Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INDICATOR, CARBON MONOX

Active
SPE7M1-26-T-250GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.

General Info

Five carbon monoxide indicators, NSN 6665200018480, FOB destination, DLA compliance, no mercury, 12-month shelf life, delivery by August 3, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-250G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INDICATOR,CARBON MONOXIDE
INDICATOR,CARBON MONOXIDE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
SPE7M1-26-T-250G
SECTION B
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ035: ITEM MAY CONTAIN BATTERIES
Shelf-life Additional Requirements
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
CRITICAL APPLICATION ITEM
HONEYWELL ANALYTICS INC. 57914 P/N BWC2-M25100
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017744423 0001 EA 5.000
NSN/MATERIAL:6665200018480
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PER HCC: ARTICLE, BATTERY, LITHIUM
PARCEL POST ADDRESS:
SPE7M1-26-T-250G
SECTION B
PR: 7017744423 PRLI: 0001 CONT’D
R21451
USS ROBERT SMALLS CG 62
UNIT 100312 BOX 1
FPO AP 96662
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21451
USS ROBERT SMALLS CG 62
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
M/F: (TCN) R214516178CM01
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: YNCE01 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A41 DIST: 9B ADV: 2A FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE7M1-26-T-250G NSN/Part Number: 6665-20-001-8480 Quantity: 5 EA Purchase Request: 7017744423QTY: 5 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, CARBON DIOXID
Solicitation # SPE2DS-26-T-310Q
The contract specifies the procurement of two carbon dioxide gas detectors, identified by NSN 6515-01-588-7389, for delivery to Fort Wainwright, Alaska, with a strict five-day absolute delivery obligation. Each unit must be individually sealed in a protective container to prevent damage or breakage and packed in commercial exterior shipping containers suitable for safe transport via common carrier at the lowest possible cost, with export packaging required if necessary. All packaging and marking must comply fully with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and bidders are required to clearly state the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Brooke Webb as the primary point of contact. RD003 indicates potential covered defense information, and all supplies must adhere to DLA packaging requirements and the rule requiring removal of government identification from non-accepted items.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CONVERTER, ANALOG TO DI
Solicitation # SPE8EN-26-T-2779
This contract specifies the procurement of an analog-to-digital converter with NSN 7050-01-582-1116 and part number 70001777 from DIGI INTERNATIONAL INC., under solicitation SPE8EN-26-T-2779. The order is for ten units to be delivered FOB origin within 45 days of contract award, with no variance allowed in quantity and inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, and palletization must follow DLA’s RP001 packaging requirements, with DLA’s Master List of Technical and Quality Requirements superseding any conflicting specifications. The item is exempt from Class I ozone-depleting substances and严禁 the intentional introduction of mercury or mercury-containing compounds, except for specific functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or Navy-specified reagents; any portable devices containing mercury must include shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Delivery is directed to DLA Distribution San Joaquin in Tracy, California, with the required ship date set for October 2, 2026, and the original delivery deadline set for January 23, 2027. The unit of issue is each, priced at $10.00 per unit for a total of $100.00. The contract incorporates all relevant DLA technical and quality requirements referenced by R or I numbers published online, and the version in effect at the solicitation or award date controls. Transportation details follow DLAD Proc Notes C19 and C20.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
CUFF, SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-311C
The contract specifies the procurement of a pediatric non-invasive blood pressure cuff with specific bladder dimensions: 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. The item is identified by NSN 6515-01-593-8773 and is a replacement for earlier part numbers 6515-01-582-4060 and 6515-01-582-4072. The unit of issue is each (EA), with a total quantity of four units required, delivered FOB destination within 20 days of the contract award. The product must meet strict packaging and marking standards per Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must comply with ASTM D3951 and DLA’s Packaging Requirements for Procurement (RP001). All items must be sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate. Labeling, palletization, and handling must adhere to DLA requirements, and parcel post is explicitly prohibited; shipment must be traceable. The delivery point is a Department of Defense facility in San Antonio, Texas, with the government specifying that no government identification may be removed from non-accepted supplies. The contract references the DLA Master List of Technical and Quality Requirements as the governing standard, with precedence over any other specifications. The supplier, Philips North America LLC, is identified by part number 40401B, and the solicitation number is SPE2DS-26-T-311C with a required delivery date of August 6, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
RETAINER, TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-310Y
The contract specifies the procurement of a single unit of a tracheal tube retainer compatible with the Save Ventilator identified by NSN 6515-01-571-1689, manufactured by Laerdal and listed under NSN 6515-01-588-5834. The item is designated for use in medical acquisitions and must be packaged in commercial containment that ensures protection against damage or breakage, with all units sealed in appropriate individual containers and grouped in exterior shipping containers suitable for safe transport via common carriers at the lowest cost to the delivery point in Fort Wainwright, Alaska. All packaging and marking must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of this standard are available through DLA Troop Support. The item is subject to technical and quality requirements outlined in the DLA Master List, and the applicable revision of that list is determined by the solicitation or award date. The solicitation, issued under SPE2DS-26-T-310Y, requires responses by August 11, 2026, with a five-day delivery deadline after award. The contracting office is the Department of Defense’s Medical Supply Chain MD Surg FSF, and primary point of contact is James Burke.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBLY
Solicitation # SPE8EN-26-T-2808
This contract is for the procurement of a computer subassembly under solicitation SPE8EN-26-T-2808, with a total quantity of seven units to be delivered FOB origin within 17 days of award. The item is identified by NSN 7050015108447 and corresponds to specific part numbers from JERED LLC and ROCKWELL AUTOMATION, INC., each designated as a critical application item. Zero tolerance is permitted for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special markings required. Delivery is directed to DLA Dist San Joaquin in Tracy, CA, with a required ship date of September 4, 2026, and an original delivery deadline of December 13, 2026. The contract prohibits the intentional addition of mercury or mercury-containing compounds in or on the supplies, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date controls compliance. No approved technical data package is currently available from DLA Troop Support for this NSN, and requests to their team are to be avoided. The unit of issue is each, priced at $7.00 per unit, with a total contract value of $49.00. All transportation logistics are governed by DLA procedural notes, and the solicitation was issued under NAICS code 334511 with a response deadline of August 17, 2026.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
HARNESS, ORONASAL MASK
Solicitation # SPE2DS-26-T-310N
The contract pertains to the procurement of an oronasal mask harness, identified by NSN 6515016079935, under solicitation SPE2DS-26-T-310N, with a total requirement of five units—one unit under CLIN 0001 and four units under CLIN 0002. Delivery is required within five days of contract award, with FOB destination terms, and no quantity variance is permitted. All units must be delivered to two specified military locations: Fort Wainwright, Alaska, and Fort Campbell, Kentucky. The item is classified as a medical device regulated by the FDA, requiring referral through EBS to confirm compliance prior to award. Packaging and marking must fully comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must ensure protection against damage through sealed unit containers and suitable commercial shipping containers. Packaging must adhere to ASTM D3951 and DLA’s RP001 packaging requirements, with palletization following specified standards and traceable shipping methods only—parcel post is prohibited. All packaging and labeling must reflect government-specific identifiers as outlined in the procurement documentation, and the supplier must provide a commercial-grade container capable of safe transit at the lowest cost. Final inspection and acceptance occur at the delivery point, and all technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation date.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
AIRWAY, SUPRAGLOTTIC
Solicitation # SPE2DS-26-T-311H
The contract specifies the procurement of a supraglottic airway device, size 4, designed for adult medium use, with each box containing six units. The item has a mandatory shelf life of 36 months from the manufacturer’s date, and no more than five months may have elapsed between the manufacturer’s date and the delivery date to the government. Labeling must comply with the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, contract number, and lot number. Technical and quality requirements referenced under RS001 and RA001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must conform to DLA standards under RP001, and any non-accepted supplies must have government identification removed as required by RQ011. Bidders are required to identify the source and part number being supplied. The item is identified by NSN 6515-01-618-8278 with a total order of two boxes. Delivery is due within 20 days after award, under solicitation SPE2DS-26-T-311H, issued by the Department of Defense’s Medical Supply Chain for Surgical and Financial Services.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBL
Solicitation # SPE8E9-26-T-3353
This contract pertains to the procurement of a computer subassembly under solicitation SPE8E9-26-T-3353, with a delivery requirement of 51 days and a firm fixed price of $16.00 per unit for a total of 16 units, resulting in a total contract value of $256.00. The item is identified by NSN 7050-01-511-4904 and must be delivered FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, materials, and marking codes. Palletization must adhere to DLA packaging standards, and all supplies must be free of intentional mercury or mercury-containing compounds, except for designated exceptions such as batteries, fluorescent lights, sensors, and instruments specified by NAVSEA, which must include secondary containment and shockproof design. The contract also mandates compliance with DLA’s Master List of Technical and Quality Requirements, incorporates Covered Defense Information protocols, and requires the contractor to perform a CMMC Level 2 Self-Assessment to ensure cybersecurity readiness. The solicitation is governed by federal acquisition regulations, issued by the Department of Defense under the NAICS code 334511, with performance located in Tracy, California, and primary point of contact designated as Matthew Kruc.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBLY
Solicitation # SPE8EN-26-T-2778
The contract pertains to the procurement of two units of a computer subassembly identified by NSN 7050-01-548-4354, with a delivery requirement of 167 days after award. The solicitation number is SPE8EN-26-T-2778, issued on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 334511 and is managed by the Department of Defense through the Construction & Equipment T & IFO EQ office, with performance localized to Tracy, California, 95304-5000. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment later supersedes it. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier compliant with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies, and covered defense information applies to this procurement. Point of contact is Jennifer Esworthy, reachable via email and phone provided.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBLY
Solicitation # SPE8EN-26-T-2829
This contract, issued under solicitation SPE8EN-26-T-2829, specifies the procurement of six units of a computer subassembly identified by NSN 7050-01-565-3832, with a delivery requirement of 167 days from the award date and FOB origin terms. The item must be packaged in compliance with ASTM D3951, with all packaging and labeling strictly following MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging requirements, which take precedence over any other standards. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents approved by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. The contractor is required to comply with CMMC Level 2 self-assessment for cybersecurity and must handle Covered Defense Information according to RD002 policies. No technical data package is currently available from DLA Troop Support for this NSN, and requests for such data are not to be submitted. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, with a need ship date of February 1, 2027, and an original required delivery date of May 4, 2027. The unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The contract is governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is controlled by the solicitation issue date.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBL
Solicitation # SPE8E9-26-T-3358
This contract pertains to the procurement of nine computer subassemblies identified by NSN 7050-01-523-3437, with a delivery deadline of 167 days after order. The solicitation number is SPE8E9-26-T-3358, issued on August 5, 2026, with responses due by August 17, 2026, under the NAICS code 334511 for computer and peripheral equipment manufacturing. The contract is administered by the Department of Defense through the Construction & Equipment MRO SVC I office, with performance required at New Cumberland, PA, 17070-5002. All supplies must comply with DLA packaging and technical requirements as enumerated in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Additionally, government identification must be removed from non-accepted supplies, and covered defense information applies to this procurement. The primary point of contact is Matthew Kruc, reachable via email and phone for inquiries.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M1-26-T-250H
The contract pertains to the procurement of 30 circuit card assemblies identified by NSN 5998-00-111-4498 and part number 65901-02973-044, with a unit price of $30.00 and a total value of $900.00. Delivery is required within 20 days under FOB origin terms, with no variance allowed in quantity, and acceptance occurs at the origin point. The items must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129, and contain no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, with Covered Defense Information rules applied. The goods are destined for the Government of Israel, Ministry of Defense, with a specified freight forwarder and government use identifiers included. The solicitation number is SPE7M1-26-T-250H, issued by the Department of Defense’s Maritime Supply Chain, with a response deadline of August 17, 2026, and a required delivery date of August 7, 2026. The contract falls under NAICS code 334418 and is administered through DLA’s eProcurement system, with all unit of issue conversions defined by official DoD standards.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
ALARM, GAS, AUTOMATIC
Solicitation # SPE7M1-26-T-250L
The contract pertains to the procurement of 307 units of an automatic gas alarm with NSN 6665-01-499-7234 under solicitation SPE7M1-26-T-250L, issued by the Department of Defense’s Maritime Supply Chain division. The solicitation is a total small business set-aside, with responses due by August 17, 2026, and requires delivery within 13 days after award. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, where revisions in effect at the time of solicitation issue or award govern compliance. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except under specific exemptions for functional uses such as batteries, fluorescent lights, weapons systems, or authorized instruments, with portable devices containing mercury required to be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, as no existing data is available. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Misty Slone, reachable via email and phone provided.
Other Measuring and Controlling Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-26-Q-1335
The seal assembly is a shaft-mounted, spring-loaded mechanical seal requiring pure carbon material proprietary to Morgan Advanced Materials, specifically Cage 80894, as defined by Drawing 5773203, Sheet 26. Manufacturing must comply with NAVSEA 5773203, Piece No. 10A, and Drawing Sheets 26 and 30, with three critical deviations: the outer shell must follow Ram Seal Drawing 01-250159 Rev B, the drive band must adhere to Ram Seal Drawing 11-250159 Rev B, and the spring retainer must conform to Ram Seal Drawing 12-250259 Rev A. Each unit must be delivered with a complete installation kit containing specified O-rings identified by part numbers 5773203-1.6, 5773203-1.7.1, 5773203-12.6.4, 5773203-1.8.1, 5773203-1.9.1, 5773203-4.1, 5773203-10.11, 5773203-12.6.5, and a 2-inch steel spanner wrench with a .250 inch pin per Fed Spec GGG-W-665 Type 2 Grade A. The contract mandates a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and requires electronic submission of each COQC via the iRAPT system. Product verification testing may be invoked at the government’s discretion under DLAD 52.246-9004, and all supplies must conform to DLA packaging, configuration management, and inspection requirements including RQ002, RQ009, and RD003. The NSN 4320-01-269-8849 is solicited under a total small business set-aside with a delivery deadline of 30 days ADO for 104 units, sourced through the Department of Defense’s Maritime Supply Chain under contract SPE7M1-26-Q-1335.
Air and Gas Compressor Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 333618
New
DIBBS
MODIFICATION KIT, EL
Solicitation # SPE7M1-26-T-250F
This contract specifies the procurement of a Modification Kit, EL, with NSN 6105-01-705-8310 and part number 377-53322-000, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. The delivery is for one unit, to be shipped FOB destination within 20 days of contract award, with no quantity variance allowed. All packaging and preservation must strictly comply with MIL-STD-2073-1E, Appendix D, for kits, and marking must adhere to MIL-STD-129. Packaging requirements as defined by DLA’s RP001 apply, including palletization and the use of specified preservation methods, wrapping, and cushioning materials. The item is designated as a Critical Application Item and may involve Covered Defense Information under RD003. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. The delivery destination is the USS CANBERRA LCS 30 at FPO AP 96694, and shipment logistics must follow DLAD Proc Note C19 for transportation and C20 for first destination delivery. The contract solicitation number is SPE7M1-26-T-250F, with a required delivery date of August 3, 2026, and procurement is managed under NAICS code 333618 by the Department of Defense’s Maritime Supply Chain.
Other Engine Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
ALARM, GAS, AUTOMATIC
Solicitation # SPE7M1-26-T-250J
The contract is for the procurement of 185 units of an automatic gas alarm identified by NSN 6665-01-499-7234 under purchase request 7015538145, with a delivery requirement of 13 days after order placement. The solicitation number is SPE7M1-26-T-250J, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with a response deadline of August 17, 2026. The technical requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revision control depending on the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision in effect on the RFP issue date unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or equipment, unless exempted for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Offerors must provide a complete data package covering both the approved and alternate parts, as no existing data is available for this item. The place of performance is Tracy, California, with Misty Slone listed as the primary point of contact.
Other Measuring and Controlling Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M1-26-U-5053
The contract is for the procurement of 11 electrical connector receptacles with part number 2583A-125 and NSN 5935-01-524-0367, supplied by PAULUHN ELECTRIC MANUFACTURING LLP under solicitation SPE7M1-26-U-5053. Delivery is required within 57 days FOB origin with zero variance in quantity, and inspection and acceptance occur at the destination. The item is covered under DLA DIRECT, CONUS, and must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA packaging requirements. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging under ASTM D3951 is permitted. The unit of issue is each, with a total price of $11.00, and the contract includes strict requirements for removal of government identification from non-accepted supplies and bare item marking. All packaging and labeling must align with the specified QUP of 001 and DLA unit of issue guidelines.
Electronic Connector Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 333996
New
DIBBS
HOUSING SECTION, LIQ
Solicitation # SPE7M1-26-T-250A
This contract pertains to the procurement of a housing section and pump under solicitation SPE7M1-26-T-250A, with a single unit of 1 EA identified by NSN 4320-01-511-0467 and part number 009-1107B08-347552A from Carver Pump Company. Delivery is required within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping, and palletization standards. Mercury and mercury-containing compounds are strictly prohibited in or on the supplied hardware except for designated functional uses such as certain batteries, lighting, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with additional containment and shockproofing mandates for portable devices. Packaging must adhere to RP001 and special marking code 00-00 applies, with no unique identifiers beyond standard requirements. Shipment must be delivered to the FPO address for USS JOHN P MURTHA LPD 26 using the fastest traceable means, explicitly prohibiting parcel post, and must follow DLA procurement notes C19 and C20 for transportation routing. The supply is tied to Project LK5 TP 2 with a required delivery date of August 3, 2026, and is subject to federal procurement standards incorporating technical and quality requirements referenced from the DLA Master List. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact.
Fluid Power Pump and Motor Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-250E
The contract pertains to the procurement of two electrical coils identified by NSN 5950-01-582-0088 and part number 266763-902-D, supplied by IVES EQUIPMENT, LLC and AUTOMATIC SWITCH COMPANY, with a total quantity of two units at a unit price of $2.00 each, for a total contract value of $4.00. Delivery is required FOB destination within 20 days of contract award, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including MIL-STD-129 labeling, RP001 palletization standards, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with the former taking precedence. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemically specified reagents, and when present, portable devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. All packaging must be marked and labeled per government specifications, and the shipment must be sent to the designated FPO address with transportation directives outlined in DLAD Proc Note C19 and C20. The contract is governed by DLA procurement policies, and technical specifications referenced through R and I numbers must be accessed via the official DLA Master List website. The required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and primary point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M1-26-Q-1336
This contract specifies the procurement of 2,000 O-rings made from synthetic rubber, identified by the National Stock Number 5331-00-248-3849 and part number MS29513-019, with detailed technical requirements aligned to SAE AS29513 Revision C dated October 1, 2016. The item is classified as a commercial item and must be manufactured by a supplier approved on the Qualified Products List (QPL); only QPL-approved manufacturers are eligible at the time of award. The product has a non-extendable shelf life of 180 months and is designated as a Type I (Code Y) item, with packaging and preservation strictly governed by MIL-STD-2073-1E and MIL-STD-129. Mercury and mercury-containing compounds are prohibited from direct contact with the item or its packaging, with exceptions only for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and any such components must meet additional containment standards. Packaging must be in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor delivery, foreign military sales, or stock shipments. Preservation methods require dry, clean packaging with no mercury-based compounds, and markings must comply with MIL-STD-129, including the special marking code for Type I shelf life. The delivery is FOB origin with a firm fixed price and zero variance allowed in quantity, to be delivered within 126 days after contract award, with inspection and acceptance occurring at the destination. The contract is subject to all technical and quality requirements referenced in the DLA Master List, and the sole point of performance and delivery is Tinker AFB, Oklahoma.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M1-26-T-250B
This contract covers the procurement of a fluid filter element identified by NSN 4330012808418 and part number F64318, with approved suppliers including Falls Filtration Technologies Inc., Wix Corp, Honeywell International Inc, Donaldson Company Inc, and Genuine Parts Company. The item is classified as a critical application and must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials require prior approval unless already authorized by specification. The unit of issue is each, with a contract quantity of two units to be delivered within 20 days from the award date, FOB origin, under Solicitation SPE7M1-26-T-250B. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling governed by these standards. Shipping must occur via the fastest traceable method, excluding parcel post, and all deliveries must be directed to the specified address at Aberdeen Proving Ground, Maryland. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The required delivery date is August 3, 2026, and the contract includes a government-only point of contact and tracking identifiers for logistics and accountability.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M1-26-U-5050
The contract solicits 134 units of a circuit breaker identified by NSN 5925-01-430-2318 under solicitation number SPE7M1-26-U-5050, with a response deadline of August 20, 2026, and a required delivery within 99 days of award. The item is classified as a commercial item description, eliminating the need for a Form 239 and enabling competitive procurement using data available through the drawing repository referencing the CID number and NSN. All supply requirements must comply with the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Government identification must be removed from non-accepted supplies, and full and open competition is mandated. The contracting activity falls under the Department of Defense’s Maritime Supply Chain, with primary point of contact Bryan Fair reachable via email and phone. The solicitation is posted on DIBBS, and performance is expected within U.S. territory.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 334514
New
DIBBS
NRP, EMI FILTER A001
Solicitation # SPE7M1-26-T-250C
The contract pertains to the procurement of one unit of an EMI Filter designated as NRP, EMI FILTER A001 with NSN 6625-01-620-5168, issued under solicitation SPE7M1-26-T-250C by the Department of Defense through the Maritime Supply Chain. The item must be delivered within ten days to Camp Arifjan in Kuwait, with delivery terms FOB origin and no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking instructions with no special marking required. The supply may contain batteries and is subject to DLA packaging requirements and the removal of government identification from non-accepted supplies. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the contract applies covered defense information protocols. Transportation and shipment logistics are governed by DLAD procedural notes, and the item must be delivered no later than August 3, 2026. The supplier, AZACHOROK CONTRACT SERVICES, LLC, is obligated to adhere to all technical and quality requirements referenced from the DLA Master List, and the unit of issue is specified as each (EA) per DoD standards.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details