Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Industrial Coating and Finishing for Mounting Brackets

Active

Federal

Response Deadline11/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Industrial Coating and Finishing for Mounting Brackets supports the DLA Weapons Support Land Supply Chain. The selected contractor is responsible for applying protective coatings and finishes to brackets, specifically performing surface preparation and plating in accordance with the technical data package for NSN 5340-01-694-9027. All work must be performed in compliance with the 29 CFR 1910.1200 Hazard Communication Standard, and Safety Data Sheets must be provided per Federal Standard No. 313. The project falls under NAICS code 332813 and will be performed in Green Bay. Interested parties must respond by November 16, 2026. The primary objective is the delivery of finished and coated brackets that meet all specified Department of Defense technical and safety requirements.

General Info

Subcontract for industrial coating and finishing of mounting brackets in Green Bay, Wisconsin.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

GREEN BAY, WI, 54304-5735, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-3419.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BRACKET, MOUNTING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Applies protective coatings and finishes for prime contractors on DLA Weapons Support Land Supply Chain projects. Performs surface preparation and plating per the technical data package for NSN 5340-01-694-9027. Ensures compliance with 29 CFR 1910.1200 Hazard Communication Standard and provides Safety Data Sheets per Federal Standard No. 313. Delivers finished and coated brackets.

Similar Contracts

Same NAICS industry code

Phosphate Coating Services for Traverse Mechanism HousingThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, seeks a qualified provider to perform specialized phosphate coating for traverse mechanism housings. The project involves applying a Manganese coating to finished metal housings using industrial coating tanks and chemical processing equipment to support critical gun part projects. To be eligible, the contractor must be an approved RQ036 Phosphate Coating Supplier and ensure all deliverables are ready for final inspection. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813. Interested parties must submit their responses by November 16, 2026. This contract focuses on precise chemical processing requirements to meet strict military specifications for prime contractors.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

NADCAP-Approved Special Process ServicesThis subcontract opportunity is for the provision of NADCAP-approved special process services to support prime contractors delivering DLA supply contracts. The scope of work involves executing specialized aerospace processes, specifically Non-Destructive Testing and chemical processing, in strict accordance with requirement RQ040 and Drawing 20145214. All processed components must be delivered with the necessary certifications of conformance to ensure quality and compliance. The contract is a total small business set-aside under NAICS code 332813, managed by the Department of Defense DLA Weapons Support ASC. Performance will take place at Tinker AFB. To be eligible, providers must maintain NADCAP approval for the specified processes and adhere to CMMC Level 2 standards for the secure handling of technical data. Responses are due by November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves applying specialized surface coatings to radome shells for the DLA Weapons Support ASC. The contractor is responsible for surface preparation and finishing in accordance with Drawing 26512 C1001B9000, with a strict requirement to prohibit the use of hexavalent chromium per DFARS 252.223-7008. The project demands a controlled environment facility and full compliance with ITAR and EAR regulations. This opportunity is managed by the Department of Defense under NAICS code 332813, with a response deadline of December 3, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

NADCAP Approved Special Process ServicesThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div, requires the performance of NADCAP-approved special processes for aircraft components. The scope of work includes chemical processing, heat treating, or coating as specifically detailed in Drawing 20145214. To be eligible, the contractor must maintain current NADCAP approval for the specific process being executed and provide certifications of conformity upon delivery of the processed components. The work is to be performed at Tinker AFB, zip code 73145-8000, under NAICS code 332813. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Aerospace Surface Treatment and Finishing for Mount AssembliesThis subcontract opportunity involves providing specialized surface treatments and coatings for mount assemblies supporting DLA Weapons Support ASC projects. The selected contractor will be responsible for applying aerospace-grade finishes in strict accordance with the provided technical data package and the DLA Master List of Technical and Quality Requirements. To ensure quality standards are met, the contractor must maintain ISO 9001:2015 certification. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in New Cumberland. Interested parties must submit their responses by November 12, 2026. The scope of work concludes with the delivery of finished, coated aerospace components under NAICS code 332813.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Specialized Chemical Coating and FinishingThis subcontract for Specialized Chemical Coating and Finishing supports the DLA Weapons Support Land Supply Chain by providing chemical conversion coating and precise color-matching services. The scope of work involves applying chromate conversion coatings in accordance with AMS-QQ-A-225/6 and ensuring color matching meets AMS-STD-595 standards through the use of colorimetry tools and chemical baths. All finished parts must be delivered with certified documentation confirming coating and color compliance. Performance will take place at Hill AFB, and the contractor must adhere to strict regulatory requirements, including ITAR/EAR compliance and DFARS 252.204-7012 cybersecurity standards. The opportunity is categorized under NAICS code 332813, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Gear Hardening and Surface TreatmentThis small business set-aside subcontract, issued by the Department of Defense for DLA Weapons Support Land Supplier Opns Vehicle Spt, involves the heat treatment and surface finishing of gearshafts. The selected contractor will be responsible for executing case hardening, induction hardening, or nitriding, followed by surface grinding to ensure all components meet NSN 3040-00-877-3619 specifications. To qualify, the provider must possess industrial heat-treat furnaces and maintain ISO 9001 quality management certification. All work must be performed using mercury-free processing. The solicitation was posted on November 4, 2026, with a response deadline of November 19, 2026, under NAICS code 332813.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

Aerospace Finishing and Painting ServicesThe Aerospace Finishing and Painting Services subcontract involves providing final finishing and painting for prime contractors working on Air Force aircraft component projects. The scope of work includes surface preparation, the application of aerospace-grade primers and paints, and the placement of technical decals. All deliverables must be finished, painted, and marked in strict compliance with MIL-STD-129 and MIL-STD-2073-1 standards for marking and packaging. This opportunity is issued by the Department of Defense under agency FA8118 Afsc Pzabb and is categorized under NAICS code 332813. The place of performance is located in zip code 73145. The solicitation was posted on November 4, 2026, with a response deadline set for December 4, 2026.

FA8118 Afsc Pzabb

POSTED

about 22 hours ago

DEADLINE

Specialized Plating and Coating ServicesThis subcontract for Specialized Plating and Coating Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves performing surface treatments and plating on fabricated bolts using industrial plating tanks and chemical treatment facilities. All work must be executed in strict accordance with QQ-P-416 and specific technical drawings to guarantee necessary corrosion protection and durability before final inspection. The opportunity is categorized under NAICS code 332813 and was posted on November 4, 2026. Interested parties must submit their responses by the deadline of December 4, 2026, at 8:30 PM.

Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

Marine-Grade Industrial FinishingThe Marine-Grade Industrial Finishing subcontract involves providing specialized finishing and coating services for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The primary scope of work focuses on applying specific surface treatments to marine structural doors in strict accordance with Note 47 of Drawing 803-2226372 to ensure all finished surfaces meet rigorous naval corrosion resistance standards. A critical environmental requirement of this contract is the absolute prohibition of Class I ozone-depleting chemicals during the coating process. This opportunity falls under NAICS code 332813 and was posted on November 4, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating supports NAVSUP Weapon Systems Support projects by providing specialized surface treatments, coatings, and finishes for fan components. The selected contractor will apply aerospace-grade finishes, plating, and anti-corrosion coatings using industrial equipment that adheres to strict aerospace standards. To ensure quality and compliance, the provider must hold ISO 9001 or SAE AS9100 certification. Deliverables include the finished components accompanied by comprehensive process certification records and detailed pass/fail inspection data based on applicable technical publications. This opportunity falls under NAICS code 332813 and is managed under the Department of Defense. Interested parties must submit their responses by December 4, 2026.

Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

Aerospace Component Surface Treatment and FinishingThis subcontract, titled Aerospace Component Surface Treatment and Finishing, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project requires the application of specialized surface treatments, plating, and coatings for cylinder components intended for prime contractors on DLA supply contracts. Specifically, the contractor must provide finishes such as chemical filming, cadmium plating, or anodizing in strict accordance with drawing 78286 70651-2110 Revision C. To ensure quality and compliance, the provider must utilize industrial plating baths and chemical treatment tanks that maintain NADCAP accreditation. This opportunity is designated as a Total Small Business Set Aside under NAICS code 332813. The solicitation was posted on November 4, 2026, with a response deadline of November 18, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Supply of Vehicular Component Bracket (NSN 2590016031932)This subcontract involves the sourcing and manufacture of a single vehicular component bracket conforming to NSN 2590016031932 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Delivery of the physical bracket is required within five days of the contract award. Strict adherence to technical and quality standards is mandatory, including packaging per ASTM D3951 and the DLA Master List of Technical and Quality Requirements. Additionally, all items must be marked and palletized in accordance with MIL-STD-129 and RP001 DLA. The opportunity is categorized under NAICS code 332510.

Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

Manufacturing of Access Covers (NSN 5340-01-237-3027)This subcontract involves the manufacture and supply of four precision-engineered access covers under NSN 5340-01-237-3027 for the Department of Defense, specifically supporting DLA Weapons Support Land Supply Chain contracts. The project requires a provider with specialized precision machining and forming capabilities to fabricate the covers in strict accordance with Drawing 98752 60244-40578 (Rev C/A) and Drawing 98752 60244-40577 (Rev C) per TDP Rev A Gen 4. The work is categorized under NAICS code 332722 and will be performed at Tinker AFB. Interested parties must respond by November 16, 2026, to fulfill the requirements for these critical components.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

Manufacturing of Access Cover (NSN 5340-01-587-8441)This subcontract involves the manufacture and supply of one Access Cover, identified by NSN 5340-01-587-8441, for prime contractors supporting DLA supply contracts. The selected provider will utilize precision machining and fabrication equipment to produce the part according to exact specifications sourced from the DLA technical data portal. All deliverables must be labeled and marked in compliance with MIL-STD 129 and delivered FOB Destination. The project is managed under the Department of Defense through the DLA Weapons Support Land Supply Chain, with performance taking place in Albany. The contract falls under NAICS code 332994. Interested parties must adhere to the response deadline of November 16, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Threaded Spacing Standoffs

Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

Nonmetallic Hose Assembly Supplier (NSN 4720012960402)This subcontract involves the supply of three nonmetallic hose assemblies for the DLA Weapons Support Land Supply Chain. Each assembly must feature a 3-inch inner diameter and a length of 25 feet, equipped with male NPT brass couplings. The supplier is required to ensure all materials are free of Class I ozone-depleting chemicals and strictly adhere to ASTM D3951, MIL-STD-129 packaging and marking standards, and RQ017 bare item marking requirements. The completed order is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. This procurement falls under NAICS code 326220 and is associated with NSN 4720012960402. Interested parties must respond by November 16, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Magnetic Catches (NSN 5340-01-345-6785)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the sourcing or manufacture of one magnetic catch identified by NSN 5340-01-345-6785. The hardware is intended for prime contractors fulfilling DLA supply contracts and must be delivered via FOB Origin to Blacklick, Ohio. The contract strictly prohibits the use of additive manufacturing processes during production. Additionally, the supplier must ensure that all items adhere to the PKGING DATA-QUP:001 packaging standards. The solicitation was posted on November 4, 2026, with a response deadline of November 16, 2026, falling under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 17 hours ago

DEADLINE

Loop Clamp Supplier (NSN 5340-00-197-1750)This subcontract involves the manufacture or procurement of 93 Loop Clamps, identified by NSN 5340-00-197-1750, to support prime contractors for the DLA Weapons Support Land Supply Chain. All units must be produced in accordance with the DLA Master List of Technical and Quality Requirements and must include a Certificate of Conformance per FAR 52.246-15. The contractor is responsible for ensuring all items are marked according to MIL-STD-130N and MIL-STD-129, with packaging adhering to RP001 and MIL-STD-2073-1E standards. The final delivery of the 93 packaged units is designated as FOB Origin, with the place of performance located in New Cumberland.

Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Loop Clamps (NSN 5340015359984)This subcontract involves the supply of eight loop clamps for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for manufacturing or sourcing hardware that strictly adheres to NSN 5340015359984 specifications. All items must be packaged according to government standards, with hazardous materials specifically requiring compliance with FED-STD-313 and TQ requirement IP025. The agreement mandates strict adherence to DFARS 252.204-7016 and 7017 regulations concerning the use of telecommunications equipment. This procurement falls under NAICS code 332722 and is managed by the Department of Defense. The response deadline for this requirement is November 16, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

Manufacture and Supply of Critical Application Seals (NSN 5330011197131)This subcontract involves the manufacture and supply of critical application seals under NSN 5330011197131 for the DLA Weapons Support Land Supply Chain. The contractor is responsible for producing 561 rolls of seals, each with a continuous length of 109 inches, to be delivered to Hill AFB. To ensure quality and compliance, the provider must perform First Article Testing and submit a corresponding validation report. The seals must be packaged in medium-duty waterproof, greaseproof, and opaque bags to maintain integrity. Additionally, the contractor is tasked with managing a strict, non-extendable shelf life of 72 months for all supplied items. This effort supports prime contractors delivering essential components to the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

International HAZMAT Freight Forwarder (Japan Destination)This subcontract involves the transport and delivery of hazardous engine primer fuel for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider is responsible for the international freight forwarding of these materials to the Distribution Management Office at Camp Kinser, Japan, which includes managing all necessary international customs coordination. To ensure compliance and safety, the contractor must adhere to MIL-STD-2073-1E and MIL-STD-129 for all packaging and marking. Additionally, the provider must hold valid IATA and IMDG certifications to legally and safely execute the international shipment of hazardous materials.

Freight Transportation Arrangement

POSTED

about 17 hours ago

DEADLINE

Supplier of Engine Primer Fuel (NSN 2910-01-568-0531)This subcontract involves the supply of engine primer fuel for prime contractors supporting DLA Weapons Support Land Supply Chain projects. The contractor is responsible for providing one unit of Deere and Company part number AT171162, identified by NSN 2910-01-568-0531, ensuring full compliance with DLA Master List technical requirements RA001 and RQ011. The delivery must be made to Camp Kinser, Japan, and must include a corresponding Safety Data Sheet. To be eligible for this contract, the supplier must maintain HAZMAT handling certification and adhere to all Buy American Act regulations. The opportunity is categorized under NAICS code 325998 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 16, 2026.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 17 hours ago

DEADLINE

DLA Compliant Packaging and LogisticsThis subcontract for DLA Compliant Packaging and Logistics involves providing specialized packaging services for prime contractors supporting DLA Weapons Support aviation projects. The scope of work requires the packaging of 190 life preserver covers using military-grade moisture barriers, cushioning, and containers to ensure the protection of critical aviation components during shipment. All deliverables must be packaged and labeled in strict accordance with DLA standards and RP001 packaging requirements for procurement. The project is managed under the Department of Defense through the DLA Weapons Support Land Supply Chain, with performance taking place in New Cumberland. The solicitation was posted on November 4, 2026, with a response deadline of November 16, 2026. The contract falls under NAICS code 339999 and focuses on the delivery of 190 fully compliant packaged units.

All Other Miscellaneous Manufacturing

POSTED

about 17 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Cleaning and Impregnation of CLET Heat Exchangers

Solicitation # W911N227DA007

W6QK Lad Contr Office

POSTED

about 22 hours ago

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Chemical Agent Resistant Coating (CARC) Application

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS