This Solicitation opportunity from Department Of Defense was posted on May 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

INDICATOR, SHAFT POS

Closed

SPE4A5-26-T-151XFederal

Submission Closed05/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M4-26-T-376N

This contract solicitation, identified as SPE7M4-26-T-376N, is issued by the Department of Defense Fluid Handling Division for the procurement of eight units of Resonance Channel Pistons, identified by NSN 2010-01-029-9345 and Kingsbury Inc. part number 65-5691-126. This is a critical application item with a required delivery date of December 23, 2027, and a delivery window of 143 days after order. The contract specifies FOB Origin shipping with inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The procurement is subject to strict technical and quality standards, including DLA packaging requirements under RP001 and marking standards per MIL-STD-129. Environmental restrictions are explicitly stated, prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. All packaging and palletization must adhere to MIL-STD-2073-1E and the DLA Master List of Technical and Quality Requirements. Quotes for this solicitation were due by September 11, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-331T

This contract is for the procurement of 120 feet of electrical cable, identified as NSN 1450-01-589-3958 and part number 33307-90072. The item is classified as a Commercial Off The Shelf product with approved sources including Textron Systems Corporation and Southwire Company, LLC. The delivery is required within 117 days, with a need date of September 13, 2026, and is to be shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement specifies a quantity variance of plus or minus 10 percent and requires inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. All technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging standards.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturing and Supply of Non-Magnetic Blade Covers

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-396B

Solicitation SPE7M4-26-T-396B is a total small business set-aside issued by the DLA Land and Maritime Fluid Handling Division for the procurement of two crank pin rings. The required items are identified by NSN 2010012250170 and part number 106042025 from Bird-Johnson Propeller Company, LLC. This is designated as a critical application item with a required delivery date of July 27, 2027, and a need ship date of March 9, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality standards, including a magnetic permeability of 2.0 or less and a prohibition on the intentional addition of mercury per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows DLA requirement RP001. Administrative requirements include a CMMC Level 2 self-assessment, the use of the Wide Area WorkFlow system for invoicing, and compliance with the Buy American Act and Berry Amendment. All quotes must be submitted via the DIBBS system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-394H

This contract, solicitation number SPE7M4-26-T-394H, is a total small business set-aside issued by the Department of Defense Fluid Handling Division for the procurement of three units of a lifting device gear assembly, identified by NSN 2010010328950 and Timken part number 785E544-001. The requirement is managed under purchase request 7018270459 with a delivery timeline of 168 days after order. Delivery is set for FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The agreement incorporates several technical and quality mandates, including DLA packaging requirements RP001, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. Compliance with Cybersecurity Maturity Model Certification CMMC Level 2 and regulations regarding the restriction of mercury and mercury-containing compounds is required. The solicitation was posted on September 10, 2026, with a response deadline of September 21, 2026, and specifies a need ship date of March 9, 2027, and an original required delivery date of November 6, 2027.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-396K

This contract, identified by solicitation number SPE7M4-26-T-396K, is for the procurement of two gear slip rings under NSN 2010012891302. The items are identified as critical application items and correspond to Timken Gears and Services Inc part numbers 577L918-003 and 611C402-077. The procurement is managed by the Department of Defense Fluid Handling Division with a required delivery date of May 18, 2027, and a delivery window of 168 days. Shipping is set as FOB Origin with the final destination being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to several technical and quality standards, including DLA packaging requirements RP001, marking standards MIL-STD-129, and packaging data MIL-STD-2073-1E. It requires a Cybersecurity Maturity Model Certification Level 2 self-assessment and prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required by NAVSEA specifications. All submissions and compliance must align with the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-395E

This contract, solicitation number SPE7M4-26-T-395E, is issued by the Department of Defense Fluid Handling Division for the procurement of one slip ring, part number 611C402-023, used on gear assemblies for main speed. The item is identified by NSN 2010010328954 and is associated with purchase request 7018270447. Delivery is required within 168 days after the order, with a need ship date of March 9, 2027, and an original required delivery date of August 22, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Key compliance requirements include CMMC Level 2 self-assessment, protection of covered defense information, and a prohibition on the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA. The procurement is subject to the Buy American Act and Berry Amendment, and it incorporates technical and quality requirements from the DLA Master List.

FLUID HANDLING DIVISION

POSTED

DEADLINE

SUPPORT, CONTROL HEAD

Solicitation # SPE7M4-26-T-397A

Solicitation SPE7M4-26-T-397A is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of ten units of Support, Control Head, identified by NSN 2010013793567. The requirement is categorized under NAICS 336415, with quotes due by September 21, 2026, via the DIBBS system. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of August 30, 2027, and a need ship date of March 9, 2027. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds unless specifically exempted. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program. Offerors must also provide representations regarding their socioeconomic status and the use of covered defense telecommunications equipment.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-390G

This contract, solicitation number SPE7M4-26-T-390G, is issued by the Department of Defense Fluid Handling Division for the procurement of seven blade covers, identified by NSN 2010-01-225-0164 and Bird-Johnson Propeller Company part number 106052036VM. This critical application item must meet specific technical standards, including a magnetic permeability of 2.0 or less and strict prohibitions against the intentional addition of mercury or mercury-containing compounds, per NAVSEA 5100-003D. The procurement falls under NAICS code 336415 and requires compliance with CMMC Level 2 self-assessment and covered defense information regulations. Delivery is specified as FOB Origin with a delivery window of 168 days after order, targeting a need date of March 9, 2027, and an original required delivery date of November 5, 2027. Supplies are to be shipped to DLA Distribution San Joaquin in Tracy, California. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. The contract incorporates the DLA Master List of Technical and Quality Requirements and mandates the removal of government identification from any non-accepted supplies.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-063G

Solicitation SPE7M0-26-T-063G, issued by DLA Land and Maritime, is for the procurement of five blade covers, identified by NSN 2010-01-225-0164 and Bird-Johnson Propeller Company part number 106052036VM. This critical application item requires a delivery timeframe of five days after order and is shipped FOB Origin, with inspection and acceptance occurring at the destination. The freight shipping address is located at US Naval Base Sasebo in Japan, while the parcel post address is an FPO in the same region. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-129 for marking and RP001 for DLA packaging. Key compliance requirements include a CMMC Level 2 self-assessment, restrictions on the intentional use of mercury, and a magnetic permeability of 2.0 or less. Additionally, the contractor must comply with the Berry Amendment and Buy American Act, and use the Wide Area WorkFlow system for invoicing. Quotes must be submitted via the DIBBS portal, and the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-384X

This contract is for the procurement of two lifting device gear assemblies, identified by NSN 2010010328950 and part number 785E544-001 from Timken Gears and Services Inc. The order is issued by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-384X and is designated as a total small business set-aside. Delivery is required within 20 days, with a final required delivery date of September 8, 2026, shipping FOB origin to the Trident Refit Facility in Kings Bay, Georgia. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking. Key compliance standards include CMMC Level 2 self-assessment, protection of covered defense information, and a prohibition on the intentional addition of mercury or mercury-containing compounds. Inspection and acceptance will occur at the destination, and the supplier must use the fastest traceable shipping means rather than parcel post.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # N0010426QAD28

This contract is a solicitation for the manufacture of a stud, identified as part number 3165323 with cage code 10001. The procurement is managed by the Navsup Weapon Systems Support Mech under the Department of Defense and is designated as a total small business set-aside. Key requirements include a delivery period of 90 days and mandatory government source inspection per FAR 52.246-2. The contractor must adhere to specific technical standards, including ASME-Y14.5M and MIL-DTL-31000, and follow MIL-STD-130 for marking and identification. Quality assurance is the responsibility of the contractor, though the government reserves the right to perform inspections. Payment will be processed via Wide Area Workflow using a combined Invoice and Receiving Report. All technical drawings and specifications are accessible through the SAM.gov portal.

Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 20 days

AI Contract Overview

The contract is for the procurement of two INDICATOR, SHAFT POS units under solicitation SPE4A5-26-T-151X, with a delivery deadline of 158 days after order and a required ship date of November 1, 2026. The items must be delivered FOB Origin to Tracy, California, and are subject to extensive technical, quality, and cybersecurity requirements defined by the DLA Master List of Technical and Quality Requirements. Compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking including barcoding, and MIL-B-117 for bag construction is mandatory, with packaging code U and preservation method 32. Hazardous materials must be labeled per OSHA’s Hazard Communication Standard, and mercury or mercury-containing compounds are prohibited unless used in exempted items such as batteries, fluorescent lights, or specific instruments under NAVSEA 5100-003D, which also requires shock-proof design and secondary containment for portable mercury-containing devices. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required in the sample lot unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. The contractor must implement CMMC Level 2 controls, complete a self-assessment, and safeguard covered defense information per NIST SP 800-171 and 252.204-7012. Physical identification of bare items is required per RQ017, and all non-accepted supplies must have government identification removed. Measuring and test equipment must be calibrated and controlled as per RT001. The solicitation applies to small businesses and includes clauses requiring employment verification, equal opportunity, combating human trafficking, sustainable product use, and accelerated payments to small business subcontractors. Invoices must be submitted electronically via WAWF, and all proposals must be submitted through the DIBBS portal by May 26, 2026, with point of contact Andrew Kish at DLA Aviation, ASC Supplier Oper OEM Division. No contract value is provided as unit pricing and extended costs are not specified in the solicitation.

General Info

Procurement of two shaft position indicators with 158-day delivery, strict quality and cybersecurity standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336415 - Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-151X Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 17

Solicitation

Response DeadlineMay 26

Deadline has passed

Submission Closed

05/26/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressUSA

Contacts

Andrew Kish

contact@example.gov

+1 (555) 000-0000

Full Description

INDICATOR,SHAFT POS
INDICATOR, SHAFT POS.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ADEQUATE DATA FOR THE NSN/Part Number: 2010-01-029-9378 Quantity: 2 EA Purchase Request: 7016646717QTY: 2 Delivery: 158 days ADO