Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

IMPELLER, PUMP, CENTR

Active
SPE7M1-26-T-228HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one impeller, pump, centrifugal, identified by NSN 4320-01-493-3726 and part number 6657D1895-1263G019A, supplied by CIRCOR NAVAL SOLUTIONS LLC. The item is classified as a critical application component and must be manufactured using casting or forging processes, with tooling typically required—though the government may not possess the necessary tooling, necessitating a Casting and Forging Assistance Request for sourcing support. The product must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Strict restrictions are in place barring intentional addition of mercury or mercury-containing compounds to the hardware, except for approved functional uses in batteries, lighting, sensors, weapon systems, or specific chemical reagents, with portable mercury-containing items required to have shock-proof construction and secondary containment per NAVSEA 5100-003D. Delivery is FOB origin with a 168-day lead time, with the required delivery date set for July 13, 2027. Packaging must adhere to MIL-STD-2073-1E with specific preservation, wrapping, and container codes, and marking must follow MIL-STD-129 with no special marking code applied. Palletization must meet DLA packaging standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation and shipping governed by specific DLA procedural notes. The contract was solicited under SPE7M1-26-T-228H with a response deadline of August 3, 2026, and is issued under the federal agency’s Maritime Supply Chain division. Quantity is fixed at one unit with zero variance allowed and inspection and acceptance occur at the destination.

General Info

One centrifugal pump impeller, NSN 4320-01-493-3726, to be delivered FOB origin by July 13, 2027, to New Cumberland, PA.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

333996 - Fluid Power Pump and Motor ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-228H.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
IMPELLER,PUMP,CENTR
IMPELLER,PUMP,CENTR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
CIRCOR NAVAL SOLUTIONS LLC 63857 P/N 6657D1895-1263G019A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017601221 0001 EA 1.000
NSN/MATERIAL:4320014933726
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
SPE7M1-26-T-228H
SECTION B
PR: 7017601221 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E6 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/19/2027 Original Required Delivery Date:07/13/2027
SPE7M1-26-T-228H NSN/Part Number: 4320-01-493-3726 Quantity: 1 EA Purchase Request: 7017601221QTY: 1 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333996
New
DIBBS
PUMP, RECIPROCATINGThe contract is for the procurement of five reciprocating pumps identified by NSN 4320013752315 and part number DLT05MAPM1001 under solicitation SPE7M1-26-T-225V, with a total value of $25.00 at $5.00 per unit. Delivery is required within 225 days from the contract date, with a firm delivery target of March 17, 2027, and the items must be shipped FOB origin. The quantity is fixed with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 as supplemented by the full suite of DLA Master List of Technical and Quality Requirements, which take precedence, and all packaging must be marked and labeled per MIL-STD-129. Palletization follows RP001 DLA Packaging Requirements for Procurement, and the unit of issue is each, with five units per order. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, and transportation logistics are governed by DLAD Proc Notes C19 and C20. All technical and quality standards referenced are sourced from the DLA Master List, with revisions effective as of the solicitation issue date. The contracting office is the Maritime Supply Chain under the Department of Defense, and the point of contact is Michael Reese, reachable via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
PUMP, RECIPROCATINGThis contract is for the procurement of six reciprocating pumps, identified by NSN 4320-01-536-5798 and part number P-84-8800, under solicitation SPE7M1-26-T-222X. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The contract mandates strict adherence to DLA packaging standards based on MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container codes, with marking conforming to MIL-STD-129 and no special marking applied. Pumps must be delivered FOB origin within 168 days of contract award, with no tolerance for quantity variance, and are to be inspected and accepted at the destination facility in New Cumberland, Pennsylvania. The delivery address and shipping instructions are detailed, referencing DLAD procedural notes for transportation logistics, and the required delivery date is January 19, 2027, with an original required date of October 23, 2026. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific functional uses in batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents authorized by NAVSEA; portable devices containing mercury must be shock-proof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 is required through a self-assessment. The product must be furnished using the DoD-authorized unit of issue, and all documentation must align with the DLA Master List revisions effective on the solicitation issue date. The designated point of contact is Michael Reese, and the contracting activity falls under the Department of Defense’s Maritime Supply Chain organization, with the acquisition classified under NAICS code 333996.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
PUMP, ROTARYThis contract is for the procurement of one rotary pump with NSN 4320-01-121-2867 under solicitation SPE7M1-26-T-226N, issued by the Department of Defense’s Maritime Supply Chain agency. The item is designated as a restricted source requiring engineering approval from the government design control activity, and delivery is set for 168 days after contract award with FOB origin terms. The pump must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging and preservation must strictly adhere to MIL-P-16789 and MIL-STD-2073-1E guidelines. Preservation method ZZ requires Level A preservation as specified in the commodity specification, and all packaging must include a second boundary of containment for any mercury-containing components, except for authorized functional uses in batteries, instruments, or chemical reagents per NAVSEA 5100-003D. Critical components are explicitly named, including Curtiss-Wright Electro-Mechanical Corp part numbers 441C and 453009B6. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must receive prior approval. All items must be marked in accordance with MIL-STD-129 without special markings, and palletization must follow DLA packaging requirements. The delivery destination is TRACY, CA, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The need ship date is January 19, 2027, with the original required delivery date set for April 17, 2027.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
ROTOR, PUMPThe contract pertains to the procurement of 12 units of a ROTOR, PUMP with NSN 4320-01-064-7594, under solicitation SPE7M4-26-T-279H, issued by the Department of Defense’s Fluid Handling Division. Manufacturing is required to be performed via a metal casting process, necessitating specialized tooling, and sourcing or technical support must be coordinated through designated DLA assistance teams based on application domain—aviation or land and maritime. This is a restricted-source item requiring government engineering source approval prior to award. Offerors must submit comprehensive documentation including full drawings, detailed process and operation sheets, identification of critical process suppliers including casting and forging sources, purchase orders, and a shock extension report compliant with MIL-S-901 and DI-ENVR-80706. If original OEM drawings are unavailable, an engineering analysis report detailing reverse engineering methods, sample sizes, measurement techniques, tolerances, and acceptance rationale must be provided for review by the engineering support activity. The contract incorporates mandatory quality and technical requirements from the DLA Master List, with compliance governed by the revision effective on the solicitation or award date depending on acquisition scale. Configuration changes require formal engineering change proposals and any deviations or waivers must be formally requested. Inspection and acceptance must occur at the origin, and government identification must be removed from non-accepted items. Strict prohibition exists against the intentional addition of mercury or mercury-containing compounds to the hardware or its contact surfaces, with limited exceptions for specific functional applications such as batteries, instruments, and weapon systems where mercury is essential; in such cases, portable fluorescent lamps and instruments containing mercury must feature shock-proof construction and a secondary containment boundary as specified by NAVSEA 5100-003D. Delivery is required within 60 days of award, with the place of performance designated as New Cumberland, PA, and primary point of contact established through Blake Tushar at DLA.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
SEAL ASSEMBLY, SHAFTThe contract pertains to the procurement of 52 units of a SEAL ASSEMBLY, SHAFT with NSN 4320015490579 under solicitation SPE7M1-26-T-228P, issued by the Department of Defense through the Maritime Supply Chain. The unit price is $52.00 per each, totaling a contract value of $2,704.00, with delivery required within 168 days from the contract award date, to be shipped FOB origin to the designated destination in San Diego, California. The quantity variance is strictly zero percent, meaning no over or under shipments are permitted. Inspection and acceptance occur at the destination, and all items must be packaged in accordance with ASTM D3951, with higher precedence given to any applicable DLA Master List of Technical and Quality Requirements, and all packaging must be marked and labeled per MIL-STD-129. Palletization follows DLA Packaging Requirement RP001, and the Unit of Issue is EA with a Quantity per Unit Pack of 001. The original required delivery date is October 18, 2026, with a revised need ship date of January 19, 2027. Technical and quality standards referenced are incorporated by full text via the DLA Master List, and government identification must be removed from any non-accepted supplies. The sole point of contact for this solicitation is Michael Reese, and responses were due by August 3, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
PUMP, HYDRAULIC RAM,The contract is for the procurement of 34 hydraulic ram pumps with NSN/Part Number 4320-00-318-0228 under solicitation SPE7M1-26-T-223Q, issued by the Department of Defense’s Maritime Supply Chain organization. This is a total small business set-aside solicitation with a response deadline of August 3, 2026, and a delivery requirement of 393 days after order award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed prior to return. The item includes technical data subject to export controls under ITAR or EAR, meaning any disclosure to foreign persons, including foreign nationals within the U.S., requires prior authorization. Only contractors certified under the US/Canada Joint Certification Program, who have completed DLA’s mandatory training and questionnaire, may access this data. The place of performance is specified as New Cumberland, Pennsylvania, with Michael Reese designated as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
SEAL ASSEMBLY, SHAFT, SPThe contract pertains to the procurement of a spring-loaded shaft seal assembly, identified by NSN 4320-01-253-9108 and part numbers 561B and BW7224 from MEGATOR CORP 52330, with a quantity of 10 units under unit of issue AY. Delivery is required within 192 days from contract award, with shipment FOB origin and zero tolerance for quantity variance. All items must comply with DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, and must be palletized according to specified standards. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for functional uses in batteries, lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable devices requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Inspection and acceptance occur at destination, and all supplies must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The original required delivery date was November 5, 2026, with a need ship date of February 12, 2027, under solicitation SPE7M1-26-T-225P, issued with technical and quality requirements aligned to the DLA Master List.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
TEE, FLANGEThe contract pertains to the procurement of one TEE ASSEMBLY with part number 701-1500-74 and NSN 4730-01-556-1419, supplied by Highland Engineering, Inc. under solicitation SPE7M3-26-T-7672. The item must comply with all technical and quality requirements referenced by R and I numbers as defined in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. The delivery is required FOB destination within 20 days of contract award, with no variance allowed in quantity. Inspection and acceptance both occur at the destination point. Packaging must adhere to MIL-STD-2073-1E with specified methods including preservation, wrapping, cushioning, and unit container D3, and marking must conform to MIL-STD-129 with no special marking required. The delivery address is APO AP 96278-2069, while the shipping destination is Osan AB, Korea, with transportation instructions governed by DLAD procedures C19 and C20. The required delivery date is July 21, 2026, and the solicitation response deadline is August 3, 2026. The procurement falls under NAICS code 333996 and is managed by the Department of Defense’s Fluid Handling Division with William Cain as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
PUMP-PLATE ASSEMBLYThe contract pertains to the procurement of 20 units of the PUMP-PLATE ASSEMBLY, identified by NSN 4320015742411 and part number 061475-104 from HYDRAULICS INTERNATIONAL, INC. The procurement is conducted under solicitation SPE7M1-26-T-205Q as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 333996, with all offers required to comply with Small Business Administration certification requirements. Delivery is due within 237 days from the award date, with FOB Origin terms, zero variance allowed in quantity, and inspection and acceptance occurring at the destination point, the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must strictly adhere to MIL-STD-2073-1E with specific codes for preservation, wrapping, cushioning, and unit containerization, while marking must conform to MIL-STD-129 without any special marking requirements. Palletization follows DLA Packaging Requirements for Procurement (RP001). The item is subject to a prohibition on Class I ozone-depleting chemicals, and any substitutes must be approved unless explicitly authorized by specifications. The contract includes mandatory compliance with a comprehensive suite of Federal Acquisition Regulation clauses covering cybersecurity, safeguarding defense information, whistleblower protections, trafficking in persons, employment eligibility verification, sustainable products, hazardous material handling, and restrictions on covered defense telecommunications equipment. Contractors must validate all representations in the System for Award Management and comply with the Berry Amendment and Buy American Act. Invoicing and payment must be processed via Wide Area Workflow using required document types, and technical data is accessible through the DLA portal. All proposals must be submitted by the deadline of July 23, 2026, and the contract is subject to DPAS priority ratings for national defense use.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333996
New
DIBBS
IMPELLER, PUMP, CENTRThe contract is for the procurement of two impellers for centrifugal pumps, identified by the NSN 4320-01-672-6052 and part number P/N 004-02N-A02P211-4.813 from Carver Pump Company. The item is classified as a critical application component, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced through R and I numbers, with the applicable revision determined by the solicitation or award date. Delivery is required FOB origin within 168 days from the contract award, with no tolerance for quantity variance—exactly two units must be delivered. Inspection and acceptance occur at the destination, and packaging must fully comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container specifications. Marking must adhere to MIL-STD-129 with a special code indicating omission of markings for sensitive items. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation and shipping procedures must follow DLAD Proc Notes C19 and C20. The original required delivery date is January 23, 2027, with a needed ship date of January 19, 2027. The solicitation number is SPE7M1-26-T-228F, issued on July 23, 2026, with responses due by August 3, 2026, under NAICS code 333996. Primary point of contact is Michael Reese of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
PUMP, CENTRIFUGALThis contract is for the procurement of one centrifugal pump identified by NSN 4320-01-549-9581 and part number 26037900018, supplied by Fairbanks Morse, LLC under solicitation SPE7M1-26-T-227E. The item is classified as a Navy field level reparable and requires strict configuration control in accordance with MIL-STD-973. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones. The pump is designated as a critical application item and must comply with all applicable packaging, marking, and delivery standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Full compliance with DLA packaging requirements is mandatory, and palletization must follow RP001 directives. The contract prohibits the use of Class I ozone-depleting chemicals and the intentional introduction of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemically specified reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier as per NAVSEA 5100-003D. Delivery is scheduled for 168 days after award, with FOB origin terms and inspection and acceptance points at the destination. The sole delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The solicitation is a total small business set-aside under NAICS code 333996, with a response deadline of August 3, 2026, and the required delivery date is July 1, 2027, though an earlier need date of January 19, 2027, is noted. The unit of issue is each, with a contract quantity of one unit and a total price of one dollar.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
ADAPTER, WEAR, FAN, FRThe contract is for 41 units of an adapter, wear, fan, frame component, identified by NSN 4320-01-229-6466, under solicitation SPE7M4-26-T-278V, with a response deadline of August 3, 2026, and a delivery requirement of 157 days after contract award. The solicitation is a total small business set-aside under NAICS code 333996, managed by the Fluid Handling Division of the Department of Defense, with performance located at Tinker Air Force Base, Oklahoma. Technical data associated with this item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons, including foreign nationals within the United States, and requiring prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire approval. Distribution of export-controlled information is governed by DFARS 252.225-7048, and all contractors must adhere to DLA’s packaging and handling requirements as specified in RP001.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 561910
New
DIBBS
Specialized Packaging and Preservation ServicesThe contract entails specialized industrial packaging and dry preservation services for transmitters in strict compliance with MIL-STD-2073-1E Method 41, requiring the use of desiccants and vapor corrosion inhibitors to ensure long-term protection against environmental degradation. All packaging must adhere to the labeling and documentation standards set forth in MIL-STD-129 and DLA RP001 to guarantee traceability, readiness, and interoperability across military supply chains. The work is scoped as a subcontract under NAICS code 561910 and is performance-driven at the facility located in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Bids must be submitted by the deadline of July 28, 2026, with the solicitation posted on July 23, 2026, through the DLA’s DIBBS platform under the agency name Maritime Supply Chain, which operates under the Department of Defense.
Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract requires the identification and thorough documentation of all hazardous materials utilized in manufacturing or packaging processes, with strict adherence to OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 regulations to ensure accurate labeling and comprehensive hazard communication. This includes maintaining up-to-date safety data sheets, proper marking of containers, and implementing standardized labeling systems to protect workers and ensure regulatory compliance across the supply chain. The scope demands meticulous attention to detail in tracking chemical substances and communicating associated risks to all relevant personnel. The contract is a subcontract under the Department of Defense's Maritime Supply Chain, with performance required at the facility in New Cumberland, Pennsylvania, ZIP code 17070-5002. It is classified under NAICS code 541690, indicating it involves other scientific and technical consulting services. The solicitation was posted on July 23, 2026, with a firm response deadline of July 28, 2026. All submissions must meet federal compliance standards for hazardous material management and be capable of supporting defense-related operations with verified documentation and labeling systems that align with both occupational safety and defense acquisition requirements.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541512
New
DIBBS
Secure Cybersecurity Compliance and CMMC ImplementationThe contract seeks cybersecurity advisory services to support compliance with the Cybersecurity Maturity Model Certification Level 2 standard, specifically focused on handling Covered Defense Information. The scope includes conducting a self-assessment of current cybersecurity posture, developing a comprehensive System Security Plan, and implementing controls outlined in NIST Special Publication 800-171 to meet required security standards. Services are to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The work falls under NAICS code 541512 for Computer Systems Design Services and is structured as a subcontract within the Department of Defense’s Maritime Supply Chain initiative. The solicitation was posted on July 23, 2026, and responses must be submitted by July 28, 2026, with all activities tied to ensuring the contractor meets federal cybersecurity obligations for defense-related data handling.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334511
New
DIBBS
High-Precision Transmitter Manufacturing and AssemblyThe contract entails the manufacture and delivery of ten military-grade TRANSMITTER, RESOLVE units with the National Stock Number 1285012307381, subject to strict adherence to MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for labeling and marking, and all applicable hazardous substance restrictions to ensure compliance with defense environmental and safety standards. The units are to be produced and assembled to meet exacting military specifications for performance, durability, and electromagnetic functionality in operational environments. Delivery is required to the designated place of performance at NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002, and the supplier must ensure all documentation, labeling, and packaging align with prescribed military protocols to facilitate seamless integration into the defense logistics chain. This subcontract, issued under NAICS code 334511 for communication equipment manufacturing, is managed by the Department of Defense through the MARITIME SUPPLY CHAIN agency, with a response deadline of July 28, 2026, and a posted date of July 23, 2026. The work involves precision manufacturing capabilities and supply chain rigor, requiring proven experience in defense electronics production. All components must be traceable, conform to restricted substance regulations such as RoHS or similar, and be delivered with full test reports and certification of compliance. The contract does not specify set-aside status, indicating open competition, and all correspondence and submissions must be directed through the official DIBBS platform linked in the solicitation.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & Inspection ServicesThe contract mandates the execution of independent inspection and verification services for clamp units under zero-based sampling plans compliant with AQL standards, ensuring rigorous quality control without reliance on historical data. All work must adhere to stringent industry protocols to validate product integrity and consistency, with inspections conducted impartially and documented thoroughly to meet defense-grade requirements. The effort is classified as a subcontract under a Total Small Business Set-Aside, exclusively open to small businesses as defined by the SBA, and falls under the NAICS code 541330 for other scientific and technical consulting services. This procurement is issued by the Department of Defense through the Maritime Supply Chain office, with a response deadline of July 28, 2026, and a posting date of July 23, 2026. No specific location for performance is indicated, implying flexibility in where the inspection services may be carried out, though all work must satisfy the Department of Defense’s quality expectations. Participation is restricted to small business contractors, emphasizing support for small business growth within the defense supply chain, and the solicitation is accessible publicly via the DIBBS portal for qualified entities to submit responses.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging & Marking ServicesThe contract requires the provision of packaging and marking services for loop clamps compliant with MIL-STD-2073-1E for military shipment standards and MIL-STD-130N for unique item identification and traceability. All work must adhere strictly to these Department of Defense specifications to ensure proper handling, storage, and identification throughout the defense supply chain. The effort is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, as defined by FAR 19.5, and falls under the NAICS code 561910 for other support activities for transportation. The solicitation is issued by the Maritime Supply Chain under the Department of Defense, with responses due by July 28, 2026, and the posting date is July 23, 2026. Performance location and point of contact details are not specified, but the work is intended for military shipment and requires full compliance with federal standards for marking and packaging.
Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data ManagementThis contract requires strict adherence to OSHA hazard communication standards, focusing on the proper management of safety data sheets and accurate labeling of all hazardous materials used in manufacturing operations. The work involves ensuring that all chemical handling, storage, and documentation procedures meet federal safety requirements to protect workers and maintain regulatory compliance across the supply chain. The contract is a small business set-aside under the SBA program, identified by NAICS code 541690, and is issued by the Department of Defense through the Maritime Supply Chain office. It is solicited as a subcontract with a response deadline of July 28, 2026, and was posted on July 23, 2026. The place of performance and specific office location are not detailed, but performance is expected to support defense-related manufacturing activities requiring rigorous hazardous material controls.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332322
New
DIBBS
Precision Metal Fabrication of Loop ClampsThe contract seeks the manufacture of precision loop clamp hardware identified by NSN 5340-00-286-9418, requiring strict adherence to SAE AS21919D specifications and applicable military inspection standards. This is a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 332322 classifying the work as other fabricated metal product manufacturing. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026, with performance obligations tied to the Department of Defense's Maritime Supply Chain. All work must be conducted in compliance with federal acquisition regulations and quality assurance protocols governing defense-related hardware.
Sheet Metal Work Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 325188
New
DIBBS
Supplier of Mercury-Containing ComponentsThe contract seeks a small business supplier to provide internal valve components containing mercury, strictly adhering to NAVSUP 5100-003D standards for handling, reporting, and hazardous materials shipping. The requirement is issued under a total small business set-aside classification, ensuring exclusive eligibility for small businesses as defined by the SBA, with the NAICS code 325188 indicating classification under other chemical product and preparation manufacturing. All delivered components must meet rigorous hazardous material protocols due to the presence of mercury, requiring full compliance with federal hazardous materials transportation and environmental safety regulations. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Maritime Supply Chain under the Department of Defense, though specific performance location and point of contact details are未提供.
All Other Basic Inorganic Chemical Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 488999
New
DIBBS
Packaging, Marking, and Shipping (MIL-STD-129 & Ocean Transport)This contract requires full compliance with MIL-STD-129 for the packaging and marking of valves, ensuring all units are properly labeled, documented, and configured to meet military logistics standards. The scope includes ocean transport logistics using U.S.-flagged vessels in accordance with applicable federal regulations, emphasizing adherence to both Department of Defense shipping protocols and international maritime compliance. All work must be performed by a small business as this is a Total Small Business Set-Aside under SBA guidelines, and the NAICS code 488999 indicates it falls under other support activities for water transportation. The solicitation is open for responses through July 28, 2026, with performance expected to support Maritime Supply Chain operations under the Department of Defense.
All Other Support Activities for Transportation

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation, documentation, and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to safeguard Covered Defense Information and ensure readiness for Department of Defense assessments. This effort is critical to meeting federal standards for protecting sensitive data within the defense supply chain and includes establishing policies, procedures, and technical safeguards that fully comply with the specified framework. The work must demonstrate continuous adherence to the controls and be prepared for audit or evaluation by the DOD to verify compliance and readiness. This is a subcontract designated as a Total Small Business Set-Aside under the SBA program, meaning only small businesses can compete for and be awarded the contract. It falls under NAICS code 541512 for Computer Systems Design Services and is issued by the Maritime Supply Chain organization within the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026, indicating a tight timeline for submissions. While specific location details are not provided, performance is expected to support DOD requirements, likely involving remote or hybrid work arrangements with alignment to federal cybersecurity mandates.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541611
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract requires comprehensive hazard communication labeling, MSDS preparation, and regulatory compliance services specifically for mercury-containing valves, ensuring alignment with OSHA standards and DFARS requirements. The work involves accurately identifying, classifying, and documenting the hazards associated with mercury components to meet federal safety and defense procurement regulations, with a focus on proper labeling and material safety documentation that supports safe handling, storage, and disposal practices. All deliverables must adhere to stringent federal guidelines to ensure worker safety and supply chain compliance. This is a small business set-aside subcontract under NAICS code 541611, issued by the Department of Defense through the Maritime Supply Chain organization, with a response deadline of July 28, 2026. The solicitation is open exclusively to small businesses as defined by the SBA, and performance is expected to support defense-related supply chain operations, though the precise place of performance is not specified. The contract emphasizes regulatory accuracy and documentation rigor, requiring the contractor to maintain up-to-date compliance with evolving federal hazardous materials handling protocols while operating under the broader framework of defense acquisition regulations.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details