Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from Tennessee was posted on July 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Impact Sockets

Closed
Z4777State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510
New
SLED
BABAA Compliant Reclamation Materials SupplierThis subcontract opportunity is for a supplier to provide specialized reclamation materials for prime contractors working on Virginia Department of Energy projects. The required supplies include 1/4 inch and 5/16 inch galvanized steel wire rope, galvanized earth and rock anchors from MacLean Power Systems or an equivalent brand, and certified seed and agricultural limestone. All materials must be delivered directly to the project site located in Blacksburg, Virginia. A critical requirement for this contract is the provision of formal certification ensuring all materials comply with the Build America, Buy America Act. Interested parties must submit their responses by November 2, 2026, to be considered for this procurement under NAICS code 332510.
Virginia Department of Energy

POSTED

about 15 hours ago

DEADLINE

in 5 days
NAICS: 332510
New
DIBBS
Supply of Mounting Brackets (NSN 5340017253800)
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332510
New
DIBBS
Supply of Hoisting Links (NSN 3940-01-690-0447)This subcontract involves the procurement of four specialized hoisting links under NSN 3940-01-690-0447 for the Department of Defense. The selected provider is responsible for manufacturing or sourcing these components to meet exact technical specifications, ensuring all products are free of prohibited materials. Required deliverables include comprehensive OEM or distributor documentation, including valid CAGE codes, to verify authenticity and compliance. The contract is categorized under NAICS code 332510 and is managed by Construction & Equipment Manu & Con. Performance of the contract is centered in zip code 34088. Interested parties must adhere to the timeline established by the posting date of October 27, 2026, with a final response deadline of November 2, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 5 days
NAICS: 332510
New
DIBBS
Supply of Spring Tension Washers (NSN 5310-01-052-1798)
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 332510
New
DIBBS
Precision Forging and Fabrication of Angle Brackets
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332510
New
DIBBS
Precision Manufacturing of Solid RivetsThis subcontract involves the precision manufacturing of five pounds of specialized solid rivets for the DLA Weapons Support ASC Commodities Division. The fabrication process must strictly adhere to Basic Drawing NR 43999 LD121-0009, Revision B and TDP Rev A Gen 2, utilizing precision machining and forming equipment to meet exact specifications. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality systems and hold certification under the US/Canada Joint Certification Program. Additionally, the provider must be authorized to handle ITAR or EAR export-controlled data. The performance of this contract is centered in New Cumberland, Pennsylvania, with a response deadline of November 4, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 332510
New
DIBBS
Supply of Driveshaft Compression Components
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332510
New
DIBBS
Supply of Self-Locking Plate Nuts (NSN 5310012672877)
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 332510
New
DIBBS
Supply of Turnlock Fastener Studs
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 332510
New
DIBBS
Cylindrical Roller Bearing Manufacturing (NSN 3110-01-203-1707)This subcontract involves the manufacture of two finished and inspected cylindrical roller bearings under NSN 3110-01-203-1707 for the DLA Weapons Support ASC Supplier OEM Division. The project requires fabrication according to Drawing 9341M38 Revision F and Limited Rights Data specifications, necessitating the use of precision grinding and machining equipment to achieve aerospace-grade tolerances. Performance will take place at Tinker AFB. The selected provider must maintain SAE AS9100 compliance and strictly adhere to the Berry Amendment and the Buy American Act. Interested parties must respond by November 4, 2026, for this Department of Defense requirement categorized under NAICS code 332510.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 332510
New
DIBBS
Snap Hook Supplier (NSN 5340-01-499-4157)
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
NAICS: 332510
New
DIBBS
Supply of Swivel, Link and Jaw (NSN 4030-01-658-1156)
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The contract solicits five distinct impact sockets with a 1/2 inch square drive, each featuring a 12-point, deep well design and a hole for a positive locking pin to ensure secure engagement under high-torque conditions. The sockets vary in opening sizes ranging from 5/8 inch to 1 inch, with quantities specified as five, four, seven, eleven, and one unit respectively for each size. Approved manufacturers include Wright, Snap-on, and Proto, with specific part numbers listed for each socket size to ensure compatibility and quality standards. All items fall under the same NES Group/Class category and are identified by unique item numbers and identifiers for tracking and fulfillment. The total quantity required across all socket sizes is 28 units. This solicitation, issued by Nashville Electric Service in Tennessee under reference number Z4777, is open for responses until July 15, 2026, with the posting date listed as July 9, 2026. The procurement is classified under a SLED organization type and is intended for performance in Nashville, Tennessee. Primary point of contact for inquiries is Alan Martinez, reachable via email and phone for procurement-related matters. The contract does not specify a set-aside designation or NAICS code, and the solicitation is accessible through the vendor portal hosted by Nashville Electric Service for interested suppliers to review requirements and submit bids.

General Info

Five 1/2-inch square drive impact sockets, 12-point deep well, 5/8 to 1 inch sizes, 28 total units, approved manufacturers Wright Snap-on Proto.

Agency

Tennessee → Nashville Electric Service

NAICS

332510 - Hardware Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

1

RFB Z4777 Impact Sockets Procurement

PDF, High priority: read this firstrfb
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / AgencyTennessee → Nashville Electric Service
Office AddressNashville, TN, USA
Contacts
Alan MartinezProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SOCKET IMP 1/2 - 5/8 12 PT DW IMPACT SOCKET, 5/8" OPENING, 1/2" SQUARE DRIVE, 12 POINT, DEEP WELL, HOLE FOR POSITIVE LOCKING PIN. Approved Manufacturers and/or Part Numbers: WRIGHTT4970 SNAPONSIMD200A PROTOJ7320 Item Description: The NES Group/Class for this item is: Item Id: Item Number: Quantity: UOI: 5EA ET45285026308 2 SOCKET IMP 1/2 - 3/4 12 PT DW IMPACT SOCKET, 3/4" OPENING, 1/2" SQUARE DRIVE, 12 POINT, DEEP WELL, HOLE FOR POSITIVE LOCKING PIN. Approved Manufacturers and/or Part Numbers: WRIGHTT4974 SNAPONSIMD240A PROTOJ7324 Item Description: The NES Group/Class for this item is: Item Id: Item Number: Quantity: UOI: 4EA ET45285026312 3 SOCKET IMP 1/2 -7/8 12 PT DW IMPACT SOCKET, 7/8" OPENING, 1/2" SQUARE DRIVE, 12 POINT, DEEP WELL, HOLE FOR POSITIVE LOCKING PIN. Approved Manufacturers and/or Part Numbers: WRIGHTT4978 SNAPONSIMD280A PROTOJ7328 Page: RFB: Close Date: Z47777/15/2026 2 Item Description: The NES Group/Class for this item is: Item Id: Item Number: Quantity: UOI: 7EA ET45285026314 4 SOCKET IMP 1/2 - 15/16 12 PT DW IMPACT SOCKET, 5/16" OPENING, 1/2" SQUARE DRIVE, 12 POINT, DEEP WELL, HOLE FOR POSITIVE LOCKING PIN. Approved Manufacturers and/or Part Numbers: WRIGHTT4980 SNAPONSIMD300A PROTOJ7330 Item Description: The NES Group/Class for this item is: Item Id: Item Number: Quantity: UOI: 11EA ET45285026316 5 SOCKET IMP 1/2 - 1 12 PT DW IMPACT SOCKET, 1" OPENING, 1/2" SQUARE DRIVE, 12 POINT, DEEP WELL, HOLE FOR POSITIVE LOCKING PIN Approved Manufacturers and/or Part Numbers: WRIGHTT4982 SNAPONSIMD320A PROTOJ7332

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 484220
New
SLED
Specialized Flatbed/Open-Top Transport for Steel PolesThis subcontract involves the specialized transport of five 30-foot steel poles for prime contractors working on Nashville Electric Service projects in Nashville. The selected provider must utilize an open-top vehicle to facilitate efficient unloading and is strictly required to keep the poles wrapped throughout transit to protect the factory-applied dark bronze finish. The primary objective is the delivery of the shafts to the designated site in a condition that preserves the integrity of the factory finish. This opportunity falls under NAICS code 484220, with a response deadline set for November 3, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332323
New
SLED
Supply of Standard Steel Square Straight Shafts (30')This subcontract involves the manufacture and delivery of five 30-foot standard steel square straight shafts for prime contractors working on Nashville Electric Service projects in Nashville. Each shaft must be constructed with four-hole anchor bases, two detachable 2 inch IPS horizontal tenons, and a factory-applied dark bronze finish. To ensure structural integrity, all poles are required to comply with NESC 90 MPH wind load requirements. The completed shafts must be delivered wrapped to protect the finish. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 3, 2026.
Ornamental and Architectural Metal Work Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
SLED
Steel Pole
Solicitation # Z5432
Nashville Electric Service has issued Request For Bid Z5432 for the procurement of five 30-foot standard steel square straight shafts. The poles must feature a four-hole anchor base with a bolt circle between 10.5 and 11.5 inches, base nut covers, and a hand hole access of at least 3.5 by 5 inches with a cover. Each shaft must be factory-applied in dark bronze and equipped with two detachable 2-inch IPS horizontal tenons for luminaire mounting. Technical requirements specify that the poles must comply with the NESC 90 MPH wind load requirement and possess the strength to support two 50lb fixtures at 180 degrees with an EPA of 2.5 square feet each on a 10-inch arm. Bids must be submitted via the Bid Center by 2:00 pm local time on November 3, 2026. Only approved brands, specifically Hapco and Lytepole, are acceptable, and alternate brands will not be considered. To ensure quality and ease of unloading, poles must be wrapped to protect the finish during shipment and delivered using an open-top vehicle. Vendors are required to state their earliest delivery in calendar days, as delivery time may be a factor in the award decision. The primary procurement contact for this solicitation is Shanna Faulk.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
SLED
Supply of Figure 8 Swing Links (30K lbs)This subcontract agreement involves the supply of forged steel Figure 8 swing chain links for prime contractors working under Nashville Electric Service contracts. The required components must feature two 7/8 inch eyes, possess an ultimate strength of 30,000 pounds, and be galvanized in accordance with ASTM A123 standards. All deliverables must strictly adhere to specified brand and part number requirements for ItemId 182574500. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must respond by October 29, 2026, regarding this procurement categorized under NAICS code 332510.
Hardware Manufacturing

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 423830
New
SLED
Supplier of 3M Safety Walk Anti-Slip RollsThis subcontract agreement involves the procurement and delivery of industrial anti-slip safety walking surfaces for prime contractors serving the Nashville Electric Service in Tennessee. The scope of work specifically requires the supply of 3M-AUTO 19282 Safety Walk Black Medium Grade rolls, or an approved equivalent, measuring 6 inches by 60 feet. The selected supplier is responsible for the physical delivery of the grip tape rolls to the designated facility in Nashville, ensuring strict adherence to established delivery timelines. This opportunity is categorized under NAICS code 423830 and is managed through the Nashville Electric Service vendor portal.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 334418
New
SLED
Supply of 3P.S.T. Back Connected Knife SwitchesThis subcontract involves the supply and delivery of industrial electrical knife switches for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work specifically requires the provision of AVO MULT MTS S-203-D-B units configured as 3P.S.T. back connected. These units must include BC barriers, ganged handles, dividers, and TBT-26 long studs, though mounting bars are excluded from the delivery requirements. The procurement is categorized under NAICS code 334418. Interested parties should note that the posting date is October 23, 2026, with a response deadline set for October 30, 2026. All physical 3P knife switch units must be delivered in accordance with the specified technical configurations to support the agency's infrastructure projects.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 314121
New
SLED
Lineman's Rubber Glove ProtectorsThis subcontract involves the manufacture and supply of size 9 leather protector gloves for prime contractors working on Nashville Electric Service safety equipment projects. The gloves must be designed for use with 5,000 volt rubber gloves and strictly adhere to Federal Specification KK-L-170C and ASTM Specification F696-91. Each pair must be individually plastic-bagged and stamped on the cuff with the rubber glove hand size, the manufacturer name, and the NES designation. The scope of work requires the delivery of 24 pairs of these marked protector gloves to Nashville. This opportunity is categorized under NAICS code 314121 and is managed by the Nashville Electric Service in Tennessee. Interested parties should note the response deadline of October 30, 2026.
Curtain and Drapery Mills

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
SLED
Flatbed Hauling and Unloading ServicesThis subcontract for Flatbed Hauling and Unloading Services involves the transportation and delivery of 400 utility poles to various yards in Nashville, Tennessee, in support of Nashville Electric Service utility projects. The selected provider will perform truck freight transportation using flatbeds, with operations scheduled between 6:30 AM and 2:30 PM CST. The scope of work requires the use of specialized equipment for on-site unloading, including crane trucks, knuckle booms, or heavy-duty forklifts. To qualify, personnel must possess a valid CDL and proper equipment operator certification. Interested parties must respond by November 5, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 321911
New
SLED
Treated Wooden Utility Pole SupplierThis subcontract agreement establishes the requirements for a supplier to provide treated wooden utility poles for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work involves the manufacture and delivery of 400 40-foot Class 4 poles constructed from either Douglas Fir or Southern Pine. All materials must adhere strictly to NES Specifications 33-151R13 or 33-252R10. The supplier is responsible for the complete production process, including roofing and gaining according to NES Drawing 910 and the application of necessary chemical preservation treatments. The contract concludes upon the successful delivery of the 400 finished and processed poles. Interested parties must respond by November 5, 2026.
Wood Window and Door Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 332312
New
SLED
Steel Utility Pole Supplier (60ft Class H3)This subcontract agreement establishes the requirements for a supplier to provide hot-dipped galvanized steel poles for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing 60-foot poles that meet Class H3 equivalent standards, specifically maintaining a minimum capacity of 0243 ft-kips at ground level. The scope of work includes providing 1 inch jacking nuts and bolts for both the top and bottom halves of the poles, with a strict construction limit of no more than two sections. The selected supplier is responsible for the final delivery of the finished steel poles to Nashville Electric Service.
Fabricated Structural Metal Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
SLED
Flatbed Delivery ServicesThis subcontract for Flatbed Delivery Services involves the transportation of 200 fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects. The selected provider will be responsible for hauling these units from the manufacturer to designated delivery points in Nashville using an open flatbed truck or trailer as specified in the statement of work. To qualify for this engagement, the contractor must possess standard commercial trucking licenses and the required insurance coverage. The solicitation was posted on October 23, 2026, with a response deadline of November 3, 2026. This project falls under NAICS code 484220 for specialized freight trucking.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 326121
New
SLED
Tubular Fiberglass Crossarm SupplierThis subcontract agreement establishes the supply of 200 ten-foot tubular fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing components that adhere to NES Specification ESI-4-E, with dimensions ranging from 3 1/2" x 4 1/2" to 5" x 7". The scope of work includes the provision of braceless mounting assemblies utilizing two 5/8" diameter bolts with vertical spacing of either 8" or 12". The contract is categorized under NAICS code 326121 and requires the delivery of the full quantity of crossarms and their corresponding mounting assemblies.
Unlaminated Plastics Profile Shape Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332510
Closed
SLED
Anchor Wedge
Solicitation # Z473
Nashville Electric Service

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 332510
Closed
SLED
Clevis Thimbleye Large
Solicitation # Z4736
Nashville Electric Service

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 332510
Closed
SLED
USM SSP 26_031 Notice of Proposed Sole Source Purchase of Electro-Hydraulic Winch. http://www.ms.gov/dfa/contract_bid_search/Bid RFx: 3150006897 Comments/objections will be received as required per Section 31-7-13 (C) of the Mississippi Code until 8:00
Solicitation # 9280-27-R-RFIN-00033
UNIVERSITY of SOUTHERN MISSISSIPPI

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332510
Awarded
SLED
7004-CHACI-38-102-S1-CRAFTMASTER HARDWARE-Deadbolt
Solicitation # C7603E
Department Of Corrections

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332510
Awarded
SLED
7004-CHACI-38-102-S1-CRAFTMASTER HARDWARE-Mortise
Solicitation # C75EC4
Department Of Corrections

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332510
Closed
SLED
Door & Access Hardware Supply and Installation
City of Santa Rosa, California - Capital Projects Engineering Division

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332510
Closed
SLED
Emergency Access Lock Box Supply and Installation
MHA - Administration/Maintenance

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 332510
Awarded
SLED
DOT 231 DO Door Closers
Solicitation # EP556464
Department Of Transportation

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332510
Closed
SLED
Door and Access Control Hardware Supply and Installation
San Bernardino City

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332510
Closed
SLED
IFB 160963 Statewide Bridge Lugs
Solicitation # IFB-122256
Virginia Department of Transportation

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 332510
Closed
SLED
Approved Brand-Compliant Assembly and Kitting
Nashville Electric Service

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 332510
Closed
SLED
Blanket Clamp
Solicitation # Z4619
Nashville Electric Service

POSTED

5 months ago

CLOSED

4 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS