Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Industrial Coating and Finishing for Mounting Brackets

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing industrial coating and finishing services for mounting brackets to support the DLA Weapons Support Land Supply Chain. The selected contractor will be responsible for applying protective coatings or finishes in accordance with Army drawings, utilizing chemical treatment baths, powder coating lines, or industrial plating tanks. All finished brackets must be delivered ready for final inspection, and the use of Class I ozone-depleting chemicals is strictly prohibited. The project is managed under the Department of Defense and will be performed at Fort Riley. Interested parties should note that the response deadline is October 26, 2026. The work falls under NAICS code 332813, focusing on specialized surface treatment and plating for prime contractors.

General Info

Industrial coating and finishing for DLA mounting brackets at Fort Riley by 10/26/2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

FT RILEY, KS, 66442-0000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-1584.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BRACKET, MOUNTING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface treatment, plating, or coating for prime contractors on DLA Weapons Support Land Supply Chain projects. Applies protective coatings or finishes to mounting brackets per Army drawings using industrial plating tanks, powder coating lines, or chemical treatment baths. Prohibits use of Class I ozone-depleting chemicals. Delivers coated and finished brackets ready for final inspection.

Similar Contracts

Same NAICS industry code

NADCAP Special Process Treatment

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Aerospace Finishing and Coating for Access CoversThis subcontract involves providing specialized surface treatment and coating services for aerospace access covers supporting the DLA Weapons Support Land Supply Chain. The selected contractor is responsible for applying finishes in strict accordance with Drawing NR 76823 STF0394 and QAP 16236, with a mandatory requirement that no Class I Ozone Depleting Chemicals are utilized during the process. Performance will take place in Jacksonville, Florida. To be eligible, contractors must hold ISO 9001:2015 or AS9100 certification and possess the necessary authorization to handle parts controlled under ITAR and EAR regulations. The primary objective is the delivery of finished, coated aerospace components that meet all specified Department of Defense quality and environmental standards.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Cadmium Plating and Chromate Finishing ServicesThis subcontract involves providing cadmium plating and chromate finishing services for 363 steel pins to support prime contractors on DLA Weapons Support ASC projects. The work will be performed at Robins Air Force Base and requires the application of finishes using industrial plating tanks while strictly adhering to hexavalent chromium prohibitions. All finished pins must be verified for thickness and adhesion according to NASM/MIL standards and delivered with certified plating. The contractor must ensure full compliance with 29 CFR 1910.1200 regarding the handling of hazardous materials. This opportunity is managed by the Department of Defense under NAICS code 332813, with a response deadline of October 22, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

CRES Passivation ServicesThis subcontract for CRES Passivation Services supports the DLA Weapons Support Land Supply Chain under the Department of Defense. The scope of work involves performing chemical passivation for prime contractors to ensure corrosion resistance on helical compression springs. This process utilizes specialized chemical passivation baths and rinsing systems to effectively remove surface contaminants before the final delivery of the passivated components. The project falls under NAICS code 332813 and was posted on October 14, 2026, with a response deadline of October 26, 2026. Interested parties can find further details through the provided DIBBS solicitation link.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Phosphate Coating and Surface FinishingThis subcontract involves providing phosphate coating and surface finishing services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected contractor will utilize industrial plating tanks to apply phosphate coatings to rod components in strict accordance with the technical data package to ensure corrosion prevention and adherence to military specifications. Performance of these services will take place in New Cumberland. To be eligible for this requirement, the contractor must obtain approval from the PCO as the designated Phosphate Contractor and maintain CMMC Level 2 certification. The project falls under NAICS code 332813 and is managed by the Department of Defense. Interested parties must submit their responses by October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Finishing and Coating for Support AssemblyThis subcontract opportunity is for the application of military-grade surface treatments and coatings for Support Assembly components under the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work includes performing anodizing, phosphating, or painting in strict accordance with technical data package specifications to ensure necessary corrosion resistance. Performance will take place in Tracy, California, under NAICS code 332813. The contract is designated as a Total Small Business Set-Aside. To be eligible, contractors must maintain CMMC Level 2 certification for access to technical drawings and ensure full compliance with 29 CFR 1910.1200(g) regarding the handling of hazardous materials. The response deadline for this requirement is October 26, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Aerospace Component Finishing and CoatingThe Aerospace Component Finishing and Coating subcontract is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. This small business set-aside project requires the application of protective coatings and surface treatments for Ramp Assembly components. All work must be performed in strict accordance with 01365 series drawings and DLA Master List quality standards to ensure finished metal components meet rigorous military specifications. Contractors are responsible for maintaining full compliance with 29 CFR 1910.1200 regarding the labeling of hazardous materials. The solicitation was posted on October 14, 2026, with a response deadline of October 22, 2026. This effort falls under NAICS code 332813 and is designated as a Total Small Business Set-Aside per FAR 19.5.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Special Process FinishingThe Aerospace Special Process Finishing subcontract involves providing plating, heat treating, and coating services for prime contractors supporting DLA Weapons Support ASC aircraft projects. The selected provider will be responsible for delivering finished structural components in strict accordance with Drawing 20145214 and TDP specifications. A critical requirement of this contract is full compliance with DFARS 252.223-7008, which prohibits the use of hexavalent chromium. All special processes performed under this agreement must hold NADCAP approval to ensure industry-standard quality and safety. The work is associated with NAICS code 332813 and will be performed at Tinker AFB. Interested parties must adhere to the response deadline of October 22, 2026, to be considered for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Heat Treatment and Surface Finishing for Critical GearshaftsThis subcontract involves providing specialized heat treatment and surface finishing services for critical gearshafts supporting DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work includes executing case hardening, induction hardening, tempering, and precision surface grinding to ensure components are ready for final inspection. All operations must strictly adhere to the DLA Master List of Technical and Quality Requirements, specifically prohibiting the use of hexavalent chromium in any process. The project is categorized under NAICS code 332813 and will be performed in Tracy, California. Interested parties should note the response deadline of October 26, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Phosphate Coating Services for Second Stage RAMThis subcontract involves providing specialized phosphate coating services for second stage RAM components to support prime contractors under the DLA Weapons Support Maritime Supply Chain. The selected provider must ensure all work is performed in strict accordance with RQ036 Phosphate Coating Supplier Certification Requirements and the DLA Master List of Technical and Quality Requirements, with a specific mandate that no ozone-depleting chemicals are utilized during the process. The project is managed by the Department of Defense and will be performed in Tracy, California. Interested parties should note the solicitation posted on October 14, 2026, with a response deadline of October 26, 2026. The contract falls under NAICS code 332813 and requires the delivery of coated components that fully meet all specified RQ036 standards.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Specialized Coating for Bomb Rack Gas ChambersThis subcontract involves providing and applying specialized protective functional coatings for bomb rack gas chambers supporting the DLA Weapons Support Land Supply Chain. The scope of work includes the coating of assembled gas chamber units and the delivery of one specific coated exhibit for First Article Testing. Performance will take place in Tracy, California, under NAICS code 332813. To be eligible, contractors must maintain DDTC registration and hold certification in either SAE AS9003 or ISO 9001. Additionally, all work and materials must strictly adhere to the Buy American Act and Berry Amendment requirements. Responses for this opportunity are due by October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Metal Finishing and CoatingThis subcontract for Aerospace Metal Finishing and Coating involves providing surface treatments and coatings for aircraft structural brackets on behalf of prime contractors for the DLA Weapons Support ASC. The scope of work includes performing surface preparation and finishing in strict accordance with technical drawings and the DLA Master List of Technical and Quality Requirements to ensure effective corrosion prevention. The project is managed by the Department of Defense and will be performed at Tinker AFB. To be eligible, contractors must maintain ITAR compliance and hold quality system certifications such as ISO 9001 or SAE AS9003. The final deliverable consists of finished and coated aircraft brackets meeting all specified aerospace standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Alloy Steel/Specialty Metal Supply for Gearshafts

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 3 hours ago

DEADLINE

Spur Gearshaft Fabrication (NSN 3040004116828)

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

MIL-STD Packaging and Freight

Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

CARC Coating Application

POSTED

about 3 hours ago

DEADLINE

Vehicle Boarding Ladder Fabrication

Fabricated Structural Metal Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7L1-27-U-0083

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-1587

Solicitation SPE7L1-27-T-1587, issued by the DLA Weapons Support Land Supply Chain, is for the procurement of 33 units of knobs under NSN 5355-00-882-1246. The delivery is required within 168 days of award, with a need ship date of April 13, 2027, and a final required delivery date of July 10, 2027. Performance and delivery are set for DLA Distribution Jacksonville, Florida, with FOB terms specified as Origin. Quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by October 26, 2026. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking and labeling, and RP001 for palletization. All supplied items must be free of asbestos and class I ozone-depleting chemicals. Inspection and acceptance will occur at the destination, following FAR 52.246-2 and specific sampling methods such as MIL-STD-1916. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. A price evaluation preference is available for SBA-certified HUBZone small business concerns. Offerors must also certify their size status via the assigned NAICS code 327999 and represent their compliance regarding covered defense telecommunications equipment.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-1596

Solicitation SPE7L1-27-T-1596 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one O-ring, identified by NSN 5331000011971. The requirement specifies a delivery timeframe of 20 days after receipt of order, with an original required delivery date of August 22, 2025. Delivery is set as FOB Destination to a shipping address in Ali Al Salem, Kuwait. The contract mandates strict material compliance, prohibiting the use of class I ozone depleting chemicals, mercury or mercury-containing compounds, and asbestos. Technical and quality requirements are governed by the DLA Master List, including specific mandates for supply chain traceability documentation and source approval request documentation. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 assessment requirements for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

MODULATOR, TRANSMISSION

Solicitation # SPE7L1-27-T-1590

Solicitation SPE7L1-27-T-1590 is a request for quotations from the DLA Weapons Support Land Supply Chain for the procurement of 84 units of Transmission Modulators, identified by NSN 2520-01-244-9863. The items are source-controlled, meaning they must meet the requirements of the cited drawing and may only be furnished by approved sources. Delivery is required to the River Receiving building in Texarkana, Texas, with a specified delivery window of 60 days and a need ship date of April 13, 2027. Inspection and acceptance will occur at the point of origin. The contract imposes strict quality and technical standards, requiring manufacturers to maintain calibration systems meeting ANSI/NCSL Z540-1-1994 or ISO 10012-1 and an inspection system complying with ISO 9001:2015. Sampling must follow MIL-STD-1916 or ASQ H1331, and first article testing of three units is required with a 14-day advance notice to the contracting officer. Additionally, the contractor must comply with environmental restrictions prohibiting Class I ozone-depleting chemicals and the intentional addition of mercury. Security and regulatory compliance are critical, as the technical data is subject to ITAR or EAR export controls. The awardee must be CMMC Level 2 certified and adhere to DFARS 252.204-7012 for safeguarding covered defense information. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American Act and Berry Amendment. The solicitation is categorized under NAICS code 336350.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

GEARSHAFT, SPUR

Solicitation # SPE7L1-27-T-1602

Solicitation SPE7L1-27-T-1602 is a fixed-price procurement issued by the DLA Weapons Support Land Supply Chain for the supply of 39 spur gearshafts (NSN 3040-01-095-1024). The contract requires delivery within 175 days after receipt of the order, with the place of performance and delivery located at DLA Distribution DDSP New Cumberland. The procurement includes a requirement for one first article test unit, for which the contractor must provide written notice to the Contracting Officer and Quality Assurance Representative at least 14 calendar days prior to shipment. Inspection and acceptance will occur at the point of origin, and manufacturers must maintain an inspection system compliant with ISO 9001:2015 or an equivalent standard. The contract is subject to stringent technical and security requirements, including export controls under ITAR and EAR, and cybersecurity compliance via CMMC Level 2 and DFARS 252.204-7012. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system. Additionally, the solicitation incorporates the Buy American Act and Berry Amendment for domestic sourcing and provides a price evaluation preference for certified HUBZone small businesses. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-1588

Solicitation SPE7L1-27-T-1588 is a request for quotations from the DLA Weapons Support Land Supply Chain for the procurement of four access covers, identified by NSN 5340-01-021-5598. The items must be manufactured using a metal casting process in accordance with Technical Data Package Rev C Gen 3 and Reference Drawing NR 81205. Delivery is required by July 14, 2027, with a need ship date of April 13, 2027, shipping FOB Destination to the DLA Distribution Depot at Tinker AFB, Oklahoma. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and inspection and acceptance will occur at the origin. This procurement is subject to strict regulatory and security requirements, including ITAR and EAR export controls, and requires a Boeing Rights Guard License Agreement for data non-disclosure. Contractors must be CMMC Level 2 certified and comply with DFARS 252.204-7012 for safeguarding covered defense information. Packaging must adhere to ASTM D3951 and FED-STD-313, while marking and labeling must follow MIL-STD-129, specifically excluding the original Boeing CAGE code. The solicitation is open to full and open competition, with a price evaluation preference available for SBA-certified HUBZone small businesses. Invoicing and payment must be processed through the Wide Area WorkFlow system.

Aircraft Manufacturing

POSTED

about 3 hours ago

DEADLINE

CONNECTING LINK, RIG

Solicitation # SPE7L1-27-T-1600

Solicitation SPE7L1-27-T-1600 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 13 rigid connecting links. The items are identified by NSN 3040016803886 and part number 396D765-17 from East/West Industries, Inc. These components are designated as critical application items and have no shelf life requirement. The required delivery date is January 28, 2027, with a need ship date of October 6, 2026, and a delivery window of 123 days after order. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically RA001, RQ011, and RP001. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001. Prohibitions are in place against the use of Class I ozone-depleting chemicals. Administratively, the contract requires the use of the Wide Area WorkFlow system for electronic invoicing and payment. It incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. Quotes must be submitted via the DIBBS portal under NAICS code 333613.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS