This Solicitation opportunity from Department Of Energy was posted on May 30, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

INDUSTRIAL HYGIENE ANALYSIS FOR SAMPLES CONTAMINATED WITH RADIOLOGICAL MATERIALS

Closed

4-B185-Q-00507-00Federal

Submission Closed05/31/2024, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

DIBBS

Product Verification Testing and Source Inspection for Critical LightingThis subcontract involves providing product verification testing and source inspection services for critical lighting items under the DLA Weapons Support Nuclear Reactor Program. The selected contractor will be responsible for conducting inspections and tests using sampling methods per MIL-STD-1916 or ASQ H1331, while ensuring that identification markings comply with MIL-STD-130N. Specialized equipment capable of verifying MIL-DTL-16377/8C and MIL-DTL-16377K SUP 1 is required to complete these tasks, with the final deliverables consisting of detailed inspection reports and test results. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to support the Department of Defense in maintaining the quality and compliance of critical components for nuclear reactor program projects.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Production Lot Testing (PLT) and Validation Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Production Lot Test (PLT) Services

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Non-Destructive Testing (NDT) Services

POSTED

DEADLINE

Non-Destructive Testing (NDT) & Specialized Inspection

POSTED

DEADLINE

Independent Testing & CommissioningThis subcontract for Independent Testing and Commissioning supports prime contractors on Department of the Air Force 36 CONS projects. The scope of work involves performing third-party quality assurance, independent testing, and final system commissioning to ensure all installed systems meet required standards. These activities are governed by a formal quality management plan and include conducting milestone inspections and providing final commissioning sign-off. The contractor is responsible for delivering comprehensive testing reports and inspection certifications to the Department of Defense. Classified under NAICS code 541380, the project focuses on rigorous verification and validation processes to ensure operational readiness and system integrity for the agency.

POSTED

DEADLINE

Electromagnetic Compatibility (EMI) Testing for Naval Systems

POSTED

DEADLINE

Environmental Qualification Testing (EQT) for Naval Shipboard Equipment

POSTED

DEADLINE

Fuel System Integrity Testing & CalibrationThis subcontract, titled Fuel System Integrity Testing and Calibration, involves providing specialized technical services for US Coast Guard fuel system projects at Station Sand Key in Clearwater Beach. The scope of work includes performing line leak detection, conducting integrity tests on transition sumps and Under Dispenser Containment, and calibrating clock gauges with 90 percent high-level warning alarms. The selected provider is responsible for delivering all calibrated gauges and certified test reports to the prime contractors. Managed under the Department of Homeland Security for Base Miami Beach, this opportunity is designated as a total Small Business Set Aside under NAICS code 541380. The solicitation was posted on October 29, 2026, with a response deadline of November 13, 2026.

POSTED

DEADLINE

Quality Assurance, Inspection, and Testing Services

POSTED

DEADLINE

ENVIRONMENTAL QUALIFICATION TESTING (EQT)

Solicitation # N0016427SNC12

The US Navy, through NSWC Crane, is issuing a Request for Information (RFI) under announcement N00164-27-S-NC12 to identify qualified contractors capable of performing Environmental Qualification Testing (EQT) and electromagnetic compatibility (EMI) testing. The objective is to verify that the Combined All-Domain Command and Control System Afloat (CAC2S Afloat) Data Processing Assembly and Workstation Mount meet naval shipboard survival and operational requirements following a hardware technology refresh. Testing must adhere to several military standards, including MIL-DTL-901E for shipboard shock, MIL-STD-167-1A for vibration, MIL-STD-461G for electromagnetic interference, MIL-STD-810H for environmental engineering, and MIL-STD-1399 for shipboard power interfaces. Interested parties must be registered in the System for Award Management (SAM) and the Joint Certification Program (JCP) to access the full Statement of Work. The government is seeking capabilities and budgetary estimates from commercial firms, non-profits, and academic institutions, with a strong encouragement for small and disadvantaged businesses to respond. Submissions, which may include a white paper of up to five pages and company literature, are due by November 18, 2026. While this RFI is used for market research to determine if the effort should be pursued via sole source or competitive procurement, the government explicitly states that no funding is currently available and this notice does not constitute a formal solicitation or commitment to award a contract.

POSTED

DEADLINE

OGDC-SCM-SER-CB-DO-342367717-2026 HIRING OF TUBULAR INSPECTION SERVICES

Solicitation # OGDC-SCM-SER-CB-DO-342367717-2026

The Oil & Gas Development Company Limited (OGDCL) has issued solicitation number OGDC-SCM-SER-CB-DO-342367717-2026 for the hiring of tubular inspection services to be performed in Pakistan. This procurement opportunity was posted on October 29, 2026, and requires interested parties to submit their e-bids through the SAP Ariba Discovery portal. The deadline for bid submissions is November 16, 2026, at 14:30 hours, with bid openings scheduled to occur 30 minutes after the closing time. Administrative inquiries and coordination are managed by the General Manager of Supply Chain Management at the OGDC Headquarters in Islamabad. While the specific contract value and detailed performance schedules are not provided in the initial solicitation notice, the primary objective is the procurement of specialized tubular inspection services.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 7 hours ago

DEADLINE

in 18 days

General Info

Agency

Department Of Energy → Argonne National Labor - DOE Contractor

NAICS

541380 - Testing Laboratories and Services

Place of Performance

IL, USA

Set-Aside

NONE

Documents

Appendix D-8-C: Intellectual Property Provisions

specifications

High

Argonne National Laboratory RFQ 4-B185-Q-00507-00

rfq

High

Argonne National Laboratory SOW - Industrial Hygiene Analysis (Mod 1)

2 pages · sow

High

Argonne Quality Assurance Procurement Requirements - General Items

specifications

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 30

Solicitation

Response DeadlineMay 31

Deadline has passed

Submission Closed

05/31/2024, 08:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Energy → Argonne National Labor - DOE Contractor

Contacts1 person available

OfficeLemont, IL, 60439, USA

Organization / AgencyDepartment Of Energy → Argonne National Labor - DOE Contractor

Office AddressLemont, IL, 60439, USA

Contacts

Laura Sanchez

contact@example.gov

+1 (555) 000-0000

Full Description

Looking to source analytical testing service of contaminated samples via the following most requested analyses: Beryllium/Air Filters and Wipes (NIOSH 7303, EPA SW-846 6020A, EPA SW-846 6010C) Arsenic, Cadmium, Chromium, Lead - Wipes and Air Filters (NIOSH 7303, EPA SW-846 6020A, PA SW-846 6010C) Transmission Electron Microscopy (NIOSH 7402) PCM Asbestos (NIOSH 7400) Perchlorate by Ion Selective Electrode (Brookhaven Analytical Procedure IH75200, Perchlorate and Perchloric Acid Sampling and Analysis) In accordance with the requirements found in the attached Statement of Work for a one-year base period and two additional one (1) year option periods. If these services can be offered, please provide the following: Price List ANL-70 (complete) ANL-71 COM (review and accept) ANL-562 IP (review and accept) Statement of Work (review) ANL-407 (review)