Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONTROL ASSEMBLY, PU

Active
SPE4A7-26-Q-0929Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of seven units of a cable push-pull engine speed control assembly identified by NSN 2995-01-129-3917, with a delivery requirement within 200 days after award. The solicitation, numbered SPE4A7-26-Q-0929, was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the version in effect on the solicitation issue date. The item is subject to strict export control under either ITAR or EAR, prohibiting any transfer of associated technical data to foreign persons without prior authorization from the Department of State or Commerce, including disclosures to foreign national employees within the United States. Access to this controlled data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program credential, have completed mandatory training on handling export-controlled technical data, and have submitted the required DLA questionnaire. Packaging must adhere to DLA procurement standards, and the contracting organization emphasizes cybersecurity compliance through CMMC Level 2 certification for third-party assessors. The primary point of contact for inquiries is Rekisha Burton, reachable via phone or email provided in the contract data.

General Info

Procure seven cable push-pull speed controls, deliver in 200 days, ITAR/EAR controlled, CMMC Level 2 required.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

335314 - Relay and Industrial Control ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Rekisha Burton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE, PUSH-PULL ENGINE SPEED CONTROL
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2995-01-129-3917 Quantity: 7 EA Purchase Request: 7017148024QTY: 7 Delivery: 200 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-26-T-357D
ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
Federal
Sources Sought SEL-2488
Solicitation # N6274226RSEL2488
The Naval Facilities Engineering Systems Command, Pacific is seeking information on alternative sources for a transformer protection relay that meets the exact performance specifications of the SEL-2488 manufactured by Schweitzer Engineering Laboratories, as required for the Fiscal Year 2027 SIOP Project P-8026 at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam. The system demands a satellite-synchronized network clock capable of delivering precise, traceable time synchronization to all intelligent electronic devices in the substation, including protective relays, automation controllers, meters, and SCADA systems. The clock must distribute time through industry-standard protocols such as PTP, NTP, IRIG-B, and PPS, while continuously monitoring its own synchronization status, generating alarms for failures, and providing remote access to event logs and diagnostic data to ensure system integrity and support maintenance operations. Integration with existing substation automation and communication networks via Ethernet and standard protocols is essential. This notice is a market survey under FAR 15.201(e) to determine if other suppliers can match the required functionality and compatibility with the existing infrastructure, and it is not a request for proposals or a binding solicitation. Respondents must submit detailed technical data—excluding generic brochures—demonstrating how their product meets all specified performance criteria, including time distribution, monitoring, and integration capabilities. Submissions are due by 2:00 p.m. H.S.T. on July 30, 2026, and must be sent electronically to the designated point of contact. Any information provided becomes the property of the U.S. Government and will not be returned. The government reserves the right to disregard incomplete, unclear, or late submissions, and respondents bear full responsibility for the accuracy and completeness of their submissions and any associated costs.
Navfacsyscom Pacific

POSTED

about 13 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 335314
New
Federal
Sources Sought SEL-3555
Solicitation # N6274226RSEL3555
The Naval Facilities Engineering Systems Command, Pacific is conducting a market survey to identify alternative sources for a transformer protection relay with performance equivalent to the SEL-3555 manufactured by Schweitzer Engineering Laboratories. This effort supports Fiscal Year 2027 SIOP Project P-8026 at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam, Hawaii, which requires a real-time automation controller capable of substation automation, communications gateway functions, programmable logic and control, continuous data collection and monitoring with synchronized time-stamping, and robust cybersecurity features including encrypted communications and role-based access control. The system must integrate seamlessly with existing intelligent electronic devices, programmable logic controllers, HMIs, and SCADA systems while ensuring interoperability across multi-vendor equipment and enterprise networks. This notice is strictly for market research and is not a solicitation for proposals or bids. Interested parties must submit detailed technical data directly to Ms. Annette Tijerina no later than 2:00 p.m. H.S.T. on July 30, 2026, to demonstrate that their product meets all specified requirements. Company brochures will not be accepted, and submissions must be comprehensive enough to allow the Government to evaluate compatibility with current systems. All information provided becomes the property of the U.S. Government and will not be returned, and responses must be complete and specific to be considered. Late or vague submissions will be disregarded, and no binding contract will be formed as a result of this notice under FAR 15.201(e).
Navfacsyscom Pacific

POSTED

about 13 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 335314
New
Federal
Sources Sought for SEL-2440
Solicitation # N6274226RSEL2440
The Naval Facilities Engineering Systems Command, Pacific is seeking information on alternative sources for transformer protection relays that meet the performance standards of the SEL-2440 and SEL-587Z models manufactured by Schweitzer Engineering Laboratories, for use in the Fiscal Year 2027 SIOP Project P-8026 at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam, Hawaii. The intent is to evaluate whether other vendors can provide functionally equivalent products that satisfy the technical requirements without relying on the specific branded items. In addition to the relays, the requirement includes a discrete programmable automation controller capable of high-speed monitoring and control of substation equipment, with configurable digital I/O, support for bay control and equipment interlocking, integration with protective relays and SCADA systems via industry-standard protocols, and comprehensive event logging and sequencing capabilities for post-event analysis and system diagnostics. The controller must enable distributed automation through time-synchronized event recording and robust Ethernet and serial communications to ensure seamless coordination across the substation’s protection, control, and monitoring functions. This notice is strictly for market research and is not a solicitation for proposals or bids. Interested parties must submit detailed technical data by 2:00 p.m. H.S.T. on July 30, 2026, to Annette Tijerina at the provided email address, and submissions must not include company brochures. All information provided becomes the property of the U.S. Government and will not be returned, though proprietary or classified data will be handled appropriately. Responses that are incomplete, vague, or received after the deadline will be disregarded. Submission of information under this notice does not constitute an offer or create any binding obligation on the part of the Government, and respondents bear full responsibility for the accuracy and completeness of the data they provide. The North American Industry Classification System code associated with this effort is 335314, and the point of contact includes Annette Tijerina as the primary representative and Shaun Chow as a secondary point of contact.
Navfacsyscom Pacific

POSTED

about 13 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 335314
New
Federal
Sources Sought SEL2731
Solicitation # N6274226RSEL2731
The Naval Facilities Engineering Systems Command, Pacific is conducting a market survey to identify alternative sources for a transformer protection relay that meets the performance specifications of the SEL-2731 manufactured by Schweitzer Engineering Laboratories, as required for Fiscal Year 2027 SIOP Project P-8026 at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam, Hawaii. The solicitation specifically seeks industrial Ethernet switches capable of supporting reliable, secure, and synchronized communication across substation networks, including managed functions such as VLANs, RSTP, SNMP, user authentication, PTP transparent clocking, NTP, and comprehensive network monitoring with alarm generation. The switch must integrate seamlessly with existing substation automation and SCADA systems using industry-standard protocols to ensure robust protection, control, and diagnostic capabilities. This notice is strictly for market research and does not constitute a request for proposals, quotes, or bids. Respondents are required to submit detailed technical data demonstrating that their products meet all specified functionality and compatibility requirements, with company brochures explicitly excluded. All submissions must be sent electronically to Annette Tijerina no later than July 30, 2026, at 2:00 p.m. H.S.T., and any information provided becomes the property of the U.S. Government and will not be returned. Responses submitted after the deadline will be disregarded, and incomplete or vague submissions may be rejected. Participation is voluntary, and submission does not create any obligation or binding contract on the part of the Government. Proprietary and classified information will be handled in accordance with applicable regulations.
Navfacsyscom Pacific

POSTED

about 13 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 335314
New
Federal
Sources Sought SEL-351S-7
Solicitation # N6274226RSEL351S7
The Naval Facilities Engineering Systems Command, Pacific is seeking information on alternative sources for a transformer protection relay that meets the exact performance specifications of the SEL-351S-7 model from Schweitzer Engineering Laboratories, to support the Fiscal Year 2027 SIOP Project P-8026 at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam. The required relay must provide comprehensive feeder protection using phase, ground, and negative-sequence overcurrent elements with configurable directional settings, as well as integrated breaker control functions including failure protection, autoreclosing, synch-check capabilities, and trip circuit monitoring. It must also deliver detailed monitoring of three-phase currents, voltages, frequency, power, and power factor, along with fault location, metering, and power quality data. The system must include Sequential Events Recorder and oscillographic event reporting for post-event analysis, and feature front-panel control switches for breaker operations, relay status indications, and programmable functions. This notice is a market survey under FAR 15.201(e) and is not a request for proposals or an invitation to bid; responses will not form a binding contract. Interested parties must submit complete technical documentation via email to Annette Tijerina no later than 2:00 p.m. H.S.T. on July 30, 2026, detailing how their product meets or exceeds the specified requirements. Company brochures are not acceptable. Submissions must be thorough and precise, as incomplete or vague responses will be disregarded. All information provided becomes the property of the U.S. Government and will not be returned, though proprietary or classified data will be handled appropriately. The solicitation number is N6274226RSEL351S7, and inquiries can also be directed to Shaun Chow. The response deadline is strictly enforced, and late submissions will not be considered.
Navfacsyscom Pacific

POSTED

about 13 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 335314
New
Federal
Sources Sought SEL-2902
Solicitation # N6274226RSEL2902
The Naval Facilities Engineering Systems Command, Pacific is seeking information on alternative sources for a transformer protection relay that matches the performance specifications of the SEL-2902 manufactured by Schweitzer Engineering Laboratories, for use in the Fiscal Year 2027 SIOP Project P-8026 at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam, Hawaii. The requirement includes a custom RJ45 to DB-9 adapter panel designed to maintain compatibility with existing legacy serial communication infrastructure, allowing continued use of older cables, transceivers, and field wiring during system modernization. The adapter must support retrofit replacements of legacy communications processors and automation controllers without altering panel layouts or wiring, feature flexible mounting options including rack, surface, or DIN-rail configurations with adjustable depth, provide secure cable management for transceivers, and ensure seamless integration with existing SEL automation platforms to reduce downtime and retrofit costs. This notice serves strictly as a market survey and is not a solicitation for proposals or bids; responses are required to include detailed technical data on alternative products that meet or exceed the specified requirements, excluding company brochures. Submissions must be sent electronically to Annette Tijerina by 2:00 p.m. H.S.T. on July 30, 2026, and any information provided will become the property of the U.S. Government and will not be returned. Responses received after the deadline will not be considered, and incomplete or vague submissions may be disregarded. This effort aligns with FAR 15.201(e), which clarifies that responses are not offers and cannot form a binding contract. The solicitation number is N6274226RSEL2902, the NAICS code is 335314, and all communication should be directed to the designated point of contact, with additional support available from Shaun Chow.
Navfacsyscom Pacific

POSTED

about 13 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 335314
New
Federal
Sources Sought for SEL-587Z
Solicitation # N6274226RSEL587Z
The Naval Facilities Engineering Systems Command, Pacific is seeking information on alternative sources for a high-impedance differential relay with performance capabilities equivalent to the SEL-587Z manufactured by Schweitzer Engineering Laboratories, for use in the Fiscal Year 2027 SIOP Project P-8026 at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam, Hawaii. The required relay must provide high-speed protection for medium- and low-voltage switchgear buses, including reliable detection and isolation of internal bus faults while remaining stable during external faults and current transformer saturation. It must also deliver sensitive ground fault protection, continuous monitoring of differential zone currents and CT circuit integrity, comprehensive event logging via Sequential Events Recorder and alarm systems, and full integration with station automation systems using industry-standard communication protocols. This notice is a market survey under FAR 15.201(e) and is not an invitation to bid or a request for proposals. Responses must include detailed technical documentation demonstrating full compliance with the specified performance requirements; company brochures will not be accepted. Submissions must be sent electronically to Annette Tijerina by 2:00 p.m. H.S.T. on July 30, 2026, and any late submissions will be disregarded. All information provided becomes the property of the U.S. Government and will not be returned. The government reserves the right to reject any incomplete or ambiguous responses. Proprietary or classified data will be handled appropriately, but respondents bear full responsibility for the accuracy and completeness of their submissions and any associated costs. The contract opportunity falls under NAICS code 335314 and is being managed by NAVFAC Pacific at Joint Base Pearl Harbor-Hickam, Hawaii.
Navfacsyscom Pacific

POSTED

about 13 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 335314
New
Federal
Sources Sought for SEL-387L
Solicitation # N6274226RSEL387L
The Naval Facilities Engineering Systems Command, Pacific is seeking to identify alternative sources capable of supplying a transformer protection relay with performance capabilities equivalent to the SEL-387L manufactured by Schweitzer Engineering Laboratories for use in Fiscal Year 2027 SIOP PROJECT P-8026 at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam, Hawaii. The required relay must provide line differential protection with dual-slope elements and communications-assisted fault detection, comprehensive backup protection including phase, negative-sequence, and ground overcurrent elements, breaker failure protection, and configurable distance or permissive tripping functions. It must also include robust line monitoring capabilities for three-phase currents, voltages, frequency, power, and sequence quantities, along with fault location and disturbance analysis features. Additional requirements encompass detailed event reporting with sequential event recorders, oscillographic records, fault data logging, and communications diagnostics, as well as physically located panel controls for breaker operation, relay status, and programmable functions. This notice is a sources sought announcement, not a request for proposals or an invitation to bid, and is intended solely for market research to evaluate potential alternate suppliers. Respondents must submit complete technical documentation detailing how their product meets each specified performance requirement; company brochures or vague submissions will be disregarded. Responses must be emailed to Annette Tijerina no later than 30 July 2026 at 2:00 p.m. H.S.T., and any information provided becomes the property of the U.S. Government without return. All submissions are voluntary, carry no obligation for the Government to award a contract, and will be treated with due regard for proprietary or classified data. The North American Industry Classification System code for this effort is 335314, and responses received after the deadline will not be considered.
Navfacsyscom Pacific

POSTED

about 13 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 335314
New
Federal
Sources Sought SEL-9524
Solicitation # N6274226RSEL9524
The Naval Facilities Engineering Systems Command, Pacific is seeking information on alternative sources for a transformer protection relay with performance equivalent to the SEL-9524 model by Schweitzer Engineering Laboratories, intended for use in the Fiscal Year 2027 SIOP Project P-8026 at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam, Hawaii. The requirement includes a rugged, outdoor-rated GNSS antenna capable of receiving GPS or GPS/GLONASS satellite signals to provide precise time synchronization for protective relays, automation controllers, meters, SCADA systems, and other intelligent electronic devices. The antenna must feature IP68 environmental protection, high surge immunity, visual status indicators for power and operation, and seamless integration with existing substation time synchronization and automation systems to ensure a unified, traceable time reference across all critical infrastructure. This notice is a formal market survey under FAR 15.201(e) and does not constitute a solicitation, request for proposal, or invitation to bid. Responses must include comprehensive technical data demonstrating product compliance and compatibility with current systems; company brochures will not be accepted. All submissions must be sent electronically to Annette Tijerina by 2:00 p.m. H.S.T. on July 30, 2026, and any information received after this deadline will be disregarded. Submissions became U.S. Government property upon receipt and may be used for evaluation and potential future procurement decisions. The Government reserves the right to reject incomplete or insufficient responses and will treat all proprietary or classified information in accordance with applicable regulations.
Navfacsyscom Pacific

POSTED

about 13 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 335314
New
DIBBS
Controller Parts Kit Assembly & FulfillmentThe contract requires the supply and assembly of a government-specified controller parts kit identified by NSN 6110-01-564-6930, involving full sourcing of individual components, verification of quality standards, and strict adherence to Department of Defense Logistics Agency packaging and labeling protocols. The work must be performed to ensure full compliance with military specifications and readiness for direct integration into defense systems, with all deliverables subject to rigorous inspection and documentation requirements. The solicitation is categorized as a subcontract under NAICS code 335314, with performance obligated to take place in San Diego, California, at the ZIP code 92136. Responses are due by August 10, 2026, and the contract was posted on July 28, 2026, under the Maritime Supply Chain organization within the Department of Defense. All parties must be prepared to meet the detailed technical and logistical criteria established by DLA, with no flexibility in packaging, labeling, or componentTraceability standards.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
Electrical Component Manufacturing – Solenoid ProductionThe contract requires full-scale manufacturing of military-grade solenoids in compliance with Department of Defense specifications, encompassing every phase of production from design validation and materials sourcing to winding, assembly, and rigorous testing. All work must meet stringent quality and performance standards aligned with DLA requirements, ensuring the solenoids are fit for critical military applications. The manufacturing process must be fully integrated, with the contractor responsible for end-to-end delivery, including traceability of components and documented adherence to technical and procedural guidelines. The solicitation is structured as a subcontract under the NAICS code 335314, focused on electrical equipment manufacturing, and is managed by the Land Supply Chain division of the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a deadline for responses set for August 10, 2026. While specific set-aside provisions and point of contact details are not provided, the contract is publicly accessible through the DIBBS platform, indicating it is open to qualified subcontractors capable of meeting military-grade production standards. All activities must align with federal defense procurement protocols and ensure timely, compliant delivery of mission-critical components.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332312
New
DIBBS
PANEL, STRUCTURAL, AI
Solicitation # SPE4A7-26-Q-0920
The contract is for one structural panel, item number 1560-01-196-4405, under solicitation SPE4A7-26-Q-0920, with a delivery deadline of 440 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions use the revision active on the RFP issue date unless a later amendment supersedes it. The item is subject to multiple DLA-specific requirements including packaging, inspection and acceptance at origin, physical identification and marking of the bare item, measurement and test equipment standards, and configuration change management through engineering change proposals. Importantly, the item is exempt from item unique identification per service customer request, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, regardless of location, and only contractors with approved JCP certification, completed training, and DLA clearance may access such data. All applicable DFARS clauses, including those governing export control and contractor responsibilities, are in effect. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with NyA Currie as the primary point of contact.
Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332322
New
DIBBS
DUCT ASSEMBLY, AIR COND
Solicitation # SPE4A7-26-Q-0921
The contract is for the procurement of four duct assemblies for aircraft air conditioning and heating systems, identified by NSN 1660-01-138-4412, with a delivery requirement within 300 days after award. The solicitation number is SPE4A7-26-Q-0921, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with a response deadline of August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and been approved by DLA. Packaging, inspection at origin, removal of government identification from non-accepted items, and calibration of test equipment are governed by specific DLA requirements, and all delivered items must adhere to rigorous quality standards applicable to both manufacturers and non-manufacturers.
Sheet Metal Work Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
DUCT, AIR CONDITIONING
Solicitation # SPE4A7-26-Q-0882
The procurement is for two units and one unit of NSN 1560008784950 DUCT, AIR CONDITIONING, with delivery required to DLA Distribution Warner Robins within 282 and 197 days after contract award respectively. All responsible suppliers are invited to submit quotes electronically, and timely submissions will be considered. The solicitation number is SPE4A726Q0882, published on July 29, 2026, with a response deadline of August 10, 2026. This is a combined solicitation under NAICS code 336413 for aircraft and parts manufacturing, managed by the DLA Aviation office within the Department of Defense. The contracting office is located in Richmond, Virginia, with no specific place of performance identified beyond the delivery destination. Primary inquiry points must be directed via email to DibbsBSM@dla.mil, and full solicitation details including block 5 contact information are accessible through the SAM.gov workspace or DIBBS portal using the solicitation number.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
BRUSH SEAL, COVER
Solicitation # SPE4A7-26-Q-0886

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details
New
DIBBS
FITTING, STRUCTURAL
Solicitation # SPE4A7-26-Q-0928

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROO
Solicitation # SPE4A7-26-T-600H
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-600F
The contract is for 493 blind rivets identified by NSN 5320-01-467-9293 and part number MS90353S0506D, governed by the technical standards NASM90353 Revision 4 and NASM81177 Revision 2, with all hardware manufactured after the solicitation date required to comply with the current revisions of these standards. The item is classified as a critical application and must meet the DLA Master List of Technical and Quality Requirements, which override any referenced packaging standards like ASTM D3951. Inspection and acceptance occur at origin under RQ009, with sampling conducted per MIL-STD-1916 or ASQ H1331 Table 1 using zero defect acceptance unless otherwise specified; unspecified attributes are treated as major with an AQL of 1.0. Packaging must follow MIL-STD-129 and DLA Packaging Requirements RP001, including palletization guidelines, with no shelf life requirement and no need for Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The delivery is FOB origin with a strict 0% variance tolerance, due in 191 days by February 14, 2027, and must be shipped to Tinker AFB Oklahoma. The unit price is $493.00 per each, totaling a contract value of $243,049. The procurement is subject to Covered Defense Information provisions and follows DLA transportation notes C19 and C20.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
STUFFING TUBE
Solicitation # SPE4A7-26-Q-0919
The contract specifies the procurement of a stuffing tube identified by NSN 5975-01-722-0867 and part number 630A007MT203D, with a firm fixed price and no variance allowed in quantity—exactly one unit is required. Delivery is due 155 days after the award date, with FOB origin terms and inspection and acceptance occurring at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions including packaging per RP001, removal of government identification from non-accepted items per RQ011, and bare item marking per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified using specified levels or AQLs. Packaging must comply with MIL-STD-129 labeling and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if hazardous under FED-STD-313, with DLA requirements taking precedence. Palletization must adhere to RP001 and commercial packaging standards. The item must be shipped via the fastest traceable means, explicitly prohibiting parcel post, to the designated government freight address in Port Hueneme, California, with shipment details including RDD 777 and TCN N4242052261530. The government use section includes internal tracking codes, and the required delivery date is May 22, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
STIFFENER, AIRCRAFT
Solicitation # SPE4A7-26-Q-0888
The contract pertains to the procurement of four aircraft stiffeners identified by NSN 1560-01-467-5640, with a delivery requirement of 221 days after award. Technical and quality specifications are governed by referenced requirements from the DLA Master List, including packaging standards, tailored quality controls, inspection protocols at the manufacturer’s facility, and procedures for removing government identification from non-accepted items. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program who have completed mandatory DLA training and questionnaire approvals. The solicitation, issued under number SPE4A7-26-Q-0888, was posted on July 29, 2026, with responses due by August 8, 2026. The contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with April Reed as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
SEAL, SIDE COWL
Solicitation # SPE4A7-26-Q-0885
The contract item is a SEAL, SIDE COWL with NSN/Part Number 1560-01-084-9350, for a quantity of 12 units, under Purchase Request 7017272093, with delivery required within 112 days after award. The solicitation number is SPE4A7-26-Q-0885, posted on July 29, 2026, with responses due by August 8, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure to foreign persons, regardless of location, constitutes an export requiring prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data. Access is restricted to contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from DLA to handle such data. Primary point of contact is April Reed, reachable via email and phone provided.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
STUFFING TUBE
Solicitation # SPE4A7-26-Q-0932
The contract specifies the procurement of 10 stuffing tubes with NSN 5975-99-676-3468 under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required 145 days after award date, with inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E using preservation method 10, dry preservation, and unit container D3, and marked according to MIL-STD-129 without special marking codes. Packaging and preservation are subject to DLA’s RP001 requirements and explicitly prohibit mercury or mercury compounds. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract references technical and quality requirements identified by R and I numbers from the DLA Master List, and all packaging, marking, and preservation instructions must align with these standards. Transportation directions specify delivery to USNS EARL WARREN via parcel post and freight shipping addresses, with shipping details governed by DLAD PROC NOTES C19 and C20. The vendor must use VSM for U.S. shipments and comply with the provided TCN, RDD, project, and signature codes. The government’s material need date is July 17, 2026, and the contract solicitation number is SPE4A7-26-Q-0932.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
SPACER, SPECIAL SHAPED
Solicitation # SPE4A7-26-T-599N
The contract is for 56 special-shaped spacers identified by NSN 5365-01-588-4009 under solicitation SPE4A7-26-T-599N, with a delivery requirement of 171 days after order. The item is classified as a commercial item, allowing the use of a Certificate of Conformance unless restricted by a Quality Assurance Letter of Instruction. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in the sample lot unless otherwise stated. The contractor must comply with DLA packaging requirements and technical quality specifications referenced in the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. The item is subject to export control under ITAR or EAR, restricting technical data sharing with foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data requires JCP certification, completion of DOD export training, and DLA approval. The contractor must also maintain CMMC Level 2 certification through a certified third-party assessment organization. Physical identification of the product must meet specified marking requirements, and covered defense information protocols are enforced. The contract is managed by the Department of Defense through the ASC Supplier Operations AE and AF Division, with performance located in New Cumberland, PA, and primary point of contact is Tamera Greene.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details