Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Inspection and Acceptance Support (Origin Inspection)

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires comprehensive support for government inspection activities conducted at the origin of supply, ensuring full compliance with U.S. Department of Defense standards. The scope includes managing all necessary documentation, generating and validating test reports, and providing on-site technical assistance to Contracting Officer’s Representative and Contracting Officer’s Technical Representative personnel during inspections. The work must align with the NAICS code 541340, indicating specialized professional, scientific, and technical services related to engineering and inspection. The subcontractor is expected to deliver seamless coordination between suppliers and U.S. government representatives, ensuring that all contractual requirements are met prior to shipment. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and is issued under the ASC SUPPLIER OPER AE AND AF DIV, which operates within the Department of Defense, focusing on supplier oversight and quality assurance for defense-related procurements.

General Info

Provide on-site inspection support and compliance documentation for DoD suppliers per NAICS 541340, ensuring readiness prior to shipment.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

541340 - Drafting ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Facilitating government inspection at origin, including documentation, test reports, and on-site support for COR/COTR representatives.

Similar Contracts

Same NAICS industry code

Bridge and Structural Engineering ServicesThe contract entails providing comprehensive design, analysis, and inspection support for bridge structures, with a focus on load ratings, rehabilitation planning, and construction-phase engineering services. The work is intended to ensure the structural integrity and safety of bridges through technical evaluations and engineering oversight during all phases of project development and implementation. This is a subcontract opportunity under NAICS code 541340, posted by the Florida Department of Agriculture and Consumer Services with a response deadline of September 15, 2026. The place of performance and specific location details are not specified, but the services are expected to support infrastructure initiatives within Florida. Interested parties must submit proposals before the deadline to be considered for participation in this engineering services contract.

Department of Agriculture and Consumer Services

POSTED

DEADLINE

in about 2 months

Quality Inspection and Acceptance SupportThe contract seeks quality inspection and acceptance support for military components, requiring adherence to MIL-STD-1916 or ASQ H1331 standards for both first-article and lot acceptance inspections. All inspections must include comprehensive documentation and timely reporting of non-conformances, ensuring full traceability and compliance with defense quality protocols. The work is tied to a subcontract under NAICS code 541340, which pertains to engineering services, and the performance location is set at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, with the contracting activity managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. No set-aside designation is specified, and all interested parties must meet the technical and procedural requirements outlined in the referenced inspection standards.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Technical Documentation & Drawing SupportThe contract requires the preparation and validation of technical drawings, specifications, and source approval packages to support VECPs, ensuring strict adherence to the DLA Master List and configuration control standards. All deliverables must align with established technical and regulatory requirements to maintain accurate and controlled documentation throughout the lifecycle of defense-related components. The work is scoped to support supply chain integrity and compliance within the Department of Defense, focusing on precise technical documentation that enables authorized sourcing and parts substitution. This subcontract opportunity, classified under NAICS code 541340, is posted by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense and is open for response until August 7, 2026. Participation is not subject to a specific set-aside designation, and performance location details are not specified. Interested parties must submit proposals through the DIBBS portal by the stated deadline to be considered for award, with successful offerors expected to deliver high-quality, compliant documentation that supports critical defense logistics and configuration management processes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Quality Inspection and Acceptance SupportThis contract seeks a small business subcontractor to provide quality inspection and acceptance support in accordance with MIL-STD-1916 and ASQ H1331 standards, focusing on zero non-conformance sampling methods to ensure product integrity and compliance. The work will be performed at DLA New Cumberland, where the contractor will conduct destination verification to confirm accurate receipt and condition of delivered items, ensuring alignment with contractual and military quality expectations. The effort is critical to maintaining high standards in defense logistics and requires expertise in statistical sampling, inspection procedures, and documentation practices that meet federal and military specifications. The solicitation is set aside exclusively for total small businesses as defined by the SBA under FAR 19.5, with the NAICS code 541340 indicating classification under management, scientific, and technical consulting services. Responses are due by August 10, 2026, with the opportunity posted on July 28, 2026. The work location is clearly identified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and the contracting agency is the Department of Defense under LAND SUPPLIER OPNS ENGINES. The contract is managed through the DIBBS system and requires the proposer to demonstrate capability in executing zero-defect quality processes within a government supply chain environment.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

DVBE/WBE/MBE Sub-Consultant and Supplier ParticipationThe contract requires the provision of inspection, technical, or documentation services through certified Disadvantaged, Minority, Women, or Disabled Veteran Business Enterprises to fulfill a 3% DVBE participation goal. This subcontract opportunity is issued by the Pomona Unified School District in California and is tied to a specific project location in Pomona with a ZIP code of 91766. The solicitation is classified under NAICS code 541340, which corresponds to architectural and engineering services, indicating that the work involves professional technical expertise. Interested parties must respond by the deadline of August 11, 2026, at 5:00 PM to be considered, and all subcontractors must be properly certified to qualify toward the participation requirement. The contract does not specify a set-aside type, but its structure emphasizes inclusion and compliance with diversity procurement goals. All performance must be delivered in alignment with the district’s commitment to equitable vendor participation, and interested contractors may access additional details through the provided online portal.

Pomona Unified School District

POSTED

DEADLINE

Specialized Structural Inspection ServicesThe contract requires full-time on-site special inspections for structural components during school construction in Pomona, California, with a focus on welding, concrete placement, and pile-driving activities. All work must strictly adhere to DSA regulations, Title 24 California Code of Regulations, and the approved construction plans to ensure safety and compliance. The inspections are essential to verify that structural elements are installed and fabricated according to engineering specifications and state-mandated standards. This is a subcontract under NAICS code 541340, issued by the Pomona Unified School District with a response deadline of August 11, 2026. The services are to be performed entirely on-site at the construction location in Pomona with a ZIP code of 91766. The contract mandates continuous physical presence during critical construction phases, and the successful bidder must demonstrate expertise in specialized structural inspection protocols relevant to educational facility construction.

Pomona Unified School District

POSTED

DEADLINE

VLF and Medium Voltage Cable Testing ServicesThe contract requires the performance of Very Low Frequency (VLF) testing on medium voltage power lines to evaluate insulation integrity, encompassing full-cycle services from initial test planning and field execution to real-time leakage current monitoring and detailed defect analysis. All testing activities must be conducted in accordance with industry standards, with findings documented through comprehensive digital reports that include diagnostic insights and actionable recommendations for maintenance or repair. The work is to be performed at a location with a zip code of 15108, and the contractor is expected to deliver accurate, timely, and technically sound results to support the reliability of the medium voltage infrastructure. This is a subcontract under a Small Business Set Aside designation, classified under NAICS code 541340, indicating it is intended for small business concerns. The opportunity was posted on July 28, 2026, with a response deadline of August 6, 2026, and is managed by the Department of Defense under the office identifier FA6712 911 Aw Lgc. The contract places emphasis on technical expertise in VLF testing methodologies, data interpretation, and reporting precision, with no specific point of contact provided, suggesting proposals must be self-contained and fully responsive to the stated requirements without additional clarification.

FA6712 911 Aw Lgc

POSTED

DEADLINE

Tree Care and Shrubbery MaintenanceThe contract titled Tree Care and Shrubbery Maintenance involves the comprehensive care of trees and shrubs including pruning, trimming, shaping, and health monitoring with specific attention to dead limb removal and seasonal maintenance to ensure safety and aesthetic standards. Services are required to be performed continuously throughout the year to support the ongoing landscape integrity and hazard mitigation at the designated location in Marathon, Florida, with a ZIP code of 33050. This is a subcontract classified under NAICS code 541340 and set aside exclusively for small businesses under the Small Business Administration program, meaning only qualified small business entities are eligible to respond. The opportunity was posted on July 28, 2026, with a response deadline of August 12, 2026, at 3:00 PM, and is managed by the Department of Homeland Security through its Base MIAMI office. All work must be carried out in accordance with industry best practices for arboriculture and landscape management without the provision of additional supporting documentation beyond what is required for eligibility verification.

