Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Inspection and Quality Assurance (Source Inspection Support)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Defense Logistics Agency under the Department of Defense, focuses on providing inspection and quality assurance support for reconditioned bearings. The primary objective is to conduct source inspections to ensure technical compliance, verify correct part identification, and confirm the absence of corrosion, with the added requirement of performing sample testing when necessary. Classified under NAICS code 541330, the agreement establishes the necessary oversight to maintain quality standards for critical components. The contract was posted on July 1, 2026, and serves as a specialized quality control measure to validate that all reconditioned parts meet strict agency specifications before acceptance.

General Info

DLA subcontract for inspection and quality assurance of reconditioned bearings for technical compliance.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541330 - Engineering Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-P-W589.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING, BALL AND RO

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 1

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct source inspections to verify technical compliance, absence of corrosion, and correct part ID for reconditioned bearings, including sample testing if required.

Similar Contracts

Same NAICS industry code

Pure Water Southern California Direct Potable Reuse Testing Facility

Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility

Kiewit Infrastructure West Co. is seeking proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This solicitation is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330 for engineering services. The solicitation was posted on October 28, 2026, with a response deadline of November 3, 2026. Interested parties should direct inquiries to the primary point of contact, Sepideh Sippy Aria, to ensure all submission requirements are met by the closing date.

Kiewit Infrastructure West Co.

POSTED

about 1 hour ago

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Relevant expertise should align with NAICS codes for administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The primary point of contact for this opportunity is Liz Jordan-Wettstein. This solicitation specifically targets DBE certified firms to support the critical infrastructure and operational resilience of the utility agency within the state of California.

Aanko Technologies Inc.

POSTED

about 1 hour ago

DEADLINE

Structural Engineering Services (PE Certified)This subcontract for Structural Engineering Services supports prime contractors on projects for the La Habra Heights County Water District in Whittier, California. The scope of work involves performing structural calculations and anchoring designs specifically for 12-foot diameter vessels and valve tree supports. The selected provider is responsible for creating vessel-specific anchor bolt templates based on provided geotechnical reports. A critical requirement for this contract is that all deliverables, including calculations and templates, must be certified by a Professional Engineer registered in the state of California. Interested parties must submit their responses by November 25, 2026.

La Habra Heights County Water District

POSTED

about 5 hours ago

DEADLINE

Synthetic Environment Generation for AI TrainingThis subcontract for the U.S. Air Force focuses on Synthetic Environment Generation for AI Training, specifically providing high-fidelity synthetic imagery to prime contractors. The scope of work involves creating detailed 3D models of refueling aircraft and simulating various lighting and weather conditions to generate labeled ground-truth datasets. To execute these tasks, the contractor must utilize high-end 3D rendering engines such as Unity or Unreal Engine 5 and ensure strict compliance with DFARS 252.204-7012 security standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026. The final deliverables for this engagement consist of comprehensive labeled synthetic image and video datasets designed to enhance AI training capabilities.

POSTED

about 5 hours ago

DEADLINE

Advanced Thermal Management DesignThe Advanced Thermal Management Design subcontract is a U.S. Air Force project focused on the development of thermal packaging for laser systems. The selected contractor will be responsible for performing thermal modeling and CFD analysis, as well as the fabrication of liquid cooling loops and cold plates utilizing high-thermal-conductivity materials. The primary deliverables include functional thermal management prototypes and validated thermal analysis reports to support prime contractors. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. The solicitation was posted on October 28, 2026, with a response deadline set for November 25, 2026.

POSTED

about 5 hours ago

DEADLINE

BSAC Facility Readiness ContractorThe BSAC Facility Readiness Contractor is a subcontract opportunity under the General Services Administration's PBS Office of Leasing, specifically supporting GSA warehouse lease projects in Kennebunkport, Maine. The primary objective of this contract is to perform critical technical upgrades and finalizations for prime contractors to ensure facilities achieve Beneficial Substantial Asset Completion. Key responsibilities include executing final facility tuning, installing seismic bracing, and implementing energy-efficient upgrades to align with government sustainability and seismic standards. The ultimate goal of the engagement is to secure final BSAC certification and formal government acceptance of the asset. Interested parties should note the response deadline of November 11, 2026.

Pbs Office Of Leasing

POSTED

about 5 hours ago

DEADLINE

Cleaning System Hardware DesignThe Cleaning System Hardware Design subcontract is a U.S. Navy project focused on the design and prototyping of mechanical delivery systems for TDR Tank Level Indicator projects. The selected contractor will be responsible for creating CAD models and developing specialized delivery mechanisms, such as ultrasonic systems or sprayers, specifically engineered for tank environments. To successfully execute the contract, the provider must possess professional CAD software and rapid prototyping equipment to produce final engineering drawings, 3D models, and a functional physical prototype. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. The solicitation was posted on October 28, 2026, with a response deadline of November 25, 2026. The project supports prime contractors within the U.S. Department of Defense to enhance the hardware capabilities of naval tank monitoring systems.

POSTED

about 5 hours ago

DEADLINE

Hypersonic Aerothermodynamics ConsultantThe Hypersonic Aerothermodynamics Consultant subcontract is a U.S. Air Force project focused on the computational modeling and simulation of non-oxygen based hypersonic ground test environments. The selected contractor will utilize CFD software such as OpenFOAM or ANSYS Fluent on HPC clusters to model gas dynamics and simulate sensor interactions with hypersonic flow fields. Key deliverables include the production of detailed simulation reports and the development of validation models for prime contractors. This opportunity is a total small business set-aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees. Due to the nature of the defense work, the contractor must maintain strict ITAR and EAR compliance and adhere to NIST SP 800-171 and CMMC cybersecurity standards. Responses are due by November 25, 2026.

POSTED

about 5 hours ago

DEADLINE

Cryogenic and Thermal Management EngineeringThis subcontract opportunity with the U.S. Air Force focuses on providing specialized thermal engineering analysis for high-enthalpy ground testing projects. The selected contractor will be responsible for the thermal modeling and design of vacuum jackets and cryogenic cooling interfaces intended to protect imagers from extreme heat environments. Technical execution requires proficiency in ANSYS or COMSOL to produce detailed thermal analysis reports and cooling system design specifications. The project is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026.

POSTED

about 5 hours ago

DEADLINE

Secure Signal Routing Hardware DesignThe Secure Signal Routing Hardware Design subcontract focuses on the architectural design and schematic development of a secure Input-Output Unit for US Navy shipboard signal projects. The scope of work involves designing circuit topologies for signal isolation and the secure routing of Navigation and HM&E signals, utilizing EDA software to create conceptual diagrams for physical interfaces. Key deliverables include technical feasibility reports and comprehensive hardware design documents. This opportunity is a total small business set-aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees. Due to the handling of Controlled Unclassified Information, contractors must maintain CMMC compliance. Interested parties must submit their responses by November 25, 2026.

POSTED

about 5 hours ago

DEADLINE

Geotechnical Soil Analysis and Pavement RecommendationThis small business set-aside subcontract, issued by the Department of the Interior's Fish and Wildlife Service, requires geotechnical soil analysis and pavement recommendations for various project sites. The selected contractor will perform soil borings at roadway and parking locations using drill rigs and laboratory equipment to determine load-bearing capacity and soil composition. These efforts will culminate in a Geotechnical Engineering Report providing specific recommendations for pavement thickness and sub-base materials. To qualify for this engagement, the contractor must employ a licensed Professional Geologist or Professional Engineer. The opportunity is categorized under NAICS code 541330 and is specifically reserved for small businesses. Interested parties must submit their responses by November 10, 2026.

Fws Contracting Activity

POSTED

about 5 hours ago

DEADLINE

Civil Site Design for Parking and Access RoadsThis small business set-aside subcontract involves providing detailed civil site engineering design for U.S. Fish and Wildlife Service projects. The scope of work focuses on the layout, grading, and drainage of various infrastructure elements, including headquarters and overflow parking, maintenance building access roads, and gravel laydown areas. The selected contractor will be responsible for delivering signed and sealed engineering drawings, technical specifications, and design reports. Technical requirements include proficiency in AutoCAD/Civil 3D and hydraulic modeling software. Additionally, the performing engineer must hold a valid Minnesota Professional Engineer license. This opportunity is categorized under NAICS code 541330 and is managed by the Department of the Interior.

Fws Contracting Activity

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

DEADLINE

Mold Release Agent Supplier (NSN 8030-01-233-1265)This subcontract involves the supply of a specific mold release agent, identified by NSN 8030-01-233-1265, to support prime contractors fulfilling Defense Logistics Agency requirements. The supplier must provide one 5-gallon can delivered FOB Destination to Illinois and US APO AE. To ensure product integrity, the agent must maintain a 12-month shelf life and be stored at temperatures between 60 and 80 degrees Fahrenheit. The contractor is required to adhere to strict regulatory and military standards, including compliance with the Buy American Act, the Berry Amendment, and 29 CFR 1910.1200. Additionally, all shipments must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. This procurement falls under NAICS code 325998 and is managed through the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Supply of Refractory Castable Mix (NSN 9350015694317)

Clay Building Material and Refractories Manufacturing

POSTED

DEADLINE

Supply of Incandescent Lamps (NSN 6240-01-563-9037)This subcontract through the Defense Logistics Agency involves the supply of 220 specialized incandescent lamps, specifically part number M6363/9-2 under NSN 6240-01-563-9037. The contractor is responsible for manufacturing or sourcing lamps that strictly adhere to MIL-DTL-6363J Revision J and MIL-DTL-6363/9A Revision A standards. All deliverables must meet rigorous quality assurance protocols per MIL-STD-1916 or ASQ H1331, with marking requirements following MIL-STD-129 and packaging compliant with RP001 and ASTM D3951. The project is subject to strict regulatory requirements, including mandatory compliance with the Berry Amendment and the Buy American Act. Performance for this contract is centered in Phoenix, Arizona, under NAICS code 334519. Interested parties must submit responses by November 9, 2026, to support prime contractors on DLA Troop Support projects.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

FOB Destination Delivery Services (Patuxent River, MD)

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Specialized Pneumatic Vehicular Tire (NSN 2610016070189)

Tire Manufacturing (except Retreading)

POSTED

DEADLINE

Compressed Gas Regulator Supplier

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Fluorescent Lamp Supplier

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Fluid Pressure Regulating ValvesThis subcontract involves the supply of two fluid pressure regulating valves for prime contractors supporting the Defense Logistics Agency. The specific requirement is for NSN 4820002856125, corresponding to Watts Regulator Co part number R-119-02C. All items must be delivered FOB Origin and must adhere to strict packaging and marking standards, specifically ASTM D3951 for packaging and MIL-STD-129 for shipment marking. The procurement falls under NAICS code 332912 and is managed through the Department of Defense. Interested parties must note the response deadline of November 9, 2026, to ensure compliance with the solicitation timeline established by the agency.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Manufacturer of Specialized Metal Bar (P/N 13056447)

POSTED

DEADLINE

Industrial Safety Lanyard SupplierThis subcontract involves the supply of an industrial safety lanyard for prime contractors under Defense Logistics Agency Troop Support contracts. The required product must match NSN 4240015516594 and adhere to specifications set by D B Industries or Carbis Ladders Division. All items must be packaged according to ASTM D3951 and marked in compliance with MIL-STD-129, while the supplier must ensure full adherence to the Balance of Payments Program and Buy American requirements. The contract specifies the delivery of one industrial safety lanyard FOB Destination to the USS Anchorage LPD 23. Managed under NAICS code 339999, the procurement process includes a response deadline of November 9, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Valve Body Supplier (NSN 4810-01-541-6739)This subcontract involves the sourcing and manufacture of one valve body conforming to NSN 4810-01-541-6739 for prime contractors supporting Defense Logistics Agency weapons support maritime hardware and electrical contracts. The selected supplier is responsible for ensuring the item is packaged according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements. The completed unit must be delivered to the designated DLA location in Buzzards Bay, Massachusetts, within 20 days of the contract award. This requirement falls under NAICS code 332911 and is managed by the Department of Defense.

Industrial Valve Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Origin Inspection & Acceptance Services

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection and Acceptance Support

Defense Logistics Agency

POSTED

DEADLINE

First Article Testing (FAT) Services

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection at Origin

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance & Inspection Services for Precision Components

ASC COMMODITIES DIVISION

POSTED

CLOSED

Quality Assurance and Inspection Services

Defense Logistics Agency

POSTED

DEADLINE

Origin Inspection Coordination & Quality Assurance

Defense Logistics Agency

POSTED

DEADLINE

Inspection & Quality Assurance Services

Defense Logistics Agency

POSTED

DEADLINE

On-Site Inspection and Quality Assurance

Defense Logistics Agency

POSTED

DEADLINE

Passive RFID Tagging and Electronic Marking Services

Defense Logistics Agency

POSTED

DEADLINE

On-Site Work Surveillance and Inspection Support

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection Services

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS