Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

66--INDICATOR,PRESSURE

Awarded
SPE4A5-26-T-043MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract covers the procurement of nine pressure indicators, part number 3731-931-6000, with National Stock Number 6685-01-690-9071, to be delivered within 171 days to the Defense Logistics Agency Distribution in New Cumberland, Pennsylvania. The contract incorporates detailed technical and quality requirements from the DLA Master List and mandates adherence to specific packaging, marking, and sampling standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance includes strict sampling plans aligned with MIL-STD-1916 or equivalent, ensuring zero tolerance for non-conformances in sampled lots. The source for production is identified as Crystal Engineering Corporation, with King Nutronics Corporation as the approved source for part number 3731-931-6000. The contract prohibits intentional use or contact with mercury except in specified exceptions and requires compliance with configuration control and government property marking stipulations. Delivery and inspection will occur at destination, and transportation follows prescribed Defense Logistics Acquisition Directives. The packaging must ensure protection for delicate instruments, with palletization conforming to DLA procurement packaging requirements. Contact for the contract is available through the Department of Defense's ASC Supplier OEM Division, with specified points of contact for coordination. The solicitation was posted in April 2026, with responses due in early April, and the original required delivery date set for June 2026.

General Info

Procurement of nine pressure indicators, strict quality and packaging standards, delivery June 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contract Value

$32,403.6

NAICS

334512 - Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

Place of Performance

VA, USA

Set-Aside

NONE

Awardee

KING NUTRONICS CORPORATION

Award Issued Date

Documents

1

SPE4A5-26-T-043M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeRICHMOND, VA, 23237, USA
Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Office AddressRICHMOND, VA, 23237, USA
Contacts
Alisha Grove
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INDICATOR,PRESSURE
INDICATOR,PRESSURE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
*** CONFIG CONTROL
SOURCE: CRYSTAL ENGINEERING CORPORATION
CAGE: 19S62
P/N: 3731-931-6000
APPROVED SOURCE: KING NUTRONICS CORPORATION
CAGE: 13859
P/N: 3731-931-6000
IDENTIFY TO:
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPE4A5-26-T-043M
SECTION B
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
KING NUTRONICS CORPORATION 13859 P/N 3731-931-6000
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016180181 0001 EA 9.000
NSN/MATERIAL:6685016909071
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:05 -05 Delicate instrument
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A5-26-T-043M
SECTION B
PR: 7016180181 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:09/29/2026 Original Required Delivery Date:06/12/2026
SPE4A5-26-T-043M NSN/Part Number: 6685-01-690-9071 Quantity: 9 EA Purchase Request: 7016180181QTY: 9 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334512
New
DIBBS
TRANSMITTER, TEMPERATUR
Solicitation # SPE4A0-27-T-0336
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
INDICATOR, PRESSURE
Solicitation # SPE4A5-27-T-1992
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
COVER ASSY
Solicitation # SPE4A1-27-T-0211
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
DETECTOR, HEAT
Solicitation # SPE7M2-27-T-0399
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334512
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - Metasys
Solicitation # N69450SP7777-Metasys
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the Fiscal Year 2027 P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking to identify potential sources capable of providing a building automation control system with performance equal to the Johnson Controls Metasys system. Key technical requirements include scalability for seamless connection of field controllers to supervisory servers, open integration supporting industry standards like BACnet, encrypted communications with multi-factor authentication, and a centralized interface dashboard for security risk management. Crucially, the system must provide seamless connectivity to the existing Metasys system currently serving the main hospital in Building 2080. This is a sources-sought notice for market research purposes and does not constitute a request for proposals or a binding contract. Interested respondents must submit detailed technical data, a completed company information attachment including CAGE and NAICS codes, and bonding capacity details to the designated points of contact by October 30, 2026, at 3:00 PM ET. Submissions are limited to five one-sided pages and must exclude company brochures. The government is evaluating a wide range of business sizes, including various small business categories and large businesses, to determine if alternative products can meet these specific operational and integration requirements.
Navfacsyscom Southeast

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSUR
Solicitation # SPE4A6-27-T-6957
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
SLED
Building Automation Systems (BAS) & Controls SupplyThis subcontract opportunity involves the supply of building automation systems and controls to automate environmental climates within museum facilities for the Tulalip Tribes. The scope of work requires the provision of controllers, sensors, and software designed for integrated HVAC systems, with a specific emphasis on compatibility with humidity and chilled water systems. The selected provider will be responsible for delivering all necessary BAS hardware and software licenses to ensure precise climate control. The project is categorized under NAICS code 334512 and is managed by the Tulalip Tribes in Washington. Interested parties must submit their responses by the deadline of November 24, 2026. This contract is structured as a subcontract, supporting prime contractors tasked with the facility projects.
The Tulalip Tribes

POSTED

1 day ago

DEADLINE

in 28 days
View Details
NAICS: 334512
New
DIBBS
Supply of Recording Resistance ThermometersThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, involves the supply of four recording resistance thermometers for prime contractors. The performance of this contract takes place in Tracy, California, under NAICS code 334512. The contractor is required to adhere to strict military standards for logistics and security, including packaging per MIL-STD-2073-1E, marking shipments per MIL-STD-129 using Special Marking Code 05 for delicate instruments, and palletizing according to RP001. Additionally, the provider must comply with DFARS 252.204-7012 to ensure the proper safeguarding of covered defense information.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 334512
New
DIBBS
Supply of Recording Resistance Thermometers (NSN 6685017196645)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division, requires the supply of seven Renk Corp OBAS3 recording resistance thermometers, part number 724823 and NSN 6685017196645. The contractor must ensure all units adhere to the Buy American Act and the Berry Amendment. Performance will take place in Tracy, California, under NAICS code 334512. Strict compliance with military standards is required for the fulfillment of this order. Packaging must follow MIL-STD-2073-1E, and marking must adhere to MIL-STD-129 using delicate instrument code E05. Additionally, quality assurance sampling must be conducted according to MIL-STD-1916 or ASQ H1331 to ensure the delivery of seven properly packaged and marked units.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 334512
New
DIBBS
Supply of Dial Indicating Pressure GageThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the procurement of one Dial Indicating Pressure Gage identified by NSN 6685016715675. The contractor must ensure the item adheres to sampling methods per MIL-STD-1916 or ASQ H1331, Table 1, and follows packaging guidelines established in MIL-STD-2073-1E. The delivery of the physical gage must be completed within 148 days. The performance of this contract is located in New Cumberland, Pennsylvania, and falls under NAICS code 334512.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 334512
New
DIBBS
Supply of Capillary Tube Indicating ThermometersThis subcontract involves the supply of 12 specialized capillary tube indicating thermometers, identified by NSN 6685-01-721-9142, for prime contractors working on DLA Weapons Support projects. The procurement is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with performance taking place in Tracy, California. Eligible providers must maintain an active CAGE code, be registered in the System for Award Management, and ensure full compliance with FAR 52.211-5. The contract requires the delivery of the specified units via FOB Origin shipping, with a response deadline set for November 2, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL I
Solicitation # SPE4A6-27-T-6594
Solicitation SPE4A6-27-T-6594 is a total small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of eight dial indicating pressure gages, identified by NSN 6685008146080. The requirement is categorized under NAICS code 334512 and specifies a delivery timeline of 437 days after order, with shipping terms set as FOB Origin. Delivery is destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will take place. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking, specifically requiring the delicate instrument marking code 05. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements. Offerors must submit quotes via the DIBBS system and comply with domestic material restrictions, including the Buy American Act and the Berry Amendment. Payment and receiving reports are to be processed electronically through the Wide Area Workflow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 335911
New
DIBBS
Pressure Switch Supplier (NSN 5930-01-297-1333)This subcontract, issued by the Department of Defense under the ASC Supplier OEM Division, requires the procurement and delivery of one Pressure Switch, identified by NSN 5930-01-297-1333. The supplier must ensure the part meets all Critical Application Item quality and safety standards and provide a comprehensive technical data package to facilitate the evaluation of approved or alternate components. The contract falls under NAICS code 335911 and mandates strict compliance with DFARS 252.204-7019 regarding NIST SP 800-171 data protection standards. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 28, 2026.
Storage Battery Manufacturing

POSTED

4 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 423840
New
DIBBS
Supplier of Nonmetallic Aerospace Seals (P/N 74B430929–101)This subcontract through the Department of Defense ASC Supplier OEM Division involves the procurement and manufacture of five nonmetallic aerospace seals, specifically Boeing part number 74B430929–101. The supplier is responsible for ensuring all materials comply with Boeing 76301 specifications and providing a certification of conformance. Quality assurance is a critical component of the agreement, requiring testing performed in accordance with MIL-STD–1916, ASO H1331 Table 1, and MIL-STD-105/ASQ Z1.4. The place of performance for this contract is located in San Diego, California, under NAICS code 423840.
Industrial Supplies Merchant Wholesalers

POSTED

4 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 488510
New
DIBBS
Military Packaging and Marking ServicesThis subcontract for Military Packaging and Marking Services, issued by the Department of Defense ASC Supplier Oper OEM Division, requires the provision of military-grade packaging, marking, and palletization for prime contractors fulfilling DLA supply contracts. The scope of work involves applying markings according to MIL-STD-129, packaging per MIL-STD-2073-1E, and palletizing per RP001 using industrial marking equipment and military-spec crates to ensure shipments are ready for final delivery. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 488510. To be eligible, providers must hold certifications in MIL-STD-2073-1E, MIL-STD-129, and RP001. The solicitation was posted on October 23, 2026, with a response deadline of October 28, 2026.
Freight Transportation Arrangement

POSTED

4 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 334220
New
DIBBS
Multiplexer Subassembly SupplyThis subcontract involves the manufacture or sourcing of five Multiplexer Subassemblies for the Department of Defense, specifically through the ASC Supplier Operator OEM Division. All units must be produced according to NSN 5895-01-426-4389 specifications and delivered FOB Destination to New Cumberland, Pennsylvania. Strict adherence to military standards is required for the fulfillment of this order. This includes utilizing military-grade components and materials, packaging items per MIL-STD-2073-1E, marking items per MIL-STD-129, and palletizing all shipments according to RP001 standards.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 336413
New
DIBBS
MULTIPLEXER SUBASSE
Solicitation # SPE4A5-26-T-319Z
Solicitation SPE4A5-26-T-319Z is an automated simplified acquisition issued by the DLA Aviation ASC Supplier Oper OEM Division for the procurement of five Multiplexer Subassemblies, identified by NSN 5895014264389 and part number 16E4004-809. The hardware is associated with manufacturers Centroid, Inc., Lockheed Martin Corporation, and Interconnect Wiring LLP. The required delivery date is September 27, 2027, with a delivery window of 411 days after the date of order. Shipping is designated as FOB Origin, with the final destination for both inspection and acceptance located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program (DFARS 252.225-7001) and safeguarding covered defense information per DFARS 252.204-7012. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS), and electronic invoicing must be processed via the Wide Area WorkFlow (WAWF) system. This procurement is not a small business set-aside.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE4A5-26-T-106Q
Solicitation SPE4A5-26-T-106Q is issued by the DLA Aviation ASIC Supplier Oper OEM Division for the procurement of five nonmetallic seals, specifically Boeing Company part number 74B430929-101 (NSN 5330-01-521-3030). The contract specifies a delivery timeline of 155 days after the order, with a need ship date of October 11, 2026, and an original required delivery date of December 7, 2027. Delivery is set as FOB Origin, with the destination for inspection and acceptance located at DLA Distribution San Diego. This is not a small business set-aside, and the assigned NAICS code is 339991. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking. Due to the potential for UV deterioration, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Quality assurance requires a manufacturer's inspection system complying with SAE AS9003 or ISO 9001, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Cybersecurity compliance is mandatory, requiring CMMC Level 2 self-assessment and adherence to NIST SP 800-171 and DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area Workflow system.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

4 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 561910
DIBBS
Aviation Component Packaging and Labeling ServicesThis subcontract for Aviation Component Packaging and Labeling Services, issued by the Department of Defense ASC Supplier OEM Division, requires the specialized packaging and marking of 16 hardware units for prime contractors delivering DLA Aviation ASC contracts. The service provider must ensure all aviation components are packaged according to ASTM D3951 standards and marked in compliance with MIL-STD-129, utilizing appropriate labeling equipment and adhering to the DLA Master List of Technical and Quality Requirements. The opportunity is categorized under NAICS code 561910 and was posted on October 20, 2026, with a response deadline of November 20, 2026. The primary objective is to ensure that all delivered hardware is properly secured and labeled for shipment in strict accordance with military specifications.
Packaging and Labeling Services

POSTED

7 days ago

DEADLINE

in 24 days
View Details
NAICS: 336413
DIBBS
Supply of Cover, Spinner Assembly (NSN 1680-01-426-2704)This subcontract involves the supply of 16 units of the Cover, Spinner Assembly, identified by NSN 1680-01-426-2704, for prime contractors supporting DLA Aviation ASC contracts. The selected provider is responsible for manufacturing or sourcing these components using precision machining or molding equipment to ensure full adherence to OEM specifications. The contractor must provide necessary CAGE code and facility documentation covering design, fabrication, and testing processes. All deliverables must comply with the DLA Master List of Technical and Quality Requirements. This opportunity is managed under the Department of Defense through the ASC Supplier Oper OEM Division with a response deadline of November 20, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

7 days ago

DEADLINE

in 24 days
View Details
NAICS: 331528
DIBBS
Aerospace Forging and Casting ServicesThis subcontract, titled Aerospace Forging and Casting Services, is issued by the Department of Defense under the ASC Supplier OEM Division. The project involves the high-temperature metal casting or forging of aerospace-grade alloy blanks intended for prime contractors on DLA Aviation supply contracts. The primary objective is the production of raw compressor disk blanks that meet strict material specifications and dimensions, as these components are classified as Critical Safety Items. The selected provider must utilize industrial casting furnaces or forging presses capable of processing superalloys to deliver the finished compressor disk blanks. This opportunity was posted on September 29, 2026, with a response deadline of October 29, 2026. The work falls under NAICS code 331528.
Other Nonferrous Foundries (except Die-Casting)

POSTED

28 days ago

DEADLINE

in 1 day
View Details
NAICS: 336413
DIBBS
Aircraft Gas Turbine Engine Compressor Disk ManufacturingThis subcontract with the Department of Defense, managed by the ASC Supplier Order OEM Division, involves the manufacturing of compressor disks for aircraft gas turbine engines. The contractor is responsible for delivering 19,000 units of NSN 2840-01-414-3995, utilizing precision machining, fabrication, casting, and forging. All components must adhere to Navy Identified Critical Safety Item standards and strict aerospace tolerances through the use of specialized tooling and high-precision CNC machining. The opportunity is categorized under NAICS code 336413 and was posted on September 29, 2026, with a response deadline of October 29, 2026. The project supports prime contractors operating under DLA Aviation supply contracts to ensure the production of flight-critical engine components.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

28 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334512
Awarded
DIBBS
INDICATOR, TEMPERATU
Solicitation # SPE4A5-26-T-057B
ASC SUPPLIER OPER OEM DIVISION

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 334512
Awarded
Federal
66--THERMOCOUPLE,IMMERS
Solicitation # SPE4A526T3057
DLA Aviation

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 334512
Awarded
Federal
59--SWITCH,THERMOSTATIC
Solicitation # SPE7M826T2737
DLA Land And Maritime

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 334512
Awarded
Federal
59--SWITCH,LIQUID LEVEL
Solicitation # SPE7M426T9697
DLA Land And Maritime

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 334512
Awarded
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-055T
ASC SUPPLIER OPER OEM DIVISION

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 334512
Closed
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-054Z
ASC SUPPLIER OPER OEM DIVISION

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 334512
Awarded
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-056E
ASC SUPPLIER OPER OEM DIVISION

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 334512
Closed
DIBBS
INDICATOR, PRESSURE
Solicitation # SPE4A5-26-T-055G
ASC SUPPLIER OPER OEM DIVISION

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 334512
Closed
DIBBS
SOCKET BASE, FIRE DE
Solicitation # SPE4A6-26-U-2582
ASC COMMODITIES DIVISION

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 334512
Awarded
DIBBS
INDICATOR, PRESSURE
Solicitation # SPE4A5-26-T-052G
ASC SUPPLIER OPER OEM DIVISION

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 334512
Awarded
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-047G
ASC SUPPLIER OPER OEM DIVISION

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 334512
Awarded
DIBBS
INDICATOR, PRESSURE
Solicitation # SPE4A5-26-T-051Y
ASC SUPPLIER OPER OEM DIVISION

POSTED

7 months ago

CLOSED

7 months ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS