Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HYDROMETER, GRADUATE

Active
SPE2DH-26-T-5363Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of one each of a graduated hydrometer with an integrated thermometer for measuring liquid temperature, featuring a specific gravity range of 39 to 51, manufactured from soda lime glass with 0.1 increments, and compliant with ASTM specification 6H. The device is lead and mercury free and meets NIST certification standards. Packaging must adhere to DLA requirements and the Medical Marking Standard No. 1, superseding MIL-STD-129, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery via common carrier at the lowest cost to the designated delivery point. All items must be marked in accordance with medical marking standards and government identification must be removed from non-accepted supplies. The solicitation number is SPE2DH-26-T-5363, with a response deadline of July 28, 2026, and delivery required within 20 days after award. The product is identified by NSN 6630-01-687-6909 under a federal procurement managed by the Department of Defense's Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, and the solicitation may involve covered defense information.

General Info

Procure one ASTM 6H-compliant hydrometer with thermometer, lead/mercury-free, NIST-certified, per DLA and medical marking standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

UNIT 100284 BOX 1, FPO, AE, 09534, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HYDROMETER,GRADUATE
HYDROMETER,GRADUATE SCALE
FEATURES HYDROMETER WITH ENCLOSED THERMOMETER TO INDICATE TEMPERATURE OF
THE LIQUID UNDER TEST. LEAD AND MERCURY FREE; SPECIFIC GRAVITY RANGE
39-51; ASTM NUMBER 6H; SODA LIME GLASS; INCREMENTS 0.1;
CERTIFICATIONS/COMPLIANCE NIST
UNIT OF ISSUE EA (EACH)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
..
SPE2DH-26-T-5363
SECTION B
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6630-01-687-6909 Quantity: 1 EA Purchase Request: 7017560942QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
Precision Pressure Gauge Manufacturing & SupplyThe contract seeks the manufacture or supply of a military-specification pressure gauge identified by NSN 6685-01-131-8110, requiring full compliance with established material and performance standards for military applications. All units must be delivered in original, corrosion-free packaging to ensure integrity during transport and storage, and must meet all technical and quality requirements dictated by defense specifications. The solicitation is issued as a subcontract under NAICS code 334519 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to align with DoD procurement protocols.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, PRESSURThe contract specifies the procurement of a pressure transmitter identified by part number 2600331-1 and NSN 6685011136087, with a requirement for two units to be delivered within 115 days to Barstow, California, under solicitation SPE4A6-26-T-08LN. The item is source-controlled and must be manufactured and tested in accordance with limited rights data held by approved sources, primarily Senso-Metrics Inc. and Soco Technologies Inc., with no government-provided technical data; only vendors with access to this data or proven traceability to approved sources may quote. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, adopting zero non-conformances unless otherwise directed. Specific clauses mandate that critical attributes be verified at Level VII, major at IV, and minor at II with corresponding AQLs, while unspecified attributes are treated as major. The item is designated as a critical application component and must comply with drawing 2600331 Revision E dated June 15, 2012, with certain test requirements from specification 2600380 Rev B waived and soldering procedures left to manufacturer discretion. Packaging must adhere to DLA-specific standards per RP001 and MIL-STD-129, with hazardous materials following TQ Requirement IP025 per FED-STD-313 and nonhazardous materials conforming to ASTM D3951, ensuring DLA requirements override all other standards. Item markings must comply with RQ017 for physical identification, and all packaging must be palletized per DLA guidelines. The contract imposes Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment obligations and mandates Source Approval Request (SAR) documentation for any vendor seeking source approval. Delivery is FOB origin with zero quantity variance, inspected and accepted at destination. The unit of issue is each, priced at $2.00 per unit for a total value of $4.00, with delivery directed to the DLA Distribution Office in Barstow. The item is subject to strict compliance with documentation, cybersecurity, quality, and packaging mandates, and all contractual obligations take precedence over industry defaults.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIALThis contract specifies the procurement of a dial indicating pressure gage identified by part number SG4ND1HPWRANAG and NSN 6685012983789, with a quantity of 61 units to be delivered FOB origin within 315 days. The item is classified as a commercial item and is designated as a critical application item, requiring strict adherence to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date. Manufacturing and delivery must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including special marking code 05 for delicate instrument handling, and palletization in accordance with DLA packaging guidelines. Unit of issue is each, with no variance allowed in quantity, and inspection and acceptance occur at origin. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the item or its components, with exceptions permitted only for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise specified, and attributes are to be verified at predefined levels. Physical identification of the bare item must meet RQ017 requirements, and government identification must be removed from non-accepted supplies per RQ011. The contract includes a CDRL, and all technical data must conform to referenced specifications including MIL-G-18997E and DI-DRPR-80651. The solicitation is a total small business set-aside under NAICS code 334519, with point of contact information provided for inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSThis contract specifies the procurement of a GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATOR with NSN 6685011318107 and part number SC4MC30CWRCNA, under solicitation SPE4A5-26-T-301Z, with a total quantity of 125 units to be delivered FOB origin within 219 days. The item is classified as a critical application item and must comply with technical specifications outlined in MIL-G-18997E and quality assurance procedures QAP-106. Mandatory adherence to DLA packaging requirements, MIL-STD-2073-1E preservation methods, and MIL-STD-129 marking standards is required, including special marking as a delicate instrument. Mercury and mercury compounds are strictly prohibited in all phases of manufacturing, packaging, and preservation except for specific functional uses such as batteries, lighting, or instruments approved by NAVSEA, and portable devices containing mercury must include shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with no quantity variance permitted. Item Unique Identification is not required per the Service customer’s request. A separate first article test line item is included with one unit designated for testing; pricing for this line item is required, but no award will be made if the test is waived. The contract is a total small business set-aside under NAICS 334519, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with all referenced technical, quality, and environmental restrictions set forth in the DLA Master List of Requirements, and transportation logistics follow DLAD Proc Note C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
PRODUCTION LOT TESTINGThis contract pertains to the procurement of a PUSH SWITCH designated as NSN 5930-01-327-0031, classified as a Critical Application Item for Aircraft Launch and Recovery Equipment (ALRE). The item must be sourced exclusively from an approved supplier as determined by the Naval Air Warfare Center Aircraft Division at Lakehurst, with Offerors required to provide documentation proving source approval, such as a letter from NAVICP’s Engineering and Product Support Directorate. Serialization and full traceability are mandatory for every unit and its packaging, including scrappage records, and any attempt to rebrand or obscure original OEM markings is strictly prohibited. The item must comply with stringent technical and quality standards referenced from the DLA Master List, including SAE AS9100 for quality management, and must be marked per MIL-STD-129 with specific identifiers including contract number, NAWC CAGE code, part number, lot number, and manufacturer CAGE code. No ozone-depleting chemicals may be used, and mercury or mercury compounds are banned unless explicitly exempted for functional components such as batteries or sensors, with additional containment requirements for portable devices. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs, and non-conformances must result in zero acceptance unless contractually altered. The contractor must submit Production Lot Test reports, a Production Test and Inspection Report, and a Certificate of Quality Compliance; the Certificate of Conformance clause is not permitted. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, marked with special codes and palletized appropriately, with all items delivered FOB origin and inspected and accepted at origin. Delivery is scheduled for 338 days after contract award, with a firm fixed price and no quantity variance allowed. The item is part of a total small business set-aside, and all documentation referencing technical data, quality assurance provisions, and engineering drawings must be current and authoritative, with source-controlled drawings dictating marking and configuration requirements even if other sources are listed.
NUCLEAR REACTOR PROGRAM

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, PRESSUREThe contract is for a single pressure transducer, part number 47045921AB and NSN 6695145479509, sourced under a total small business set-aside solicitation issued by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 171 days of contract award, with FOB origin terms and final inspection and acceptance occurring at the destination, specifically the DLA Distribution facility in New Cumberland, Pennsylvania. All packaging must strictly adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 packaging requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The product is designated a critical application item and requires compliance with CMMC Level 2 self-assessment, while sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified in the contract. The unit of issue is each, with a fixed quantity of one unit and no variance permitted. The contract is under solicitation SPE4A5-26-T-302N, issued on July 21, 2026, with responses due by July 29, 2026, and the original required delivery date is set for May 2, 2027. The transducer must be shipped to the designated DLA distribution center, with transportation instructions governed by DLAD Proc Note C19 and C20. The supplier must ensure all labeling, marking, and documentation comply with federal procurement standards, including the use of the correct ANSI X12 unit of issue, and must maintain cybersecurity compliance through the CMMC Level 2 self-assessment. All performance and quality obligations are binding and non-negotiable, with the DLA Master List controlling over any general industry standards, and the contract mandates that government identification be removed from rejected items prior to return.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
TESTER, MATERIAL STRENGThe contract pertains to the procurement of one unit of a material strength tester identified by NSN 6635-00-755-4767 and part number 36-0690/02, sourced from ELE INTERNATIONAL LLC DBA SOILTEST. Delivery is required within 10 days to Fort Hood, Texas, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging mandated to comply with MIL-STD-2073-1E and marking governed by MIL-STD-129, including palletization per DLA packaging requirements. The item is not required to be uniquely identified, and no special marking is needed. Sampling for quality verification follows MIL-STD-1916 or an equivalent zero-based plan, with unspecified attributes treated as major and acceptance criteria demanding zero non-conformances unless otherwise stated. Technical and quality requirements are sourced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The shipment must be sent via fast, traceable means, excluding parcel post, and is directed to a specific tactical area facility under a RDD/ANMCS shipment designation. The contract was issued under solicitation SPE4A6-26-T-08RB with a required delivery date of July 15, 2026, and is managed by the Department of Defense’s ASC Commodity Division.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
STARTER, MOTORThe contract is for a starter motor identified by NSN 6110-01-196-6385, with a quantity of four units, under purchase request 7017527755. The solicitation number is SPE7M2-26-T-5701, posted on July 21, 2026, with responses due by August 3, 2026, and delivery is required 451 days after order. The item falls under NAICS code 334519 and is procured by the Department of Defense through the Nuclear Reactor Program. Performance is to occur in New Cumberland, Pennsylvania, zip code 17070-5002, with Alisha Blanton as the primary point of contact. Critical to this contract is the export control classification of the associated technical data, which is subject to either ITAR or EAR regulations. Disclosure of this data to foreign persons, including foreign nationals within the United States or overseas, is restricted without prior authorization from the Department of State or Commerce. Only DLA contractors with an approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and approved access through the DLA authority may receive this technical data. DFARS 252.225-7048 governs compliance with these restrictions.
NUCLEAR REACTOR PROGRAM

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
STARTER, MOTORThis contract specifies the procurement of one starter motor with NSN 6110-01-366-9638 under solicitation SPE7M0-26-T-014W, requiring delivery within five days of contract award to FPO AE 09588 aboard the USS TORTUGA LSD 46. The item must be furnished FOB origin with no variation in quantity allowed, inspected and accepted at destination per MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied. Packaging must comply with DLA’s procurement requirements, and shipment must be conducted via traceable means excluding parcel post, in accordance with DLA procedural notes C19 and C20. Sampling inspections must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified, and attributes are classified with verification levels or AQLs per defined standards. The supply must be free of intentional mercury or mercury compounds except in specific exempted applications like batteries, fluorescent lamps, or naval-specified instruments, with portable mercury-containing devices requiring dual containment as per NAVSEA 5100-003D. Technical and quality requirements are incorporated by reference from the DLA Master List, and the solicitation closes on August 3, 2026, with an original required delivery date of July 22, 2026. The point of contact for inquiries is Laurie Wassmuth of the Department of Defense, Maritime Supply Chain ESOC Buys.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
LAMP ASSEMBLYThe contract mandates the supply of 15 lamp assemblies with part number 220-419877-000 and NSN 6240012085912, classified as a critical application item, under solicitation SPE4A6-26-T-08LQ. Delivery is required within 171 days from the contract award date, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination in Phoenix, Arizona, where the item must be delivered to Arizona Industries for the Blind. All packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container codes, and marking must adhere to MIL-STD-129 with a special fragile designation. Palletization must meet DLA procurement packaging requirements, and the item must be shipped to the parcel post address provided, with transportation logistics governed by DLA procedural notes C19 and C20. Quality control is strictly defined by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major unless otherwise stated. Zero non-conformances are required in the sampled lot unless contract terms permit otherwise, and the manufacturer may use either attribute or variable inspection under MIL-STD-1916. Documentation for source approval must satisfy RC001, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on acquisition size. The item is subject to covered defense information guidelines, and government identification must be removed from non-accepted supplies per RQ011.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONALThe contract is for the procurement of a transducer, motional, identified by NSN 6695016339924 and part number 025-40106-005 from Johnson Controls Navy Systems, LLC, with an alternate part number 742CF0300DXDALS from AMETEK, Inc. A total of five units are required at a unit price of $5.00, for a total contract value of $25.00, with delivery scheduled 171 days after award under the solicitation SPE4A5-26-T-298U. All items must be delivered FOB origin and inspected and accepted at the destination, with no tolerance for quantity variance. Packaging must comply strictly with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, cushioning, and containerization, along with labeling per MIL-STD-129 featuring the special marking code 06 for delicate instruments and an upward arrow. The item is classified as a critical application item and is subject to DLA’s master list of technical and quality requirements referenced by R and I numbers. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and the contractor must adhere to regulations for the removal of government identification from non-accepted supplies. Delivery is mandated to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 17, 2027, though the original delivery deadline is March 1, 2027. The contract falls under the NAICS code 334519 and is issued by the Department of Defense’s ASC Supplier Oper OEM Division, with Marcus Williams as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
SWITCH, LIQUID LEVEL
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339114
New
DIBBS
DISH, MEDICAMENT, DENTALThe contract pertains to the procurement of 10 units of a glass dappen dish specifically designed for dental and medical use, identified by NSN 6520-01-700-5630. The dish measures 1-1/4 inches in outside diameter with a depth of 1 x 1-1/8 inches and is constructed from smooth, transparent, heat-resistant glass to prevent adhesion of dense materials such as acrylics, amalgams, resins, and sealants. It features a thick solid base for stability and spill protection but is not autoclavable, requiring cold sterilization only. The unit of issue is each, and delivery is scheduled within 81 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions based on solicitation or award dates. The procurement is subject to DLA packaging standards, requirements for removal of government identification from non-accepted supplies, and potential handling of covered defense information. The solicitation number is SPE2DH-26-T-5357, posted on July 21, 2026, with responses due by July 28, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, with performance directed to APO 96260-5479 and primary contact information provided for Craig Singleton. Bidders must clearly identify the source and part number being offered.
Dental Equipment and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
GUTTA PERCHA POINTSGuttapercha points for endodontic root canal therapy are being procured in assorted sizes 15 through 40, designed for use with .06 taper files in single cone obturation techniques. Each package contains 60 points, and the item is designated by NSN 6520-01-532-1818 with a total quantity of two packages. The product must comply with strict shelf-life requirements, mandating a non-extendable 24-month expiration period from manufacture. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date. Packaging must adhere to DLA procurement guidelines, and all supplies must be free of government identification if rejected. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DH-26-T-5355, has a response deadline of July 28, 2026, with delivery due within 84 days after award to APO zip code 96260-5479. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tara Quinty as the primary point of contact.
Dental Equipment and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DISPOSAL CONTAINER,The contract is for the procurement of 10 units of a disposal container specifically designed for the safe disposal of hypodermic needles and syringes, with dimensions between 6 to 7 inches in length and 1 to 2 inches in diameter, featuring a securable cap and a lift-off cover. The item is identified by NSN 6530-01-645-6923 and is part of a purchase request numbered 7017548716 with a total quantity requirement of 20 units to be delivered within 20 days of award. Technical and quality standards governing the product are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA packaging requirements, and government identification must be removed from non-accepted supplies. Covered defense information may apply, requiring appropriate handling and safeguarding. The solicitation number is SPE2DH-26-T-5351, issued on July 21, 2026, with responses due by July 28, 2026. The contracting office is under the Department of Defense's Medical Supply Chain FSH, with performance location at Fort Campbell, Tennessee, and primary point of contact Tina Vu, reachable via email and phone provided.
Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BALL, PHYSICAL THERAPYThe contract pertains to the procurement of BALL PHYSICAL THERAPY items identified by NSN 6530-01-699-5154 and part number LE9565, with a quantity of six units to be delivered within five days FOB destination. The unit price is $6.00 per unit, totaling $36.00, with no variance allowed in quantity. All items must comply with the latest edition of the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe transport at the lowest cost. Marking and palletization must follow strict DLA guidelines, and the items are not regulated by the FDA. Delivery is required to Rose Barracks, Building 728, AWCF SSF, Sudlager Straße, Vilseck, Germany, with the original required delivery date set for July 23, 2026. The solicitation number is SPE2DH-26-T-5345, issued by the Department of Defense under the NAICS code 339113, with Tina Vu listed as the primary point of contact. All technical and quality requirements referenced are governed by the DLA Master List, and shipping must comply with DLA Procurement Notes C19 and C20.
Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
COAT, MAN'S PAJAMAThis contract specifies the procurement of a man’s pajama coat in medium size, featuring a full-length coat style made from broadcloth fabric composed of cotton and polyester, with a snap fastener front and blue overall color. The unit of issue is each, and the item is identified by NSN 6532-00-081-1802 with a quantity of one unit ordered under purchase request 7017546135. Delivery is required within five days of award. The solicitation is part of a federal procurement under contract number SPE2DH-26-T-5360, posted on July 21, 2026, with responses due by July 28, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed prior to return. The procurement is administered by the Medical Supply Chain FSH under the Department of Defense, with Tina Vu listed as the primary point of contact.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334610
New
DIBBS
MEASURE, LIQUIDThe contract involves the procurement of three units of a liquid measuring device with the NSN 6640-01-650-1146, intended for use with the unmounted water purification unit identified as 4610-01-628-1081. Each unit is packaged in 250ml capacity and the entire requirement must be delivered within 20 days of award. Bidders are required to specify the source and part number being offered to ensure compliance with technical specifications. All technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a contract amendment supersedes it. The contract also mandates the removal of government identification from any non-accepted supplies. The solicitation number is SPE2DH-26-T-5347, with a response deadline of July 28, 2026, and the purchasing organization is the Medical Supply Chain FSH under the Department of Defense. The place of performance is Camp Pendleton, CA, 92055-5627, and primary point of contact is Tina Vu, reachable via email and phone as listed. The NAICS code for this procurement is 334610, indicating classification within instruments and related equipment manufacturing.
Manufacturing and Reproducing Magnetic and Optical Media

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
TEST PAPER AND COLOR C
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
GUTTA PERCHA POINTS
Dental Equipment and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BALL, PHYSICAL THERAPY
Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
WRAP AND LITTER, PAT
Alumina Refining and Primary Aluminum Production

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333415
New
DIBBS
BAND, EXERCISE, PHYSICAL
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
DIBBS
RACK, PLASMA BOX, LAB
All Other Industrial Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details