro-Mechanical Corp specifications to deliver the finished cable assemblies. This opportunity falls under NAICS code 335929, with a response deadline set for October 30, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

CABLE,SPECIAL PURPO

Solicitation # N0010426QBF42

Solicitation N00104-26-Q-BF42 is a fixed-price request for the manufacture and design of six special purpose cables, identified by part number 6062427-711 and NIIN 015533481. The procurement is managed by the Navsup Weapon Systems Support Mech office and is designated as unreviewed-unrestricted, though it includes a 10 percent price evaluation preference for HUBZone small businesses. The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer. The items must be produced by Curtiss-Wright Electro-Mechanical Corp and must strictly adhere to mercury exclusion requirements. The contract specifies a delivery window of 180 days with FOB Destination terms. Inspection and acceptance will occur at the contractor or subcontractor plant, and the contractor is required to maintain an acceptable inspection system and provide a Certificate of Compliance upon delivery. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labeling and potential cleanliness controls under MIL-PRF-23199. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. All quotes must be submitted by January 8, 2026, via email or NECO, and must include a completed Standard Form 33 and the required schedules.

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

Electrical Power Cable Supplier (NSN 6145-01-086-5029)This subcontract involves the supply of 38,500 feet of specialized electrical power cable for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. All materials must strictly adhere to NSN 6145-01-086-5029 specifications and must be of domestic origin. Additionally, the supplier is responsible for ensuring that all packaging and preservation processes are performed in strict accordance with MIL-DTL-12000. The contract is categorized under NAICS code 335929 and specifies that delivery of the packaged cable will be handled via Government-Arranged Transportation. Performance for this requirement is centered in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Specialized Cable Assembly ManufacturingThis subcontract involves the manufacture of 10 specialized cable assemblies under NSN 6150-01-481-7447 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the assemblies according to drawings 195A666, 6009974, and 200415488, ensuring all markings adhere to MIL-STD-130. Performance will take place at Robins Air Force Base. Strict compliance with the Buy American Act and the Berry Amendment is required for all materials used. To be eligible, the manufacturer must hold ISO 9001:2015 or SAE AS9100 certification and maintain CMMC Level 2 security standards. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE, SPECIAL PURPOSE,

Solicitation # SPE7M2-27-T-0207

Solicitation SPE7M2-27-T-0207 is a total small business set-aside issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 5,806 feet of special purpose electrical cable, NSN 6145-01-203-5400. The material must be provided in nominal lengths of 2,000 feet per reel. Delivery is required within 185 days after receipt of order, with a need ship date of April 30, 2027, and an original required delivery date of February 5, 2028. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to military specifications, including MIL-DTL-12000 for preservation and packaging, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional components specified by NAVSEA. Offerors must comply with the Buy American Act and the Berry Amendment, and the use of additive manufacturing is prohibited unless specifically authorized. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc Anad

Same awarding agency

Freight Transportation to Anniston Army DepotThis subcontract involves the freight transportation and delivery of industrial machinery for prime contractors operating at the Anniston Army Depot. The scope of work requires the hauling of equipment weighing up to 670 lbs to Buildings 143, 409, and 433, with deliveries made FOB Destination. To comply with site safety regulations and prevent roadway debris, the contractor must utilize tarped trucks and coordinate all delivery appointments directly with the designated Anniston Army Depot point of contact. Managed under the Department of Defense via the W6QK Acc Anad agency, the project falls under NAICS code 484220. The performance of these services will take place within the 36272 zip code area. Interested parties should note the response deadline of November 9, 2026, for this specific transportation requirement.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Supply of Radia Brand Industrial Paint MixersThis subcontract with the Department of Defense involves the supply of Radia brand industrial paint mixing equipment for prime contractors operating at the Anniston Army Depot. The requirement consists of seven mixing units, including gyroscopic, multi-size, and vortex mixers, specifically featuring the 5025 Red D Mix Explosion-Proof model. All delivered equipment must include operator manuals and adhere to strict technical specifications, including 110V, 60 Hz power requirements. To ensure safety and compliance in industrial environments, the equipment must meet Class I, Division 1, Groups C and D explosion-proof certifications. Additionally, all units must comply with MIL-STD-129/130 marking standards. The project falls under NAICS code 423830 and is managed by the W6QK Acc Anad agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Radia Paint Shakers

Solicitation # W911KF27QA007

Solicitation W911KF27QA007 is a firm fixed price procurement for the delivery of brand-name Radia paint shakers to the Anniston Army Depot in Alabama. The requirement includes one explosion-proof five-gallon gyroscopic mixer, two multi-size mixers for containers ranging from one quart to five gallons, and four one-gallon vortex mixers. All equipment must meet 110V, 60 Hz power requirements, include operator manuals, and come with a one-year warranty. The Radia 5025 model specifically requires Class I, Division 1, Groups C and D explosion-proof certification. Delivery is required by December 30, 2026, to buildings 143, 409, and 433, with the contractor responsible for all transportation costs and the coordination of delivery appointments. The government will utilize a Lowest Price Technically Acceptable source selection process, evaluating offers based on price and a met/not met technical factor. A ten percent price evaluation preference is available for HUBZone small business concerns. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract includes stringent marking and labeling standards in accordance with MIL-STD-129 and MIL-STD-130, requiring unique item identifiers for high-value items and specific components. All proposals must be submitted electronically via the Procurement Integrated Enterprise Environment Solicitation Module by the specified deadline.

All Other Industrial Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

Haas CNC Replacement Parts SupplierThis subcontract opportunity is for a supplier to provide genuine Haas Automation, Inc. OEM replacement parts to prime contractors working on projects at the Anniston Army Depot. The scope of work includes the sourcing and delivery of critical CNC components such as spindles, servos, controllers, seals, and filters to support both routine maintenance and emergency repairs. All provided parts must strictly adhere to manufacturer specifications to ensure operational compatibility. To be eligible for this contract, the supplier must maintain status as an authorized Haas distributor. The project falls under NAICS code 423830 and is managed by the Department of Defense. Interested parties must submit their responses by December 3, 2026, for performance at the depot facility located in zip code 36201.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Certified Haas CNC Technician ServicesThis subcontract for Certified Haas CNC Technician Services supports prime contractors on US Army Anniston Army Depot facility projects. The scope of work involves performing annual preventative maintenance and emergency repairs on CNC machinery, specifically following Haas Automation, Inc. recommendations. Key technical requirements include conducting major maintenance checks, backing up machine parameters, and applying necessary software updates to ensure all equipment remains fully operational. To qualify, service providers must utilize Haas-certified technicians and employ manufacturer-approved diagnostic software. The successful contractor is responsible for delivering comprehensive maintenance reports upon completion of the work. This opportunity is associated with NAICS code 811310 and falls under the jurisdiction of the Department of Defense.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Preventative Maintenance and Repairs

Solicitation # W911KF27QA006

Solicitation W911KF27QA006 is a firm fixed price procurement for the preventative maintenance and emergency repair of Haas Computer Numerical Controlled CNC machines at the Anniston Army Depot in Alabama. The scope of work requires a certified technician to perform annual maintenance checks as recommended by Haas Automation, Inc., including backing up machine parameters and applying software updates. This sole-sourced procurement is directed to Phillips Corporation, though other organizations with similar capabilities may provide evidence to the contracting officer for future consideration. The contract structure consists of a base period from January 1, 2027, to December 31, 2027, with four subsequent one-year option periods extending through December 31, 2031. Performance is monitored by Anniston Army Depot personnel through physical inspections and document reviews. Payment is processed electronically via the Wide Area WorkFlow system, with contractors choosing between Government Smart Pay Credit Card or DFAS. The solicitation incorporates various FAR and DFARS clauses, including strict requirements for cybersecurity, the prohibition of covered defense telecommunications equipment, and adherence to service contract labor standards. All responses must be submitted electronically through the PIEE Solicitation Module.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Industrial Die Repair and ReplacementThis subcontract involves providing specialized repair and replacement services for industrial dies at the Anniston Army Depot for the Department of Defense. The scope of work includes the removal, repair, and re-installation of dies specifically compatible with 1,500 Ton Macrodyne and Minster metal forming presses. To maintain production quality, the contractor must possess high-level precision machining and tooling expertise, ensuring all repaired or new dies are fully delivered and installed within the presses. The opportunity is categorized under NAICS code 333513 and is managed by the W6QK Acc Anad agency. Interested parties must adhere to the response deadline of November 23, 2026. Performance of the contract will take place in the 36201 zip code area, supporting prime contractors on critical facility projects.

Machine Tool (Metal Forming Types) Manufacturing

POSTED

DEADLINE

OEM Replacement Parts for Metal Forming PressesThis subcontract involves the procurement and delivery of genuine OEM replacement parts and materials to support prime contractors working on projects at the Anniston Army Depot. The scope specifically focuses on sourcing components for Macrodyne, Minster, and Perfecto RD-84126 hydraulic presses to facilitate essential maintenance and emergency repairs. To ensure the preservation of equipment warranties, all supplied parts must meet or exceed original equipment manufacturer specifications. Managed by the Department of Defense under the agency W6QK Acc Anad, the contract falls under NAICS code 423830. The performance of the contract will take place in zip code 36201. Interested parties should note the response deadline of November 23, 2026, for this specialized supply requirement.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Metal Forming Hydraulic Press Maintenance and RepairThis subcontract for the Department of Defense involves providing on-site preventive maintenance and emergency repairs for prime contractors at the Anniston Army Depot. The scope of work focuses on the upkeep of 1,500 Ton Macrodyne and Minster metal forming presses, as well as Perfecto RD-84126 feeders, ensuring all services and visual inspections are conducted according to OEM procedures. The primary objective is to deliver fully operational machinery and comprehensive documentation of all completed maintenance tasks. Qualified personnel with specific experience in hydraulic press operations are required for this project. The opportunity is categorized under NAICS code 811310 and is located in zip code 36201. Interested parties should note the response deadline of November 23, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Metal Forming Press Preventative Maintenance, Emergency Repairs and Parts

Solicitation # W911KF27QA003

Solicitation W911KF27QA003 is a sole sourced procurement for NIDEC Minster Corporation to provide on-site preventive maintenance, unlimited emergency repair, and replacement parts for metal forming hydraulic press machines at the Anniston Army Depot in Alabama. The scope of work covers specific equipment, including a 1,500 Ton Macrodyne Metal forming Press, multiple Minster Metal forming Presses, and a Perfecto RD-84126 Feeder Coil. All services must be performed according to original equipment manufacturer procedures and guidelines. The contract structure consists of a one-year base period starting at award, with four subsequent one-year options, extending the potential period of performance through November 2031. The contractor is required to maintain significant insurance coverages, including 500,000 dollars for general and property damage liability and 100,000 dollars for workers compensation. Administrative requirements include electronic invoicing via Wide Area Workflow and strict adherence to installation security and safety protocols at the Anniston Army Depot. Evaluation for the award is based on a performance risk assessment of relevant past performance. The solicitation is unrestricted under NAICS code 811310, and responses must be submitted through the PIEE Solicitation Module by November 23, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Aera of Interest (AoI) Equipment rental and Facility Support (CSO-W911KF25SC002)

Solicitation # W911KF-25-S-C002-AoI014

The Army Contracting Command-Anniston Army Depot is seeking innovative commercial equipment rental and facility support solutions under Area of Interest AoI 014, part of the broader Commercial Solutions Opening solicitation W911KF-25-S-C002. The primary objective is to establish flexible and rapid access to operational, construction, industrial, and heavy equipment, including material handling, power generation, earthmoving, and climate control tools such as high-capacity dredge and trash pumps. These capabilities are essential to preventing depot bottlenecks, mitigating facility disruptions, and ensuring continuous production readiness at the Anniston Army Depot in Alabama. Authorized under 10 USC 3458 and DFARS Subpart 212.70, the procurement utilizes a multi-phased evaluation process consisting of a Solution Brief, a Presentation or Pitch, and a Commercial Solution Proposal. Awards will be based on Best Value, considering cost, quality, technical capability, and delivery schedule, and must be structured as fixed-price or fixed-price incentive contracts. Eligible respondents must possess a Unique Entity ID, maintain active registration in the System for Award Management and the PIEE invoicing system, and comply with the Buy American Act. Written solutions must be submitted via email by November 19, 2026, and should include a technical concept and a Rough Order of Magnitude price.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Climate Control & HVAC RentalThis subcontract opportunity involves the supply and installation of temporary climate control systems for prime contractors operating at the Anniston Army Depot facility under the Department of Defense. The scope of work includes the deployment of industrial HVAC units, portable heaters, and commercial cooling systems designed to maintain operational continuity and prevent disruptions during facility projects. Interested parties must be registered in SAM.gov and utilize the PIEE invoicing system for payments. The project is categorized under NAICS code 532412, with performance taking place in Anniston, Alabama. Responses are due by November 19, 2026, for the delivery of fully operational on-site climate control systems.

Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

61--CABLE,POWER,ELECTRI

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

61--CABLE,POWER,ELECTRI

Solicitation # SPE7M125T067R

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

CABLE ASSEMBLY, POWE

Solicitation # SPE4A6-25-R-XA56

Defense Logistics Agency

POSTED

over 1 year ago

CLOSED

6150 - Conductor Cables

Solicitation # N0018925Q0127

Navsup Flt Logistics Ctr Norfolk

POSTED

over 1 year ago

CLOSED

over 1 year ago

CABLE,SPECIAL PURPO

Solicitation # N0010425QBT24

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPMYM225Q1742

DLA Maritime - Puget Sound

POSTED

over 1 year ago

CLOSED

over 1 year ago

61--CABLE,SPECIAL PURPO

Solicitation # SPE7M125T9214

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

61--CABLE,SPECIAL PURPO

Solicitation # SPE7M125T078J

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

61--CABLE,SPECIAL PURPO

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

Specialized Wiring

NASA Shared Services Center

POSTED

over 1 year ago

DEADLINE

61--CBL ACTR/LOCK SIG

Solicitation # N0010424QNE14

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPMYM225Q1666

DLA Maritime - Puget Sound

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS