Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Industrial Prime Coating Application

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Industrial Prime Coating Application supports DLA Weapons Support projects and is designated as a Total Small Business Set-Aside. The scope of work involves providing a prime coat finish for two fabricated crane booms, which includes comprehensive surface preparation through degreasing and sandblasting. All work must be performed in industrial spray booths using military-grade primer in strict accordance with the DLA Master List of Technical and Quality Requirements. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency, with performance taking place in Tracy, California. Interested parties should note the response deadline of October 23, 2026. The contract falls under NAICS code 332812 and requires the delivery of a uniform prime coat finish on the specified equipment.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

332812 - Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7L3-27-T-0579.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOOM, CRANE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Applies a prime coat finish for prime contractors on DLA Weapons Support projects. Performs surface preparation including sandblasting and degreasing, followed by the application of military-grade primer to fabricated crane booms. Utilizes industrial spray booths and adheres to the DLA Master List of Technical and Quality Requirements. Delivers two crane booms with a uniform prime coat finish.

Similar Contracts

Same NAICS industry code

Supply of Certified Aerospace Alloy StockThis subcontract involves the supply of certified aerospace-grade raw metal alloy stock, specifically in the form of bars or wire, for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the chemical and physical properties outlined in NASM20426, NASM5674, and drawing NR 13873. To ensure quality and regulatory compliance, the provider must deliver full material traceability and Mill Test Reports, while guaranteeing that all material origins comply with the Berry Amendment and the Buy American Act. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with the place of performance located at Tinker AFB. Interested parties must respond by October 23, 2026, to provide the certified raw material stock directly to the manufacturer.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Swivel Assembly Casting and ForgingThis subcontract opportunity is for the casting or forging of raw metal into near-net shape swivel assembly components for prime contractors supporting DLA Weapons Support ASC projects. The selected provider will produce components for NSN 1650014884018 using industrial furnaces or forging presses, delivering either rough or semi-finished parts. All work must be performed according to specific technical data and in strict adherence to the DLA Master List of Technical and Quality Requirements. The contract is a total small business set-aside under NAICS code 332812, managed by the Department of Defense. To be eligible, contractors must maintain an inspection system compliant with SAE AS9003 or ISO 9001. The place of performance is located in Tracy, California, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Industrial Painting and Finishing for BracketryThis subcontract involves providing specialized industrial paint finishing services for the DLA Weapons Support Land Supply Chain. The scope of work requires the surface preparation and coating application of one double angle bracket, which must be executed in an industrial facility capable of meeting strict DCCS standards. All work must adhere specifically to DCCS Drawing 16236 CS-2300-0001. The opportunity is categorized under NAICS code 332812 and was posted on October 15, 2026, with a response deadline of October 26, 2026. The project is managed through the Department of Defense for the DLA Weapons Support Land Supply Chain.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Manufacture of Chain End Links (NAS1049-12)This subcontract involves the manufacture of 20 units of 3/4 inch chain end links, part number NAS1049-12, for prime contractors supporting DLA supply contracts. The parts must be fabricated using precision machining or forging in strict accordance with Technical Standard NAS1049 Revision 04. Performance will take place in Greensboro, North Carolina, under the oversight of the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is required to maintain a quality management system certified to SAE AS9003 or ISO 9001 standards and must ensure full compliance with the Buy American Act. Quality sampling must be implemented per MIL-STD-1916 or ASQ H1331 to ensure all 20 finished links are properly inspected. Responses to this solicitation are due by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Specialized Paint Finishing for Angle BracketsThis subcontract involves providing specialized industrial paint finishing services for fabricated angle brackets to support prime contractors on DLA Weapons Support Land Supply Chain projects. The work requires the application of coatings in strict accordance with DCSC Drawing 16236 CS and DLA Master List surface preparation standards, utilizing industrial painting facilities to ensure all military defense specifications are met. The project is managed under the Department of Defense for the DLA Weapons Support Land Supply Chain, with performance taking place in New Cumberland. Interested parties must adhere to the response deadline of October 26, 2026, for this effort categorized under NAICS code 332812.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Grade Topcoat ApplicationThis small business set-aside subcontract involves the application of military-grade protective topcoats for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations Vehicle Support projects. The scope of work requires the surface preparation and application of Green 383, Chip No. 34094 paint using industrial spray booths to deliver finished shock absorbers that strictly comply with military paint specifications. The opportunity was posted on October 13, 2026, with a response deadline of October 23, 2026. Classified under NAICS code 332812, this project is designated as a total small business set-aside for prime contractors providing specialized coating services.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Corrosion-Resistant Steel (CRES) Raw Material SupplyThis subcontract involves the supply of certified Corrosion-Resistant Steel raw materials to prime contractors supporting DLA Weapons Support projects for B-1B aircraft. The scope of work includes sourcing and cutting aerospace-grade steel to specific dimensions and providing comprehensive Material Test Reports to ensure full traceability of all delivered materials. The project is managed under the Department of Defense through the DLA Weapons Support Fluid Handling Division, with performance taking place at Tinker AFB. Strict adherence to the Buy American Act and the Berry Amendment is required for all materials provided under this agreement.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aircraft Wheel Half Casting and Forging ServicesThis subcontract, issued by the Department of Defense DLA Weapons Support ASC, involves the initial shaping of aircraft wheel half blanks for part number C20642000. The selected provider will utilize industrial furnaces or forging presses and custom dies to execute casting or forging processes, delivering either rough-machined or near-net shape components to prime contractors. Performance will take place in New Cumberland, Pennsylvania. The contract is designated as a Total Small Business Set-Aside under NAICS code 332812. Strict adherence to quality and security standards is required, including Critical Application Item standards, SAE AS9003 or ISO 9001, the Berry Amendment, and CMMC Level 2. The solicitation was posted on October 12, 2026, with a response deadline of October 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Fastener Grade Alloy/Steel SupplyThis subcontract for Specialized Fastener Grade Alloy/Steel Supply involves the provision of raw metal stock bars, rods, or wire to prime contractors supporting the DLA Weapons Support ASC. The supplier is responsible for delivering certified raw materials that strictly adhere to the metallurgical specifications of NSN 5325-01-165-7694. To ensure full traceability and quality assurance, the contractor must provide comprehensive Material Test Reports for all delivered stock. Compliance with the Berry Amendment and the Buy American Act is mandatory, requiring the domestic sourcing of all materials. The performance of this contract is centered in Jacksonville, and the supplier is tasked with delivering the certified raw metal stock directly to the manufacturer. This effort falls under NAICS code 332812 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Industrial Coating and FinishingThis subcontract for Industrial Coating and Finishing supports the Department of Defense through the DLA Weapons Support Land Supplier operations. The selected provider will perform surface treatment and protective coating applications for ammunition racks, utilizing industrial spray and curing equipment. All work must be executed in strict accordance with the DLA Master List of Technical and Quality Requirements, reference drawings, and MIL-STD-129 marking standards to ensure the delivery of fully compliant, finished assemblies. The project is categorized under NAICS code 332812 and will be performed in Anniston, Alabama. Interested parties must respond by October 23, 2026, to provide these specialized finishing services for prime contractors operating within the DLA Weapons Support Land Supplier framework.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Metal Finishing and Coating for Access CoversThis subcontract opportunity involves providing secondary finishing operations for cast metal access covers under the DLA Weapons Support Land Supply Chain. The scope of work includes deburring, grinding, and the application of protective coatings in strict accordance with technical specifications. Due to the nature of the export-controlled drawings required for the project, the contractor must maintain JCP certification to ensure compliance and secure access to necessary documentation. The project is designated as a Total Small Business Set-Aside under NAICS code 332812 and is managed by the Department of Defense. Performance will take place in Tracy, California. Interested parties must submit their responses by October 23, 2026, to be considered for the delivery of these finished and coated components.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Raw Rod Stock for NSN 5306-01-411-3424This subcontract, issued by the Department of Defense for the DLA Weapons Support ASC Commodities Division, involves the supply of raw metal rod stock for NSN 5306-01-411-3424. The selected provider is responsible for sourcing and cutting high-grade alloy or steel to the specific lengths outlined in DWG 12364827-2 and delivering the certified stock to the manufacturer. To ensure quality and compliance, the contractor must provide Material Test Reports and strictly adhere to the domestic sourcing requirements of the Buy American Act and the Berry Amendment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332812, with the place of performance located in New Cumberland. Interested parties must respond by October 20, 2026. This procurement ensures that prime contractors receive the necessary raw materials to meet the rigorous standards required for defense commodities.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors under the DLA Weapons Support Land Supplier Opns Vehicle Spt. The scope of work involves providing specialized military packaging, marking, and shipping services, ensuring all items are processed according to MIL-STD-2073-1E and MIL-STD-129 standards while implementing DLA requirements RP001. The contractor is responsible for utilizing MIL-SPEC crates and moisture barriers to prepare shipments for FOB Destination delivery. The project is managed under NAICS code 488510 for the Department of Defense. All fully packaged and marked shipments are to be delivered to FPO AE 09573. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Helical Compression Spring Supplier (NSN 5360015039972)This subcontract involves the supply of one helical compression spring for prime contractors supporting the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt project. The supplier is responsible for manufacturing or sourcing the component in strict accordance with NSN 5360015039972 and the DLA Master List of Technical and Quality Requirements. To ensure compliance, all spring winding machinery and materials used must adhere to the Buy American Act and the Berry Amendment. The project falls under NAICS code 332613, with a response deadline set for October 26, 2026, and performance located at FPO 09573.

Spring Manufacturing

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract opportunity, titled Military-Grade Packaging and Marking Services, is issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt. The contract involves providing specialized packaging and marking services for prime contractors fulfilling DLA supply contracts. Requirements include packaging components according to RP001 standards and marking shipments in compliance with MIL-STD-129 and ASTM D3951. The service provider must utilize MIL-SPEC materials and labeling equipment to ensure shipments are ready for transport under FOB Origin terms. This is a Total Small Business Set-Aside under NAICS code 493110. The solicitation was posted on October 15, 2026, with a response deadline of October 30, 2026. Interested parties can find further details through the DIBBS portal.

General Warehousing and Storage

POSTED

about 19 hours ago

DEADLINE

Vehicle Spring Hanger ManufacturingThis subcontract opportunity is for the manufacture of vehicle spring hangers, specifically part number 16-18353-000 under NSN 2510015768718, to support prime contractors delivering for the Department of Defense DLA Weapons Support Land Supplier Operations. The project requires strict adherence to the DLA Master List of Technical and Quality Requirements, and all materials must be compliant with the Buy American Act and the Berry Amendment. Additionally, the selected provider must meet NIST SP 800-171 cybersecurity standards to ensure data protection. The contract is designated as a Total Small Business Set-Aside under NAICS code 336390. Interested parties must submit their responses by October 30, 2026, following the posting date of October 15, 2026. The primary objective is the delivery of finished vehicle spring hangers that meet all specified military and federal quality standards.

Other Motor Vehicle Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

Manufacture and Supply of Access Covers (NSN 2590016945732)This subcontract involves the manufacture and supply of 10 access covers, identified by NSN 2590016945732 and part number BL-14647-1, for prime contractors supporting DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. All fabrication must strictly adhere to RA001 technical and quality requirements as well as RQ011 identification standards. The contractor is responsible for packaging and labeling all components in accordance with ASTM D3951 and MIL-STD-129 standards. Once completed, the finished and labeled units must be delivered to the DLA Distribution DDSP facility located in New Cumberland. The procurement falls under NAICS code 332710, with a response deadline set for October 26, 2026.

POSTED

about 19 hours ago

DEADLINE

Special Purpose Borosilicate Glass Fiber Insulation SupplierThis subcontract opportunity is a Service-Disabled Veteran-Owned Small Business set-aside for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The selected supplier will manufacture and deliver 55 specialized borosilicate glass fiber thermal insulation sheets measuring 36 by 60 inches with a half-inch thickness, a density of 6 lbs, and UV resistance. All materials must be packaged in waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117 standards and delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. To be eligible for this contract, the supplier must maintain ISO 9001:2015 certification and demonstrate CMMC Level 2 compliance. The procurement falls under NAICS code 327213. Interested parties must submit their responses by October 26, 2026.

Glass Container Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Direct Action Shock AbsorbersThis subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations, requires the procurement and delivery of 20 brand-specific shock absorbers. The contractor is responsible for sourcing Daimler Truck North America LLC part number 18-62891-000, also identified by NSN 2510015766321, for use by prime contractors. Delivery is specified as FOB Origin. The agreement mandates strict adherence to packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA RP001. Additionally, the provider must ensure full compliance with the Buy American Act, the Berry Amendment, and the DLA Master List RA001. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 423810.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Waterproof Packaging ServicesThis subcontract involves providing specialized waterproof packaging services for prime contractors supporting the DLA Weapons Support Land Supplier Opns Vehicle Spt. The scope of work requires the packaging of 823 units of seals using medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. Additionally, the contractor is responsible for all marking and labeling tasks following MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards. The completed and marked units are to be delivered to DLA Distribution in New Cumberland. This project falls under NAICS code 339999 and is managed under the Department of Defense. The response deadline for this opportunity is October 26, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 19 hours ago

DEADLINE

Plain Encased Seal ManufacturerThis subcontract involves the manufacture of 823 plain encased seals for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Opns Vehicle Spt. The seals must be fabricated according to the dimensions and material specifications of NSN 5330-01-579-2727, with strict prohibitions against the use of asbestos or additive manufacturing processes. The project requires full compliance with the Buy American Act and the Berry Amendment to ensure domestic sourcing of materials. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 326199. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026.

All Other Plastics Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-DTL-117 Waterproof/Greaseproof PackagingThis subcontract involves providing specialized military-grade packaging services for prime contractors supporting DLA supply contracts. The primary scope of work requires sealing sensitive gaskets in medium-duty, waterproof, and greaseproof opaque bags to prevent deterioration from ultraviolet rays. All operations must be performed using industrial sealing equipment and materials that strictly adhere to MIL-DTL-117 specifications. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance of the contract will take place in Cherry Point, North Carolina, under NAICS code 561910. The response deadline for this opportunity is October 26, 2026.

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Supply of Pratt & Whitney Gaskets (NSN 5330015378292)This subcontract involves the procurement and delivery of 32 precision gaskets, specifically Part Number 3039944 from Pratt & Whitney Canada Corp, identified by NSN 5330015378292. The items are to be delivered FOB Origin to DLA Distribution Cherry Point, North Carolina, under the agency oversight of the Department of Defense DLA Weapons Support Land Supplier Operations. Compliance requirements include strict adherence to the Buy American Act and the application of quality sampling methods MIL-STD-1916 or ASQ H1331. Additionally, the contractor must provide a CMMC Level 2 Self-Assessment. The opportunity is categorized under NAICS code 423840, with a response deadline set for October 26, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Waterproof/Opaque Packaging for Rubber/Polymer ComponentsThis subcontract involves providing specialized packaging and sealing services for rubber and polymer components supporting DLA Weapons Support Land Supplier Ops projects. The scope of work requires sealing gaskets in medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1. All items must be processed using industrial vacuum and heat sealing systems to ensure a shelf life of 180 months. The contractor is responsible for applying all necessary markings and labels following MIL-STD-129 and MIL-STD-130N standards. Performance for this Department of Defense project will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS