This Subcontract opportunity from Department Of Defense was posted on October 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Industrial Coating and Finishing

Closed

Federal

Submission Closed10/19/2026, 01:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332813

New

DIBBS

Aerospace Surface Treatment and Coating for Rotary Wing Blade Fold SetsThis subcontract involves providing specialized aerospace surface treatment and coating services for rotary wing blade fold sets on behalf of the DLA Weapons Support ASC. The scope of work focuses on industrial painting and the application of grey protective coatings specifically for case part numbers AL5824-1119RA and AL5924-1018AC. All work must be performed in strict accordance with the DLA Master List of Technical and Quality Requirements to ensure the integrity of the delivered aerospace components. The project is managed under NAICS code 332813 for the Department of Defense. Interested parties should note that the solicitation was posted on November 13, 2026, with a response deadline set for December 14, 2026. The primary objective is the delivery of high-quality, coated components that meet rigorous military specifications for aerospace hardware.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Oxygen Cleaning for Aerospace ComponentsThis subcontract for Precision Oxygen Cleaning for Aerospace Components involves providing specialized cleaning services for prime contractors supporting DLA Aviation projects. The scope of work focuses on the removal of contaminants from Blower and Duct Assemblies intended for oxygen-rich environments. All operations must be conducted within a certified oxygen-clean facility using specialized solvents and advanced particulate and hydrocarbon detection equipment to ensure safety and performance. The project is governed by the Department of the Navy and performed in Philadelphia, Pennsylvania. Strict adherence to MIL-STD-1330 is required, and the contractor must provide a formal certification of compliance upon delivery of the certified Oxygen Clean assembly. Interested parties should note the response deadline of November 30, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

CARC and High-Temperature Coating ServicesThis subcontract for the DLA Weapons Support Land Supply Chain involves providing specialized chemical agent resistant coatings and high-temperature finishing services for brackets. The contractor is responsible for applying coatings and phosphate finishing in strict accordance with DCSC Drawing 16236 CS-2300-0001 and QAP 16236 SQAPCARCLTPHOS81361 specifications. To ensure compliance and quality, the service provider must utilize CARC-certified spray booths and curing equipment. The project falls under NAICS code 332813 and will be performed in New Cumberland. Interested parties must submit their responses by November 23, 2026. This effort supports prime contractors in delivering finished components that meet rigorous Department of Defense standards for chemical resistance and thermal durability.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating involves providing specialized surface treatments, coatings, and plating for cradle assemblies on DLA Weapons Support ASC aerospace projects. The selected contractor must apply aerospace-grade finishes in strict accordance with technical drawings and DLA Master List specifications to ensure components are ready for final assembly. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, with performance taking place at Robins Air Force Base. Due to the nature of the technical data involved, contractors must maintain ITAR and EAR compliance and adhere to ISO 9001 quality standards. Responses for this opportunity are due by November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves providing specialized surface treatment, plating, and coating services for prime contractors under Defense Logistics Agency supply contracts. The scope of work focuses on applying corrosion-resistant coatings and specialized finishes to bomb rack components utilizing industrial plating tanks and anodizing equipment. All work must strictly adhere to DLA technical and quality requirements, specifically RA001, to ensure the integrity of the aerospace hardware before delivery for final assembly. The opportunity is categorized under NAICS code 332813 and is managed by the Department of Defense through the Defense Logistics Agency. Interested parties should note that the solicitation was posted on November 12, 2026, with a response deadline set for November 23, 2026.

Defense Logistics Agency

POSTED

DEADLINE

NADCAP Certified Phosphate Coating ServicesThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, seeks a provider to perform specialized phosphate coating for mounting brackets. The work must be executed using industrial phosphate plating lines in strict accordance with MIL-STD-171, MIL-DTL-16232, and TT-C-490 standards. A critical requirement for this engagement is that the contractor must hold NADCAP certification from the Performance Review Institute. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 23, 2026. The primary objective is the delivery of coated mounting brackets that meet all specified military standards to support prime contractors delivering on DLA supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Finishing and CoatingThis subcontract for Aerospace Finishing and Coating supports the DLA Weapons Support Land Supply Chain by providing specialized surface treatments and coatings for prime contractors. The scope of work involves applying finishes that strictly adhere to TDP specifications and MIL-STD-1907(4) standards. To ensure environmental compliance, the contractor must operate without Class I Ozone Depleting Chemicals and maintain adherence to aerospace environmental standards. The project is managed under the Department of Defense with performance located in Jacksonville, Florida. Due to the nature of the components, the selected provider is required to maintain active ITAR registration. Interested parties should note the response deadline of November 20, 2026, for this effort categorized under NAICS code 332813.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

NADCAP Certified Phosphate Coating ServicesThis subcontract for NADCAP Certified Phosphate Coating Services supports prime contractors delivering for the DLA Weapons Support Land Supply Chain. The scope of work involves applying phosphate coatings to manual control levers in accordance with MIL-STD-171, MIL-DTL-16232, and TT-C-490 Types I, II, and V, as well as applying Preservative 09 to bare ferrous surfaces. The service provider must maintain PRI/NADCAP certification for phosphate chemical processes to ensure compliance with quality standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332813. Responses to this solicitation are due by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

NADCAP Special Process FinishingThis subcontract, titled NADCAP Special Process Finishing, involves providing specialized surface treatments, heat treating, or non-destructive testing for valve housing components. The work supports prime contractors for the Department of Defense under the DLA Weapons Support ASC Commodities Division, with performance taking place at Tinker AFB. Contractors must execute all processes according to BAC/BSS standards and provide certifications of conformance. Essential requirements for eligibility include active NADCAP approval for the specific process being performed, as well as strict adherence to ITAR and EAR compliance regulations.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Surface Treatment and FinishingThis subcontract for Surface Treatment and Finishing involves providing protective coating and finishing services for prime contractors on DLA supply contracts. The scope of work includes sandblasting, priming, painting, and anodizing metal pole assemblies to prevent corrosion, utilizing industrial spray booths and curing ovens to deliver finished products. The project is managed under the Department of Defense and will be performed at Robins Air Force Base. Contractors must ensure strict compliance with FAR 52.223-7 regarding restrictions on the intentional addition of mercury. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Chemical Agent Resistant Coating (CARC) ApplicationThis subcontract involves the application of specialized Chemical Agent Resistant Coatings (CARC) for prime contractors supporting DLA supply contracts. The scope of work requires the application of coatings in Forest Green, Olive Drab, or Black in strict accordance with DCSC Drawing 16236 CS-2300-0001. A critical requirement of the performance is the total exclusion of hexavalent chromium and Class I ozone-depleting chemicals during the process to ensure environmental and safety compliance. Managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, the project focuses on delivering brackets with a certified CARC finish. The work is to be performed in Tracy, California, under NAICS code 332813. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves providing specialized surface treatments, painting, or plating for prime contractors supporting the DLA Weapons Support ASC. The scope of work specifically requires the application of aerospace-grade coatings to aircraft access doors, part number 60716-014, in strict accordance with technical specifications and FED-STD-313. To qualify for this project, contractors must hold NADCAP accreditation and possess the necessary certifications for handling hazardous materials. The performance of the contract will take place in Tracy, California, under NAICS code 332813. Interested parties must respond by November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

This subcontract for Industrial Coating and Finishing involves providing surface treatment and industrial coating services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work specifically requires the application of protective finishes to utility access doors, identified by NSN 5340-01-661-6104, ensuring all work adheres to the Technical Data Package and reference drawings. A critical compliance requirement is the guarantee of zero mercury content in all coatings used before the finished components are delivered to the prime fabricator. The project falls under NAICS code 332813 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the posted date of October 7, 2026, with a response deadline set for October 19, 2026.

General Info

Industrial coating services for DLA utility access doors in New Cumberland, Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-0704.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DOOR, ACCESS, UTILITY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 7

subcontract

Response DeadlineOct 19

Deadline has passed

Submission Closed

10/19/2026, 01:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Performs surface treatment and industrial coating for prime contractors delivering DLA Weapons Support Land Supply Chain hardware. Applies protective finishes to utility access doors (NSN 5340-01-661-6104) in accordance with the Technical Data Package (TDP) and reference drawings. Ensures zero mercury content in coatings. Delivers finished components to the prime fabricator.