Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

INSERT, SCREW THREAD

Active
SPE4A6-26-T-10ELFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 47 units of INSERT, SCREW THREAD with NSN 5325-00-417-4797 under solicitation SPE4A6-26-T-10EL, issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026, and delivery must be completed within 20 days after award. This item is sourced under a fully competitive process in accordance with a military or federal specification, and technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed; physical identification or bare item marking is required. Covered defense information may apply, and the point of contact for inquiries is Tywanda Maddox Addington at tywanda.maddoxaddington@dla.mil.

General Info

Procurement of 47 screw threads under DOD solicitation, delivery in 20 days, DLA standards apply.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

331315 - Aluminum Sheet, Plate, and Foil ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-10EL Request for Quotations DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Tywanda MADDOX ADDINGTON
contact@example.gov

Full Description

Show more
INSERT,SCREW THREAD
INSERT,SCREW THREAD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 5325-00-417-4797 Quantity: 47 EA Purchase Request: 7017669543QTY: 47 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331315
New
DIBBS
ALUM PLATE 4"THK X 10"
Solicitation # SPEFA1-26-Q-0096
Aluminum plate meeting SAE-AMS4108 specification in 7050-T7452 temper, sized at 4 inches thick by 10 inches wide by 22 inches long, is being procured in a quantity of three pieces, each measured in pounds. The contract requires strict adherence to material traceability, mandating certification or certificate of quality with each shipment, and all units must originate from the same heat lot. Each package must include specific object text IDs—RA001, RP001, RS002, RQ017, ZD080, and ZD088—and be packed per ASTM D3951, with packaging and labeling compliant with MIL-STD-129. Palletization must follow DLA packaging requirements for procurement under RP001. The item is subject to a firm fixed price with zero variance allowed in quantity, and inspection and acceptance occur at destination. Delivery is due within two days after award, and shipping must be conducted via the fastest traceable means—parcel post is prohibited. The freight destination is Building 660, Bay 3, Rogers Road, Naval Base Coronado, San Diego, with a separate parcel post address provided for reference. The contract number is SPEFA1-26-Q-0096, the NSN is 9540-LN-003-5651, and the delivery deadline is July 20, 2026. All government use codes and internal identifiers including the RDD, project, and supply chain codes are included for tracking and accountability.
DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

1 day ago

DEADLINE

in about 10 hours
View Details
NAICS: 331315
New
DIBBS
Metal Bar Manufacturing and SupplyThe contract requires the fabrication and supply of one metal bar identified by NSN 9510016109320, manufactured strictly in accordance with military specifications and compliant with Defense Logistics Agency technical and quality standards. The item must meet all required performance, dimensional, and material criteria as dictated by DLA to ensure suitability for defense applications. The solicitation is classified as a subcontract under NAICS code 331315, indicating the scope falls within the primary smelting and refining of nonferrous metals. The opportunity was posted on July 28, 2026, with a response deadline of August 10, 2026, and performance is to be delivered to a FPO address with ZIP code 96306-0001. The contracting entity is the Defense Logistics Agency under the Department of Defense, and while no specific point of contact or set-aside details are provided, all proposals must adhere to the technical and compliance requirements outlined by DLA. Subcontractors are expected to fully understand and meet the rigorous quality assurance protocols mandated for defense-related metal components.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Sheet Manufacturing and SupplyThe contract calls for the manufacture and supply of 23 aluminum sheets conforming to SAE AMS4268, AMS-QQ-A-250/4B, and ASTM B666 specifications, with a T81 temper condition and full certification required for all delivered material. These sheets must meet rigorous aerospace-grade standards for composition, mechanical properties, and surface quality, ensuring compatibility with high-performance applications in defense systems. The requirement is issued as a subcontract under the NAICS code 331315, indicating a focus on aluminum rolling and extrusion operations. The solicitation was posted on July 28, 2026, with a response deadline of August 4, 2026, and is managed under the Department of Defense through the Construction & Equipment MRO SVC I organization. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS platform at the provided URL. Full documentation and compliance verification must accompany delivery, and the supplier must demonstrate capability to consistently produce material meeting all listed standards with traceable test reports and certification.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 331315
New
DIBBS
Precision Aluminum Sheet Manufacturing & SupplyThe contract calls for the manufacture and supply of 70 units of Alclad 7075-T6 aluminum sheets adhering strictly to military specifications covering thickness, dimensions, and cladding requirements, ensuring the material meets rigorous performance and durability standards for defense applications. All units must be produced to exact tolerances and certified with appropriate documentation to verify compliance with the required metallurgical and surface properties inherent to the 7075-T6 alloy with alclad coating. The solicitation, issued under the NAICS code 331315 for aluminum rolling, is classified as a subcontract and was posted on July 28, 2026, with responses due by August 4, 2026. The contracting activity falls under the Department of Defense through the agency name CONSTRUCTION & EQUIPMENT MRO SVC I, though no specific point of contact or place of performance details are provided. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline to be considered for award.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 331315
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1932
The contract pertains to the procurement of one unit of BAR, METAL with NSN 9510-01-610-9320 under solicitation SPE8E4-26-T-1932, issued by the Defense Logistics Agency. Delivery is required within five days of contract award, FOB destination, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless superseded by more stringent DLA Technical and Quality Requirements, which take precedence. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The item is designated for delivery to a U.S. military address in FPO AP 96306-0001, with a secondary freight shipping address in Japan, and must be shipped as a RDD 999/NMCS shipment under DLAD PROC NOTES C19 and C20. The required delivery date is January 21, 2026, and the contract incorporates all referenced DLA Master List requirements as of the solicitation issuance date. The technical and quality requirements referenced are binding and sourced exclusively from the DLA Master List of Technical and Quality Requirements available online, with CDRL-METALSCERT and DD Form 1423s applicable for certification and data submission. The unit of issue is each (EA), and the total price is $1.00. Government identification must be removed from non-accepted supplies, and the contract is governed by DoD authorized units of issue. The point of contact is Pamela Duffey of DLA, and the solicitation was posted on July 28, 2026, with responses due by August 10, 2026. The NAICS code is 331315, indicating classification under primary metal manufacturing, and the contract is classified as federal procurement without set-aside designation.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 331315
New
DIBBS
SEAL KIT, DOOR
Solicitation # SPE8E5-26-T-3719
The contract is for a SEAL KIT, DOOR with NSN 5411015301009 and part number 16505513, supplied by BOH ENVIRONMENTAL, L.L.C., under solicitation SPE8E5-26-T-3719. One kit is required, delivered in a single unit of issue (KT), with fixed quantity and zero variance allowed. Delivery must be completed within five days, FOB origin, and inspection and acceptance occur at the destination. The item has a non-extendable shelf life of 12 months and is classified as a TYPE I (CODE H) item. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate container requirements, and packaging code U, with marking conforming to MIL-STD-129 and no special markings required. Palletization adheres to DLA packaging standards. The shipment must be dispatched via traceable means, excluding parcel post, to the designated government facility at Fort Riley, Kansas, with delivery scheduled for July 24, 2026. Technical and quality requirements are governed by the DLA Master List, and Covered Defense Information potentially applies. The contract includes government-specific identifiers and tracking codes for logistics and accountability purposes.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 331315
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-Q-0627
The contract specifies the procurement of 23 sheets of aluminum alloy metal, each 0.125 inches thick, 36 inches wide, and 144 inches long, weighing 64.80 pounds per sheet, with the NSN 9535-00-684-4551. The material must conform to SAE AMS4268 Revision B, SAE AMS-QQ-A-250/4B, and ASTM B666/B666M-20 standards, with a temper designation of T81. All shipments require a Certificate of Quality Compliance, including mill certification, with a copy provided to the DLA Troop Support Contracting Officer with every delivery. Each sheet must be permanently marked with the DLA contract delivery order number, NSN, specification number and revision, alloy grade and type, manufacturer’s name, heat and lot number, and exact dimensions using stamping or stenciling that is legible, waterproof, and noncontaminating; adhesive labels are permitted for small-diameter bars, tubes, and shapes. Sheets must be supplied in whole foot lengths only. Packaging must comply with ASTM B660-23 Level A and MIL-STD-2073-1E, including robust four-corner and full-edge protection, fiberboard or better top and bottom coverage, and adherence to PREP FOR DELIVERY code ZZ. Markings must also include both units of measure when applicable and conform to MIL-STD-129. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from the QSLD requirement constitutes an exception that must be clearly stated. Products not sourced through an approved QSLD distributor are considered unauthorized substitutions and may result in criminal penalties. Compliance with the QSL program waives the need for government inspection, including COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 requirements. The contract mandates firm fixed pricing with no tolerance for quantity variance, delivery within 90 days after order date, and destination point inspection and acceptance. The material will be shipped to the DLA Distribution Depot in Tinker AFB, Oklahoma, with packaging and transport governed by DLA-specific procedures. The solicitation was issued under SPE8E9-26-Q-0627 with a response deadline
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 331315
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-Q-0630
The contract specifies the procurement of aluminum metal sheets with precise technical and quality requirements, including material specifications of Alclad 7075-T6 with 0.0016 inch cladding on both sides, 0.040 inch thickness, 36 inch width, and 144 inch length, weighing approximately 20.95 pounds per sheet. All sheets must conform exactly to the stated dimensions with no tolerance for test coupons, and must be supplied in whole-foot lengths only. A Certificate of Quality Compliance, issued by the mill, is mandatory for every shipment and must be submitted to both the customer and the DLA Troop Support Contracting Officer. Each unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and dimensions using stamping or stenciling methods that are legible, waterproof, non-contaminating, and durable. Adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches nominal OD, with tags acceptable for wire. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including robust corner and edge protection, full fiberboard coverage top and bottom, and marking in accordance with MIL-STD-129, with dual-unit quantity labeling where applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any deviation from this requirement must be explicitly declared. Non-compliance with QSLD rules constitutes an unauthorized substitution and may trigger criminal penalties. This solicitation waives government inspection requirements for approved QSLD suppliers, relying instead on mill certifications and compliance with referenced standards including SAE AMS4049N, ASTM B666/B666M-20, and ASTM B660-23. Material must be delivered within 55 days of award, with firm fixed pricing and zero quantity variance permitted. Inspection and acceptance occur at destination, with FOB origin terms. Two separate line items total 70 sheets, destined for Tinker AFB, OK and San Diego, CA, with a required ship date of July 9, 2026. All documentation, including Certificates of Quality Compliance and marking details, must align strictly with the referenced Technical Data Package and DLA Master List of Technical and Quality Requirements.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 331315
New
DIBBS
SEAL KIT, DOOR
Solicitation # SPE8E5-26-T-3724
The contract pertains to the procurement of a SEAL KIT, DOOR with NSN 5411-01-530-0999, requiring the delivery of one kit under Purchase Request 7017622979. The item is classified as a TYPE I (CODE H) shelf-life item with a non-extendable shelf life of 12 months, and it is subject to DLA packaging and technical requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements. Delivery must be completed within five days of contract award, FOB destination, with no variance allowed in quantity, and inspection and acceptance are to occur at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific marking instructions, no special marking, and palletization adhering to DLA standards. The item is not hazardous, and shipment must be made via traceable means excluding parcel post, destined for Fort Riley, Kansas. The contract is part of solicitation SPE8E5-26-T-3724, with a response deadline of August 10, 2026, and the required delivery date is July 24, 2026. The primary point of contact is Don Trachtman of the Defense Logistics Agency, and the acquisition falls under NAICS code 331315.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 331315
New
DIBBS
Supply of MIL-SPEC Aluminum Sheet (2024-T3-BARE)The contract requires the manufacture and delivery of 312 linear feet of aluminum sheeting conforming to AMS-QQ-A-250/4 specification, grade 2024-T3-BARE, with a thickness of 0.032 inches, width of 48 inches, and length of 12 feet per piece. All material must originate from a single heat lot to ensure uniform chemical and mechanical properties, with full traceability documentation provided for every batch. Comprehensive certification, including material test reports and heat lot identification, must accompany the shipment to confirm compliance with military specifications. The materials are intended for use in defense applications requiring high strength and durability, and strict adherence to the specified alloy and temper is mandatory. The solicitation, titled Supply of MIL-SPEC Aluminum Sheet (2024-T3-BARE), is issued as a subcontract under the Department of Defense through DLA Fleet Readiness Southwest, with the NAICS code 331315 indicating fabrication of rolled metal shapes. The response deadline is August 3, 2026, and all submissions must be completed by that date. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS portal. No set-aside provisions apply, and the contract is open to qualified suppliers capable of meeting exacting aerospace-grade material standards with full documentation and lot traceability.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 331315
New
DIBBS
ALUM SH 2024-T3-BARE-.
Solicitation # SPEFA1-26-Q-0095
The contract specifies the procurement of 312 linear feet of aluminum sheeting compliant with AMS-QQ-A-250/4 (2024-T3-BARE), measuring 0.032 inches in thickness, 48 inches in width, and 12 feet in length, with PVC coating on both sides. All material must originate from the same heat lot and include required certifications upon delivery. The item is to be packaged per ASTM D3951, marked and labeled according to MIL-STD-129, and palletized in accordance with RP001 DLA packaging requirements. The unit of issue is linear feet, with no variance allowed in quantity—exactly 312 feet must be delivered. The pricing is firm fixed, with inspection and acceptance occurring at the destination. Delivery is required within seven calendar days after award, and the shipment must be sent to the designated DLA receiving facility at Naval Base Coronado in San Diego, California. The government-provided delivery target date is September 23, 2026, under solicitation SPEFA1-26-Q-0095, with the purchaser identified as DLA Fleet Readiness Southwest. All technical and quality standards mandated by the DLA Master List supersede any conflicting ASTM requirements.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 331315
New
DIBBS
SEAL KIT, DOOR
Solicitation # SPE8E5-26-T-3690
The contract specifies the procurement of a SEAL KIT, DOOR with NSN 5411015301005, supplied as a single kit per unit of issue (KT), with a total quantity of three units required under separate CLINs. The item is classified as a TYPE I (CODE H) with a strict 12-month non-extendable shelf life, and the manufacturer’s date must be provided. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and containment standards, while marking follows MIL-STD-129 with no special codes. Palletization adheres to DLA’s procurement requirements, and shipment must be delivered FOB origin within five days via traceable freight methods, excluding parcel post, to the designated military address at Fort Riley, Kansas. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. The item is covered under defense information protocols and incorporates technical and quality standards referenced from the DLA Master List. The required delivery date is July 24, 2026, and the contract is issued under solicitation SPE8E5-26-T-3690 by the Defense Logistics Agency for the Department of Defense.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-08SJ
The contract is for the procurement of 50 units of a machine bolt with part number 803-1385637-02X-23 and NSN 5306-01-482-4720, issued under solicitation SPE4A6-26-T-08SJ by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days after award, with responses due by July 29, 2026. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting any disclosure or transfer of technical data to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign nationals within the United States. Only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and approved the DLA questionnaire, may access this controlled data. The contract mandates compliance with CMMC Level 2 cybersecurity requirements and ISO 9001:2015 quality standards, reflecting the high-security and quality assurance protocols for defense-related manufacturing. The place of performance is designated as New Cumberland, Pennsylvania, with Priscilla Holmes as the primary point of contact.
Nonferrous Forging

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLOSE TOLERANC
Solicitation # SPE4A6-26-T-10TL
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-11BG
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Domestic Logistics & Delivery CoordinationThe contract requires coordinated execution of final delivery for cable assemblies to multiple domestic military stock locations, with strict adherence to packaging verification standards and shipping instruction compliance. All activities must ensure that cable assemblies are handled, packaged, and transported according to military requirements to guarantee readiness and operational suitability upon arrival at designated depots across CONUS. The solicitation is a small business set-aside under the SBA program, exclusively open to total small businesses as defined by FAR 19.5, with the NAICS code 484220 classifying it under truck transportation of specialized freight. The contract is managed by the ASC Commodities Division under the Department of Defense and is issued as a subcontract. Proposals must be submitted by the deadline of August 11, 2026, with no specified point of contact or place of performance details provided beyond the domestic scope. All work must align with DLA’s logistical and compliance frameworks to support military supply chain integrity.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541330
New
DIBBS
Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.
Engineering Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
MIL-STD-129 Marking and Bar-CodingThe contract requires the application of permanent, compliant markings and barcodes in strict adherence to MIL-STD-129 specifications for military tracking and logistics. This includes using approved symbology, correct label placement, and precise data formatting to ensure seamless integration with Department of Defense inventory and supply systems. All work must meet rigorous military standards for durability, readability, and accuracy under operational conditions. The contract is classified as a subcontract under NAICS code 561910, issued by the ASC Commodities Division of the Department of Defense, with performance required at Hill AFB, Utah, 84056-5734. The solicitation was posted on July 29, 2026, and responses are due by August 6, 2026. Interested parties must submit their proposals through the DIBBS platform using the provided link to be considered for award.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Defense-Compliant Packaging and PalletizationThe contract requires precise packaging and palletization of retaining plates in full compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all components are securely cushioned, wrapped, and palletized to meet military logistics specifications. This subcontract emphasizes rigorous adherence to defense-grade procedures for protection, handling, and transportation, with all materials and methods validated to prevent damage during transit and storage in operational environments. The work must be executed to guarantee readiness for immediate deployment and integration into the DoD supply chain. Performance is mandated at Hill Air Force Base, Utah, with a response deadline of August 6, 2026, and the solicitation falls under NAICS code 561910 for other support activities for warehousing and storage. The contracting entity is the ASC Commodities Division under the Department of Defense, and while no set-aside type is specified, participation is open to qualified subcontractors capable of delivering military-compliant packaging solutions. All work must be completed within the specified timeline to support ongoing defense logistics requirements, and full compliance with the referenced standards is non-negotiable.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339999
New
DIBBS
Military-Grade Preservation and Protective Coating ApplicationThis contract requires the application of protective lubricants and preservatives to retaining plates in strict accordance with MIL-DTL-197M specifications, ensuring military-grade corrosion resistance and long-term preservation. The work encompasses the careful selection of approved compounds, adherence to standardized application processes, and thorough documentation of all procedures and material usage to maintain compliance and traceability. All activities must be performed to meet the stringent quality and operational requirements established by the Department of Defense for defense-related components. Performance of this subcontract is designated for Hill Air Force Base, Utah, with a firm response deadline of August 6, 2026. The contract falls under NAICS code 339999 for other miscellaneous manufacturing and is issued by the ASC Commodities Division under the Department of Defense. While no specific set-aside provisions are outlined, bidders must be prepared to demonstrate capability in military preservation standards, proper handling of classified or controlled materials if applicable, and the ability to provide complete process documentation as required by the specification. Participation is limited to qualified subcontractors capable of meeting the technical and administrative demands of defense-grade component preservation.
All Other Miscellaneous Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332991
New
DIBBS
Precision Machining of Retaining Plate (Bearing Component)The contract calls for the manufacture of 11 retaining plates with part number 951B155-1 and NSN 3110-01-004-2387, to be produced in accordance with military specifications for integration into bearing assemblies. Although classified as a commercial item, the product must fully comply with defense standards to ensure operational reliability and compatibility within military systems. The work is being procured as a subcontract under the NAICS code 332991, indicating specialized machinery manufacturing, and is intended for performance at Hill Air Force Base with ZIP code 84056-5734. The solicitation was posted on July 29, 2026, with a response deadline set for August 6, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The procurement is conducted via the DIBBS platform, and while no specific set-aside program is designated, the requirement reflects a strategic need for precision-engineered components supporting critical defense equipment.
Ball and Roller Bearing Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance Support (NIST SP 800-171)The contract seeks cybersecurity compliance support to achieve NIST SP 800-171 adherence for the protection of Controlled Unclassified Information under DFARS 252.204-7012 requirements. The scope includes developing a System Security Plan, creating and maintaining a Plan of Actions and Milestones, and ensuring full audit readiness through implementation of technical and administrative controls aligned with the NIST framework. This support is critical for safeguarding CUI handled by the contractor and must be delivered to meet Defense Federal Acquisition Regulation Supplement mandates. The work is classified as a subcontract under NAICS code 541512 and is being managed by the ASC Commodities Division within the Department of Defense. Performance is required to occur at Portsmouth, New Hampshire, with a response deadline of August 6, 2026, and the solicitation was posted on July 29, 2026. The contractor must possess demonstrated expertise in federal cybersecurity compliance, specifically in NIST 800-171 implementation, and be prepared to deliver documentation and operational controls that withstand rigorous defense audits. There is no specified set-aside classification for this opportunity.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 488310
New
DIBBS
Logistics and Transportation Provider (Sea Shipment)The contract awards a subcontract for the sea transportation of packaged bearings under strict Defense Federal Acquisition Regulation Supplement (DFARS) 252.247-7023 requirements, ensuring full compliance with U.S. Department of Defense standards for international shipping. All shipments must adhere to MIL-STD-129 marking protocols for uniform identification and packaging, and the contractor is required to fully integrate with the Wide Area WorkFlow (WAWF) system to facilitate accurate and timely documentation, invoicing, and supply chain tracking. Transportation must be coordinated from the designated port of origin to Portsmouth, New Hampshire with precise adherence to delivery timelines and regulatory compliance throughout the logistics chain. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026, targeting experienced logistics providers capable of handling defense-related maritime shipments. The North American Industry Classification System code 488310 identifies the scope as support activities for water transportation, emphasizing specialized freight handling capabilities. This subcontract falls under the ASC Commodities Division of the Department of Defense, and all performance obligations are tied to the Portsmouth delivery location, requiring the contractor to maintain end-to-end visibility, documentation integrity, and regulatory compliance for defense-critical components.
Port and Harbor Operations

POSTED

1 day ago

DEADLINE

in 6 days
View Details