Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Industrial Booth Fabrication & Manufacturing

Active

Federal

Response Deadline10/22/2026, 03:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Industrial Booth Fabrication and Manufacturing involves the construction of a physical sanding booth and an integrated air shower booth for prime contractors supporting DLA Aviation projects at FRCE in Cherry Point. The scope of work requires the fabrication of a structure measuring 40 by 20 by 10 feet, which must be rated Class II Division I for explosion proofing. Additionally, the contractor is responsible for installing acoustic sound quilts that provide a 21dB reduction and meet ASTM E-84 Class I standards, as well as integrating the air shower booth to facilitate operator decontamination. The project falls under NAICS code 332312 and is managed under the Department of Defense. The contractor is expected to deliver the fully completed booth and air shower system. Interested parties should note the response deadline of October 22, 2026.

General Info

Fabricate explosion-proof sanding and air shower booths for DLA Aviation by October 2026.

Agency

Department Of Defense → DLA Aviation

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Cherry Point, NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 27-30-1600.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

C-130 Sanding Booth with Allen Bradley Control System and GVS-RPB Safety Respirator System

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 6

subcontract

Response DeadlineOct 22

Submission deadline

Response Deadline

10/22/2026, 03:59:00 AM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA Aviation

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures the physical structure of a sanding booth and connected air shower booth for prime contractors on DLA Aviation projects at FRCE. Fabricates a 40' x 20' x 10' booth, installs acoustic sound quilts (21dB reduction, ASTM E-84 Class I), and integrates an air shower booth for operator decontamination. Structure must be rated Class II Division I for explosion proofing. Delivers the completed booth and air shower booth.

Similar Contracts

Same NAICS industry code

Steel Piling SupplyThis subcontract opportunity with Manson Construction Co. involves the supply, fabrication, and delivery of combination steel pipe piles and steel sheet piles for marine development projects at the Port of Tampa Bay. The selected contractor will be responsible for providing heavy steel piling components and ensuring all completed materials are delivered directly to the project site to support prime contractors. The solicitation is specifically set aside for Small Businesses and Disadvantaged Business Enterprises under the Department of Transportation. Interested parties must submit their responses by October 16, 2026, for this project categorized under NAICS code 332312.

Manson Construction Co.

POSTED

about 11 hours ago

DEADLINE

Refuse Container Provision and MaintenanceThis subcontract through the Department of University of Hawaii involves the provision and maintenance of industrial waste containers for prime contractors operating on the University of Hawaii at Hilo campus. The selected provider is responsible for supplying a fleet of clean, sanitary containers labeled as REFUSE according to university standards, as well as providing all necessary cleaning equipment. Maintenance duties include painting, damage repair, and comprehensive sanitization using approved disinfectants through methods such as washing, scraping, and steam cleaning. The solicitation was posted on October 6, 2026, with a response deadline of October 28, 2026, falling under NAICS code 332312.

Department of University of Hawaii

POSTED

about 17 hours ago

DEADLINE

Guardrail Material SupplyThis subcontract focuses on the supply of galvanized steel guardrail components for prime contractors working on Texas Department of Transportation maintenance projects specifically within Scurry County. The scope of work involves the procurement or fabrication of W-beams, Thrie-beams, posts, and mounting hardware, all of which must strictly adhere to ASTM standards and TxDOT material specifications. The selected provider is responsible for delivering the required quantities of beams and hardware directly to designated project sites or TxDOT storage areas. This opportunity is categorized under NAICS code 332312, with a response deadline set for October 29, 2026.

Texas Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Cable Barrier Hardware SupplyThis subcontract for Cable Barrier Hardware Supply involves the provision of raw materials and hardware for prime contractors working on Texas Department of Transportation maintenance projects within Taylor County. The scope of work includes the delivery of high-tensile steel cables, galvanized steel posts, and specialized fasteners to either the project site or the prime contractor's facility. The supplier is responsible for ensuring that all delivered quantities of cable barrier hardware strictly adhere to TxDOT material specifications and quality standards. This opportunity was posted on October 6, 2026, with a response deadline of October 29, 2026.

Texas Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Custom Metal Fabrication and Pipe CradlesThis subcontract involves the fabrication and installation of custom metal supports and pipe cradles for prime contractors working on Atlantic County Utilities Authority facility projects at the City Island Treatment Plant. The scope of work requires the use of 316 stainless steel hardware in accordance with Section 05500 and ASTM A240 stainless steel standards, necessitating the use of professional welding and metal cutting equipment. The project is managed under the Engineering agency in New Jersey and falls under NAICS code 332312. Interested parties must submit their responses by the deadline of November 4, 2026, to provide the required fabricated components and installation services.

POSTED

about 18 hours ago

DEADLINE

Solicitation # 48986

The City of Piqua, Ohio, is soliciting bids for solicitation number 48986, titled 24-17.9C, regarding the procurement of steel structures. The scope of work involves furnishing the necessary steel structures for the Piqua 69kV The Site Substation and the Washington Road 69kV Transmission Line. The engineer's estimate for this project is 680,000 dollars. Interested parties must submit their responses by the deadline of October 21, 2026, at 3:00 PM. This project falls under NAICS code 332312 and is managed by the City of Piqua within the state of Ohio.

POSTED

about 18 hours ago

DEADLINE

Custom Metal Fabrication for Van CagesThis subcontract for Custom Metal Fabrication for Van Cages involves the production of third row cage sliders and associated brackets for transportation van projects managed by the Orange County Sheriff-Coroner. The fabrication process requires the use of square tubing and 16-gauge sheet metal, with the integration of Lexan polycarbonate panels and the inclusion of vent holes. All work must be performed in strict compliance with California state manufacturing standards. The project is categorized under NAICS code 332312 and requires the delivery of the completed slider assemblies and brackets to the prime contractors. Interested parties should note that the response deadline for this opportunity is October 30, 2026.

Sheriff-Coroner

POSTED

about 20 hours ago

DEADLINE

Water Break Tank Equipment SupplierThis subcontract agreement appoints a supplier to provide two water break tanks for prime contractors working on Test Valley Borough Council projects. The selected supplier is responsible for manufacturing or sourcing the tanks according to specific project design requirements and delivering them to two designated sites within the Hampshire and Isle of Wight region. The supplier must ensure that all equipment complies with UK water quality and safety standards and provide manufacturer warranties for both units. Interested parties must submit their responses by the deadline of October 23, 2026.

Test Valley Borough Council

POSTED

about 21 hours ago

DEADLINE

Propane Tank & Mounting Hardware SupplyThis subcontract agreement involves the supply of underbody-mounted propane tanks and associated mounting hardware for prime contractors working on bus projects for the Region of Peel. The scope of work includes providing certified tanks that meet specific ground clearance requirements, along with necessary brackets, fasteners, and exhaust heat shielding. All delivered equipment must strictly adhere to safety and industry standards, including CSA B149.5:25, CSA B51, and the TSSA Propane Code Adoption Document. The solicitation was posted on October 6, 2026, with a response deadline of October 22, 2026.

POSTED

about 21 hours ago

DEADLINE

Manufacturing of Vehicular Structural Frame (NSN 2510012035667)This subcontract involves the manufacture and supply of one vehicular structural frame, identified by NSN 2510012035667, for prime contractors supporting the DLA Weapons Support Land Supply Chain under the Department of Defense. The fabrication process must strictly adhere to Technical Data Package Rev A Gen 1 and specific reference drawings 19207 7979101 through 1970 7997170, utilizing industrial cutting, bending, and welding equipment. The project falls under NAICS code 332312 and mandates strict compliance with NIST SP 800-171 cybersecurity standards. Interested parties must respond by October 19, 2026, to provide the completed structural frame as specified in the technical requirements.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Manufacturing of Access Covers (NSN 5340014610652)This subcontract involves the manufacture and supply of 20 access covers under NSN 5340014610652 for the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating the parts using precision metal fabrication equipment in strict accordance with Army Drawing NR 18876 11450188 Revision J and Technical Data Package Rev A Gen 1. All components must meet established DLA quality standards for weapons support to ensure operational compliance. The completed access covers are to be delivered to DLA Dist San Joaquin, with the place of performance located in Tracy, California. This project falls under NAICS code 332312 and is managed by the Department of Defense. The solicitation was posted on October 6, 2026, with a response deadline of October 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Supply of Angle Brackets (NSN 5340014977344)This subcontract involves the fabrication and supply of 73 angle brackets, identified by NSN 5340014977344, for prime contractors supporting the DLA Weapons Support Land Supply Chain under the Department of Defense. The project falls under NAICS code 332312 and requires the delivery of the completed units to DLA Distribution Anniston in Alabama. The contractor must adhere to strict technical specifications, including packaging according to ASTM D3951 or TQ IP025, labeling per MIL-STD-129, and palletization per RP001. Additionally, the provider is required to comply with the Hazard Communication Standard 29 CFR 1910.1200 where applicable to ensure safety and regulatory compliance during the production and delivery process.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

29--FIELD ASSEMBLY,FUEL

Solicitation # SPE4A527T0137

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

59--CHASSIS,ELECTRICAL-

Solicitation # SPE4A727T0223

Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

NSN 1680014262704; COVER,SPINNER ASSY; WSDC CXN

Solicitation # SPE4A527R0008

DLA Aviation is seeking a firm fixed price contract for 30 units of Spinner Assembly Covers, identified by NSN 1680014262704. The procurement is open to approved sources Axillon Aerospace and Bell Textron Inc, utilizing part numbers 321-52327-105 and 901-011-438-105. Shipping terms are established as FOB Origin and I/A Destination, with the place of performance located in Richmond, Virginia. The solicitation, numbered SPE4A527R0008, is expected to be published around October 30, 2026, with a closing date of November 30, 2026. Award decisions will be based on a combination of price, past performance, and other evaluation factors. All solicitation documents are available exclusively in PDF format via the DLA Internet Bid Board System.

Other Support Activities for Air Transportation

POSTED

about 3 hours ago

DEADLINE

28--SUPPORT,COMPRESSOR

Solicitation # SPE4A627T0663

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

16--DAMPER TUBE ASSEMBLY

Solicitation # SPE4A727Q0033

Aircraft Manufacturing

POSTED

about 3 hours ago

DEADLINE

16--FILTER BODY,FLUID

Solicitation # SPE4A727T0222

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Rigging and Installation ServicesThis subcontract for Rigging and Installation Services involves the transport and placement of industrial booths for prime contractors supporting DLA Aviation projects at FRCE Cherry Point. The scope of work encompasses the rigging, transporting, installation, and foundation work required to position and anchor booths at their final destinations, as well as the removal of existing equipment. Due to the nature of the project, the contractor must possess specialized experience with heavy industrial machinery rigging. Interested parties should note that the response deadline is October 22, 2026, and the work falls under NAICS code 484220.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Specialized Safety Equipment SupplyThis subcontract for Specialized Safety Equipment Supply supports prime contractors on DLA Aviation projects at FRCE in Cherry Point. The scope of work involves the delivery of critical safety and operational hardware, specifically focusing on GVS/RPD Respirator NV3-703-50 units, which are mandatory safety requirements, along with 5 inch Central Vacuum Orbital Sanders operating at 12,000 RPM and compressed air manifold kits equipped with hose reels. Managed under NAICS code 423830 for the Department of Defense, the contract ensures the provision of essential respirators, sanders, and pneumatic fittings. The solicitation was posted on October 6, 2026, with a response deadline set for October 22, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Fire Suppression System InstallationThis subcontract involves the installation of fire protection systems for prime contractors supporting DLA Aviation projects at FRCE in Cherry Point. The primary scope of work is the delivery and installation of a certified dry pipe sprinkler system that is fully integrated into the booth structure. To ensure safety and compliance, the system must be specifically compatible with the booth's explosion-proof rating and designed to operate effectively within a combustible dust environment. Interested parties should note the response deadline of October 22, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Industrial Control Systems Integration (PLC)This subcontract for Industrial Control Systems Integration supports prime contractors on DLA Aviation projects at FRCE in Cherry Point. The scope of work involves supplying and programming control logic and user interfaces, specifically requiring the installation of a UL-listed control enclosure along with the programming of Allen Bradley PLC and HMI touch screen interfaces. All hardware must be mandatory Allen Bradley from Rockwell Automation and maintain a Class 2 Division 1 rating. The final deliverable consists of a fully programmed PLC and HMI interface. The solicitation was posted on October 6, 2026, with a response deadline of October 22, 2026, under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Explosion-Proof Ventilation & Dust Collection SystemThis subcontract involves the supply and installation of explosion-proof ventilation and dust collection systems for prime contractors supporting DLA Aviation projects at FRCE in Cherry Point. The scope of work includes the installation of conditioned make-up air systems, vacuum media removal, and cross-draft ventilation maintaining a minimum face velocity of 100 fpm. The contractor is responsible for performing all necessary building wall penetrations and flashing to ensure a fully operational system. Strict safety and technical standards apply, requiring all ducting to conform to NFPA 68, 69, and 91 regulations. Specifically, systems must maintain Class 2 Division 1 ratings within three feet of all openings. This project falls under NAICS code 238220 and requires a response by October 22, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Sextant, Marine; [WSDC: 23N] End Item: Ship, Ohio Class SSN (Trident) PR: 7017536460 NSN: 6605-012533442

Solicitation # SPE4A6-27-R-0030

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS