Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

INSULATING COMPOUND KI

Active
SPE4A6-26-T-09ZQFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of an electrical insulating compound kit designated as a commercial off-the-shelf item, consisting of three separately packaged components: one quart of Stycast 2651-40, one 4-ounce jar of Catalyst 9, and one 4-ounce jar of Catalyst 11, all supplied by Henkel Adhesives Corp under part number STYCAST 2651-40 & CATALYST 9&11. The item is classified as a critical application product with a non-extendable shelf life of six months, designated as Type I (Code F), and requires strict adherence to packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, including a contents list within each box and special labeling for shelf life. Hazardous communication standards are mandatory, requiring approved Safety Data Sheets and OSHA-compliant hazard labels reviewed and submitted to the DLA Aviation HMIRS office prior to award. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise specified, and all attributes are subject to defined verification levels or AQLs. The unit of issue is a kit, with a delivery requirement of 20 days FOB destination, no quantity variance permitted, and inspection and acceptance occurring at the destination. The delivery address is the Naval Submarine Support Facility in Groton, Connecticut, and shipment must be via the fastest traceable means, explicitly prohibiting parcel post. Packaging for hazardous materials must comply with MIL-STD-2073-1 Appendix D, ensuring all components within the kit are properly cushioned, contained in a single box, and barcoded per MIL-STD-129. The contract references DLA Master List requirements for technical and quality standards, and packaging compliance is governed by RP001 and IP025. The solicitation number is SPE4A6-26-T-09ZQ, with an original required delivery date of July 22, 2026, and the contract is under the Department of Defense’s ASC Commodities Division. The contracting office is identified with specific points of contact and procurement data, and the item is assigned NSN 5970-00-081-4333 with a single unit quantity of one kit. All documentation, including SDS and labeling, must be approved and

General Info

Procurement of one kit of Stycast 2651-40 with Catalysts 9 and 11 for Naval Submarine Support Facility, Groton, CT, with strict shelf life, packaging, and hazard compliance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

BOX 300, GROTON, CT, 06349-5300, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-09ZQ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Berkeley Vaughan
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSULATING COMPOUND KIT,ELECTRICAL
INSULATING COMPOUND KIT, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
"SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS
AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY
CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND
LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO
THE DLA AVIATION HMIRS OFFICE (VBA)."
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RS008: Shelf-life requirement RS001 for a TYPE I (CODE F) item with a shelf life of 6 months (non-extendable) applies to this item.
UNIT OF ISSUE = KIT (KT), ONE KT CONSISTS OF THREE PARTS PACKAGED
SEPARATELY: ONE QUART OF STYCAST 2651-40; ONE 4-OZ JAR OF CATALYST 9;
ONE 4-OZ JAR OF CATALYST 11.
CRITICAL APPLICATION ITEM
HENKEL ADHESIVES CORP 1B8U0 P/N STYCAST 2651-40 & CATALYST 9&11
SPE4A6-26-T-09ZQ
SECTION B
PR: 7017607533 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017607533 0001 KT 1.000
NSN/MATERIAL:5970000814333
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
"PRESERVATION & PACKAGING SHALL BE
I/A/W THE LATEST REVISION OF MILITARY
SPECIFICATION MIL-STD-2073-1 APPENDIX D,
FOR PACKAGING OF "KITS".
QUANTITIES OF THE SAME NSN/PART NUMBER OF
COMPONENTS WITHIN A KIT SHALL BE PACKAGED IAW
NSN PACKAGING REQUIREMENTS, THEN MARKED
IAW MIL-STD-129.
PLACE CONTENTS OF THE KIT IN ONE (1) BOX,
ENSURING THE BOX IS SUFFICIENT TO PREVENT DAMAGE
TO CONTENTS OF KIT.
CONTENTS MUST BE CUSHIONED AS NECESSARY TO
PREVENT MOVEMENT AND DAMAGE OF CONTENTS. EACH
BOXED KIT MUST CONTAIN A CONTENTS LIST
CONSISTING OF COMPONENT PART NSNS, PART NUMBER
AND QUANTITY PER KIT. BOX SHALL BE MARKED AND
BAR CODED IAW MIL-STD-129.
PARCEL POST ADDRESS:
V68316
SPE4A6-26-T-09ZQ
SECTION B
PR: 7017607533 PRLI: 0001 CONT’D
NAVAL SUBMARINE SUPPORT FACILITY
NEW LONDON
BOX 300
GROTON CT 06349-5300
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V68316
NSSF SUPPLY DEPT
BLDG 33 AROGONAUT ROAD
GROTON CT 06349-5000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V683166196D914
RDD: 222
PROJ: JK5 TP 2
SUPP ADD: YNB06C SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: S9B ADV: FC: CR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE4A6-26-T-09ZQ NSN/Part Number: 5970-00-081-4333 Quantity: 1 KT Purchase Request: 7017607533QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335932
New
DIBBS
INSULATION SLEEVINGThe contract specifies the procurement of insulation sleeving with part number ES2000-NO.4-B7-0-75MM and NSN 5970-01-586-8481, requiring a firm quantity of 31 units with no variance permitted. Delivery is required within five days of contract award, FOB origin, with inspection and acceptance occurring at the destination facility in Tobyhanna, Pennsylvania. The material is designated as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which override any commercial standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with hazardous material handling governed by TQ requirement IP025 if applicable. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are classified with assigned verification levels or AQLs. The insulation sleeving has no shelf life requirement and must be packed in minimum quantities of 1000 pieces per pack, though only 31 units are ordered. All items must be physically marked per RQ017 and shipped via the fastest traceable means, excluding parcel post. The designated receiving and shipping address is the Tobyhanna Army Depot, with specific bay and building details provided. The contract mandates compliance with configuration change management procedures, and any variance requests must be formally submitted. The required delivery date is September 23, 2025, with the contract solicitation issued under SPE4A7-26-T-598C and administered by the Department of Defense’s ASC Supplier Operations AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELECTRThis contract specifies the procurement of electrical insulation tape as a commercial item with strict technical and packaging requirements. The tape must have a nominal length of 2160 inches, a width of 0.750 inches, and a thickness of 0.0070 inches, supplied in rolls of 180 feet each. The product must be white in color and comply with Technical Data Package Rev A Gen 1 under CID A-A-59770A and MIL-STD-129R, with the NSN 5970002848565 and part number AA59770-4K5F4D. It is designated as a critical application item with a shelf life code of 5, meaning it has an 18-month shelf life that is extendable. The item must not contain intentional additions of mercury or mercury compounds, except under specific exceptions for functional uses in batteries, lighting, instruments, or chemical reagents, and portable mercury-containing devices must include shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with code U, including prescribed methods for preservation and marking in accordance with MIL-STD-129, and palletization must meet DLA packaging requirements. The contract mandates delivery FOB destination within 20 days, with zero variance allowed in quantity, and inspection and acceptance occur at destination. The solicitation number is SPE7M2-26-T-5781, issued by the Department of Defense’s Nuclear Reactor Program, with a response deadline of August 10, 2026.
NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, ELThis contract specifies the procurement of electrical insulation sleeving with part number M23053/1-206-0, governed by SAE AS23053 Revision A dated 03/01/2018 and compliant with QPL-AS23053-QPD dated 04/23/2026. The item is classified as a critical application product with a shelf life of 12 months, extendable, and must retain at least 85 percent of its minimum shelf life upon receipt by the government. All components must be sourced exclusively from qualified manufacturers listed on the approved QPL, and the supplier is required to provide traceability documentation per DLA Procurement Note C03 (August 2016) and retain full supply chain records. The product must not contain intentionally added mercury or mercury compounds, except for specific exempted uses defined by NAVSEA, and portable devices with mercury must include a secondary containment system. Packaging must conform to MIL-STD-2073-1E, with marking in accordance with MIL-STD-129 and special shelf life labeling code 33. The items require palletization as per DLA packaging requirements and are subject to zero-defect sampling per MIL-STD-1916 or ASQ H1331, with critical attributes verified at a QPL of 0.1. Delivery is FOB origin within 10 days, with a quantity of 40 feet and no tolerance for shortfalls. Inspection and acceptance occur at the destination, and all documentation must align with DLA’s technical and quality requirements referenced through R-numbers.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
Federal
NAWCAD WOLF- Purchase connectors & conduit to repair EMP assembliesAll quotes must strictly comply with NAVSEA-MIL-PRF-24758A(SH) material specifications and be submitted via email to Gabrielle McKee at gabrielle.l.mckee2.civ@us.navy.mil no later than 12:00 PM Eastern Time on July 16, 2026. This solicitation, identified as N0042126Q11480002, is a firm fixed-price procurement issued under FAR Part 8.405-6(b)(1) and requires vendors to be currently registered in the System for Award Management (SAM) database. Offerors must provide complete technical documentation including datasheets, drawings, or specifications to support their submission, as evaluations will be based solely on the information supplied. The award will be made to the lowest priced offer that meets or exceeds all technical acceptability standards, with the government retaining sole discretion to reject proposals that fail to satisfy minimum requirements. Each response must include completed Section K clauses specifying FOB destination, shipping costs, IUID labeling fees, tax ID, UEID, CAGE code, small business status, estimated delivery date, a copy of any applicable pricelist, and the total quote amount. The procurement is for connectors and conduit to repair EMP assemblies, with performance located in Saint Inigoes, Maryland, and is administered by the Naval Air Warfare Center Air Division in Pax River, Maryland.
Naval Air Warfare Center Air Division

POSTED

about 11 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335932
New
DIBBS
JUNCTION BOX ASSEMBThe contract pertains to the procurement of 37 junction box assemblies under solicitation SPE4A7-26-T-597P, with a total price of $37.00 per unit and a delivery requirement of 126 days from the contract award date, to be delivered FOB origin. All items must comply strictly with DLA packaging requirements, including MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and RP001 for palletization. No mercury or mercury-containing compounds are permitted in the product, its preservation, packaging, or marking, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents, all of which must meet NAVSEA 5100-003D containment standards. Quality assurance is governed by MIL-STD-1916 or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively; unspecified attributes are treated as major. Inspection and acceptance occur at the origin, with zero non-conformances required in the sample lot unless otherwise stated. The contractor must adhere to the most current revisions of all referenced drawings, specifications, and standards as of the contract’s effective date, including specific technical drawings with revision numbers and part numbers. Compliance with CMMC Level 2 certification, ISO 9001:2015, and proper calibration of test equipment is mandatory. The contract is a total small business set-aside under NAICS code 335932, with the delivery destination designated as DLA Distribution San Joaquin in Tracy, California, and the item identified by NSN 5975-01-556-9356.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELEThe contract specifies the procurement of electrical insulation tape meeting rigorous technical and quality standards under the DoD’s DLA framework, with the NSN 5970001173704 and part identifier TYPE I, CLASS 5 as defined by CID A-A-59474D Revision D dated January 23, 2024. Each roll is 108 feet long, 0.5 inches wide, with a 3-inch inner core, and must conform to MIL-STD-129R for marking and MIL-STD-2073-1E for packaging. The product has a shelf life of 18 months under Type 2 conditions and must be marked with Special Marking Code 33 indicating Type II shelf life compliance. Sampling follows MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; acceptance requires zero non-conformances unless otherwise contracted. Packaging must adhere to DLA’s RP001 requirements and palletization standards, with all marking strictly following MIL-STD-129. The unit of issue is RO, with a contracted quantity of two rolls, delivered FOB origin within 20 days, subject to zero variance in quantity. Inspection and acceptance occur at destination, and the item is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE4A7-26-T-595W, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with the point of contact Channon Dillard at dillard.channon@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVINGThe contract specifies the procurement of 4 units of insulation sleeving, identified by the NSN 5970016309496 and part number 3PS-750-2-WT-S from Brady Worldwide Inc, classified as a commercial off the shelf item. Delivery is required within 123 days to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB origin terms with no tolerance for quantity variance. The material must be packaged in compliance with DLA Master List of Technical and Quality Requirements, specifically adhering to RP001 for packaging and MIL-STD-129 for marking and labeling. If the item is not classified as hazardous under Fed-Std-313, commercial packaging per ASTM D3951 applies, but DLA’s technical requirements override any conflicting commercial standards. Hazardous materials must follow TQ requirement IP025. All government identification must be removed from non-accepted supplies in accordance with RQ011. Inspection and acceptance occur at the destination, and the unit of issue is RO. The required ship date is December 6, 2026, with an original delivery deadline of February 11, 2027. Transportation and shipping logistics must follow DLAD Proc Notes C19 and C20. The solicitation number is SPE4A6-26-T-09YA, with a response deadline of August 4, 2026, and point of contact is Larry Ferguson of the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
CONDUIT OUTLETThe contract pertains to the procurement of 109 conduit outlets with NSN 5975-01-555-8269 and part number HBL560R9W from HUBBELL INC WIRING DEVICE DIV, under solicitation SPE4A7-26-T-596L. The requirement is divided into two line items: 8 units at $8.00 each and 101 units at $101.00 each, with a total quantity of 109 units required. Delivery is FOB origin with a 40-day lead time and a fixed delivery date of September 14, 2026; no quantity variance is permitted. Inspection and acceptance occur at the destination, and all items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. Packaging must follow MIL-STD-129 for labeling and MIL-STD-1916 or ASQ H1331 for sampling, with a zero-defect acceptance criterion unless otherwise stated. Non-hazardous items must be commercially packaged per ASTM D3951, while hazardous items require compliance with TQ requirement IP025. Palletization must adhere to RP001 DLA packaging standards. Shipping instructions designate two distinct destinations: Albany, GA for freight and New Cumberland, PA for parcel post. The contract specifies the DoD-authorized unit of issue and reference links to align with ANSI X12 standards. Point of contact is Richard Ellery at DLA, with the solicitation posted July 27, 2026, and responses due by August 4, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
Supply of Electrical Insulation Tape (NSN: 5970-01-706-9505)The contract calls for the procurement and delivery of one unit of commercial off-the-shelf electrical insulation tape identified by NSN 5970-01-706-9505, with strict adherence to military specifications governing performance, packaging, labeling, shelf-life, and hazardous material handling requirements. The tape must meet all applicable defense standards to ensure compatibility and safety in operational environments, and the supplier is responsible for full compliance across every phase of delivery, including proper documentation and compliance with regulatory constraints. The solicitation is classified as a subcontract under NAICS code 335932, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 3, 2026. Performance is to be executed to the FPO address with ZIP code 09587, indicating delivery to a military postal location, likely for overseas or deployed operations. The contract was posted on July 26, 2026, and all submissions must be completed before the deadline to qualify for consideration under the procurement process.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
Electrical Conduit Outlet SupplyThe contract calls for the supply of eight units of NSN 5975015558269, a Conduit Outlet, strictly compliant with military specifications for form, fit, and function. The item must meet all required standards for packaging, labeling, and delivery to ensure operational readiness and seamless integration into military electrical systems. The solicitation is issued as a subcontract under NAICS code 335932, targeting suppliers capable of fulfilling defense-grade manufacturing and logistical requirements. The opportunity was posted on July 26, 2026, with responses due by August 3, 2026. Performance is designated for Albany, Georgia, with a zip code of 31704-1128, indicating the location where the delivered goods must be transported and accepted. The contracting entity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, confirming the military nature of the procurement. All submissions must align with the technical and administrative expectations set forth by the defense supply chain, with no set-aside provisions specified, making it open to eligible subcontractors regardless of business size or category.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
CONDUIT OUTLETThe contract pertains to the procurement of 8 units of a conduit outlet with part number HBL560R9W and NSN 5975-01-555-8269, supplied by HUBBELL INC WIRING DEVICE DIV. Delivery is required within 41 days FOB origin, with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. The product must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for commercial packaging. Packaging must follow MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. Hazardous materials, if applicable, must be packaged per FED-STD-313 and TQ requirement IP025. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes are assigned specific verification levels or AQLs. The unit of issue is each, priced at $8.00, totaling $64.00. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, with a required ship date of September 14, 2026. The contract is issued under solicitation SPE4A7-26-T-595C and falls under NAICS code 335932.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
CONDUIT, METAL, FLEXIBLEThis contract specifies the procurement of metal flexible conduit under solicitation SPE4A7-26-T-595F, with a required quantity of 24 units identified by NSN 5975-01-609-2819 and part numbers W-1297-20 from Woolf Aircraft Products, Inc. and 179489-3204 from Hypsan Precision Products, Inc. The item is source-controlled and must be manufactured and tested in strict compliance with limited rights data accessible only to approved vendors, with no government provision of technical data; only qualified suppliers with traceability to approved sources may quote. The delivery is FOB origin with a 166-day timeline, zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes applied. Palletization follows DLA guidelines, and the unit of issue is each. All quality, inspection, and verification requirements are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise specified. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Certificate of Conformance procedures under FAR 52.246-15 are authorized unless superseded by a quality assurance letter. Documentation for source approval requires a SAR package, and technical specifications referenced by R and I numbers are defined in the DLA Master List. Defense information protections apply, and all items must comply with the referenced technical data packages revisions issued through 2024. This is classified as a critical application item with mandatory compliance to design and testing protocols under the governing drawings and quality assurance provisions.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThe item specified is a PIN, STRAIGHT, HEADED with NSN 5315-00-734-1175, quantity of 67 units, under purchase request 7015605086, with delivery required within 12 days ADO. This item is subject to strict export control regulations under either ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons regardless of location, including foreign national employees or subsidiaries of U.S. companies. Access to this technical data is restricted solely to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A6-26-T-10AJ, posted on July 28, 2026, with responses due by August 5, 2026. The procurement falls under NAICS code 332510 and is managed by the ASC Commodities Division of the Department of Defense, with performance taking place in Cherry Point, North Carolina, 28533-5040. Primary point of contact is Debra Fowler, reachable via email and phone listed in the contract data.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract is for the procurement of 33 shear bolts identified by NSN 5306-01-058-0729 and part number MS21296-07011 under solicitation SPE4A6-26-T-09YW. All items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific standards for inspection, packaging, marking, and dimensional control such as MIL-STD-130 for identification, ASME Y14.5 for tolerancing, ASME B46.1 for surface texture, and AS8879 for screw threads. The item is classified as a critical application and must meet zero non-conformance acceptance levels under sampling plans aligned with MIL-STD-1916 or ASQ H1331, with attributes assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must conform to ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 guidelines. Item Unique Identification is not required per customer request, and government markings must be removed from non-accepted items. Inspection and acceptance occur at origin, with no variance allowed in quantity. Delivery is FOB origin with a required delivery date of October 4, 2026, and a need ship date of November 15, 2026. All items must be delivered to DLA Distribution San Diego at the specified address, and transportation logistics follow DLAD procedural notes. The unit price is $33 per piece, totaling $1,089.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for the procurement of 95 machine screws identified by NSN 5305-00-061-8243 and part number MS24693C288, classified as a commercial item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or amendment, and compliance with MIL-STD-1916 or ASQ H1331 sampling protocols is mandated unless otherwise directed, requiring zero non-conformances in the sample lot unless specified otherwise. All items must adhere to MIL-STD-130N for marking, with additional requirements for physical identification and removal of government identification from non-accepted supplies. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization compliant with DLA packaging standards, overriding any conflicting specifications. Delivery is due within 20 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination, and no quantity variance allowed. The shipment must be sent via traceable means, explicitly prohibiting parcel post, and delivered to Edwards Air Force Base, California, with specified freight and parcel addresses provided. The solicitation number is SPE4A6-26-T-09ZJ, with a response deadline of August 5, 2026, and the original required delivery date set for July 21, 2026. The Contract Line Item Number (CLIN) and purchase request are 7017589192 and 0001 respectively, with a unit price of $95.00 totaling $9,025.00. The unit of issue is each, and all documentation must align with DoD standardized formats. Identification and tracking are further governed by government-specific codes, and compliance with covered defense information protocols may apply. The point of contact for inquiries is Bernice Adams at DLA, and the contracting office is the ASC Commodities Division under the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335929
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAThe contract is for the procurement of 35 units of a special-purpose electrical cable assembly identified by NSN 6150-01-622-0955 and Thales part number A13089-R-042, with a firm fixed price structure and a delivery deadline of 280 days after award. The item is designated as a critical application component subject to stringent quality and security requirements, including compliance with DLA packaging standards MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required beyond standard government specifications. Packaging must adhere to DLA’s procurement guidelines, including specific methods for preservation, wrapping, and containment using designated materials and unit containers. Inspection and acceptance occur at origin, and the supply is delivered FOB origin without variance in quantity permitted. The contract mandates adherence to technical and quality requirements referenced in the DLA Master List, with sampling procedures governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise specified, and assigning verification levels of VII, IV, and II to critical, major, and minor attributes respectively. Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment is required, and physical identification of the item must be marked in accordance with RQ017. Covered Defense Information applies, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the service customer’s direction, with DFARS 252.211-7003(c)(1)(i) governing this exception. The contract is issued under solicitation SPE4A6-26-R-XB63, and all performance and compliance obligations are bound to the version of referenced standards in effect at the time of award.
Other Communication and Energy Wire Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
DIBBS
TUBE, TORQUE, ACTUATIThe contract pertains to the procurement of two torque tubes for flap actuation with NSN 1680-00-438-9161, under solicitation SPE4A6-26-Q-1205, with a delivery requirement of 252 days after award. The item is subject to strict export control due to the presence of technical data regulated under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer to foreign persons, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completion of required DOD export-controlled data training, and successful submission of the DLA Export-Controlled Technical Data Questionnaire are permitted to access this data. Additional requirements include CMMC Level 2 certification for third-party assessors and adherence to physical identification and bare item marking standards. The contract is managed by the Department of Defense’s ASC Commodities Division, with Bryan Distin as the primary point of contact, and responses must be submitted by August 10, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract is for the procurement of one blind rivet, identified by NSN 5320-00-451-9167, under solicitation SPE4A6-26-T-10AH, issued by the ASC Commodities Division of the Department of Defense. The item is classified as a commercial item and must comply with applicable military or consensus non-government part standards, with hardware manufactured after the solicitation date required to adhere to the current revision of the governing standard. Past production to prior revisions remains acceptable. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition size. Packaging must meet DLA requirements, and any non-accepted supplies must have government identification removed. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and NAVSEA-approved chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The delivery timeline is 224 days after order, with performance designated at Hill AFB, Utah, and responses due by August 5, 2026. The solicitation is fully competitive under federal specification and is open to all eligible suppliers through the DIBBS procurement portal.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 21,707 flat washers with NSN 5310-00-866-4418 under solicitation SPE4A6-26-T-09YV, issued by the Defense Logistics Agency’s ASC Commodities Division. The requirement is a total small business set-aside under NAICS code 332722, with responses due by August 5, 2026, and delivery expected within 127 days after order. The item is subject to stringent quality and technical requirements, including CMMC Level 2 certification for any third-party assessment, tailored higher-level quality standards for both manufacturers and non-manufacturers, inspection and acceptance at origin, and specific markings for bare items. Technical data associated with this item is governed by export controls under ITAR or EAR, restricting access and disclosure to authorized entities only, requiring compliance with DFARS 252.225-7048. Access to controlled technical data is limited to contractors approved by DLA, holding valid US/Canada Joint Certification Program credentials, and having completed mandatory DLA training and questionnaires. Packaging must meet DLA standards, and government identification must be removed from non-accepted supplies. The place of performance is New Cumberland, Pennsylvania, with Xavier Keyes designated as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIALThis contract is for a special-purpose electrical cable assembly, identified by NSN 5995-01-697-5115 and part number 79356, with a quantity of 21 units, issued under solicitation SPE4A6-26-T-09ZA by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application item, subject to stringent quality and technical requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, inspection, and marking in accordance with MIL-STD-2073-1E and MIL-STD-129. The contract mandates zero non-conformances in sampling inspections under MIL-STD-1916 or comparable zero-based plans, with attributes assigned verification levels or AQLs based on criticality, and requires all measuring and test equipment to be properly calibrated. Deliveries must be made FOB origin within 164 days, with no quantity variance allowed and inspection and acceptance occurring at the manufacturer’s site. Packaging must comply with DLA procurement standards, including palletization and unit containment codes, and shipment must be addressed to the designated receiving warehouse in Tracy, California. The contract includes requirements for source approval documentation, removal of government identification from non-accepted items, and handling of covered defense information, along with special marking instructions indicating no additional unique identifiers are required. The original required delivery date is June 28, 2027, with a need ship date of January 17, 2027, and the unit price is $21.00 per unit, totaling a contract value of $441.00.
Current-Carrying Wiring Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIO FThis contract specifies the procurement of three radio frequency cable assemblies identified by NSN 5995015086552 and part number 4600355, supplied by Northrop Grumman Systems Corporation. The items must be delivered within 20 days to Fort Riley, Kansas, under FOB origin terms with zero variance in quantity, and are subject to destination inspection and acceptance. Packaging and preservation must strictly comply with MIL-STD-2073-1E and MIL-STD-129, prohibiting any use of mercury or mercury-containing compounds in preservation, packaging, or marking, except for limited functional applications already defined. All packaging and unit identification must align with DLA packaging requirements and authorized unit of issue standards, with no item unique identification required per customer request. The cable assemblies are to be ship via traceable means only, excluding parcel post, and marked according to specified codes without special identifiers. The contract is issued under solicitation SPE4A6-26-T-09ZP by the Department of Defense’s ASC Commodities Division, with technical and quality requirements incorporated by reference from the DLA Master List. The delivery is for a military logistics unit at Fort Riley, and the requirement is linked to project TP 3 with a required delivery date of July 22, 2026. The contractor must adhere to all applicable defense regulations, including restrictions on hazardous materials and standardized marking, and all documentation must follow government-specific controls outlined in the contract data. The point of contact for inquiries is Katherine Zacharias, and the solicitation was posted with a response deadline in August 2026, reflecting its status as a federal procurement under NAICS code 334419.
Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
BOL T, MACHINEThis solicitation, SPE4A6-26-T-10AT, is a total small business set-aside for the procurement of 337 machine bolts with NSN 5306-00-180-2748, under a NAICS code of 332721, for delivery to Robins Air Force Base with a 175-day acceptable delivery order window. Offerors must not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing requirements including the Berry Amendment and Buy American Act, with a reduced threshold of $150,000; non-domestic materials require explicit disclosure. Small business joint ventures must submit specific representations for eligibility under designated categories including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, or historically underutilized business zone small business. Vendors must submit quantity ranges in their quotes due to fluctuating demand, as manual evaluation allows for combined or adjusted quantities without re-solicitation, though this does not apply to Auto IDC. A “No Bid” submission on DIBBS is encouraged for offerors planning to quote after the closing date to avoid assumptions of non-responsiveness. All contractors must register via DLA’s AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with WebServices users required to update their schema per DIBBS notices. Additive manufacturing is prohibited unless explicitly approved by the contracting officer. Fast Pay is not applicable, and APEX Accelerators are available to assist businesses in navigating federal contracting at no cost. The solicitation closes on August 5, 2026, with Marchello Fields as the sole point of contact.
Precision Turned Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
INDICATOR, LIGHTThe contract is for the procurement of three indicator, light units with NSN 6210-01-623-5179 and part number 1852-1-10-20320 from Sorensen Lighted Controls Inc, under solicitation SPE4A6-26-T-09ZS. The total quantity ordered is three units, each priced at $3.00, with delivery required within 20 days of contract award, FOB origin, and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all technical and quality requirements from the DLA Master List of Technical and Quality Requirements take precedence, and all packaging and labeling must follow MIL-STD-129. Palletization is required per DLA’s RP001 packaging standards, and the Unit of Issue and Quantity per Unit Pack must strictly adhere to contract specifications. Shipment must be made via vessel using the fastest traceable means, prohibiting parcel post, and must use the designated freight shipping address in Norfolk, Virginia. The RDD code is 777, the tracking number is V466076196GF45, and the project identifier is 478 TP 2. The origin address for delivery is also in Norfolk, referenced as V46607. The original required delivery date is July 22, 2026, and the solicitation was posted on July 28, 2026, with responses due by August 5, 2026. The contract falls under NAICS code 488190 and is managed by the Department of Defense’s ASC Commodities Division, with Lakisha Atkinson as the primary point of contact. The item is subject to Covered Defense Information protocols and requires removal of government identification from non-accepted supplies. Government-use-only fields contain classification codes for inventory, distribution, and freight control.
Other Support Activities for Air Transportation

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
CABLE ASSEMBLY, RADIThe item is a radio frequency cable assembly with NSN 5995-01-283-3311, with a quantity of 100 units requiring delivery within 163 days after order. This procurement is a total small business set-aside under FAR 19.5, issued by the ASC Commodities Division under the U.S. Department of Defense. The solicitation remains open until August 7, 2026, and is publicly accessible through the DIBBS system. The contract incorporates all technical and quality requirements listed in the DLA Master List, with the applicable revision determined by the solicitation issuance date. Cybersecurity compliance requires CMMC Level 2 certification by a certified third-party assessment organization, and the item is subject to covered defense information protocols. Packaging must adhere to DLA standards, and manufacturers and non-manufacturers must meet tailored higher-level quality requirements. Configuration changes require formal engineering change proposals for any deviation or waiver. All supplies must be marked per physical identification requirements, and any non-accepted items must have government identification removed. Technical data associated with this item is subject to export controls under ITAR or EAR; disclosure to foreign persons, including foreign nationals within the U.S., is prohibited without prior authorization. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export training, and formal approval by DLA.
Electronic Connector Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details