Base MIAMI(00028)

POSTED

DEADLINE

Simulation, Test, and Training System DevelopmentThe contract seeks development of advanced simulation environments, test beds, and training systems specifically tailored for naval combat platforms, with a focus on enabling comprehensive verification, validation, and human-in-the-loop testing. The work requires the integration of high-fidelity modeling and real-time simulation capabilities to support the evaluation of combat system performance under realistic operational conditions, ensuring that personnel are effectively trained and systems are thoroughly validated prior to deployment. The technical scope emphasizes interoperability, scalability, and the ability to replicate complex maritime threat environments for use in both lab and field settings. This subcontract is issued by the Naval Surface Warfare Center Dahlgren Division under the Department of Defense, with performance expected to be centered in Dahlgren, Virginia, 22448. The solicitation was posted on July 28, 2026, and responses are due by August 12, 2026, with a North American Industry Classification System code of 541340, indicating it relates to computer systems design services. There is no set-aside designation specified, and the contract does not include identified point of contact details, requiring potential offerors to review the full posting on SAM.gov for submission guidelines and additional requirements.

POSTED

DEADLINE

Quality Control & Compliance CertificationThe contract requires the implementation of comprehensive quality control procedures to ensure all materials and installations meet Canadian Standards Association (CSA) requirements. This includes conducting regular inspections, reviewing technical submittals, and providing formal certification of compliance for all work performed under the scope. The focus is on maintaining adherence to established engineering and safety standards throughout the project lifecycle, with particular emphasis on verification and documentation to validate conformity. The contract is classified as a subcontract under NAICS code 541340 and is issued by the Government of Canada through the Department of the Environment (ECCC). Offers must be submitted by August 21, 2026, and the work is to be performed in Ottawa. While the solicitation number and point of contact are not provided, the opportunity is posted through Canada Buys, and performance is expected to align with federal standards for environmental and infrastructure compliance.

Department of the Environment (ECCC )

POSTED

DEADLINE

Load Balance & Compliance ReportingThe contract titled Load Balance & Compliance Reporting requires the contractor to perform detailed electrical load analysis across designated systems and deliver comprehensive load balance reports along with official compliance certificates necessary for final acceptance. This work is essential to ensure that electrical systems meet regulatory standards and operational requirements as defined by the Government of Canada through the Department of the Environment ECCC. The deliverables must accurately reflect load distributions and demonstrate adherence to applicable codes and guidelines to support the certification process for project approval. This subcontract is solicited under NAICS code 541340 which corresponds to engineering services and is issued by the Government of Canada with performance required in Ottawa. It was posted on July 28 2026 with a response deadline of August 21 2026 and is open to qualified subcontractors capable of delivering technically accurate and compliant electrical analysis and documentation. The award will support the overall infrastructure integrity and regulatory compliance objectives of the federal agency with all deliverables subjected to rigorous validation prior to final acceptance.

Department of the Environment (ECCC )

POSTED

DEADLINE

Electrical Testing, Commissioning, and InspectionThe contract requires performance of electrical testing, commissioning, and inspection services to verify system performance and support government acceptance, with work to be conducted at various locations across Michigan. The work falls under NAICS code 541340, indicating it is classified as engineering services, and is structured as a subcontract. The solicitation was posted on July 28, 2026, with a firm response deadline of September 2, 2026, at 6:00 PM. The contracting agency is DTMB, specifically under the Michigan branch, though no specific office address or point of contact details are provided. All performance activities are expected to occur at unspecified sites within the state, and the contract does not indicate a set-aside type or additional demographic or small business preferences. Submission must be made through the designated Michigan government portal linked in the contract documentation.

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

PANEL, STRUCTURAL, AI

Solicitation # SPE4A7-26-Q-0920

The contract is for one structural panel, item number 1560-01-196-4405, under solicitation SPE4A7-26-Q-0920, with a delivery deadline of 440 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions use the revision active on the RFP issue date unless a later amendment supersedes it. The item is subject to multiple DLA-specific requirements including packaging, inspection and acceptance at origin, physical identification and marking of the bare item, measurement and test equipment standards, and configuration change management through engineering change proposals. Importantly, the item is exempt from item unique identification per service customer request, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, regardless of location, and only contractors with approved JCP certification, completed training, and DLA clearance may access such data. All applicable DFARS clauses, including those governing export control and contractor responsibilities, are in effect. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with NyA Currie as the primary point of contact.

POSTED

about 8 hours ago

DEADLINE

DUCT ASSEMBLY, AIR COND

Solicitation # SPE4A7-26-Q-0921

The contract is for the procurement of four duct assemblies for aircraft air conditioning and heating systems, identified by NSN 1660-01-138-4412, with a delivery requirement within 300 days after award. The solicitation number is SPE4A7-26-Q-0921, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with a response deadline of August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and been approved by DLA. Packaging, inspection at origin, removal of government identification from non-accepted items, and calibration of test equipment are governed by specific DLA requirements, and all delivered items must adhere to rigorous quality standards applicable to both manufacturers and non-manufacturers.

Sheet Metal Work Manufacturing

POSTED

about 8 hours ago

DEADLINE

COUPLING, CLAMP, GROO

Solicitation # SPE4A7-26-T-600H

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-600F

The contract is for 493 blind rivets identified by NSN 5320-01-467-9293 and part number MS90353S0506D, governed by the technical standards NASM90353 Revision 4 and NASM81177 Revision 2, with all hardware manufactured after the solicitation date required to comply with the current revisions of these standards. The item is classified as a critical application and must meet the DLA Master List of Technical and Quality Requirements, which override any referenced packaging standards like ASTM D3951. Inspection and acceptance occur at origin under RQ009, with sampling conducted per MIL-STD-1916 or ASQ H1331 Table 1 using zero defect acceptance unless otherwise specified; unspecified attributes are treated as major with an AQL of 1.0. Packaging must follow MIL-STD-129 and DLA Packaging Requirements RP001, including palletization guidelines, with no shelf life requirement and no need for Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The delivery is FOB origin with a strict 0% variance tolerance, due in 191 days by February 14, 2027, and must be shipped to Tinker AFB Oklahoma. The unit price is $493.00 per each, totaling a contract value of $243,049. The procurement is subject to Covered Defense Information provisions and follows DLA transportation notes C19 and C20.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE4A7-26-Q-0919

The contract specifies the procurement of a stuffing tube identified by NSN 5975-01-722-0867 and part number 630A007MT203D, with a firm fixed price and no variance allowed in quantity—exactly one unit is required. Delivery is due 155 days after the award date, with FOB origin terms and inspection and acceptance occurring at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions including packaging per RP001, removal of government identification from non-accepted items per RQ011, and bare item marking per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified using specified levels or AQLs. Packaging must comply with MIL-STD-129 labeling and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if hazardous under FED-STD-313, with DLA requirements taking precedence. Palletization must adhere to RP001 and commercial packaging standards. The item must be shipped via the fastest traceable means, explicitly prohibiting parcel post, to the designated government freight address in Port Hueneme, California, with shipment details including RDD 777 and TCN N4242052261530. The government use section includes internal tracking codes, and the required delivery date is May 22, 2026.

POSTED

about 8 hours ago

DEADLINE

CONTROL ASSEMBLY, PU

Solicitation # SPE4A7-26-Q-0929

The contract pertains to the procurement of seven units of a cable push-pull engine speed control assembly identified by NSN 2995-01-129-3917, with a delivery requirement within 200 days after award. The solicitation, numbered SPE4A7-26-Q-0929, was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the version in effect on the solicitation issue date. The item is subject to strict export control under either ITAR or EAR, prohibiting any transfer of associated technical data to foreign persons without prior authorization from the Department of State or Commerce, including disclosures to foreign national employees within the United States. Access to this controlled data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program credential, have completed mandatory training on handling export-controlled technical data, and have submitted the required DLA questionnaire. Packaging must adhere to DLA procurement standards, and the contracting organization emphasizes cybersecurity compliance through CMMC Level 2 certification for third-party assessors. The primary point of contact for inquiries is Rekisha Burton, reachable via phone or email provided in the contract data.

POSTED

about 8 hours ago

DEADLINE

STIFFENER, AIRCRAFT

Solicitation # SPE4A7-26-Q-0888

The contract pertains to the procurement of four aircraft stiffeners identified by NSN 1560-01-467-5640, with a delivery requirement of 221 days after award. Technical and quality specifications are governed by referenced requirements from the DLA Master List, including packaging standards, tailored quality controls, inspection protocols at the manufacturer’s facility, and procedures for removing government identification from non-accepted items. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program who have completed mandatory DLA training and questionnaire approvals. The solicitation, issued under number SPE4A7-26-Q-0888, was posted on July 29, 2026, with responses due by August 8, 2026. The contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with April Reed as the primary point of contact.

POSTED

about 8 hours ago

DEADLINE

SEAL, SIDE COWL

Solicitation # SPE4A7-26-Q-0885

The contract item is a SEAL, SIDE COWL with NSN/Part Number 1560-01-084-9350, for a quantity of 12 units, under Purchase Request 7017272093, with delivery required within 112 days after award. The solicitation number is SPE4A7-26-Q-0885, posted on July 29, 2026, with responses due by August 8, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure to foreign persons, regardless of location, constitutes an export requiring prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data. Access is restricted to contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from DLA to handle such data. Primary point of contact is April Reed, reachable via email and phone provided.

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE4A7-26-Q-0932

The contract specifies the procurement of 10 stuffing tubes with NSN 5975-99-676-3468 under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required 145 days after award date, with inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E using preservation method 10, dry preservation, and unit container D3, and marked according to MIL-STD-129 without special marking codes. Packaging and preservation are subject to DLA’s RP001 requirements and explicitly prohibit mercury or mercury compounds. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract references technical and quality requirements identified by R and I numbers from the DLA Master List, and all packaging, marking, and preservation instructions must align with these standards. Transportation directions specify delivery to USNS EARL WARREN via parcel post and freight shipping addresses, with shipping details governed by DLAD PROC NOTES C19 and C20. The vendor must use VSM for U.S. shipments and comply with the provided TCN, RDD, project, and signature codes. The government’s material need date is July 17, 2026, and the contract solicitation number is SPE4A7-26-Q-0932.

POSTED

about 8 hours ago

DEADLINE

SPACER, SPECIAL SHAPED

Solicitation # SPE4A7-26-T-599N

The contract is for 56 special-shaped spacers identified by NSN 5365-01-588-4009 under solicitation SPE4A7-26-T-599N, with a delivery requirement of 171 days after order. The item is classified as a commercial item, allowing the use of a Certificate of Conformance unless restricted by a Quality Assurance Letter of Instruction. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in the sample lot unless otherwise stated. The contractor must comply with DLA packaging requirements and technical quality specifications referenced in the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. The item is subject to export control under ITAR or EAR, restricting technical data sharing with foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data requires JCP certification, completion of DOD export training, and DLA approval. The contractor must also maintain CMMC Level 2 certification through a certified third-party assessment organization. Physical identification of the product must meet specified marking requirements, and covered defense information protocols are enforced. The contract is managed by the Department of Defense through the ASC Supplier Operations AE and AF Division, with performance located in New Cumberland, PA, and primary point of contact is Tamera Greene.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

MARKER STRIP, TERMIN

Solicitation # SPE4A7-26-T-599P

The contract pertains to the procurement of 12 units of a marker strip for terminal boards with NSN 5940-01-531-7249, issued under solicitation SPE4A7-26-T-599P by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, and requires delivery within 171 days after order. Compliance is governed by DLA Packaging Requirements for Procurement and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampling unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only to determine sample size, not acceptance criteria. Manufacturer inspection methods may be chosen at their discretion unless contractually directed. The item must conform to technical data specified in A3278582-004 and is to be delivered to New Cumberland, PA, with Lockheed Martin as the CAGE code 80063 performer. All government identification must be removed from non-accepted supplies, and primary point of contact is Lexus Henry, reachable via email and phone provided.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

STIFFENER, AIRCRAFT

Solicitation # SPE4A7-26-Q-0924

The contract is for four aircraft stiffeners identified by NSN 1560-01-467-5640 under solicitation SPE4A7-26-Q-0924, with a delivery requirement of 221 days after order. The technical and quality requirements for this item are governed by specific DLA master list codes including RP001 for packaging, RQ001 for tailored quality standards for manufacturers and non-manufacturers, RQ009 for inspection and acceptance at origin, RQ011 for removal of government identification from non-accepted supplies, and RQ032 for export control of technical data. The technical data associated with this item is subject to export regulations under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons regardless of location, including foreign national employees and subsidiaries of U.S. companies, with DFARS 252.225-7048 fully applicable. Access to this controlled data is restricted to contractors who hold a valid U.S./Canada Joint Certification Program certification, have completed mandatory DOD export-controlled data training and the DLA questionnaire, and have received formal approval from the DLA authority. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the contracting office is the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with April Reed designated as the primary point of contact.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE