Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INDICATOR TUBE, GAS

Active
SPE2DS-26-T-310UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 50 boxes of indicator tubes designed for carbon monoxide detection, with each box containing ten tubes capable of measuring concentrations between 2 and 300 parts per million. The units must be packaged in sealed commercial containers that protect against damage or breakage, and shipped in exterior containers suitable for safe transport by common carriers at the lowest possible rate to the delivery point specified in the contract. All packaging and marking must comply with the Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of the standard are available through DLA Troop Support or its official website. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the type of acquisition. The contract includes DLA packaging requirements, provisions for removal of government identification from non-accepted supplies, and potential applicability of covered defense information. The National Stock Number is 6665-01-645-8677, the solicitation number is SPE2DS-26-T-310U, and delivery is required within 20 days of order placement. The contracting office is the Department of Defense’s Medical Supply Chain, with the point of performance located at FPO, ZIP 96679, and primary contact information provided through Olusola Emmanuel at DLA.

General Info

Procure 50 boxes of carbon monoxide indicator tubes, 10 per box, 2–300 ppm, compliant packaging, delivered in 20 days to FPO 96679.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

UNIT 100171 BOX 1, FPO, AP, 96679, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-310U.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Olusola Emmanuel
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INDICATOR TUBE,GAS
TUBE GAS DETECTOR TUBE CARBON MONOXIDE 2/A, 2-300 PPM<(>,<)>
UNIT OF ISSUE BOX (10 EA/BX)
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6665-01-645-8677 Quantity: 50 BX Purchase Request: 7017739179QTY: 50 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
ALARM, GAS, AUTOMATIC
Solicitation # SPE7M1-26-T-250L
The contract pertains to the procurement of 307 units of an automatic gas alarm with NSN 6665-01-499-7234 under solicitation SPE7M1-26-T-250L, issued by the Department of Defense’s Maritime Supply Chain division. The solicitation is a total small business set-aside, with responses due by August 17, 2026, and requires delivery within 13 days after award. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, where revisions in effect at the time of solicitation issue or award govern compliance. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except under specific exemptions for functional uses such as batteries, fluorescent lights, weapons systems, or authorized instruments, with portable devices containing mercury required to be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, as no existing data is available. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Misty Slone, reachable via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
ROD SCRAPER
Solicitation # SPE8E6-26-T-3995
The contract pertains to the procurement of 10 units of ROD SCRAPER, identified by NSN 6930-00-516-8503 and part number 5030-2-1/2, under solicitation SPE8E6-26-T-3995. Delivery is required within 167 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The unit of issue is each, with a fixed quantity of 10 units and no variance allowed. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements supersede this standard; all items must be marked and labeled per MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The item is subject to restrictions on ozone-depleting substances, and covered defense information rules may apply. Delivery must be made to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with a required ship date of February 1, 2027, and an original delivery deadline of October 29, 2026. Transportation instructions are governed by DLAD Proc Note C19 for general transport and C20 for first destination. The contract is issued by the Department of Defense via the DDSP New Cumberland Facility, with point of contact Sophia Lim reachable at dla-ts-fcfb.inquiry@dla.mil or 215-528-7481.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
LAMP
Solicitation # SPE8E9-26-T-3345
The contract pertains to the procurement of 61 lamps identified by NSN 6240014703322 and part number 998502-13, supplied by Welch Allyn Inc LAMP Division and Control Products Corporation, under solicitation SPE8E9-26-T-3345. The unit price is $61.00 per each, resulting in a total contract value of $3,721.00, with delivery required FOB origin within 41 days of contract award, no variance permitted in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA Master List of Technical and Quality Requirements, superseding ASTM D3951 where applicable. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA packaging standards, with hazardous material handling governed by TQ requirement IP025 if applicable. The delivery destination is Industries of the Blind Inc in Greensboro, NC, and the original required delivery date is January 17, 2027, with a needed ship date of September 28, 2026. Transportation logistics are governed by DLAD Proc Notes C19 and C20, and the unit of issue is EA as specified. The procurement falls under the Department of Defense’s Construction & Equipment MRO SVC I agency and is classified under NAICS code 334519. All technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements are binding and take precedence over any general standards. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and point of contact for inquiries is Matthew Kruc via email and phone. The contract requires strict compliance with federal packaging and handling protocols, ensuring compatibility with DLA’s logistics systems and authorized units of issue as defined by the official X12 conversion table. No set-aside type is specified, and the procurement process follows standard DLA procedures for federal acquisition.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
MODULE ASSEMBLY, FRE
Solicitation # SPE4A5-26-T-331C
This contract pertains to the procurement of one unit of a Module Assembly, Frequency, with NSN 6110-00-885-2327 and part number 690416, supplied by Hamilton Sundstrand Corporation under contract SPE4A5-26-T-331C. Delivery is required within 170 days from the award date, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The item is not subject to Item Unique Identification per government request, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede any conflicting standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization in accordance with DLA Packaging Requirements, and all markings and labeling must adhere strictly to applicable military standards. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must comply with Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and manage configuration changes through Engineering Change Proposals or formal variance requests. Removal of government identification from non-accepted supplies is required, and measuring and test equipment must meet specified standards. The delivery address is DLA Distribution Depot Hill in Hill AFB, Utah, with a final ship date of January 31, 2027 and an original required delivery date of May 21, 2028. The unit of issue is each (EA), with no quantity variance permitted, and all documentation and compliance responsibilities are binding under the terms outlined in the solicitation.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ALARM, GAS, AUTOMATIC
Solicitation # SPE7M1-26-T-250J
The contract is for the procurement of 185 units of an automatic gas alarm identified by NSN 6665-01-499-7234 under purchase request 7015538145, with a delivery requirement of 13 days after order placement. The solicitation number is SPE7M1-26-T-250J, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with a response deadline of August 17, 2026. The technical requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revision control depending on the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision in effect on the RFP issue date unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or equipment, unless exempted for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Offerors must provide a complete data package covering both the approved and alternate parts, as no existing data is available for this item. The place of performance is Tracy, California, with Misty Slone listed as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
GAGE, CANNON BORE EROSI
Solicitation # SPE8E5-26-T-3807
The contract pertains to the procurement of 72 units of a GAGE, CANNON BORE EROSION item with NSN 5210-01-329-4860 under solicitation SPE8E5-26-T-3807, issued by the Defense Logistics Agency through the DDSP NEW CUMBERLAND FACILITY. Delivery is required within 229 days from award, and responses must be submitted by August 17, 2026. The item is subject to stringent technical and quality requirements incorporated by reference from the DLA Master List, including tailored higher-level contract quality standards applicable to both manufacturers and non-manufacturers. Configuration change management is mandatory, requiring formal engineering change proposals and variance requests for any deviations. The item must be uniquely identified in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause, ensuring proper tracking through the Item Unique Identification system. The technical data associated with this item is subject to export control under either ITAR or EAR, and its disclosure to foreign persons—whether inside or outside the U.S.—is strictly prohibited without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DLA training on handling export-controlled technical data and received explicit approval from the DLA controlling authority. Additionally, the contractor must maintain Cybersecurity Maturity Model Certification Level 2 by a certified third-party assessment organization and comply with all requirements related to covered defense information. Packaging must conform to DLA-specific procurement standards, and the solicitation applies to federal procurement under NAICS code 334519 with no set-aside classification.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
METAL DETECTOR
Solicitation # SPE8E8-26-T-5019
The contract is for the procurement of 132 portable metal detectors from Garrett Electronics Inc, under solicitation SPE8E8-26-T-5019, issued by the Defense Logistics Agency District San Joaquin. The item is identified by NSN 6350-01-520-7353 and must be delivered FOB origin within 167 days, with a required ship date of February 1, 2027. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization follows DLA packaging standards. The contract prohibits intentional introduction of mercury or mercury-containing compounds into the hardware, except for functional uses in batteries, lighting, sensors, or specified instruments consistent with NAVSEA 5100-003D, which also mandates shock-proof design and secondary containment for any mercury-containing portable lamps or instruments. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, accessed via the official DLA website, with revisions in effect on the solicitation issue date controlling. The purchase request number is 7017757938 with zero variance allowed on quantity, inspection and acceptance occur at the destination. Delivery is directed to the DLA warehouse in Tracy, California, and transportation follows DLA procedural notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 334519, with a response deadline of August 17, 2026, and is publicly accessible through the DIBBS system.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE8E7-26-T-3489
The contract pertains to the procurement of 197 incandescent lamps identified by NSN 6240-01-579-0645 and part number 90C02-7652-01, sourced from CAGE-coded suppliers including Carrier Corp and IMECO INC, with mandatory compliance to DLA’s Master List of Technical and Quality Requirements, which overrides general standards like ASTM D3951. Packaging must adhere to RP001 DLA requirements and MIL-STD-129 for marking and labeling, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. Delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must be delivered within 91 days of contract award, with an original required delivery date of April 14, 2027, and an updated need ship date of August 5, 2026. The consignee is Arizona Industries for the Blind in Phoenix, AZ, and transportation logistics follow DLAD Proc Notes C19 and C20. The solicitation number is SPE8E7-26-T-3489, with a response deadline of August 17, 2026, under a federal procurement by the Defense Logistics Agency, and the unit of issue is each (EA) at a unit price of $197.00 for a total contract value of $38,809. All packaging, labeling, and documentation must reflect the specified QUP and U/I, and Covered Defense Information provisions apply.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
Federal
CryoStat System
Solicitation # N0017326Q5267
The Naval Research Laboratory intends to award a sole source purchase order to MONTANA INSTRUMENTS for the CRYOSTAT ADVANCE-50 SYSTEM WITH ACCESSORIES, acknowledging that no other supplier can meet its specific requirements. This action is justified under Federal Acquisition Regulation 12.201-1, utilizing Simplified Acquisition Procedures for a transaction anticipated to remain under the $350,000 threshold. The procurement falls under NAICS code 334519 with a size standard of 600 employees and is classified under Federal Supply Code 6640. Any interested party may submit information demonstrating their capability to fulfill the requirement and provide evidence that competitive sourcing would benefit the government, but only if submitted within fifteen calendar days of the notice publication. Responses must clearly prove that competition would be advantageous; failure to do so will not alter the intent to proceed with the sole source award. No costs incurred in responding to this notice will be reimbursed. The point of contact for all correspondence is Richard Key, reachable at richard.a.key2.civ@us.navy.mil, and all communications must reference the Notice of Intent number in the subject line.
Naval Research Laboratory

POSTED

about 7 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
Federal
CYROGENIC FROSTPOINT HYGROMETER WITH INLET TUBE AND LITHIUM METAL BATTERIES - QTY SEVENTEEN (17)
Solicitation # 145022-26-0008
The National Oceanic and Atmospheric Administration’s Air Resources Laboratory intends to award a sole-source purchase order to JH Acquisition, doing business as EN SCI, for seventeen cryogenic frostpoint hygrometers with inlet tubes and lithium metal batteries, to be delivered to Riverdale, Maryland. This procurement is justified under FAR 6.103-1 because JH Acquisition is the sole manufacturer and distributor of this specialized equipment, making competition impractical. The contract has a 45-day delivery window beginning on the date of award, and the associated NAICS code is 334519. Although the solicitation is designated as a Small Business Set Aside in type, the sole-source nature overrides any set-aside intent, as no other vendors can meet the technical requirements. The primary point of contact for inquiries is Barbara Shifflett of NOAA/ARL, with a response deadline for any substantiating documentation or requests for additional information set for August 14, 2026. No competitive bidding is currently planned, and the government retains full discretion to proceed as a sole-source transaction regardless of any external submissions.
National Oceanic And Atmospheric Administration

POSTED

about 7 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334519
New
Federal
Twenty-two (22) 81000RE R.M. Young Brand 3 Axis Ultrasonic Anemometers and cables
Solicitation # 145022-26-0004
This solicitation seeks the procurement of twenty-two brand-new 81000RE R.M. Young 3 Axis Ultrasonic Anemometers, each accompanied by a 36-foot data cable, for use in measuring horizontal and vertical wind speed, direction, and variability to support emergency response plume modeling and atmospheric stability analysis. The requirement is strictly for the specified brand name, with no refurbs accepted, and all offered products must comply with Buy American requirements, including verified country of manufacture. The acquisition is set aside for small businesses under NAICS code 334519, with a size standard of 600 employees, and will be awarded as a firm fixed-price purchase order on an all-or-none basis using a low-priced, technically acceptable evaluation. Delivery must be FOB Destination to NOAA/ARL/SORD in North Las Vegas, Nevada, no later than October 15, 2026, with shipping and tariff costs included. Quotes must be submitted electronically by 12:00 noon EST on August 11, 2026, to Barbara Shifflett at NOAA, and offerors are responsible for confirming receipt. Payment terms are Net 30, and invoices must be billed monthly in arrears via IPP with both monthly and annual pricing for all base and option years provided. The estimated contract value is $98,835. The anemometers must meet technical specifications including a -50 to 50°C operational range, 1% wind speed and 2% temperature accuracy, 32Hz sampling rate, RS-232 data transmission at 38400 baud, and low power consumption at 110mA between 12-24VDC, featuring an omni-directional design with an elongated neck to reduce flow distortion. The solicitation is issued as a combined synopsis and RFQ under FAR Part 12, and while it references FAR 8.405-6 for the brand-name restriction, no additional contract clauses, evaluation factors, packaging specifications, or inspection criteria are detailed in the available documentation.
Department Of Commerce Noaa

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334519
New
DIBBS
Precision Pressure Gage ManufacturingThe contract pertains to the manufacture and delivery of a precision pressure dial indicating gage, identified by NSN 6685-01-165-8961, built to meet strict military specifications. The required unit is modeled after P/N 11006 from 3D Instruments, LLC DBA Sierra, an approved supplier, ensuring compliance with performance, durability, and accuracy standards mandated for military applications. This is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses certified by the SBA, with the NAICS code 334519 indicating classification under Other Instrument Manufacturing. The procurement is managed by the ASC Commodities Division under the Department of Defense, with a response deadline of August 18, 2026, and the solicitation posted on August 4, 2026. Delivery locations and point of contact details are not specified in the provided data, but performance is expected to align with defense logistics requirements.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 325413
New
DIBBS
CONTROL, RESPIRATORY PA
Solicitation # SPE2DS-26-T-311F
The BioFire RP2.1/RP2.1plus Control Panel is a synthetic nucleic acid-based quality control product consisting of 12 vials, each containing 300 microliters of a non-infectious buffer solution with stabilizers and preservatives. It is designed for in vitro use with the FilmArray instrument to monitor the detection and identification of respiratory pathogens during RP2.1 panel testing. Each kit provides sufficient reagent for six quality control runs, including six positive and six negative controls. The product requires strict frozenstorage between -25°C and -15°C (-13°F to 5°F) and has a non-extendable shelf life of 18 months, with no more than two months allowed to have passed from the date of manufacture to delivery to the government. Labeling must include the date of manufacture, expiration date, contract number, and lot number in compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards, ensuring protection against damage, with exterior containers suitable for safe transport at the lowest cost to the specified delivery point. The item is governed by DLA technical and packaging requirements, including RS013 for shelf life, RP001 for packaging standards, and RD003 for potential covered defense information. The National Stock Number is 6550-01-690-4435, with a procurement quantity of three kits under solicitation SPE2DS-26-T-311F, with a delivery deadline of 83 days after award.
In-Vitro Diagnostic Substance Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GLOVE, PATIENT EXAMININ
Solicitation # SPE2DS-26-T-311L
The contract specifies the procurement of 10 packages, each containing 100 black, latex-free, powder-free nitrile exam gloves designed for special-forces operations. Each glove is large size, ambidextrous, non-sterile, and features a beaded cuff with a micro-roughened finish to enhance grip. The gloves have a palm thickness of 0.16 plus 0.03 millimeters, a palm weight exceeding 105 millimeters, and a length of 240 millimeters, classified as heavy-gauge for durability in demanding environments. The unit of issue is a package of 100 gloves, and the total quantity requested is 10 packages. Compliance with DLA packaging requirements and technical specifications referenced in the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date. The government identification on non-accepted supplies must be removed per RQ011. The NSN is 6515-01-515-0197, associated with purchase request 7017754214, and delivery is required within five days of award. The solicitation, identified as SPE2DS-26-T-311L, was posted on August 5, 2026, with responses due by August 11, 2026, under NAICS code 339113 for medical device manufacturing. Performance is required at Fort Bragg, North Carolina, with primary point of contact Aidan Martz at the Department of Defense’s Medical Supply Chain.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, CARBON DIOXID
Solicitation # SPE2DS-26-T-310Q
The contract specifies the procurement of two carbon dioxide gas detectors, identified by NSN 6515-01-588-7389, for delivery to Fort Wainwright, Alaska, with a strict five-day absolute delivery obligation. Each unit must be individually sealed in a protective container to prevent damage or breakage and packed in commercial exterior shipping containers suitable for safe transport via common carrier at the lowest possible cost, with export packaging required if necessary. All packaging and marking must comply fully with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and bidders are required to clearly state the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Brooke Webb as the primary point of contact. RD003 indicates potential covered defense information, and all supplies must adhere to DLA packaging requirements and the rule requiring removal of government identification from non-accepted items.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SUPPORT, ARCH
Solicitation # SPE2DS-26-T-311E
This contract solicits a pair of full-length corrective arch support devices designed for men’s sizes 10–11 and women’s sizes 11–12, to be worn inside shoes. The items are green in color and must meet technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. The product is identified by NSN 6515-01-387-2743 and is requested in a quantity of two units, with delivery required within 84 days of award to APO ZIP 09227-0000. Bidders must clearly state the source and part number being supplied and comply with DLA packaging requirements, as well as the provision for removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-311E, issued under NAICS code 339113 by the Department of Defense’s Medical Supply Chain organization, with a response deadline of August 11, 2026, and point of contact Elizabeth Cruz for inquiries. Covered defense information may apply, and all submissions must adhere to the specified acquisition protocols.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE, IRRIGATING
Solicitation # SPE2DS-26-T-311K
The item is a 60 cc irrigating syringe with dual graduations—marked in 5 cc increments up to 60 cc and in 1/4 oz increments up to 2 oz—featuring a catheter tip designed for surgical use in operating room procedures. It is autoclavable and supplied in hard pack, ensuring sterility and durability under repeated sterilization. Each unit must be individually sealed in a protected container to prevent damage or breakage, and shipped in commercial exterior containers suitable for safe transportation via common carriers at the lowest cost to the specified delivery point, which is Point Mugu, CA, 93042-0001. The packaging and marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and full compliance documentation is accessible through DLA Troop Support. The unit of issue is a package of 100 syringes, and the item carries a non-extendable 24-month shelf life as a Type I (Code M) item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date. The item is covered under Defense Information regulations and must be supplied with accurate source and part number information. The contract is issued under solicitation SPE2DS-26-T-311K with a bid deadline of August 11, 2026, and a delivery requirement of 20 days after order placement.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEOSTOMY
Solicitation # SPE2DS-26-T-311B
The contract specifies the procurement of two Shiley Adult Flexible Tracheotomy Tubes with TaperGuard Cuff, each featuring a single cannula design, an inside diameter of 7.5 mm, an outside diameter of 10.8 mm, and an inner cannula inside diameter of 6.5 mm, with a cuff resting diameter of 25.4 mm. These are disposable, sterile, and must meet stringent shelf life requirements, including a maximum of 72 months from manufacture to expiration and no more than 10 months elapsed from manufacture to delivery to the government. The tubes are identified by NSN 6515-01-735-1484 and must be sourced with the exact part number, as specified in the solicitation. Packaging and delivery must comply with DLA Packaging Requirements, and all technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. The contract is issued under solicitation SPE2DS-26-T-311B, with bids due by August 11, 2026, and delivery required within five days of award to the designated performance location at JBER, Alaska, 99506-4400. The primary point of contact is Brooke Webb from the Department of Defense’s Medical Supply Chain, and all submissions must remove any government identification from non-accepted supplies as per RQ011 requirements.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
GLOVES, CHEMICAL PROTEC
Solicitation # SPE2DS-26-T-310R
The gloves are chemical protective, made of nitrile, and designed to be disposable, non-sterile, powder-free, latex-free, silicone-free, and antistatic with a chlorinated surface and smooth exterior. They feature a beaded cuff, are colored green, and measure 240 millimeters or 9.5 inches in length with a palm thickness of 0.12 millimeters or 4.7 mils and finger thickness of 0.16 millimeters or 6.2 mils. Each unit is packed in a box containing 100 gloves and must comply with DLA packaging and technical requirements as specified in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The government identification must be removed from any non-accepted supplies. The item is identified by NSN 6515-01-693-8297 with a purchase request number of 7017739038, quantity of one box, and a delivery requirement of 20 days after award. The solicitation number is SPE2DS-26-T-310R, issued on August 5, 2026, with responses due by August 11, 2026, under NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain MD Surg FSF office located in San Antonio, Texas, with Aidan Martz as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CUFF, SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-311C
The contract specifies the procurement of a pediatric non-invasive blood pressure cuff with specific bladder dimensions: 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. The item is identified by NSN 6515-01-593-8773 and is a replacement for earlier part numbers 6515-01-582-4060 and 6515-01-582-4072. The unit of issue is each (EA), with a total quantity of four units required, delivered FOB destination within 20 days of the contract award. The product must meet strict packaging and marking standards per Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must comply with ASTM D3951 and DLA’s Packaging Requirements for Procurement (RP001). All items must be sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate. Labeling, palletization, and handling must adhere to DLA requirements, and parcel post is explicitly prohibited; shipment must be traceable. The delivery point is a Department of Defense facility in San Antonio, Texas, with the government specifying that no government identification may be removed from non-accepted supplies. The contract references the DLA Master List of Technical and Quality Requirements as the governing standard, with precedence over any other specifications. The supplier, Philips North America LLC, is identified by part number 40401B, and the solicitation number is SPE2DS-26-T-311C with a required delivery date of August 6, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
RETAINER, TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-310Y
The contract specifies the procurement of a single unit of a tracheal tube retainer compatible with the Save Ventilator identified by NSN 6515-01-571-1689, manufactured by Laerdal and listed under NSN 6515-01-588-5834. The item is designated for use in medical acquisitions and must be packaged in commercial containment that ensures protection against damage or breakage, with all units sealed in appropriate individual containers and grouped in exterior shipping containers suitable for safe transport via common carriers at the lowest cost to the delivery point in Fort Wainwright, Alaska. All packaging and marking must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of this standard are available through DLA Troop Support. The item is subject to technical and quality requirements outlined in the DLA Master List, and the applicable revision of that list is determined by the solicitation or award date. The solicitation, issued under SPE2DS-26-T-310Y, requires responses by August 11, 2026, with a five-day delivery deadline after award. The contracting office is the Department of Defense’s Medical Supply Chain MD Surg FSF, and primary point of contact is James Burke.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 621410
New
DIBBS
PLASMA CONTROL, NORMAL
Solicitation # SPE2DS-26-T-310P
PLASMA CONTROL, NORMAL LEVEL is a quality control solution designed for citrated plasma samples used in prothrombin time and activated partial thromboplastin time coagulation testing. It is intended exclusively for use with citrated PT and APTT cuvettes on the Coagulation Analyzer NS 6630 and comes in a kit of 15 vials packaged in 4 sleeves. The product must be stored refrigerated between 2 and 8 degrees Celsius and has a non-extendable shelf life of nine months. It is classified as a Type I (Code G) medical item regulated by the FDA and requires proper handling, labeling, and packaging in compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is supplied by WERFEN USA LLC under part number 000DCJCPT-N and is identified by NSN 6550-01-519-7696. The contract specifies delivery within five days FOB destination with zero tolerance for quantity variance and inspection and acceptance occurring at the delivery point. Packaging must meet MIL-STD-2073-1E standards, ensuring protection during transit via commercial carriers at the lowest cost, with exterior containers suitable for export if required. All supplies must be marked in accordance with MMS No. 1, and government identification must be removed from non-accepted items. The solicitation number is SPE2DS-26-T-310P with a response deadline of August 11, 2026, and the procurement is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at JBER, AK. Bidder information including manufacturer details and part numbers must be provided during submission.
Family Planning Centers

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-311D
This tracheal tube is designed exclusively for veterinary use and is manufactured from clear medical-grade PVC with an inner diameter of 11 millimeters (33 French) and a total length of 520 millimeters. The device features a specially engineered high-volume, low-pressure cuff that is firmly secured, along with a pilot balloon equipped with a spring-loaded one-way valve for reliable inflation control. It includes a non-tapered standard 15mm connector, a beveled tip with a Murphy eye to reduce the risk of obstruction, and clear insertion depth indication marks with 1cm graduations for precise placement. The tube is radiopaque for enhanced visibility under imaging and is supplied in sterile packaging. Shelf life is strictly regulated at 36 months from date of manufacture, with no more than five months allowed to have elapsed between manufacturing and government delivery. The unit of issue is each, and the item is identified by NSN 6515-01-733-0824 with a procurement quantity of 10 units. The contract, issued under solicitation SPE2DS-26-T-311D by the Department of Defense’s Medical Supply Chain under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF, requires delivery within 20 days of award to San Antonio, Texas, 78226. The solicitation was posted on August 5, 2026, with responses due by August 11, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I codes, and packaging must comply with DLA standards. Government identification must be removed from any non-accepted items. The NAICS code 339112 confirms classification under Surgical and Medical Instrument Manufacturing. Primary point of contact is Patrick Esposito, reachable via email and phone listed in the contract data.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, NASOPHARYNGEAL
Solicitation # SPE2DS-26-T-310S
The contract specifies the procurement of 84 disposable, sterile nasopharyngeal airways made of plastic with a 7 mm diameter and 28 FR size, designed exclusively for emergency airway passage. Each unit must have a shelf life of 60 months, and no more than nine months may have elapsed between the manufacturer’s production date and the delivery date to the government. The item is identified by NSN 6515-01-444-5416 and is sold in units of each. Bidders are required to state the source and part number they are supplying. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. The solicitation number is SPE2DS-26-T-310S, with responses due by August 11, 2026, and a delivery requirement of five days after award, to be performed at Fort Bragg, North Carolina, with the contracting agency being the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details