This Solicitation opportunity from Department Of Defense was posted on August 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
ID PLATE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
Solicitation SPEFA5-26-T-1054 is a request for quotations issued by DLA Aviation at Cherry Point, North Carolina, for the procurement of 35 units of ID Plates, identified by NSN 9905LNC14456 and part number 99-5000-70. The requirement is managed under NAICS code 488190, with a required delivery date of October 8, 2026, and a delivery lead time of 13 days after order. Delivery, inspection, and acceptance are all set as FOB Destination, with shipping directed to the Fleet Readiness Center DLA in Cherry Point, NC. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Technical and quality requirements are governed by the DLA Master List, specifically referencing RA001 and RQ017 for physical identification and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific acceptance quality levels assigned for critical, major, and minor attributes. Administrative requirements include the use of Wide Area Workflow for invoicing and compliance with DFARS and FAR clauses regarding the Buy American Act, cybersecurity reporting, and equal opportunity for workers with disabilities. All quotes must be submitted via the DIBBS portal by September 8, 2026.
General Info
Place of Performance
PSC 8021, CHERRY POINT, NC, 28533-0021, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
ID PLATE
ORGANIC MANUFACTURE:
CAGE:96916,FRC-EAST
P/N:99-5000-70
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
PESCO DIV BORG-WARNER CORP 77200 P/N 99-5000-70
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPEFA5-26-T-1054
SECTION B
PR: 7018128748 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018128748 0001 EA 35.000
NSN/MATERIAL:9905LLNC14456
DELIVERY (IN DAYS):0013
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
PSC 8021
CHERRY POINT NC 28533-0021
US
FREIGHT SHIPPING ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
BEACHEY ROAD, BUILDING 148, BAY C
CHERRY POINT NC 28533-5040
US
Need Ship Date:00/00/0000 Original Required Delivery Date:10/08/2026
SPEFA5-26-T-1054 NSN/Part Number: 9905-LL-NC1-4456 Quantity: 35 EA Purchase Request: 7018128748QTY: 35 Delivery: 13 days ADO
More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS