Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Independent Testing & Validation Laboratory

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.
California Department of Transportation

POSTED

about 11 hours ago

DEADLINE

in 14 days
NAICS: 541380
New
SLED
Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.
Gwinnett County Government

POSTED

about 12 hours ago

DEADLINE

in 16 days
NAICS: 541380
New
SLED
Hazardous Waste Sampling and Profiling ServicesThis subcontract for Hazardous Waste Sampling and Profiling Services supports prime contractors on OC Waste and Recycling projects in California. The selected provider will perform chemical analysis and categorization of unknown or regulated waste streams, utilizing field sampling and specialized laboratory equipment such as Draeger pumps and OVA/HNU monitors to identify contaminants. All operations must be conducted by a certified environmental laboratory that maintains full compliance with California Code of Regulations Title 22. The primary deliverables for this engagement include detailed waste profile reports and formal categorization documentation. Interested parties should note that the response deadline is November 25, 2026, and the services fall under NAICS code 541380.
OC Waste & Recycling

POSTED

about 13 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SLED
Environmental & Material Testing Services
Warren County

POSTED

about 14 hours ago

DEADLINE

in 22 days
NAICS: 541380
New
SLED
Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.
University of Massachusetts System

POSTED

about 15 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
West Garage Modernization - 3rd Party Testing
Solicitation # BD-27-1109-UMMS-UMMS-134854
The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.
University of Massachusetts System

POSTED

about 15 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
Site Investigation and Field TestingThis subcontract opportunity for the City of Virginia Beach involves providing site investigation and field testing services for stormwater projects. The selected contractor will be responsible for conducting site visits, field reconnaissance, and technical testing to determine soil and site conditions using soil boring rigs and specialized equipment. Key deliverables include the provision of comprehensive site investigation reports and detailed field testing data. To qualify for this engagement, the contractor must employ a Professional Geologist or a Professional Engineer. The work will be performed within Virginia Beach under NAICS code 541380. Interested parties must submit their responses by the deadline of December 11, 2026.
City of Virginia Beach

POSTED

about 15 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.
DAS Procurement

POSTED

about 16 hours ago

DEADLINE

in 27 days
NAICS: 541380
New
DIBBS
Medical Device Sterilization and Packaging
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
NAICS: 541380
New
DIBBS
First Article Test (FAT) and Certification
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 541380
New
DIBBS
FAA Airworthiness Certification & Traceability Audit
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 541380
New
SLED
Material Testing ServicesThis subcontract opportunity with the City of Waco involves providing specialized material testing services for prime contractors working on city construction projects. The scope of work focuses on the testing of asphalt and concrete materials to verify strict compliance with both City of Waco and TXDOT specifications, concluding with the delivery of formal material testing reports and certifications. The solicitation is categorized under NAICS code 541380. Interested parties must submit their responses by the deadline of December 8, 2026. Further details regarding this procurement can be accessed through the Texas SmartBuy portal.
CITY OF WACO

POSTED

about 17 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

This subcontract, titled Independent Testing and Validation Laboratory, involves providing independent validation testing for prime contractors on US Army vehicle mounted shelter projects. The scope of work includes conducting sample, in-process, and end-item tests, specifically First Article Testing, utilizing signal generators and anechoic chambers. The primary objective is to validate shielding effectiveness in accordance with ASTM E1975-22, MIL-STD-285, and MIL-STD-461, with deliverables consisting of First Article Test Reports and Production Test/Inspection reports. Managed by the Department of Defense under agency W6QK Acc- Dta, this opportunity is designated as a total Small Business Set Aside under NAICS code 541380. The solicitation was posted on September 8, 2026, with a response deadline of October 9, 2026.

General Info

Small business subcontract for US Army vehicle shelter shielding validation and testing services.

Agency

Department Of Defense → W6QK Acc- Dta

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MI, USA

Set-Aside

SBA

Documents

This scope was carved out of W912CH-26-R-A096.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Solicitation_S-280C/G Vehicle Mounted Shelter

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc- Dta
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → W6QK Acc- Dta
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs independent validation testing for prime contractors on US Army vehicle mounted shelter projects. Conducts sample, in-process, and end-item tests, including First Article Testing (FAT), using anechoic chambers and signal generators. Validates shielding effectiveness against ASTM E1975-22, MIL-STD-285, and MIL-STD-461. Delivers First Article Test Reports and Production Test/Inspection reports.

More opportunities from Department Of Defense → W6QK Acc- Dta

Same awarding agency

NAICS: 332216
New
Federal
Solicitation: SMALL ARMS TOOL KIT (NSN: 5180-01-670-9469) - AMENDED
Solicitation # W912CH-26-B-A016
Solicitation W912CH-26-B-A016 is an Invitation for Bid (IFB) issued by the Army Contracting Command - Detroit Arsenal for a single five-year indefinite delivery indefinite quantity (IDIQ) contract. The contract is for the procurement of Small Arms Tool Kits (NSN: 5180-01-670-9469, Part Number: 0631A0000), with a guaranteed minimum quantity of 120 kits and a maximum estimated quantity of 6,404 kits over the five-year period. This procurement is a total small business set-aside and will be awarded as a firm-fixed-price contract to the responsible bidder offering the lowest evaluated price. Bidders must adhere to strict submission requirements, including the delivery of a signed TDPL cover sheet and completion of all representations in the System for Award Management (SAM). Technical compliance requires adherence to ISO 9001:2015 quality standards and the provision of three kits for a 100 percent first article inspection. Deliveries are FOB Destination, with primary distribution to the DDSP New Cumberland Facility. Bids must be submitted electronically via email to the designated contract specialists by the deadline of November 20, 2026.
Saw Blade and Handtool Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 23 days
View Details
NAICS: 541330
New
Federal
Technical Data & Logistics SupportThis subcontract, titled Technical Data and Logistics Support, is issued by the Department of Defense under agency W6QK Acc- Dta. The project focuses on the development and delivery of technical manuals and diagnostic data for prime contractors working on U.S. Army ISV projects. Key responsibilities include the creation of interface-control information, parts lists, and logistics data utilizing CAD/PLM systems to facilitate government maintenance and repair operations. The scope of work involves defining data rights and delivery schedules to ensure the timely provision of technical data packages, software diagnostic tools, and logistics manuals. Classified under NAICS code 541330, the opportunity was posted on October 26, 2026, with a response deadline set for November 25, 2026.
Engineering Services

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 332312
New
Federal
Roll Over Protection System (ROPS) FabricationThis subcontract involves the fabrication and supply of safety cages and roll-over protection structures for prime contractors working on U.S. Army ISV projects. The scope of work requires the use of specialized welding equipment to assemble high-strength tubular steel or alloy frames that strictly adhere to Army safety regulations and crashworthiness standards. Deliverables include both standalone and installed Roll Over Protection Systems. Managed under the Department of Defense through agency W6QK Acc- Dta, the project falls under NAICS code 332312. The solicitation was posted on October 26, 2026, with a response deadline set for November 25, 2026.
Fabricated Structural Metal Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336390
New
Federal
Chassis & Drivetrain SupplyThe Chassis and Drivetrain Supply subcontract, issued by the Department of Defense under agency W6QK Acc- Dta, focuses on providing critical structural and mechanical mobility components for U.S. Army ISV projects. The scope of work involves the manufacture and delivery of heavy-duty axles, off-road suspension systems, and transfer cases to prime contractors. In addition to hardware delivery, the provider is responsible for supplying reliability and validation test data and identifying technical data rights to support long-term government sustainment. Classified under NAICS code 336390, this opportunity was posted on October 26, 2026, with a response deadline of November 25, 2026. The contract ensures the delivery of essential axle assemblies and suspension kits necessary for the operational success of Army vehicle initiatives.
Other Motor Vehicle Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336311
New
Federal
Powertrain Supply (Engine & Transmission)This subcontract, managed by the Department of Defense under agency W6QK Acc- Dta, involves the supply and integration of primary propulsion systems for U.S. Army Infantry Squad Vehicle projects. The selected provider will be responsible for delivering high-performance automotive engines and transmissions that adhere to strict military specifications, with production scales ranging from 100 to over 1,500 units. Beyond the delivery of completed engine and transmission assemblies, the contractor must provide essential technical data, interface-control information, and detailed parts documentation to ensure long-term sustainment. The opportunity is categorized under NAICS code 336311, with a response deadline set for November 25, 2026.
Carburetor, Piston, Piston Ring, and Valve Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 332994
New
Federal
60 MM Mortar Mount
Solicitation # W912CH-27-R-A026
The United States Army Contracting Command Detroit Arsenal is soliciting a two-year, Firm-Fixed Price requirement contract for the procurement of 60 MM Mortar Mounts, identified by NSN 1010-01-561-9234 and part number 13017350. This procurement is a Small Business Set-Aside under NAICS code 332994. The scope of work includes the production of 118 units for the first year and an option for an additional 118 units in the second year. Key deliverables include the hardware, an Acceptance Inspection Equipment Report, and a First Article Test Report. The delivery schedule is the primary evaluation factor and is considered significantly more important than price, with higher ratings awarded to proposals that can deliver 30 or more days sooner than the solicited schedule. Access to the associated Technical Data Package is restricted to U.S. Government agencies and contractors with a Distribution Code D and requires certification under the United States/Canada Joint Certification Program. Contractors must comply with strict Controlled Unclassified Information guidelines, including mandatory DoD training and the signing of non-disclosure agreements. Packaging and marking must adhere to MIL-STD-2073-1 and MIL-STD-129, with inspection and acceptance of supplies occurring at the point of origin. Invoicing and payment will be processed electronically through the Wide Area Workflow system. Proposals must be submitted via email to the designated Contract Specialist by the specified deadline.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 336992
New
Federal
RECHARGE KIT, VALVE 4210-01-483-9758
Solicitation # W912CH27BA014_SourcesSought
The Army Contracting Command Detroit Arsenal is conducting market research through a Sources Sought Notice, solicitation number W912CH27BA014, to identify qualified vendors for the manufacture of Valve Recharge Kits, NSN 4210-01-483-9758, part number 579K4036. These kits are essential for servicing and resetting fire suppression systems within the M1 Abrams Family of Vehicles. This effort is for government planning purposes only and is not a formal solicitation for proposals. The government is seeking information from both small and large businesses under NAICS code 336992 to determine interest, capabilities, and production lead times. Interested respondents must submit a completed market research survey to Contract Specialist Angelo Wilson by November 5, 2026. A critical requirement for accessing the associated Technical Data Package, which is designated as distribution code D, is having a current DD 2345 Military Critical Technical Data Agreement on file with the Defense Logistics Information Service and active registration in the Joint Certification Program. Small businesses must also certify compliance with the nonmanufacturer rule. Responses should include details on quality management systems and production capabilities, with any proprietary information clearly marked as confidential.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541715
New
Federal
Sources Sought: Domestically Produced Hand and Measuring Tools (ACC-DTA CSO Amend 40)
Solicitation # W912CH26S0001
The Army Contracting Command – Detroit Arsenal (ACC-DTA) Commercial Solutions Opening (CSO), solicitation W912CH-26-S-0001, serves as a rapid-acquisition gateway to transition cutting-edge commercial technologies into active defense programs. This vehicle supports a diverse customer base, including the Intelligence and Security Command (INSCOM) and six Portfolio Acquisition Executives, focusing on the development, integration, and sustainment of ground vehicle systems to enhance Army modernization and readiness. The CSO utilizes a streamlined, merit-based, multi-phased evaluation process consisting of solution briefs, presentations, and commercial solution proposals. Awards may be issued through 2028 via FAR Part 12 commercial procedures or non-FAR agreements, such as transaction agreements under 10 U.S.C. 4022 and Cooperative Agreements under 31 U.S.C. 6305. The solicitation encompasses various Areas of Interest (AoI) targeting critical capabilities, including the FALCONS prototype for long-range reconnaissance, TIGER Readiness for the Abrams Main Battle Tank engine supply chain, Counter-Unmanned Aircraft Systems (C-UAS) detection, and the Light Tactical Trailer Heavy Chassis (LTT-HC). Funding ceilings for specific prototypes, such as FALCONS, range from 24 million to 30 million dollars depending on the use of government-provided kits. Key requirements include strict adherence to the Buy American Act and Specialty Metals clauses, with a prohibition on reliance on adversarial foreign nations for critical minerals. Technical evaluations focus on mission viability, affordability, and schedule realism, while administrative requirements include SAM registration, a Unique Entity ID, and compliance with NIST SP 800-171 for handling controlled unclassified information.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 336110
New
Federal
Infantry Squad Vehicle Follow-On Market Questionnaire
Solicitation # W912CH-27-RFI-ISV-0001
The United States Army, through the Product Director, Ground Mobility Vehicles, is conducting a market survey via Request for Information W912CH-27-RFI-ISV-0001 to identify capable industry partners for the continued development, production, and sustainment of the Infantry Squad Vehicle family. The initiative focuses on two primary platforms: the ISV-9, designed for a nine-soldier squad, and the ISV-Utility, designed for a five-soldier squad with a cargo utility bed. The government intends to procure a total potential quantity of approximately 20,787 vehicles, with a target contract award in July 2028 and initial deliveries anticipated to begin in the fourth quarter of Fiscal Year 2029. This RFI is used to assess the industrial base's capacity and determine the optimal acquisition strategy. Key technical requirements include compliance with Federal Motor Vehicle Safety Standards for roll-over protection, adherence to MIL-STD-814 and MIL-STD-209K for tie-down provisions, and transportability dimensions defined by MIL-STD-1366 and MIL-HDBK-1791. The government requires unlimited rights to all form, fit, and function data, as well as all training and maintenance materials. Interested respondents must be registered in the System for Award Management and provide detailed information regarding their socioeconomic status, security capabilities for handling Controlled Unclassified Information, and experience with Automotive Industry Action Group quality tools. Responses are due by November 25, 2026.
Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 333995
New
Federal
Manufacture and Supply of Valve Recharge Kits (NSN 4210-01-483-9758)This subcontract involves the manufacture and supply of Valve Recharge Kits, specifically NSN 4210-01-483-9758 and Part No. 57K4036, for prime contractors working on Army ACC-DTA projects. The selected provider must utilize precision manufacturing equipment to produce the kits in strict accordance with the Technical Data Package. To ensure compliance and quality, the contractor is required to maintain a documented Quality Management System and hold a current DD 2345 certification for necessary data access. The opportunity is designated as a total Small Business Set Aside under NAICS code 333995 and is managed by the Department of Defense. Interested parties must submit their responses by November 5, 2026. The primary objective of the agreement is the successful delivery of completed Recharge Kit Valves that meet all specified technical requirements.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 339115
New
Federal
Invitation for Bids - Vision Correction Assembly
Solicitation # W912CH26BA014
The Army Contracting Command - Detroit Arsenal is soliciting bids for a five-year, Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the manufacture and delivery of the Vision Correction Assembly, identified by NSN 4240-01-631-8044 and Part Number 5-1-4208. This non-commercial requirement involves production based on a Government-owned Technical Data Package (TDP) with Distribution Statement D export controls, requiring offerors to have a valid DD Form 2345 certification. The contract includes a guaranteed five-year minimum quantity of 30,690 units, with a maximum estimated quantity of 1,216,196 units. Key performance requirements include First Article Testing of 200 units, Production Lot Testing, and adherence to ISO 9001:2015 quality standards. The government intends to award a single contract to the responsible bidder offering the lowest total price, evaluated across five ordering years and a First Article Test Report. Bids must be submitted electronically by November 13, 2026, with a virtual bid opening scheduled for November 18, 2026. Deliveries are designated as FOB Destination to the Blue Grass Army Depot in Kentucky. Contractors are required to utilize the Wide Area WorkFlow system for invoicing and must comply with strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1. Access to the TDP may further require a Use and Non-Disclosure Agreement.
Ophthalmic Goods Manufacturing

POSTED

5 days ago

DEADLINE

in 16 days
View Details
NAICS: 541380
New
Federal
First Article Testing (FAT) & Validation ServicesThis subcontract for First Article Testing (FAT) and Validation Services supports prime contractors on Army Contracting Command Detroit Arsenal projects. The scope of work involves performing independent testing and validation, specifically focusing on airflow, vibration, noise, and stress testing, as well as dimensional inspections against the Technical Data Package. To execute these tasks, the contractor will utilize specialized equipment including wind tunnels, vibration tables, and precision Coordinate Measuring Machines. The selected provider must hold ISO/IEC 17025 accreditation and DD 2345 certification to ensure technical compliance. Key deliverables for this engagement include the submission of a First Article Test Report and a formal certification of compliance. This opportunity is categorized under NAICS code 541380 and is managed through the Department of Defense.
Testing Laboratories and Services

POSTED

6 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
Federal
Chemical and Mechanical Analysis Laboratory Services
Navsup Weapon Systems Support Mech

POSTED

about 2 months ago

CLOSED

28 days ago
View Details
NAICS: 541380
Closed
Federal
NDT Inspection for Valve Stem Production
Navsup Weapon Systems Support Mech

POSTED

about 2 months ago

CLOSED

28 days ago
View Details
NAICS: 541380
Closed
Federal
Water Quality Analysis and Compliance Testing
250-NETWORK Contract Office 10 (36C250)

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
Federal
Drinking Water Laboratory Testing Services
Ner Services Mabo (43000)

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
Federal
Water Chemical Testing and Technical Consultation
Fao

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
Federal
Accredited Materials Testing Laboratory
Navfacsyscom Far East

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
Federal
LMR System Testing and Acceptance
Navsup Flt Logistics Ctr Norfolk

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541380
Closed
Federal
Quality Assurance & First Article Testing (FATR)
W6QK Acc- Dta

POSTED

about 2 months ago

CLOSED

20 days ago
View Details
NAICS: 541380
Closed
Federal
Independent Testing and Dimensional Inspection Services
Nswc Indian Head Division

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
Federal
Spectrometer Calibration and Operator Training
W6QK Acc Anad

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541380
Closed
Federal
Aerospace Component Testing & Quality Assurance
Ok DLA Aviation At Oklahoma City

POSTED

about 2 months ago

CLOSED

19 days ago
View Details
NAICS: 541380
Closed
Federal
First Article Testing (FAT) and Quality Validation
W6QK Acc- Dta

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS