This Solicitation opportunity from Department Of Defense was posted on September 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

INSERT, PANEL FASTENER

Closed

SPE4A6-26-T-26QLFederal

Submission Closed09/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

SLED

Supply of Rail Fastening SystemsThis subcontract involves the supply of rail fastening systems and associated accessories for prime contractors working on Maryland Transit Administration light rail projects. The scope of work requires the provision of fasteners and tie anchor systems that are fully compatible with both standard and restraining rail concrete ties, ensuring all materials adhere to MTA and AREMA specifications. The specific deliverable for this contract is the provision of complete rail fastener sets for 1,000 concrete ties. Interested parties must submit their responses by November 17, 2026, in accordance with the solicitation posted on October 27, 2026.

Maryland Transit Administration

POSTED

DEADLINE

BABAA Compliant Reclamation Materials SupplierThis subcontract opportunity is for a supplier to provide specialized reclamation materials for prime contractors working on Virginia Department of Energy projects. The required supplies include 1/4 inch and 5/16 inch galvanized steel wire rope, galvanized earth and rock anchors from MacLean Power Systems or an equivalent brand, and certified seed and agricultural limestone. All materials must be delivered directly to the project site located in Blacksburg, Virginia. A critical requirement for this contract is the provision of formal certification ensuring all materials comply with the Build America, Buy America Act. Interested parties must submit their responses by November 2, 2026, to be considered for this procurement under NAICS code 332510.

Virginia Department of Energy

POSTED

DEADLINE

Manufacture and Supply of T-Bolt Chocks

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Manufacturer of Headless Straight Pins (Critical Safety Item)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Mounting Brackets (NSN 5340017253800)This subcontract involves the manufacture or procurement of four mounting brackets under NSN 5340017253800 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all items undergo FAA Bare Item Marking per RQ046, with packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129 standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. Strict compliance is required regarding zero-based sampling plans and supply chain traceability as outlined in DLAD Procurement Note C03. Additionally, the provider must meet all requirements of the Buy American Act and NIST SP 800-171. The final deliverable consists of four marked and packaged brackets delivered in accordance with the specified Department of Defense guidelines.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of NSN 5340016806874

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Mortise Latches (NSN 5340-00-794-0722)This subcontract involves the supply of 64 mortise latches, identified by NSN 5340-00-794-0722, for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The selected provider is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality control standards per MIL-STD-1916 or ASQ H1331 Table 1. All items must be packaged and marked according to MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. The final delivery of the 64 packaged and labeled units is designated as FOB Origin, with the place of performance located at Tinker AFB.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing and Supply of Clamp Loops (NSN 5340011313132)This subcontract involves the manufacture and supply of 437 Clamp Loops (NSN 5340011313132) for prime contractors supporting the DLA Weapons Support Active Devices Division. The project requires strict adherence to MIL-DTL-85052/1C Revision C and MIL-DTL-85052B Revision B specifications, as well as TDP Rev A Gen 1. All units must be of domestic origin and classified as Critical Application Items, with the supplier maintaining Qualified Products List approval. The contract is managed under NAICS code 332510 for the Department of Defense, with the place of performance located at Robins Air Force Base. Delivery of the 437 units is required on a FOB Origin basis. Interested parties must respond by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Precision Machined Mounting BracketsThis subcontract involves the fabrication and supply of precision machined mounting brackets for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the production of five brackets per NSN 5340-01-700-0035 and Part Number 12272-4317-01, with final delivery designated as FOB Origin to USA DEP Tobyhanna, Pennsylvania. The contractor must ensure strict adherence to the DLA Master List of Technical and Quality Requirements, MIL-STD-129, and ASTM D3951. Additionally, all materials used must be Berry Amendment compliant, and the use of Class I ozone-depleting chemicals is strictly prohibited. The project falls under NAICS code 332510 and is managed under the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Loop Clamps (NSN 5340-01-499-5552)This subcontract involves the manufacture or procurement of one loop clamp meeting NSN 5340-01-499-5552 specifications to support prime contractors for the DLA Weapons Support Land Supply Chain. The performance of this contract takes place at Tinker AFB, and the supplier is responsible for ensuring all items are packaged according to RP001 DLA Packaging Requirements. Strict adherence to labeling standards is required, specifically 29 CFR 1910.1200 and MIL-STD 129 for any hazardous or radioactive materials. The opportunity is categorized under NAICS code 332510, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturer of Headless Straight Pins (NSN 5315012854083)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Flat Pulleys (Critical Application)This subcontract involves the manufacture and supply of Flat Pulleys for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The contractor is responsible for fabricating parts using AISI 1212 or AISI 1215 steel in strict accordance with Basic Drawing NR 16236 CS-3020-SV-0708 and TDP Rev A Gen 1. Due to the critical nature of the application, the use of precision machining equipment is required to ensure all tolerances are met, and all components must comply with domestic origin requirements for delivery to government destinations. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332510, with the place of performance located in Tracy, California. Interested parties must submit their responses by November 9, 2026. This procurement is managed by the Department of Defense to ensure the steady supply of specialized hardware for critical defense logistics operations.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 12 days

AI Contract Overview

This contract is a solicitation for the procurement of eight panel fastener inserts, identified by NSN 5325-01-490-0911 and part number NAS1834-5-830. The items must be manufactured according to the current revision of the applicable non-government standard, NAS1834 Revision 8. Delivery is required within five days of order, with the shipment destined for the Letterkenny Army Depot in Chambersburg, Pennsylvania. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. Packaging and marking requirements are governed by MIL-STD-2073-1E and MIL-STD-129, while palletization must follow DLA packaging requirements. The contract specifies a zero percent quantity variance and requires shipping via the fastest traceable means, explicitly prohibiting the use of parcel post.

General Info

Procure eight NAS1834-5-830 panel fastener inserts for delivery to Letterkenny Army Depot.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332510 - Hardware Manufacturing

Place of Performance

1 OVERCASH AVENUE BLDG 9950, CHAMBERSBURG, PA, 17201-4150, USA

Set-Aside

NONE

Documents

SPE4A6-26-T-26QL Request for Quotations

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedSep 3

Solicitation

Deadline changedSep 17

Response deadline changed from Sep 11, 2026 to Sep 22, 2026.

Response DeadlineSep 22

Deadline has passed

Submission Closed

09/22/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

Sommer Yates

contact@example.gov

+1 (555) 000-0000

Full Description

INSERT,PANEL FASTENER
INSERT, PANEL FASTENER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NAS1834 REVISION NR 8 DTD 07/29/2022 PART PIECE NUMBER: STD P/N NAS1834-5-830
SPE4A6-26-T-26QL
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018121893 0001 EA 8.000
NSN/MATERIAL:5325014900911
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BV OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W25G1Q
W0L6 USA DEP LETTERKENY
LETTERKENNY ARMY DEPOT
1 OVERCASH AVENUE BLDG 9950
CHAMBERSBURG PA 17201-4150
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W25G1Q
W0L6 USA DEP LETTERKENY
LETTERKENNY ARMY DEPOT
1 OVERCASH AVENUE BLDG 9950
CHAMBERSBURG PA 17201-4150
US
MARKFOR
W25G1Q
SPE4A6-26-T-26QL
SECTION B
PR: 7018121893 PRLI: 0001 CONT’D
W0L6 USA DEP LETTERKENY
LETTERKENNY ARMY DEPOT
1 OVERCASH AVENUE BLDG 9950
CHAMBERSBURG PA 17201-4150
US
M/F: (TCN) W25G1Q624000R1
RDD:
PROJ: TP 1
SUPP ADD: W25G1Q SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: FC: VF
Need Ship Date:00/00/0000 Original Required Delivery Date:09/02/2026
SPE4A6-26-T-26QL NSN/Part Number: 5325-01-490-0911 Quantity: 8 EA Purchase Request: 7018121893QTY: 8 Delivery: 5 days ADO