Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Ink Pumps

Active
2031ZA26N00051Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Bureau of Engraving and Printing, under the Department of the Treasury, intends to award a sole source, firm-fixed-price contract to procure ten Graco Pumps 63:1 Ratio 200L D200 Supply Units with Part Number RCM1559 for use on Super Orlof Intaglio Presses in currency manufacturing. Although the requirement specifies the Graco brand name to ensure compatibility and performance with critical equipment, the contract is fully set aside for small businesses, encouraging competition among authorized small business distributors and resellers who can supply genuine manufacturer components. This procurement will be conducted using simplified acquisition procedures and a Justification and Approval for sole source sourcing. The notice is not a solicitation for offers but serves as a transparency measure to allow industry participants to assess their ability to meet the requirement. Any costs related to responding to this notice, including the preparation of capability statements or inquiries, are the sole responsibility of the respondent and will not be reimbursed. All submissions must be sent via email to erica.hemphill@treasury.gov no later than 5:00 PM Eastern Standard Time on August 12, 2026. Respondents must be registered and active in the System for Award Management, and the contract performance will take place in Fort Worth, Texas, with the North American Industry Classification System code 333248. The solicitation number is 2031ZA26N00051 and was posted on July 29, 2026.

General Info

Sole source contract for ten Graco pumps set aside for small businesses, performance in Fort Worth, Texas, deadline August 12, 2026.

Agency

Department Of The Treasury → Bureau Of Engraving And PrintingView Agency

NAICS

333248 - All Other Industrial Machinery ManufacturingView NAICS

Place of Performance

Fort Worth, TX, 76131, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Treasury → Bureau Of Engraving And Printing
Contacts1 person available
OfficeN/A
Organization / Agency
Department Of The Treasury → Bureau Of Engraving And Printing
View Agency Profile
Office AddressN/A
Contacts
Erica Hemphill
contact@example.gov

Full Description

Show more

The Treasury Common Services Center, Acquisition Services on behalf of the Office of Currency Manufacturing intends to award a sole source, firm-fixed-price contract to purchase Brand name Graco Pumps 63:1 Ratio 200L D200 Supply Unit, Part Number RCM1559 utilizing a Justification and Approval using simplified acquisition procedures.


This procurement is for the purchase of ten (10) each Graco Pumps 63:1 Ratio 200L D200 Supply Unit, Part Number RCM1559 for the Super Orlof Intaglio Presses used by Bureau of Engraving and Printing for currency manufacturing.


This procurement will be a 100% Set-Aside for Small Businesses. While the item is limited to the Graco brand name to protect the equipment, we anticipate and encourage competition among authorized small business distributors and resellers who can deliver the genuine manufacturer components.


This Notice of Intent is not a request for competitive offers/quotes/proposals. This notice gives the public transparency regarding this restriction and allows industry partners to verify whether they can meet the requirement. Any cost associated with the preparation and submission of data or information, or any other costs incurred in responding to this notice is the sole responsibility of the respondent and will not be reimbursed by the Government.


Capability statement, comments, questions or concerns regarding this notice MUST be received via email ONLY to erica.hemphill@treasury.gov NO LATER THAN 5:00PM, EASTERN STANDARD TIME, 12 AUGUST 2026. Additionally, interested sources must be registered and currently active in the System for Award Management (SAM), found at https://www.sam.gov.

Similar Contracts

Same NAICS industry code

NAICS: 333248
New
Federal
36--BLADE,SHREDDING MACThe solicitation seeks a single item, NSN 3615014468185, a shredding blade for MAC equipment, with a quantity of 13 units to be delivered to DLA Distribution facility W1A8 within 165 days after award. The procurement is conducted as a Request for Quote under solicitation number SPE8EN26T2733, with a response deadline of August 10, 2026, and is exclusively available through electronic submission; no hard copies are provided. All responsible sources may submit quotes, but this is a Small Business Set Aside, total, meaning only small business concerns are eligible to compete, and the NAICS code 333248 applies to the manufacturing classification. The solicitation originates from DLA Troop Support, Office of the Department of Defense, located in Philadelphia, Pennsylvania, and all inquiries must be directed to the designated buyer email listed in the solicitation document, accessible via the provided SAM.gov link. Digital technical documentation including drawings, military specifications, and standards can be retrieved or ordered electronically as part of the procurement process.
DLA Troop Support

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333248
New
DIBBS
LITMUS PAPERLITMUS PAPER, ACS, 30’S under NSN 6640-01-485-6075 must be packaged in commercial-grade sealed unit containers that protect against damage or breakage, with exterior shipping containers suitable for safe delivery via common carriers at the lowest cost to the designated delivery point in APO, 96368-5268. Each unit consists of 30 strips per packet, packed in one page (1 PG), with individual strips sealed in foil packets containing a printed color chart for pH determination. The product must have an 18-month shelf life, and no more than three months may have passed between the date of manufacture and delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. Bidders must clearly specify the source and part number being offered. This acquisition is governed by DLA Packaging Requirements for Procurement and incorporates technical and quality standards from the DLA Master List. The solicitation, issued under SPE2DH-26-T-5578, requires bids by August 4, 2026, with delivery expected within 20 days of award.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
DIBBS
MILLING MACHINE, VERThe contract pertains to the procurement of two vertical milling machines under solicitation SPE8E5-26-T-3708, awarded by the Defense Logistics Agency on behalf of the Department of Defense. The items, identified by NSN 3417-01-387-1118 and part numbers JMD-18PFN and 350020 from JPW INDUSTRIES INC., are required in a quantity of two units with a delivery deadline of 20 days from award, shipped FOB origin. All packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s RP001 packaging requirements, and all technical and quality specifications referenced by R or I numbers take precedence over general standards. The supplies must be delivered to the designated military receiving facility in San Diego, California, with shipment required via the fastest traceable means—parcel post is prohibited. The unit of issue is each, with no variance permitted in quantity, inspection and acceptance occur at destination, and all markings must adhere strictly to federal packaging and labeling mandates. The delivery must be completed by January 6, 2026, and the contractor is bound by comprehensive DLA technical, quality, and logistical directives that override any conflicting standards. Government use codes, shipping identifiers, and point of contact details are included for administrative control, with primary liaison being Don Trachtman.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333248
New
DIBBS
COVER GLASS, MICROSCOPEThe product is a high-quality microscope slide cover glass composed of non-fogging, non-corrosive borosilicate glass with parallel surfaces and uniform homogeneity to ensure consistent wetting. It is optically clear, colorless, and exhibits low auto-fluorescence, making it suitable for all levels of microscopy. Each cover glass is pre-cleaned and washed, ready for immediate use. The dimensions are 22mm by 22mm with a thickness of #1, ranging from 0.13mm to 0.17mm. The item is sold by weight in 1-ounce containers, with ten containers per package. The unit of issue is each. The NSN is 6640-01-718-7221, and the purchase request number is 7017651767. Delivery is required within 20 days after order placement. This solicitation, identified as SPE2DH-26-T-5600, was posted on July 28, 2026, with a response deadline of August 4, 2026. It is issued under the NAICS code 333248 by the Department of Defense through the Medical Supply Chain FSH, with performance at APO 09094-3219. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with DLA standards. Government identification must be removed from non-accepted supplies. The primary point of contact is Tina Vu, reachable via email and phone.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
DIBBS
BLADE, SHREDDING MACThis contract specifies the procurement of a shredding blade identified by NSN 3615-01-446-8185, with a quantity of 13 units to be delivered within 165 days under solicitation SPE8EN-26-T-2733, which is a total small business set-aside. The item is designated as a critical application item with technical drawings referenced under revision H dated 03/22/2000 and other associated revision levels for related part numbers, all controlled by the DLA Master List of Technical and Quality Requirements. Compliance with MIL-STD-1916 or ASQ H1331 sampling standards is required, with zero nonconformances mandated unless otherwise stated, and attributes must be verified at specified levels or AQLs. The blade may require casting or forging, and the contractor is directed to submit a Casting and Forging Assistance Request if specialized tooling or materials are needed. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 marking standards with no special marking code applied, and palletization must follow DLA packaging guidelines. Delivery is FOB origin to the DDSP New Cumberland facility in Pennsylvania, with inspection and acceptance occurring at destination. The contract emphasizes strict adherence to DLA procedures for transportation, freight shipping, and unit of issue conversion, and the vendor is required to meet the original delivery schedule of May 20, 2027, with a need ship date of April 28, 2025. All technical data is available only during the open solicitation period via the DIBBS portal.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333248
New
Federal
Press Brake Supply and ManufacturingThe contract calls for the supply and manufacturing of a hydraulic or pneumatic press brake engineered to meet military specifications, ensuring robust performance and reliability for defense applications. All work must adhere strictly to DFARS regulations and achieve CMMC Level 3 compliance, requiring rigorous cybersecurity controls and documented processes to safeguard controlled unclassified information throughout the manufacturing lifecycle. Quality assurance protocols are mandatory, encompassing inspection, testing, and documentation procedures aligned with defense standards to guarantee product integrity and traceability. This is a total small business set-aside under the SBA program, restricted exclusively to small businesses as defined by the NAICS code 333248, which covers other forging and stamping industries. The solicitation was posted on July 28, 2026, with responses due by August 6, 2026, and performance is expected to be localized in Biloxi. The contracting activity falls under the Department of Defense, specifically FA3010 81 Cons Cc, and while no point of contact is listed, interested parties must submit proposals through the official SAM.gov portal to be considered for award.
FA3010 81 Cons Cc

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 333248
New
Federal
Press BrakeThe contract is for a press brake device to be supplied in strict accordance with the technical specifications outlined in Attachment 1 – Salient Characteristics, ensuring compliance with operational and performance standards for manufacturing applications. The solicitation, identified by number FA301026Q0027, was posted on July 28, 2026, with a response deadline of August 6, 2026, at 3:00 PM Eastern Time, and is exclusively reserved for small businesses under the Small Business Administration’s Total Small Business Set-Aside program, classified under NAICS code 333248 for hydraulic and pneumatic power press and stamping machine manufacturing. The awarding agency is the Department of Defense, specifically the FA3010 81 Cons Cc office located at Keesler Air Force Base in Mississippi, with the place of performance designated as Biloxi, Mississippi. Primary point of contact for inquiries is Zachary Willard, reachable via phone at 228-377-0510 or email at zachary.willard.1@us.af.mil. All prospective bidders must submit proposals through the official SAM.gov portal linked in the solicitation details, and failure to comply with the referenced attachment’s technical requirements will render submissions nonresponsive.
FA3010 81 Cons Cc

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 333248
New
Federal
Potting CentrifugeThe Chemical Sciences Division at Oak Ridge National Laboratory is seeking to procure a Potting Centrifuge under solicitation number 480693, with the request issued on July 28, 2026, and responses due by August 6, 2026, at 9:00 PM Eastern Time. The equipment is designated for use at the laboratory’s facility in Oak Ridge, Tennessee, and specifications are detailed in Attachment C – Bill of Materials, which offerors must reference for precise technical requirements. The solicitation is classified as combined, indicating it may include both competitive and non-competitive elements, and the North American Industry Classification System code 333248 identifies the procurement as related to other industrial machinery manufacturing. The contract is being managed by UT-Battelle LLC, the Department of Energy’s contractor at Oak Ridge, with Jacob Spradley serving as the primary point of contact for inquiries via email at spradleyjv@ornl.gov. All deliveries and performance are expected to occur at the Oak Ridge, Tennessee facility, with a ZIP code of 37830, and the full solicitation details can be accessed through the official SAM.gov portal.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 333248
New
SLED
Poultry IsolatorTexas A&M University is soliciting bids for the supply of Poultry Isolators at its College Station campus under solicitation number TAMU-TAMU-ITB-26-5077, with a posted date of July 27, 2026, and a deadline for responses on August 11, 2026. All technical specifications and requirements are available through the AggieBid e-commerce portal, and vendors must submit their bids electronically via this system; paper or manual submissions will not be accepted. Participation requires prior vendor registration on the AggieBid platform, which also grants access to future bid opportunities. By submitting a response, vendors agree to be bound by the terms and conditions outlined in the AggieBid portal and the official Texas A&M purchase terms available online. Primary point of contact for the procurement is Jim Nelms, reachable at dallasj@tamu.edu, while general inquiries about the process should be directed to purchasing@tamu.edu.
Texas A&M University

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 333248
New
DIBBS
INCUBATOR, DRY HEATThe contract is for the procurement of two dry heat incubators designed for laboratory applications requiring precise temperature control and stability, with a range of ambient plus five to 120 degrees Celsius. These multi-purpose units are suitable for incubating cultures, conducting enzyme reactions, immunological assays, and determining melting or boiling points. Each unit includes a VWR heater block digital 2 120 with part number 75838-282, two VWR block modules with 20 holes of 13 mm diameter (part number 13259-130), and a transit case (part number DSI-051524-2000). The item is identified by NSN 6640-01-730-9677 and is ordered in quantities of two under purchase request 7017628351. Delivery is required within 20 days of award. The solicitation is issued under contract number SPE2DH-26-T-5548 with a response deadline of August 3, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH. Technical and quality requirements are governed by the DLA Master List, and packaging and identification standards must comply with DLA regulations including the removal of government identification from non-accepted supplies. The point of contact for inquiries is Tina Vu, with email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333248
New
Federal
CNC TOOL GRINDERDLA Weapons Support in Richmond is preparing to issue a full and open competition solicitation for one CNC Tool Grinder under solicitation number SPE4A8-26-Q-0055, with a target release date of August 20, 2026. The contract requires delivery and completion within 425 days after award and will be awarded under FAR 13.5 procedures as a firm, fixed-price agreement. A complete technical data package is included, specifying all design, lubrication, supply, and labor requirements for the equipment. Delivery terms follow FOB Destination with inspection at origin and acceptance at destination, and performance is to occur in San Diego, California. Responses must be submitted via email to the Acquisition Specialist or uploaded to DIBBS by the deadline of September 21, 2026, and all solicitation materials are accessible through the DIBBS website. The NAICS code is 333248, and primary point of contact is Chanda Tyler, reachable via phone and email for inquiries. Solicitations are provided in PDF format and require Adobe Acrobat Reader for viewing, with limited paper or email copies available upon request for those unable to access DIBBS.
DLA Aviation

POSTED

2 days ago

DEADLINE

in about 2 months
View Details
NAICS: 333248
New
Federal
Supply and installation of Xerox Copier or equivalentThe contract solicits the supply and installation of a Xerox Proficio 300 Digital Color Press or an equivalent model for use at the US Embassy in Kathmandu, Nepal. The equipment is intended to support official printing operations and must meet specified performance standards, with the successful bidder responsible for delivery, setup, and integration at the designated location in Kathmandu, Bāgmatī, with a postal code of 44600. The solicitation, identified by number 19NP4026Q7285, was posted on July 27, 2026, and responses are due by August 11, 2026, at 11:15 AM Eastern Time. No set-aside preferences are applied, and the North American Industry Classification System code 333248 applies to the procurement. The contracting office is under the Department of State, located in Washington, DC, with primary point of contact Albina Collingham and secondary contact Sanju Gurung available for inquiries via official email addresses. All activities related to this procurement are governed by federal acquisition regulations and require compliance with export and security protocols applicable to U.S. Government operations overseas.
US Embassy Kathmandu

POSTED

2 days ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of The Treasury → Bureau Of Engraving And Printing

Same awarding agency

NAICS: 541715
Federal
Bureau of Engraving and Printing (BEP) Request for Information (RFI) - R&D Hidden Machine-Readable Security Features - FY26The Bureau of Engraving and Printing (BEP), under the Department of the Treasury, has issued a Request for Information (RFI) designated 2031ZA26N00005 seeking innovative, hidden machine-readable security features for future U.S. currency. This RFI, posted on November 14, 2025, with a response deadline of November 15, 2026, is intended solely for market research and informational purposes and does not constitute a formal solicitation or contract. BEP aims to gather technical descriptions and preliminary non-proprietary samples of novel security technologies that are difficult to detect, reverse-engineer, or duplicate, and can be authenticated by standalone detection systems. The features sought must be new, not publicly disclosed or commercially available, and compatible with currency production and durability standards under typical environmental conditions. Respondents are required to submit a capability statement, brief technical descriptions, and physical preliminary samples to the BEP office in Washington, D.C. The evaluation will focus on four key technical attributes: the feature’s concealment from experts, resistance to functional analysis, machine readability by a discriminating detection device, and resistance to simulation or duplication both materially and functionally. The RFI emphasizes that no proprietary or classified information should be submitted, as BEP may use non-proprietary responses in future solicitations. Correspondence and submissions may be sent either electronically via designated BEP officials or physically to the BEP’s Office of Technology & Development. This RFI carries no commitment for contract award or payment, does not require standard certifications or compliance statements, and does not include contract clauses, pricing, or performance periods. The information obtained will inform future research and development efforts but creates no binding contractual obligations on the government.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

9 months ago

DEADLINE

in 4 months
View Details
NAICS: 541715
Federal
Bureau of Engraving and Printing (BEP) Request for Information (RFI) - R&D Overt Security Features - FY26The Bureau of Engraving and Printing (BEP), operating under the Department of the Treasury, has issued a Request for Information (RFI) numbered 2031ZA26N00006, seeking input on research and development of overt security features for U.S. currency. The objective is to identify novel counterfeit deterrent technologies that are easily recognizable by the general public without special tools and are resistant to replication by printing, digital reproduction, or commercial simulation. Respondents are invited to submit preliminary physical samples alongside brief technical descriptions and capability statements that demonstrate the proposed features' effectiveness, durability, environmental acceptability, and compatibility with existing currency production processes. This initiative is strictly for market research purposes, with submissions due by 2:00 PM Eastern Time on November 15, 2026. The place of performance and submission is Washington, D.C., specifically the BEP office at 301 14th Street, SW. This RFI does not constitute a solicitation or contract and imposes no binding obligations or financial commitments on the government. There are no formal contract clauses, representations, certifications, or pricing information associated with this request. The government will not pay for any proposals or responses received and reserves the right to use non-proprietary information obtained through this inquiry in future procurements. Evaluation considerations, while informal, will focus on innovation, ease of public authentication, and resistance to counterfeiting, but no formal evaluation criteria, weights, or awards are established. Submissions should avoid classified or proprietary information unless properly marked, and responses must be submitted via email to the designated points of contact at BEP. The RFI represents an exploratory step to inform potential future solicitations aimed at enhancing the overt security features of U.S. currency.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

9 months ago

DEADLINE

in 4 months
View Details
NAICS: 541380
Federal
Technical Evaluation & Testing SupportThe contract involves a subcontract for a third-party technical evaluation and testing of security features submitted to ensure their durability, machine-readability, environmental stability, and resistance to tampering or duplication. It is issued by the Bureau of Engraving and Printing under the Department of the Treasury and focuses on thorough technical assessment of security elements that are critical for maintaining product integrity and fraud prevention. Set to be performed in Washington, the contract falls under the NAICS code 541380, which pertains to testing laboratories. The solicitation was posted on November 14, 2025, with a response deadline of November 15, 2026. This contract emphasizes providing expert evaluation support to validate security properties under various conditions, thereby supporting the government’s efforts to implement robust, tamper-resistant security features.
Testing Laboratories and Services

POSTED

9 months ago

DEADLINE

in 4 months
View Details
NAICS: 339999
Federal
Prototype Sample Fabrication for Security TestingThis contract involves the fabrication of small-scale, functional prototypes or sample security features designed to undergo laboratory and field testing. The work will be conducted for the Bureau of Engraving and Printing under the Department of the Treasury, with a focus on creating prototype samples that can be evaluated internally or by external third-party testers to assess their security effectiveness. The subcontract is aimed at supporting the development and validation of new security elements that enhance the protection of currency or other sensitive documents. The solicitation is classified under NAICS code 339999, which covers various manufacturing services, and the place of performance is designated as Washington. Responses to this solicitation are due by November 15, 2026, providing ample time for interested parties to prepare and submit proposals. The contract prioritizes the precise creation of innovative security features at a prototype level, emphasizing quality and functionality to meet the stringent testing requirements stipulated by the Bureau of Engraving and Printing.
All Other Miscellaneous Manufacturing

POSTED

9 months ago

DEADLINE

in 4 months
View Details
NAICS: 541715
Federal
R&D of Hidden Machine-Readable Security FeaturesThis contract involves research, design, and development focused on creating novel machine-readable security features for U.S. currency. These security elements are intended to be non-commercially available and must be difficult to detect, simulate, or duplicate, ensuring enhanced protection against counterfeiting. The features developed under this contract will be integrated into currency and designed to be read only by specialized systems, providing a high level of security and authenticity verification. The contract is issued by the Bureau of Engraving and Printing, part of the Department of the Treasury, and is categorized under the NAICS code 541715, which pertains to research and development in physical, engineering, and life sciences. It is a subcontract opportunity based in Washington, with a posted date of November 14, 2025, and a response deadline of November 15, 2026. The solicitation does not specify a formal set-aside or particular organization type requirements. This initiative underscores the government’s commitment to advancing currency security through cutting-edge technological innovations.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

9 months ago

DEADLINE

in 4 months
View Details
NAICS: 541690
Federal
Technical Documentation and Market Research SupportThe contract involves the preparation of detailed technical descriptions focused on the security features of certain products. These descriptions will cover various critical aspects including the novelty of the security features, their effectiveness, resistance to counterfeiting, ease of public authentication, durability, and environmental impact. The purpose of these documents is to support submissions to government authorities, specifically the Bureau of Engraving and Printing under the Department of the Treasury. Scheduled to be posted in mid-November 2025 with a response deadline set for November 15, 2026, this subcontract falls under the NAICS code 541690, which pertains to other scientific and technical consulting services. The work will be performed in Washington, and it aims to provide technical documentation and market research support essential for advancing and validating security technologies in government-issued materials.
Other Scientific and Technical Consulting Services

POSTED

9 months ago

DEADLINE

in 4 months
View Details
NAICS: 325998
Federal
Prototype Sample Production for Security Feature TestingThe contract involves the fabrication and delivery of preliminary physical samples that demonstrate proposed currency security features. These samples must be suitable for evaluation under real-world conditions and compatible with existing currency production processes, ensuring their practicality and effectiveness in actual use. The purpose is to provide the Bureau of Engraving and Printing with tangible prototypes to assess new security measures before full-scale implementation. Issued by the Department of the Treasury's Bureau of Engraving and Printing, the subcontract is categorized under NAICS code 325998, which corresponds to specialized chemical manufacturing related to security features. The work is to be performed in Washington, with responses to the solicitation due by November 15, 2026. This opportunity focuses on advancing currency security through innovative prototype development, supporting the agency's mission to preserve the integrity of U.S. currency.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

9 months ago

DEADLINE

in 4 months
View Details
NAICS: 541715
Federal
Development of Novel Overt Security Features for CurrencyThis contract involves the research, design, and development of innovative, overt security features for U.S. currency aimed at preventing counterfeiting. The focus is on creating security elements that can be visually verified by the public without the need for tools and under normal lighting conditions, enhancing public authentication of currency. The work will be performed primarily in Washington for the Bureau of Engraving and Printing, under the Department of the Treasury. The opportunity is for a subcontract related to development efforts under NAICS code 541715, which corresponds to research and development in physical, engineering, and life sciences. The contract was posted on November 14, 2025, with a response deadline of November 15, 2026. Specific details such as set-aside status and organization type are not specified. The initiative reflects a strategic effort to bolster currency security through innovative and user-friendly anti-counterfeiting measures.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

9 months ago

DEADLINE

in 4 months
View Details