Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

IMPELLER AND SHAFT

Active
N6883619Q0181Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The government intends to award a firm-fixed-price contract on a sole-source basis to Curtiss-Wright Electro-Mechanical Corporation for the supply of specific commercial items, namely impellers and a shaft, for the Trident Refit Facility at Naval Submarine Base, Kings Bay, Georgia. This procurement is conducted under the authority of 10 U.S.C. 2304(c)(1) and follows the simplified acquisition procedures outlined in FAR Part 12 and 13. The solicitation will not be competitively bid, and no written solicitation will be issued; instead, Curtiss-Wright is requested to submit a proposal consisting of separate technical and price volumes via email by May 14, 2019. Pricing must include a detailed breakdown of direct and indirect costs and comply with detailed government provisions incorporating numerous FAR and DFARS clauses relevant to commercial item acquisitions, subcontracting, and compliance requirements. Award will be made on a Lowest Price Technically Acceptable (LPTA) basis, with technical acceptability defined by the absence of exceptions to solicitation terms. The contract requires registration in the System for Award Management (SAM) and compliance with electronic invoicing procedures through the Wide Area Workflow (WAWF) system for payment processing. The Contracting Officer retains exclusive authority for contract modifications, and all communications concerning this acquisition should be directed to the designated contracting officer contact via email by the specified deadline. The procurement includes adherence to multiple compliance, reporting, and regulatory clauses to safeguard the government’s interests, ensure fair labor practices, and maintain security protocols.

General Info

Sole-source fixed-price contract to Curtiss-Wright for impellers and shaft, LPTA award.

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

Place of Performance

FL

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Jacksonville
ContactsNo contacts available
OfficeJACKSONVILLE, FL, 32212-0097, USA
Office AddressJACKSONVILLE, FL, 32212-0097, USA
ContactsNo contact information available

Full Description

Show more
This is a notification of the Governments intent to award a firm fixed price contract on the sole source basis for a commercial item prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. The proposal is being requested and a written solicitation will not be issued. Naval Supply System Command (NAVSUP) Fleet Logistic Center Jacksonville (Kings Bay Det), 930 USS Hunley Ave, Kings Bay, GA 31547, intends to solicit a single source, to Curtiss-Wright Electro-Mechanical Corporation, under the authority of 10 U.S.C. 2304(c)(1) as implemented by Federal Acquisition Regulation (FAR) 13.106-1(a)(2)(i), only one responsible source. This is not a request for competitive proposals/quotes. Responsible sources may submit a capabilities statement, which shall be considered by the agency. A determination by the Government not to compete based upon responses to this notice is solely within the discretion of the Government. Questions concerning this notice may be directed to Lee Tyson at contact@example.gov by 5/14/2019 at 1200hrs, Eastern. This solicitation, N68836-19-Q-0181, is issued as a Request for Proposal (RFP) directly to Curtiss-Wright Electro-Mechanical Corporation. This is for the Trident Refit Facility, Naval Submarine Base, Kings Bay, GA. Proposal Requirements (Technical and Price): The offeror shall submit their proposal directly via e-mail to Lee Tyson at contact@example.gov. b. A completed proposal shall consist of a signed cover letter stating submittal of an offer in response to the solicitation and separate Technical (I) and Price (II) Volumes. 1) Price Volume shall consist of the following: Provide a summary pricing below in the pricing schedule: ITEM NO SUPPLIES/SERVICES U/I QTY AMOUNT EXTENDED: 0001 Impellers, P/N: F-4X9H3AX1, QTY - 5 EA 0002 Shaft, P/N: F-4X9H10X2, QTY - 1 EA In addition to summary pricing, provide a complete price and cost breakdown of summary pricing. Price and cost breakdown shall include direct and indirect costs; labor costs, subcontractor proposal costs, material costs, overhead and general and administrative expenses. The following provisions apply to this acquisition: 52.204-7 System for Award Management, as prescribed in FAR 4.1105(a)(1) 52.204-10 Reporting Executive Compensation 52.204-13 SAM Maintenance 52.204-16 Commercial and Government Entity Code Reporting, as prescribed in FAR 4.1804(a) 52.204-17 Ownership or Control of Offeror, as prescribed in FAR 4.1804(b) 52.204-18 Cage Maintenance (July 2016) 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations, as prescribed in FAR 9.108-5(b) 52.212-1 Instructions to Offerors - Commercial Items 52.212-3 and its ALT I, Offeror Representations and Certifications - Commercial Items; 52.212-4 Contract Terms and Conditions - Commercial Items Use with its ALT I, when a time and materials contract is anticipated; 52.219-6 Notice of Total Small Business Set-Aside (Nov 2011) 52.222-3 Convict Labor, as prescribed in FAR 22.202 52.222-19 Child Labor—Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-36 Affirmative Action for Workers with Disabilities 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran 52.232-33 Payment by Electronic Funds Transfer SAM 52.232-39 Unenforceability of Unauthorized Obligations, as prescribed in FAR 32.706-3 52.239-1 Privacy or Security Safeguards 52.252-1Solicitation Provisions Incorporated by Reference, as prescribed in FAR 52.107(a) 52.252-2 Clauses Incorporated by Reference, as prescribed in FAR 52.107(b) 52.222-50 Combating Trafficking in Persons (March 2015) 52.233-3 Protest After Award Quoters shall include a completed copy of 52.212-3 and it’s ALT I with quotes. All clauses shall be incorporated by reference in the order. Additional contract terms and conditions applicable to this procurement are: 252.203-7000 Requirements Relating To Compensation of Former DoD Officials 252.203-7002 Requirements to Inform Employees of Whistleblower Rights, as prescribed in DFARS 203.970 252.203-7005 Representation Relating To Compensation of Former DoD Officials 252.204-7003 Control of Government Personnel Work Product, as prescribed in DFARS 204.404-70(b) 252.204-7004 alternate A, System for Award Management, as prescribed in DFARS 204.1105 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls, as prescribed in DFARS 204.7304(a) 252.204-7011 Alternative Line Item Structure 252.204-7012 Safeguarding of Unclassified Controlled Technical Information 252.204-7015 Disclosure of Information to Litigation Support Contractors 252.213-7000 Notice to Prospective Suppliers on Use of PPIRS-SR in Past Performance Evaluations JUN 2015 252.225-7048 Export-Controlled Items, as prescribed in DFARS 225.7901-4 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports 252.232-7006 Wide Area Workflow Payment Instructions 252.232-7010 Levies On Contract Payments 252.243-7001 pricing of Contract Modifications, as prescribed in DFARS 243.205-70 252.244-7000 Subcontracts for Commercial Items and Commercial Components (DoD Contracts) 252.247-7023 Transportation of Supplies by Sea, as prescribed in DFARS 247.574(b) and (b)(1) 252.225-7001 Buy American Act and Balance of Payments Program (Aug 2016) 252.225-7002 Qualifying Country Sources as Subcontractors (Aug 2016) SUPTXT243-9400 (1-92) Authorized Changes Only by the KO (Feb 2008) 52.212-2 EVALUATION—COMMERCIAL ITEMS (OCT 2014) This Request for Quote is prepared in accordance with FAR Part 12 Commercial Items and FAR Subpart 13.5 Simplified Procedures for Certain Commercial Items. The Government will award a contract resulting from this solicitation to the responsible Offeror whose Offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate quotes: Award Consideration The Government will make a single award using the Lowest Price Technically Acceptable (“LPTA?). The Government intends to award on initial quotes but reserves the right to conduct discussions. Technical Acceptability To be determined technically acceptable, the Offeror must submit a signed quote, stating the Offeror does not take exception to any terms of the solicitation. The Contracting Officer will use the following rating table: Rating Description Acceptable Quote does not take exception to any term of the Solicitation and therefore clearly meets the Requirements of the solicitation. Unacceptable Quote takes exception to a solicitation term(s) and Therefore; does not clearly meet the requirements of the Solicitation. Pricing Pricing will be evaluated based on total price provided in a fully completed price quote (see 52.212-1). The Government may determine that an Offeror’s quote is unacceptable if the prices are significantly unbalanced. Failure to furnish the price quote in accordance with the instructions above shall render the quote unacceptable. 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es): FAR Provisions:http://acquisition.gov/far/ DFARS Provisions: http://www.acq.osd.mil/dpap/darspgi/current/ (End of Provision) 52.252-2 CLAUSES INCORPORTED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): FAR Clauses: http://acquisition.gov/far/ DFARS Clauses: http://www.acq.osd.mil/dpap/dars/dfarspgi/current/ (End of clause) +1 (555) 000-0000 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)? is a six position code that uniquely identifies a unit, activity, or organization. “Document type? means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). “Local processing office (LPO)? is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall— (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training? link on the WAWF home page at https://wawf.eb.mil/ (e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). ____________2-IN-1_______________________________________________ (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. __________________GOVERNMENT________________________________ (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC Issue By DoDAAC Admin DoDAAC Inspect By DoDAAC Ship To Code Ship From Code Mark For Code Service Approver (DoDAAC) Service Acceptor (DoDAAC) Accept at Other DoDAAC LPO DoDAAC DCAA Auditor DoDAAC Other DoDAAC(s) (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications? field of WAWF once a document is submitted in the system. ______________________TBD_____________________________________ ________________________________________________________________ (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact. TBD (2) For technical WAWF help, contact the WAWF helpdesk at +1 (555) 000-0000. (End of clause) SUPTXT243-9400(1-92) AUTHORIZED CHANGES ONLY BY THE CONTRACTING OFFICER (a) Except as specified in paragraph (b) below, no order, statement, or conduct of Government personnel who visit the Contractors facilities or in any other manner communicate with Contractor personnel during the performance of this contract shall constitute a change under the Changes clause of this contract. (b) The Contractor shall not comply with any order, direction or request of Government personnel unless it is issued in writing and signed by the Contracting Officer, or is pursuant to specific authority otherwise included as a part of this contract. (c) The Contracting Officer is the only person authorized to approve changes in any of the requirements of this contract and notwithstanding provisions contained elsewhere in this contract, the said authority remains solely with the Contracting Officer. In the event the Contractor effects any change at the direction of any person other than the Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made in the contract price to cover any increase in charges incurred as a result thereof. The address and telephone number of the Contracting Officer is: NAME: Contracting Officer ADDRESS: NAVSUP FLCJ TELEPHONE: TO BE PROVIDED UPON AWARD System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. Please send proposal via e-mail to: Lee Tyson at contact@example.gov by 1200hrs (Eastern) on 14 MAY 2019. For any questions, please contact Lee Tyson by e-mail. NO PHONE CALLS WILL NOT BE ACCEPTED. Contracting Office Address: NAVSUP Fleet Logistic Center Jacksonville (FLCJ) Acquisition Department 930 USS Hunley Ave Bldg 2012 Kings Bay, GA Purchasing Agent: Lee Tyson Email: contact@example.gov NECO Footer

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
VALVE, FUEL SYSTEM
Solicitation # SPE7L4-27-U-0063
Solicitation SPE7L4-27-U-0063 is a total small business set-aside request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of fuel system valves, NSN 2910015963704. This requirement is designated as a critical application item with an estimated quantity of 8 units. The procurement may result in a unilateral indefinite delivery contract with a one-year term or until a maximum aggregate value of 350,000.00 is reached. The contract includes a guaranteed minimum quantity of one unit, with an estimated two orders per year. Delivery is required within 112 days after order, shipping to various CONUS and OCONUS DLA depots. Qualified suppliers must submit electronic quotes via the DIBBS portal by October 29, 2026. Award will be based on price evaluation of qualified suppliers and may be processed as an automated award. Technical requirements include compliance with RA001 and a prohibition on additive manufacturing unless authorized. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. The contract is fixed-price, requiring the use of the Wide Area WorkFlow system for invoicing and receiving reports. Inspection and acceptance will occur at the destination per FAR 52.246-1. All offerors must comply with the Buy American Act, Berry Amendment, and cybersecurity standards under DFARS 252.204-7012.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 336310
New
DIBBS
PLUNGER ASSEMBLY, FU
Solicitation # SPE7L5-27-T-0439
Solicitation SPE7L5-27-T-0439 is a request for quotations issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of eight fuel injector plunger assemblies, identified by NSN 2910410031049. This item is classified as a commercial off the shelf critical application item, with associated part numbers Z021015-0 from Steyr Motors AG and 135519 from URO Vehiculos Especiales SA. The required delivery date is May 1, 2027, with a delivery window of 172 days after the order. Shipping is set as FOB Origin, with the destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and technical standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. It incorporates several DLA master list requirements, such as RP001 for packaging, RQ011 for the removal of government identification from non-accepted supplies, and RQ017 for bare item marking. Additionally, the use of Class I ozone depleting chemicals is strictly prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity reporting standards for covered defense information, and HUBZone price evaluation preferences.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Jacksonville

Same awarding agency

NAICS: 332323
Federal
Precision Metal Framing and Housing FabricationThe contract involves the fabrication of precision metal frames and enclosures specifically designed for the Heated Window Assembly, ensuring the components meet exacting standards for structural integrity and seamless integration into naval vessel systems. The work requires advanced manufacturing capabilities to produce components that are compatible with the demanding environmental and operational conditions of naval platforms, with strict attention to dimensional accuracy, material specification, and durability. The frames and housings must be engineered to support heating functionality while maintaining mechanical stability under vibration, thermal cycling, and corrosive sea exposure. Performance of the work is designated to take place in Jacksonville, Florida, with the contract issued under the NAICS code 332323 for fabricated metal product manufacturing. This is a subcontract arrangement within the Department of Defense procurement ecosystem, administered by Naval Supply Systems Command Fleet Logistics Center Jacksonville. The contract was posted on July 13, 2026, and the technical requirements reflect critical support for naval fleet readiness, where component reliability directly impacts crew safety and operational effectiveness. All deliverables must align with applicable military specifications and undergo rigorous quality verification prior to acceptance.
Ornamental and Architectural Metal Work Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 327215
Federal
Tempered, Heated Glass Fabrication for Aerospace WindowThe contract involves the fabrication of precision tempered glass with integrated heating capability for use in the Heated Window Assembly identified by Part No. CC-10367-1, specifically for aerospace applications. The work is scoped under a subcontract with a NAICS code of 327215, indicating classification within the glass product manufacturing industry, and is tied to the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Jacksonville. Performance of the contract is designated to occur in Jacksonville, Florida, with a zip code of 32228, and the solicitation was posted on July 13, 2026. The heated glass component must meet stringent aerospace standards for durability, optical clarity, and thermal performance under extreme environmental conditions. As a subcontract, the primary contractor is expected to manage compliance, quality assurance, and delivery timelines aligned with DoD requirements, though no set-aside type or specific point of contact is detailed. The contract supports critical defense systems requiring reliable window assemblies that maintain functionality through icing, temperature fluctuations, and high-stress operational environments. Execution will require advanced manufacturing techniques to integrate heating elements into tempered glass without compromising structural integrity or optical performance.
Glass Product Manufacturing Made of Purchased Glass

POSTED

4 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS