Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INDICATOR SUBASSEMB

Active
SPE4A5-26-T-402ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of four indicator subassemblies under solicitation number SPE4A5-26-T-402Z. The items are identified by NSN 6680-01-479-7820 and are associated with part numbers from Badger Meter Inc and Redington Counters Inc. Delivery is required within 10 days, with the shipment destined for Fort Drum, New York. The contract specifies FOB Origin shipping and designates the inspection and acceptance points at the destination. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331. Notably, the material has no shelf life requirement, and Item Unique Identification is not required. All shipments must be sent via the fastest traceable means, excluding parcel post.

General Info

Procurement of four indicator subassemblies for delivery to Fort Drum within ten days.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

BLDG 4486 CAMP SWIFT ROAD, FORT DRUM, NY, 13602-5000, USA

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-402Z Request for Quotations

PDF•18 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUSA
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INDICATOR SUBASSEMB
INDICATOR SUBASSEMB
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
BADGER METER INC 05105 P/N 57998-00200
REDINGTON COUNTERS INC 28292 P/N 6-4104
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-402Z
SECTION B
PR: 7017858860 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017858860 0001 EA 4.000
NSN/MATERIAL:6680014797820
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W810DR
0548 CS BN CO A COMPOSITE
AWCF SSF
BLDG 4486 CAMP SWIFT ROAD
FORT DRUM NY 13602-5000
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W810DR
0548 CS BN CO A COMPOSITE
AWCF SSF
BLDG 4486 CAMP SWIFT ROAD
FORT DRUM NY 13602-5000
US
MARKFOR
W810DR
0548 CS BN CO A COMPOSITE
AWCF SSF
BLDG 4486 CAMP SWIFT ROAD
FORT DRUM NY 13602-5000
US
M/F: (TCN) W810DR62120213
RDD: 555
SPE4A5-26-T-402Z
SECTION B
PR: 7017858860 PRLI: 0001 CONT’D
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/11/2026
SPE4A5-26-T-402Z NSN/Part Number: 6680-01-479-7820 Quantity: 4 EA Purchase Request: 7017858860QTY: 4 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONAL PI
Solicitation # SPE4A6-26-T-22QF
This contract is for the procurement of 46 units of a motional pickup transducer, identified as a commercial off the shelf item from Kulite Semiconductor Products Inc with part number ITQ-R36-1000-100SG and NSN 6695015368287. The agreement specifies a delivery timeframe of 162 days, with a required delivery date of July 31, 2027, and shipping destined for DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero based sampling plan unless otherwise specified. Inspection and acceptance will occur at the destination, and the supplier must follow the DLA Master List of Technical and Quality Requirements for all physical identification and bare item marking.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSURE
Solicitation # SPE4A0-26-T-4616
This contract is for the procurement of one compound pressure-vacuum dial indicator gage, identified by NSN 6685-01-438-5089. The item is designated as a critical application item and corresponds to Ashcroft Inc part numbers 25-1009SW-02B-XUC-30/0/15 and 251009SW02BXUC30IMV/15PSI. Delivery is required within five days after order, with the final destination and inspection point located in Sioux Falls, South Dakota. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards, including specific marking and labeling per MIL-STD-129. Quality assurance is governed by zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, with specific verification levels assigned for critical, major, and minor attributes. The material has no shelf life requirement and must be shipped via the fastest traceable means, explicitly prohibiting the use of parcel post.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR SUBASSEMBLY,
Solicitation # SPE4A5-26-T-402F
This contract is for the procurement of 22 units of a liquid quantity indicator subassembly, identified by NSN 6680-01-537-6403 and associated with Vega Americas Inc part numbers NAP.SFSII and VE206753. The item is designated as a critical application item with no shelf life requirement. Delivery is required within 171 days, with a need ship date of March 1, 2027, and shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards per ASTM D3951 and MIL-STD-129. Quality assurance will be managed through inspection and acceptance at the origin using sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
METER, TIME TOTALIZI
Solicitation # SPE4A5-26-T-403Z
This contract is for the procurement of 10 units of a time totalizing meter, identified by NSN 6645-01-534-3148 and part number D16G9F. The agreement is a total small business set-aside issued by the Department of Defense through the ASC Supplier Oper OEM Division. Delivery is required within 20 days after the order, with the final destination being the Naval Surface Warfare Center in Port Hueneme, California. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards under MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed via sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where functionally required by specific systems.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7M1-26-T-325T
This solicitation from the Department of Defense Maritime Supply Chain is for the procurement of one power distribution panel, identified by part number 0001S00000052. The contract requires delivery within 935 days after the order is placed and is associated with purchase request 7018067569. Performance is designated for Hill AFB, and the solicitation is categorized under NAICS code 334519. The contract imposes strict cybersecurity and regulatory compliance standards, requiring CMMC Level 2 certification through either a third-party assessment or self-assessment. Additionally, the item contains technical data subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Contractors must have an approved US/Canada Joint Certification Program certification and complete specific DLA export-controlled technical data training to access the necessary documentation.
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
RECEIVER, LIQUID LEV
Solicitation # SPE4A6-26-T-22PK
This contract is for the procurement of eight liquid level receivers, identified by NSN 6680-01-098-2479 and Setra Systems part number 31320-0100. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The required delivery date is July 8, 2027, with a need ship date of February 12, 2027, and a delivery window of 162 days. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129, with a special marking for delicate instruments. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information regulations. Additionally, the contract strictly prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where specifically permitted for functional components.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONAL
Solicitation # SPE4A5-26-T-355W
This contract is for the procurement of 20 motional transducers under solicitation SPE4A5-26-T-355W for the Department of Defense. The items are identified by NSN 6695-01-255-3319 and are designated as critical application items, with approved parts from Parker-Hannifin Corporation and Kavlico Corporation. Delivery is required within 136 days, with a required delivery date of August 3, 2026, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for measuring and test equipment, source approval documentation, and packaging per ASTM D3951 and MIL-STD-129. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contractor must comply with Cybersecurity Maturity Model Certification Level 2 self-assessment and covered defense information requirements. Item Unique Identification is not required for this specific order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A0-26-T-4609
This contract is for the procurement of one dial indicating pressure gage, identified by NSN 6685010466763 and part number SG8NN4HPWRANAG. The item must be manufactured in accordance with basic specification MIL-G-18997E. Delivery is required within 125 days after order, with FOB, inspection, and acceptance all occurring at the origin. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129, specifically noting the item as a delicate instrument. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and compliant with NAVSEA 5100-003D.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A6-26-T-22NC
This contract is for the procurement of three liquid quantity transmitters, identified by NSN 6680-01-214-8194 and Setra Systems part number 42525. The order is managed by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-22NC, with a required delivery date of May 22, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331 sampling plans. Notably, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware and packaging, and it specifies that there is no shelf life requirement for this material.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-403C
This contract is for the procurement of three dial indicating pressure gages, identified by NSN 6685-01-058-1576 and part number 80JX788. The items are designated as critical application items and must be sourced from approved manufacturers such as Ametek or Cotta Transmission Co. Delivery is required within 20 days of order, with the final destination being the USS Michael Monsoor DDG 1001. The contractor must adhere to strict quality and packaging standards, including MIL-STD-129 for marking and RP001 for palletization. Each item requires a temporary tag identifying the contract number, NSN, part number, and rated accuracy. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware or packaging, and sampling must be conducted according to MIL-STD-1916 or ASQ H1331 standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
GAGE ROD-CAP, LIQUID LE
Solicitation # SPE4A6-26-T-26AL
This contract is for the procurement of one liquid level gage rod cap, identified by NSN 6680007808099. The item is classified as a critical application and configuration controlled item, referencing Detroit Diesel Corp drawing SD-1 and part number 5133486. Approved sources include UWD Mfg Inc, Brighton Cromwell LLC, and Rolls-Royce Solutions America Inc. The material has no shelf life requirement, and item unique identification is not required. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be conducted using sampling methods aligned with MIL-STD-1916 or ASQ H1331. Delivery is required within 20 days, with FOB origin for both inspection and acceptance. The shipment is destined for the Ordnance Readiness Development Center in Nantou County, Taiwan.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR, HUMIDITY, PLU
Solicitation # SPE4A5-26-T-389E
This solicitation, identified as SPE4A5-26-T-389E and issued by the Department of Defense via the DLA Aviation ASC Supplier Operations, is for the procurement of 154 units of humidity indicator plugs under National Stock Number 6685-01-371-6810. The contract falls under NAICS code 334519 and requires delivery within 162 days after the order is placed, with the place of performance located in Tracy, California. The agreement incorporates several critical technical and quality requirements, including DLA packaging standards, configuration change management, and inspection and acceptance at origin. Notably, the item contains technical data subject to export controls under ITAR or EAR regulations, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DLA export training. Item Unique Identification is not required for this specific request.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 334511
New
DIBBS
SERVO, INDICATOR
Solicitation # SPE4A5-26-T-256H
The U.S. Department of Defense, through DLA Aviation, is seeking quotes for eight servo indicator units under NSN 6605009655414, with delivery required to W1A8 DLA DISTRIBUTION within 161 days after order award. The procurement is conducted via a requesting for quote (RFQ) with an approved source listed as 28199 A-15280, and no specifications, plans, or drawings are available for reference. All responsible suppliers may submit electronic quotes, and hard copies of the solicitation are not provided; the solicitation must be accessed through the online link provided. The RFQ is open to unrestricted competition under NAICS code 334511 and has no set-aside classification. Quotes must be submitted by the deadline of June 30, 2026, and any inquiries should be directed via email to the designated point of contact listed in the solicitation document, available through the SAM.gov portal. The contract office is located in Richmond, Virginia, and the point of contact email is provided for technical or procedural questions.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
DIBBS
CAP ASSEMBLY
Solicitation # SPE4A5-26-T-402S
This contract is for the procurement of one Cap Assembly, identified by NSN 2835009082527 and Honeywell part number 695332-1. The solicitation, numbered SPE4A5-26-T-402S, is issued by the Department of Defense ASC Supplier Oper OEM Division. The item is designated as a critical application item with a required delivery date of September 4, 2026, and a delivery window of 20 days after order. The agreement mandates strict adherence to DLA technical and quality requirements, including specific standards for packaging, marking, and measuring equipment. Sampling must follow MIL-STD-1916 or ASQ H1331, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129. The final destination for the shipment is the Parts-Attach General Depot in Tainan City, Taiwan, with FOB and inspection points set at the origin.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
CAMERA, INFRARED, IND
Solicitation # SPE4A5-26-T-404H
This contract is for the procurement of seven industrial infrared cameras, identified as NSN 6635015602742 and Honeywell International Inc. part number 3001-1100-FA. Classified as a critical application commercial item, the order is managed under solicitation SPE4A5-26-T-404H with a delivery timeline of 636 days. The items are to be delivered FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, bare item marking, and measuring and test equipment. Compliance with CMMC Level 2 self-assessment and covered defense information protocols is required. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331 sampling methods, and packaging must follow ASTM D3951 and MIL-STD-129 guidelines. Item Unique Identification is explicitly not required for this order.
Precision Turned Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RING, DIAPHRAGM RETAINE
Solicitation # SPE4A5-26-T-403J
This contract is for the procurement of two diaphragm retainer rings, identified by NSN 5365003145932 and Honeywell part number 192929. The order is issued by the Department of Defense under solicitation SPE4A5-26-T-403J with a required delivery date of September 2, 2026, and a delivery window of 20 days. Shipping is FOB Origin, with the final destination being the Parts-Attach General Depot in Tainan City, Taiwan. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. The material has no shelf life requirement, and item unique identification is not required by the service customer.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A5-26-T-402T
This contract is for the procurement of one unit of aircraft skin, identified by NSN 1560-01-208-4425 and Boeing part number L3226905-008. The order is managed under solicitation SPE4A5-26-T-402T with a required delivery date of August 27, 2026, and a delivery timeframe of five days after order. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DD Depot at Tinker AFB. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 self-assessment and covered defense information protocols. Packaging must comply with MIL-STD-129 and RP001, with specific instructions for hazardous and non-hazardous materials. Quality assurance and sampling shall follow MIL-STD-1916 or ASQ H1331, and the contractor must ensure the removal of government identification from any non-accepted supplies.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE4A5-26-T-404D
This contract is for the procurement of 14 shouldered shafts, identified by NSN 3040-01-154-2688 and Honeywell part number 2666968. The item is designated as a critical application item and must adhere to specific technical and quality requirements, including CMMC Level 2 self-assessment and strict measuring and test equipment standards. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sampling plans. Delivery is required within 85 days, with a need ship date of April 17, 2026, and a final required delivery date of May 22, 2026. Shipping is FOB Origin to DLA Distribution Jacksonville, Florida. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The contract specifies no quantity variance and requires the removal of government identification from any non-accepted supplies.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
HOUSING, TUBE, MOVING
Solicitation # SPE4A5-26-T-402P
This contract is for the procurement of eight units of moving tube housings, identified by NSN 1680015972356 and part number SYLC-1682-1 from GE Aviation Systems LLC. The order is designated as a critical application item with a delivery timeline of 154 days, specifying a need ship date of February 12, 2027, and a final required delivery date of August 7, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to DLA technical and quality requirements, including specific standards for packaging, marking, and palletization such as ASTM D3951 and MIL-STD-129. Quality assurance will be governed by sampling methods aligned with MIL-STD-1916 or ASQ H1331, emphasizing a zero-nonconformance policy for sample lots. The contract also incorporates higher-level quality requirements regarding government identification removal and physical item marking to ensure compliance with federal procurement standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333618
New
DIBBS
LOCK, VALVE SPRING RETA
Solicitation # SPE4A5-26-T-404E
This contract is for the procurement of six valve spring retainer locks, identified as commercial items under NSN 2805010030884 and Meggitt Aerospace part number AC025011. The agreement specifies a delivery timeframe of 251 days with a required delivery date of May 20, 2027. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Item Unique Identification is not required for this order. All technical and quality requirements are governed by the DLA Master List.
Other Engine Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
CHAIN, WELDED
Solicitation # SPE4A5-26-T-402D
This contract is for the procurement of welded carbon steel chain, trade size 3/8 inch, Type I Class 4. The total quantity requested is 23 drums, with each drum containing 400 feet of chain. The items are identified under NSN 4010-00-184-3476 and must adhere to the technical specifications of RR-C-271H(1). Delivery is required within 171 days, with specific shipments destined for DLA Distribution centers in Jacksonville, Florida, and New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be conducted using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. A critical requirement is the prohibition of mercury or mercury-containing compounds in the hardware, preservation, packaging, and marking. The terms specify FOB Origin for both inspection and acceptance.
Other Fabricated Wire Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
CHAIN, WELDLESS
Solicitation # SPE4A5-26-T-403Q
This contract is for the procurement of 25 units of weldless chain, identified by NSN 4010000553129 and specified as Type II, Class 6 under RR-C-271H(1). The order is designated as a critical application item and must adhere to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. The delivery is set for 38 days after the order is placed, with shipping handled FOB Origin to Industries of the Blind Inc in Greensboro, North Carolina. Quality assurance will be conducted at the destination using sampling methods aligned with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance.
Other Fabricated Wire Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A5-26-T-403F
This contract is for the procurement of 18 flat washers, identified by NSN 5310-00-680-7848 and Hamilton Sundstrand Corporation part number 81831. The item is classified as a critical application commercial item. Delivery is required within 20 days after receipt of order, with the shipping destination being the Parts-Attach General Depot in Tainan City, Taiwan. The contract specifies a zero percent quantity variance and designates the point of inspection and acceptance as the origin. Compliance is required across several technical and quality standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements. While the item is subject to specific documentation for source approval and measuring equipment standards, item unique identification is not required by the service customer.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
TOOTH, BEARING WRENC
Solicitation # SPEA45-26-T-402Q
This contract is for the procurement of 20 units of bearing wrench teeth, identified by NSN 5120010461818 and RTX Corporation part number PWA50628-2. The order is managed under solicitation SPE4A5-26-T-402Q with a required delivery date of August 7, 2026, and a delivery timeframe of 5 days. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination in New Orleans, Louisiana. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance will be conducted using zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Notably, the item does not have a shelf life requirement, and item unique identification is not required. Because the manufacturing process may involve casting or forging, contractors are advised to seek assistance through DLA engineering channels if special tooling is required.
Saw Blade and Handtool Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details